We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,260 used machines on RESALE, but how to find them? Machine Search
used
Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.
Year of construction: 2000 Generator: 70 Ampere - multipulse Control: Mitsubishi - 64 bit CNC Travel (X, Y, Z): 700 x 1350 x 500 mm Working container (W x D x H): 1000 x 1600 x 550 mm Work table (W x D): 900 x 1500 mm Load capacity: 3000 kg Electrode changer: 10-fold pick-up linear changer Accessories: - CO2 fire extinguishing system - Cartridge filter system Status: obsolete Price: on request
used
Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible.
used
Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.
used
In addition to the highlighted features, it is worth mentioning the controlled C axis with EROWA connection. Electrode change with 14 positions. Monitor overhauled with new LCD screen.
used
X axis (longitudinal) 400 mm Y axis (transverse) 250 mm Z axis (vertical) 256 mm Max length of the piece 860 mm Max workpiece width 580 mm Maximum workpiece weight 850 kg Type of the CN Agiematic Length of the tank 810 mm Width of the tank 580 mm Height of the tank 250 mm Max height of the piece 250 mm Automatic threading Yes Weight approx. in kg. 2350
used
Lach Dia 2100 mini Year 2010 Technical data: Tool diameter max.400mm Profile width max. 70mm
used
- Travel: 400 x 350 x 350 mm - Table: 575 x 500 mm - Workpiece weight: 700 kg - Generator genius - 80 amps generator power - Rotation spindle - Controlled C-axis - Internal controlled heat exchanger - Fire extinguishing system Kraft & Bauer - Exhaust system - Air connection for table chuck - EROWA quill chuck ITS - 24-fold electrode changer
used
X axis: 900 mm Y axis: 400 mm U axis: 80 mm V axis: 80 mm Z-axis: 400 mm Max workpiece size: 1300x800x400 mm Max workpiece weight: 1000 Kgs Max table speed: 900 mm/min Max conical cutting angle: ±30º/45 mm Wire Ø: 0.1-0.3 mm Type of wire spool: DIN 125 - DIN 160 (6 kg max) Min hole Ø: 2 mm Year: 2000 Equipped with: Control: ONA
used
X axis: 550 mm Y axis: 300 mm Z axis: 400 mm U-axis: 140 mm V-axis: 140 mm Max workpiece size: 1050x800x400 mm Max workpiece weight: 3000 Kgs Max table speed: 2000 mm/min Max conical cutting angle: ±30º/95 mm Wire diameter: 0.1-0.35 mm Type of wire spool: DIN 100-125-160-200-DIN 355 (45 kg max) Min hole Ø: 1.5 mm Max. power: 14 KVA Year: 2005 Equipped with: Control: ONA
used
X axis: 550 mm Y axis: 370 mm U axis: 120 mm V axis: 120 mm Z axis: 310 mm Fast forward (X, Y, Z / U, V): 900 mm / min / 450 mm / min Max work piece weight: 1000 kgs Power: 13 KVA Year 2002 Equipped with: Control: FANUC 180 iS-W Refrigerator: Yes
used
Dissolution of the company due to death During his lifetime, a new pump was installed due to the defect of the pump. Still, we don't have a function. Weight 800kg
used
Submerged Wire FANUC ROBOCUT Alpha 1-ib with auto wire thread, Information about technical data are not binding., Machine available subject to prior sale., X-y-z axes travel: 550x370x310 mm, U-v axes travel: 120x120 mm, Taper angle: ± 30°, Automatic wire threading and rethreading: yes, Maximum workpiece dimension: 1000x800x300 mm, Cnc: FANUC 180is - WB, Filter type: Cartridge, Weight: 3.000 Kg, Accessories: Chiller unit
used
X-Axis travel 350 mm Y-Axis travel 250 mm Z-Axis travel 300 mm X-Y-Z axes speed 6 - 6 - 15 m/min Table length 500 mm Table width 400 mm Work tank size 790 x 530 x 350 mm Workpiece weight 500 kg Linear tool changer 4 (Std. tooling) / 5 (Combi tooling) Rotary tool changer 16-80 pos. (Std. tooling) / 32-160 pos. (Combi tooling) Dimensions L 1900 x W 1690 x H 2398 mm Weight 2800 kg
used
Type: MATRA TAPE CUT W2 Parameters: 500 mm, 350 mm Manufacturer: Fanuc Year of production / SO / GO: 1991 / - / - Description: The machine is in good technical condition. X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Voltage: 200V AC + -10%; three-phase; 50 / 60Hz Cooling water temperature: 10-25 ° C Water flow: 15-35 liters / minute Sold including: 1st filter SW37 D340xd46xH450mm - 3pcs 2.Savah RVH600 - anti-rusting workpiece - 5 liters 3.Eleion plus - resin to reduce the conductivity of working water - 50 liter barrel - full up to 3/4 volume 4. Various small spare parts - see. photo- Dimensions L x W x H: 3500 x 2400 x 2400 mm Weight: 2300kg Upon agreement, the possibility of a tour in progress.
used
Technical details x-way 350 mm y-way 250 mm z-way 256 mm Max. Workpiece dimensions 750 x 550 x 250 mm U-axis +/- 70 mm V-axis +/- 70 mm Rapid traverse X / Y / Z axis 1.5 / 1.5 / 0.6 m / min Rapid traverse U / V-axis 0.6 m / min Max. Taper 30 ° / 100 mm control AGIEVISION Wire diameter 0.1 - 0.33 mm Wire speed 60-300 mm / sec Wire feeder semi-automatic Total power requirement 9.1 kVA Machine weight approx. 3.6 t Dimensions L x W x H 2.21 x 2.21 x 2.22 m
used
The system had only been running for a few hundred hours and, according to the manufacturer, is fully equipped. As we were unable to use this system for its intended purpose, the machine stood unused for a long time and was only serviced at regular intervals. It is ready for viewings until it is sold.
used
Description: Operating voltage: 400 V Frequency: 50 Hz Serial number: 2.0485 Connection: 5 kVA Table dimensions: 570 x 420 mm With 4 grooves X-axis: approx. 400 mm Y-axis: approx. 300 mm Z-axis: approx. 400 mm With 2-fold electrode changer and EROWA clamping head weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 950 x 2,400 mm
used
Description: Electrode masses with 3CNC axes 300 kg with C-axis 50 kg , Workpiece weight 850 dN , x-motion: 500 mm, y-motion: 400 mm, z-motion: 330 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,400 x 2,700 x 3,200 mm
used
Description: Serial number: 60318 Technical data (without guarantee): Table size X x Y: 600 x 400 mm Color path X x Y: 350 x 250 mm Z: 340 mm Workpiece height: max. 240 mm Table quill: max. 520 mm Generator: 20 - 120 A With accessories including EROWA electrode holders (approx. 28 pieces) as shown in the pictures and technical documentation as shown in the pictures weight approx.: 3,900 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,700 x 2,100 mm
used
Description: Dielectric container ,630 x 1100 x 750 mm Filling height approx. 400 mm table surface area l x w : 500x400 mm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 2,300 mm
used
Disc eroding machine for complete machining of rotationally symmetrical workpieces with ultra-hard cutting edges cutting materials. The workpieces are picked up flying (hanging vertically). Accesories Mechanical vapor separator N280, Disc changer for up to 6 eroding/grinding discs Adaptation to the A-axis on HSK 63-A-E Test mandrel HSK63A Glass scales on the linear axes X, Y & Z, Software package additional functions for metal working tools, Ex Level Pro Software, 3 grinding wheel changing elements Automatic shutter, Automatic central lubrication, Automatic fire extinguishing device, Coolant system with pump & coolant unit., Workpiece outside diameter: max 320 mm, Workpiece length: Max. 250 mm, workpiece length: max. 250 mm, Tool outside diameter: Max. 200 mm, Bore diameter: Max. 60 mm, bore diameter: Max. 60 mm, Travel X1: 520 mm, Travel path X1: 520 mm, Travel Y1: 970 mm, Travel path Y ...
used
Disc eroding machine for complete machining of rotationally symmetrical workpieces with ultra-hard cutting edges cutting materials. The workpieces are picked up flying (hanging vertically). Accesories: Mechanical vapor separator N280, Disc changer for up to 6 eroding/grinding discs, Adaptation to the A-axis on HSK 63-A-E Test mandrel HSK63A, Glass scales on the linear axes X, Y & Z, Software package additional functions for metal working tools, Ex Level Pro Software, 3 grinding wheel changing elements Automatic closure flap Automatic central lubrication Automatic fire extinguishing device Coolant system with pump & cooling unit, Workpiece outside diameter: max 320 mm, Workpiece length: Max. 250 mm, workpiece length: max. 250 mm, Tool outside diameter: Max. 200 mm, Bore diameter: Max. 60 mm, bore diameter: Max. 60 mm, Travel X1: 520 mm, Travel path X1: 520 mm, Travel Y1: 970 mm, Travel pa ...
used
Die Sinking Machine CDM Rovella 3.40 ASTRO, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 400 mm, Cross travel y axis: 300 mm, Vertical travel z axis: 200+200 mm, Working table size: 650x400 mm, Work tank dimension: 1070x550x360 mm, Max weight over table: 750 Kg, Max electrode weight: 70 Kg, Power supply: ASTRO, Accessories: 3R Sistem, Max working current: 35 A, Filter type: Cartridge, Weight: 1.800 Kg
used
weight: 3000 kg voltage: 3 x 400 V output: 8,3 kw ampere: 12 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
frequency: 50 Hz weight: 3000 kg voltage: 3 x 400 V output: 8,3 kw ampere: 12 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
voltage: 3 x 400 V weight: 3600 kg output: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Serial number ,31 Device number 010 Attention: not functional weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,400 x 2,250 mm
used
Description: Workpiece depth above bed 880 mm Workpiece depth above support 680 mm workpiece diameter 350mm Weight of the workpiece 800 kg Machine has already been dismantled x-motion: 500 mm, y-motion: 350 mm, z-motion: 500 mm, control: Agie Vision, table surface area l x w : 800x600 mm, weight approx.: 3,900 kg, Approx. Onsite Dimension. (l x w x h): 2,855 x 2,135 x 2,965 mm
used
Description: Machine no 80-4056-0134 Ampere 60 A Workpiece weight 450 kg Tool changing device 8 x-motion: 600 mm, y-motion: 400 mm, z-motion: 250 mm, control: Makino MGE20, table surface area l x w : 750x550 mm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 3,500 x 3,000 mm
used
Description: Complete wth documents z-motion: 300 mm, x-motion: 550 mm, y-motion: 350 mm, control: Sodick LN1W, table surface area l x w : 790 x 500 mm, weight approx.: 4,200 kg, Approx. Onsite Dimension. (l x w x h): 2,700 x 2,800 x 2,400 mm
used
Description: Working capacity 500 x 320 x 320 mm Technical documentation and instruction manual included.  , weight approx.: 2,150 kg, Approx. Onsite Dimension. (l x w x h): 4,300 x 1,600 x 2,000 mm
used
Description: maximum workpiece weight 500 kg auxiliary table travel 120x120 mm wire feed speed 420 mm/s  , Includes Machine body 2250x2400x2120 mm Unit CKDHYW 1947C-7SD1G , collecting unit 700 x 700 x 1000 mm , JUMBO FEEDER reel holder unit 400x400x2100 mm Chiller unit 700x500x600 mm The winning bidder-buyer must reimburse Surplex for supervision costs of €300.00 per day. z-motion: 250 mm, x-motion: 370 mm, y-motion: 270 mm, control: SODICK LQ33W, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 2,250 x 2,400 x 2,120 mm
used
Description: maximum workpiece weight 1000 kg auxiliary table travel 120x120 mm wire feed speed 420 mm/s  , Includes Machine body ,2600x2800x2310 mm JUMBO FEEDER coil holder unit 400x400x2100 mm External chiller unit TFE 700x400x1200 The winning bidder-buyer must reimburse Surplex for supervision costs of €300.00 per day. z-motion: 350 mm, x-motion: 570 mm, y-motion: 370 mm, control: SODICK LP33W, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 2,800 x 2,310 mm
used
Description: serial number: 034-006 travels: X-axis: 350 mm Y-axis: 250 mm Z-axis: 350 mm C-axis: 0 - 60 rpm max. workpiece dimensions: 650 x 580 x 250 mm max. workpiece weight: 400 kg distance table - quill: 170 - 520 mm  , please also have a look at the video of this machine x-motion: 350 mm, y-motion: 250 mm, z-motion: 350 mm, control: Agiematic T, weight approx.: 2,600 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 2,500 x 2,600 mm
used
Description: technical data (without warranty): - travel X, Y, Z: 600 x 400 x 350 mm - travel U, V: 120 x 120 mm - work table size: 836 x 593 mm - inner work tank size: 1066 x 729 mm - maximum work piece height: 340 mm - maximum work piece weight: 1000 kg - distance floor to table top: 995 mm - wire tension: 3-23 N - wire feed speed: 420 mm/s - wire diameter: 0.10-0.33 mm - wire bobbin volume: 8 kg - machine tool dimension: 2460 x 2640 x 2390 mm - machine installation space: 3550 x 3700 mm  , z-motion: 350 mm, x-motion: 600 mm, y-motion: 400 mm, table surface area l x w : 836 x 593 mm, weight approx.: 4,950 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 3,700 x 2,390 mm
used
Description: Serial Number:55DR1663 Max. Workpiece dimensions: 800x600x215 mm Max. Workpiece weight: 500 kg Table dimensions: 640 x 540 mm Travels: X-axis: 400 mm Y-axis: 300 mm Z-axis: 220 mm Table rapid traverse rate: 1300 mm/min Wire diameter: 0,1 to 0,3 mm Max. Wire feed speed: 23 m/min Wire tension: 0,5 to 25 n Taper: OPTOLinear T/C device Taper angle: 15º (with 200mm plate thickness) Working Hours 24073 Dielectric Fluid Reservoir: Working tank volume: 550 litres Filtration flow rate: 50 l/min Water purifier: 10 litres Other features: Superfinishing Rugosity less than Ra 0.2 weight approx.: 2,980 kg, Approx. Onsite Dimension. (l x w x h): 1,910 x 2,702 x 2,015 mm
used
Description: machine number: 575158 control: Multipulse travels: X-axis: 550 mm Y-axis: 850 mm Z-axis: 450 mm table dimensions: 800 x 1100 mm max. table load: 2000 kg x-motion: 550 mm, y-motion: 850 mm, z-motion: 450 mm, control: Multipulse, table surface area l x w : 800x1100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,650 x 2,800 mm
used
CONTROLS CNC controls AGIE WORKING RANGE -WIRE CUTTING- worpiece length max.: 750 mm worpiece width (max): 550 mm X-axis travel: 350 mm Y-axis travel: 250 mm U-axis travel: 70 mm V-axis travel: 70 mm TABLE workpiece load (max): 450 kg WIRE SYSTEM wire diameter (min): 0.2 mm wire diameter (max): 0.33 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2000 mm space requirements -front/back-: 1700 mm total height: 2200 mm total weight approx.: 2500 kg
used
CONTROLS CNC controls WORKING RANGE -CUBIC- X-axis travel: 250 mm Y-axis travel: 160 mm Z-axis travel: 250 mm TECHNICAL SPECIFICATION Table-size : 480 mm Table-size : 330 mm Adjustment of x-axis: 250 mm Adjustment of y-axis: 160 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1200 mm space requirements -front/back-: 1200 mm total height: 2500 mm total weight approx.: 1000 kg
used
This Exeron EDM 310 MF 20 Erosion machine was manufactured in the year 2008 in Germany. It is equipped with an Exeron control unit. The machine was fully retrofitted in 2023 with 6 month warranty.
used
Tapping chucks, thread chucks, tapping chucks, tapping attachments -with slip clutch -Integrated reversing gear with fast reverse -Counter holder for the return is missing -Thread sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.3 kg
used
Tapping chucks, thread chucks, tapping chucks, tapping attachments -with slip clutch -Integrated reversing gear with fast reverse -Thread sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.1 kg
used
Description: Serial number: 01123 Operating voltage: 220 V Frequency: 50 Hz Connection: 1.5 kVA Dimensions of the magnetic clamping plate: 160 x 90 mm Incl. three-axis digital display Approx. Onsite Dimension. (l x w x h): 1,100 x 500 x 1,000 mm, weight approx.: 200 kg
used
Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)
used
Key data: 400 mm, 300 mm, 250 mm
Type: Wire EDM Machine Ident Number: 22606 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: SLC 400 G Premium + Year of construction: 2015 Travel: 400 x 300 x 250 mm [ X x Y x Z ] max. workpiece weight: 500 kg U / V axis: 150 x 150 mm Cutting in a water bath Radiator Working tank 850 x 610 mm Taper +/- 25° at tool height 130 mm Control SPW
used
Key data: 500 mm, 350 mm, 250 mm
Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W
used
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22409 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 350 GammaTec Year of construction: 2006 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece weight: 500 kg Electrode changer: 16-fold C-axis
used
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22607 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 35P Year of construction: 2002 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 400 mm max. workpiece size Z: 300 mm max. workpiece weight: 500 kg max. electrode weight: 50 kg Tool changer: 16-speed C-axis Generator: 64 amps lowerable container Erowa ITS50 Clamping Head
used
Key data: 750 mm, 550 mm
Type: Die-sinking EDM machine Ident Number: 22605 Category: Die-sinking EDM machines / EDM Manufacturer: Sodick Model: AG 60 L Year of construction: 2012 Travel: 600 x 420 x 370 mm [ X x Y x Z ] Table size X: 750 mm Table size Y: 550 mm max. workpiece weight: 1500 kg Electrode changer: 6-fold Control: LN2 Quill clamping fixture: EROWA ITS Working container: 950 x 740 x 450 mm