127,237 used machines on RESALE, but how to find them? Machine Search
wet mixer, batch mixer, liquid mixer, chemical mixer, drum mixer -Manufacturer: KWH VEB, wet mixer with ceramic drum -Type: 2841.5.7521 -Drum capacity: 100 liters -Drum speed: 38 rpm -Motor: 1.1 kW -Dimensions total: 1520/670/H930 mm -Weight: 487 kg
Spiral mixer for 50 kg dough or other masses, ERKA, type: SR 35 -In good condition- - Reinforced spiral arm - 2 Time clocks - 2 speeds - Emergency stop - Stainless steel dust cover - Kneader runs with AUTOMATIC and also in manual mode - Boiler and spiral made of stainless steel and in very good condition (no signs of use) - New, long connection cable attached - Electronics in very good condition, everything has been checked Kettle: for 30 kg flour or 50 kg dough El. Connection: 50 Hz, 380 V, 3.0 kW, 6.9 A Engine speeds: 710 and 1,425 rpm. The machine is in very good condition and is ready for immediate use. Visits and test runs are possible.
Vacuum processing plant Manufacturer: Fryma Type: Delmix MZM VK-7 Y.O.M.: 1994 Machine No.: M16397 Pressure inside: -1 bar Batch: 7 l for food, cosmetics, pharmaceuticals in sound condition Mobile Dimensions LWH: 900 x 800 x 1350 mm Weight: approx. 120 kg
Agitator used Manufacturer: unknown Type: unknown Diameter approx. 900 mm Immersion depth approx. 1000 mm Engine: Figure M3AA 180 L 6 15 kW 970 rpm 380 / 660 V Dimensions: 2400 x 1200 x 1900 mm
Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres With head capacitor, Double-acting mechanical seal Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.
Automatic powder dispersing system in EEx protection Make: Pierre Guerin Type: Blending System SM 20 Y.O.M.: 1994 Power: 2.5 kW Plant number: 4461 - 4450 Pump supply and output electro-pneumatic valves as good as new on mobile tub bowl Dimensions LWH: 1500 x 1100 x 1150 mm Weight: approx. 700 kg
High Speed Mixer Manufacturer: GEA Aeromatic Fielder Type PMA 65 Year of manufacture 2004 Serial number 00208.1310 Very good condition High-speed GMP grade mixer granules 316 stainless steel with mirror polished finish for all product contact surfaces. The capacity of the mixing tank is about 65 liters, the minimum product content is 25 kg, depending on the product density. Rotor speed 1 45-450 rpm Speed rotor 2 1500-3000 rpm Choppers The mixing tank lid has a filter housing and an inflatable seal that is automatically activated. The machine has a rinsing system for the bowl and the seals. The mixing bowl has an external stainless steel heater / cooling jacket with 2 bar/80c max, 7 liters/min.
Universal mixer Volume: 400 ltr. Material : areas in stainless steel that are in contact with the product; Main drive: 18 / 22 KW, 1500 - 3000 rpm; Bucket speed: 70 - 140 rpm; 1 x knife head, Knife head motor: 3/4 KW, 1500 - 3000 rpm; Operating pressure: 4 - 6 kg / cm2, max. Pressure: 10 kg / cm2. --> With base; --> 2 identical mixers in stock.
Homogenizing Mixer Manufacturer: Ekato Unimix Type SRT 50 Order# 4808/2, Series# 70888. Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete documentation in ...
Laboratory processing plant UNIMIX Manufacturer: Haagen & Rinau Factory no.: 865 3779 Built: 1979 Permissible operating overpressure: container: 4 bar, tube side: 6 bar Total content: 5.5 l Usable volume: 3 l with speed-controlled agitator with speed-controlled homogenizer integrated heating Vertical stroke (water hydraulics) with temperature regulatioin with control system LWH: 750 x 360 x 850 mm
Professional meat mixer model SN25M is designed for fast and uniform mixing of meat, spices and other ingredients in butcher shops, restaurants, processing plants and professional kitchens. This model is an ideal solution for users who require reliable operation, compact dimensions and high mixing quality in daily professional use. The 50 liter tub capacity allows processing of optimal product quantities, while the operating speed of 17 to 34 rpm ensures efficient and even mixing. The machine is suitable for preparing minced meat, cevap mixtures, sausages, burger mixtures and other meat products. The construction is made of high-quality stainless steel, ensuring long service life, corrosion resistance, high hygiene standards and easy maintenance. The powerful 1.5 kW motor provides stable performance and reliable operation even under intensive use. Compact dimensions allow easy placeme ...
The Symex CML 500 is a high-performance vacuum homogenizing mixer for the production of demanding products in the pharmaceutical and cosmetic industries. The system combines mixing, dispersing, homogenizing, heating, cooling and vacuum processing in a closed system, enabling precise and reproducible production – from pilot scale to industrial application. Such systems are specially designed for complex processes with high quality requirements. Technical Highlights of the Symex CML 500 Containers - Usable volume: approx. 500 litres - Total volume: approx. 780 litres - Minimum volume: approx. 125–160 litres - Pressure range product space: -1 / +2 bar -Product temperature: up to approx. 133 °C -Heating jacket: up to +4 bar / 151 °C -AD 2000 design -The container is designed to be completely pressure- and vacuum-resistant and enables safe processes under demanding ...
Powder dispersing plant Manufacturer: Fristam Type: PE 0320 f Serial number: 0972600002-227933 Built: 2016 Power: 7.5 kW Weight: 160 kg Flow rate: 15-20 m3/h at height=5 m (water) with switchgear, FU speed-controlled Siemens control, connected in the bypass Vessel volume: approx. 450 l Machine in top-notch condition Dimensions LWH: 2100 x 1200 x 1800 mm Total weight: approx. 300 kg
Laboratory mixer Manufacturer: IKA Type: RE 166 A N°: 489272 max. 6000 rpm, min. 50 rpm 190 volts speed-controlled, with control very good condition LWH: 450 x 410 x 760 mm
Professional meat mixer model SN50M is designed for fast and uniform mixing of meat, spices and other ingredients in butcher shops, restaurants, processing plants and professional kitchens. This model is an ideal solution for users who require higher capacity, reliable operation and high mixing quality in daily professional use. The powerful 2200 W motor ensures efficient operation and stable performance even under heavier workloads. The working speed of 25 rpm provides even mixing and optimal preparation of products such as minced meat, sausages, cevap mixtures, burger mixes and other meat products. The construction is made of high-quality stainless steel, ensuring long service life, corrosion resistance, high hygiene standards and easy maintenance. Its robust design and stable structure make this model an excellent choice for daily professional work. Compact external dimensions allo ...
Ultra-Turrax Manufacturer: IKA N°: 0185 Power: max. 15 kW 380 volts max. 1476 rpm good condition LWH: 2750 x 500 x 550 mm
Ultra-Turrax Year built: 1983 Diameter: 220 mm Power: 13.5 kW 380/660 Volt 1460 rpm Wavelength: 1100 mm good condition LWH: 1700 x 400 x 350 mm
Laboratory three-roller Manufacturer: Otto Hermann (Hamburg) N°: 4023 Power: 0.1 kW 220 volts Roll width: 150 mm Ceramic LWH: 340 x 250 x 250 mm
Collomix Rota 30 Paint Mixer The Collomix Rota 30 is a powerful biaxial mixer that has been specially designed for the fast and efficient mixing of paints, varnishes and plasters in closed containers. It is characterized by a biaxial mixing process in which the vessel rotates simultaneously around two axes, which enables mixing times of less than 90 seconds even for heavy materials. Features and ergonomics Automatic clamping: The mixing vessel is automatically fixed and centered after insertion. Safety equipment: Integrated safety door lock and an emergency stop button; the door only opens after the mixing unit has stopped. Handling: Equipped with extendable castors and height-adjustable machine feet for easy positioning. Durability: An integrated "Splash Guard" mechanism protects the drive elements from contamination caused by leaking paint. Areas of application The de ...
Homogenizing Mixer Manufacturer: Becomix Type RW 15 CD Mixing tanks for liquids Stainless steel construction, cool/heatable, pressure and vacuum resistant 24 liters total capacity 15 liters working volume bottom-mounted homogenizing head, top-mounted armature stirrer with scrapers with integrated control unit Tank design: Capacity 24 litres product space/core space PS: -1/2.0 bar product space/core space DS: 134 °C Product space/core space Capacity 1.7 litres Coat space/lid compartment PS: 4.0 bar jacket chamber/lid chamber TS: 152 °C Jacket space/lid chamber Operating data according to acceptance PB: -1/2.0 bar product space/core space PB: 3.0 bar jacket chamber/lid chamber
Planetary stirrer Varimixer Bear R-N 30 Used Varimixer Bear Planetary Stirrer Model N-N 30. It is functional and ready for immediate use. The accessories are included. - 30 litres boiler - incl. whisk, flat stirrer and kneading hook - Protective grille - with a boiler - analog control -Woschow & Co Denmark -Bearmixer
Homogenizing Mixer Manufacturer: Becomix Type RW 15 CD Mixing tanks for liquids Stainless steel construction, cool/heatable, pressure and vacuum resistant 24 liters total capacity 15 liters working volume bottom-mounted homogenizing head, top-mounted armature stirrer with scrapers with integrated control unit Tank design: Capacity 24 litres product space/core space PS: -1/2.0 bar product space/core space DS: 134 °C Product space/core space Capacity 1.7 litres Coat space/lid compartment PS: 4.0 bar jacket chamber/lid chamber TS: 152 °C Jacket space/lid chamber Operating data according to acceptance PB: -1/2.0 bar product space/core space PB: 3.0 bar jacket chamber/lid chamber
Plough-charmed PSM 300 / 1 MK Material : Stainless steel Main drive: 7.5 KW Volume: 300 ltr.; Demonstration machine, 5 - 6 operating hours; --> food suitable. --> mixer available at short notice, price VHB. Facilities: - Mixing plant: ploughshares, - 1 knife head, drive: 4 KW; - Sack shakes, material: stainless steel; - Sack container buckle: at the outlet with manually operated rotary flap; - outlet height of the bagging device: 980 mm; - air flushing on the shaft passages; - Stainless steel control cabinet, fully wired -- > ready for operation; - Machine frame with pallet space, made entirely of stainless steel;
For smaller containers instead of tripod agitators: Agitator REITZ RW0251440200 with 0.25 KW / 1440 rpm and inclined blade stirrer With traverse made of aluminium profiles 45 45 mm. Electric motor: 3 x 230/400 volts, 50 Hz, 0.72 A current, 0.25 kW, 1.66 Nm torque, n = 1440 rpm, IP69K, shaft 20 x 40mm, weight approx. 10 kg. Motor protection socket with switch. Shaft: precision stainless steel shaft D20, length 500 mm, diameter 20 mm, Material stainless steel 1.4571 Coupling: Rigid clutch, bare, material stainless steel 1.4571 Stirrer: Two-wing welded inclined blade stirrer, diameter 200mm, material stainless steel 1.4571
For sale is an EKATO UNIMIX LM5 laboratory mixer, built in 2001 The plant is functional and can be visited and tested on site by appointment. All the main functions are present, including stirring, homogenizing, vacuum operation, and heating and cooling. The vacuum pump is included in the scope of delivery. Condition: The machine is in used, working condition. Cooling is provided by city water. There is a slight leak in the cooling water circuit with low drip loss. According to the current state of knowledge, the function of the system will not be impaired by this. An on-site inspection and functional test is expressly desired. Documentation: Operating instructions available Circuit diagrams available Device folder available Sale exclusively to tradespeople. Subject to prior sale. Sale under application of margin taxation in accordance with sec. 25a of the German VAT ...
Homogeneisive for renting Key figures: • Becomix RW60 CD + Feed container 50L • Working volume: 60L and 50L • Anchor agitator with scrapers and power breakers • Homogenizer with right/left barrel (homogenizing/pumping mode) • Circulation line • CIP • Lid hydraulically liftable • Fully automatic, control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics The machine is fully serviced and is available for rent. We take care of your project "Turn Key" incl. installation at your company as well as commissioning.
Type Barmix 300 New! complete stainless steel 2 speeds (20 and 40 revolutions per minute) 2 rotation directions 3.3 / 4.4 kw fold-up inspection stairs Safety lid Emptying forward via an emptying flap with CE marking Outer dimensions (L x W x H) : 1,750 x 950 x 1,650 mm (open lid: H: 2,100) Loading height ± 1,350 mm Dimensions Drum (L x W x H) : ± 860 x 670 x 565 mm
Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Used Becomix process tank model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a tapered welded bottom. The interior is designed for a maximum allowable operating overpressure of 2 bar (29 psi) at 133°C (273°F) and a maximum allowable external pressure of 1 bar vacuum (15 psi FV) at 5/133°C (41/273°F). The metal's minimum design temperature is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted mixer with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a wheeled stainless steel frame. Room I Room II max./min. pressure PS 1/-1 4 max./min. temperat ...
Stock # U2347-3 Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is diven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.
Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Used Becomix process tank model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a tapered welded bottom. The interior is designed for a maximum allowable operating overpressure of 2 bar (29 psi) at 133°C (273°F) and a maximum allowable external pressure of 1 bar vacuum (15 psi FV) at 5/133°C (41/273°F). The metal's minimum design temperature is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted mixer with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a wheeled stainless steel frame. Room I Room II max./min. pressure PS 1/-1 4 max./min. temperat ...
It is an reconditioned Diosna mixer D 200 Plus (for max. 200kg dough / 125kg flour) for sale. The machine is completely reconditioned, in very good condition, fully functional and repainted. The machine's gearbox has been reconditioned and the machine's electrics are new. The Diosna mixer S 200 Plus is a powerful dough kneading machine for bakeries. It effortlessly processes heavy to medium-weight doughs thanks to a particularly gentle lifting movement. - Dough capacity: max. 200kg dough - Flour capacity: max. 125kg flour - With flour dust cover - Speeds: 2 levels (ideal for mixing and kneading) - Control: Integrated timer for exact kneading times - Material: bowl and kneading arm made of durable stainless steel - Connection 400 V (16 A CEE plug), fuse 16 A A video can be sent on request. Price on request.
Rex Grinder + Mixer is a professional meat grinding and mixing machine designed for use in the meat and food processing industry. It combines grinding and mixing functions in a single unit, providing efficient preparation of various meat products for further processing. The hopper, worm housing, worm, and main machine structure are manufactured from stainless steel, ensuring excellent hygiene, durability, and easy maintenance. The main switch and control system are integrated into the machine housing for safe and convenient operation. The machine is equipped with an electrically interlocked safety guard and a quick-release system for the worm and cutting set, allowing easy cleaning and servicing. The cutting plate diameter of 114 mm ensures efficient processing performance for demanding production environments. Technical Specifications Manufacturer: Düker Rex Machine Type: Grinder ...
Laboratory processing plant (universal machine) Manufacturer: Stephan Type: UMC 12-F No.: 712.673.01 Built: 1986 Power: 1.8 kW 380 V, 50 Hz 150-2800 rpm speed-controlled with double jacket, sight glasses with new control cabinet very good condition on request: with small vacuum pump LBH system: 500 x 400 x 640 mm LBH control cabinet: 600 x 600 x 220 mm LBH pump: 270 x 220 x 210 mm
Eurosmart - 5 pieces mixers - - Auction-ID: A7-48625-138
Technical details Type: Hydraulic mixing bucket / concrete mixing bucket Capacity: 0.5 m³ Configuration: - Hydraulic auger mixing shaft - Internal mixing paddles - Hydraulic motor drive - Excavator quick-coupler mounting system - Hydraulic hose package - Concrete discharge opening Application: - Concrete mixing - Mortar preparation - Grout mixing - Utility and civil engineering works - Fence foundation installation - Remote concrete production Carrier compatibility: - Compact excavators - Midi excavators - Backhoe loaders Recommended carrier size: Approx. 3–8 tonne machines Construction: - Heavy-duty steel bucket body - Integrated hydraulic mixing system Condition: Used, near new condition Observed condition: - Mixing paddles show minimal wear - Original paint largely intact on mixing components - Hydraulic motor appears clean and undamaged - Hydraulic f ...
Jet-flow agitator Manufacturer: IKA Type: RT 220 KT N°: 0335 in EEx protection Power: 7.5 kW 380 V, 50 Hz 1450 rpm Built: 1995 (?) LWH: 1800 x 350 x 450 mm Weight: approx. 200 kg
Jet-stream agitator Manufacturer: IKA Type: RT 250 KT N°: 0345 Power: 15 kW 380 V, 50 Hz 1450 rpm in EEx protection LWH: 2200 x 380 x 500 mm Weight: approx. 350 kg
General Description Heavy-duty horizontal Z-arm (Sigma blade) mixer with a nominal bowl capacity of 600 litres . Designed for mixing heavy doughs and food products such as biscuit dough, cookie dough, pastry dough, cracker dough, confectionery masses, and similar applications. The original manufacturer could not be identified from the available photographs. Technical Details Manufacturer: Unknown Model: Unknown Machine type: Horizontal Z-arm (Sigma blade) mixer Bowl capacity: 600 L Mixing system: Twin Z-shaped mixing blades Control system: XINJE touchscreen PLC/HMI Drive: Lenze frequency inverter Hydraulic lid lifting system Hydraulic discharge door Stainless steel mixing trough Heavy-duty welded steel frame Pneumatic actuators Condition: Used Condition Overall good used industrial condition. The stainless steel mixing trough appears complete and the twin Z blades s ...
Various mix and bake tools & bowls. Auction-ID: A1-47436-133
Inline homogenizer Manufacturer: Gerstenberg Schröder Type: RL 280/170 Built: 2006 N°: 4299-2-197917 Power: 50 hp Volume: 6 l Speed: 1330 rpm at 50 Hz as good as new Weight: approx. 850 kg Application: Margarine, mayonnaise, dressings, sauces (continuous production) Capacity: 5000-10000 kg/h (for oil content 80%) LWH: 1800 x 800 x 900 mm
maximum number of results exceeded
please refine your search
150 € 
