edm used for sale

Machine in perfect condition, currently in operation. Machine price with Erowa charger and magnetic plates

X : 320 mm Y : 220 mm Z : 220 mm Machine is in good working condition

Wire erosion machine make AGIE type Agiecut AC 100Machine -No: 117 built in 1988Working area X: 300 mmWorking area Y: 200 mmWorking area Z: 250 mmTable length: 510 mmTable width: 580 mmWorkpiece dimensions: 810 x 580 x 250 mmWorkpiece weight max.: 200 kgWire diameter: 0.03 - 0.3 mmTotal power requirement: 10 kWWeight approx: 3.0 tonsWith- Agiepuls MM- Operating hours 33976 hrs.used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manufacturer: AEG-ELOTHERM Type: ELBOMAT 443B Year of construction: 1994

It is an innovated Roboform 30 plunger machine for PENTA CNC 60, including Penta CNC control system, C-box and motors on X and Y axes, new pump. Clamping Erow. Linear magazine for 4 electrodes.

Control LN1W Travel X/Y/Z 300/200/200 mm Table size: 536x337 mm Container: 750x500 mm Workpiece weight: max. 300 KG Conicity angle: +- 20°/ 80mm Machine dimensions: WxDxH 1300x2400x2210 mm Machine weight: 2500 KG Bain-marie; automatic wire threading

Sinker, broken, uninstalled. Corrupted control program. Travel (X,Y Axes) - 300x200 Quill stroke (Z Axis) - 150 max. workpiece dimensions (WxDxH) - 600x300x240

Machine is in very good condition X : 600 mm Y : 400 mm Z : 350 mm

X : 350 mm Y : 250 mm Z : 250 mm Machine is in good condition

CNC controller: FP 80 Axes: X-axis travel mm: 300 Y-axis travel mm: 250 Z-axis travel mm: 250 Distance between table surface and electrode clamp surface (for standard electrode and table): 223 - 473 Max. Electrode weight kg: 25 Worktable: Table dimensions mm: 500x350 Maximum workpiece size (W × D × H)) mm: 740x470x130 Max. workpiece weight kg: 550 Working tank inner dimensions (W x D x H) mm: 770x500x230 Dielectric fluid reservoir capacity L: 165 Dielectric fluid filter method: paper filter Basic machine dimensions / weight: Length mm: 1.460 Width mm: 1.900 Height mm: 2.075 Weight kg: 2.000

Table size 450 x 210 mm Longitudinal travel 300 mm Cross travel 200 mm Vertical travel 370 mm Equipped with: Digital Coolant

AGIECUT CLASSIC 2S wire cutter 2004 AGIECUT CLASSIC 2S

Machine is in very good condition X movement (mm) : 350 Y movement (mm) : 255 Z movement (mm) : 255

X : 550 mm Y : 350 mm Z : 300 mm Machine is in good condition

table dimensions 450x350 mm X, Y, Z axis travel 270x170x200 mm weight 300 kg

Agie KOPF 30 in good condition Make: Agie Modle: Kopf 30 Year: 1983

Wire erosion for sale X : 500 mm Y : 350 mm Z : 300 mm

X/Y/Z axis travel (mm):750 x 500 x 400 U/V axis travel (mm):770 x 520 Work tank dimensions (W x D x H, mm):1264 x 973 Max. workpiece weight (kg):1500 Distance from floor to table top (mm):1000 Machine dimensions (W x D x H, mm):2100 x 2860 x 2390 Machine weight (kg):5600

Manufacturer Mitsubishi Model MV1200S Year 2014 Imported to Germany in October 2022 Fully maintained

Sodick AQ535L WEDM machine. Well looked after and still in production. Linear motors, so still accurate. With wire chopper.

Control: Makino Generator: MGW-R Max.travel range: X 600 mm Y 400 mm Z 250 mm U x V axis travel +/- 75 mm Work tank dimensions: 920 x 600 mm Dialectric tank capacity: 900l Made in Japan

Control: Sodick Max.travel range: X 600 mm Y 400 mm Z 350 mm U x V axis travel 150 x 150 mm Work tank dimensions: 1050 x 710 mm Dialectric tank capacity: 800l Made in Japan

Tank dimensions: 1000x600x375 mm Working table: 650x400 mm Permissible weight on the table: 1100 kgs Travels (X,Y,Z): 500x300x200 mm Electrode weight: 250 kgs Generator: S2000-60 Power: 9 Kw Equipped with: POLY-SPARK

max. workpiece dimensions length x width x height 750 x 550 x 250 mm X / Y / Z axes 350 / 250 / 256 mm

Manufacturer: Fanuc Year of manufacture/SO/GO: 2000/-/- The machine is in good technical condition.

Key data: 500 mm, 3 0, 3500 kg

Travel X 500 mm / Y 350 MM / Z 300 mm Water bath machine Automatic wire threading incl. radiator

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure,, Software path management,, Software end mill (207/208),, Software disc-shaped workpieces on the front side (221/222/223/224),, Software profiled workpieces (233/234/239/240),, Software hogger, hogger profiled (255/256/257/258/260/261/262/263), Software for disc-shaped workpieces (264/265),, Software for end and joint milling cutters (267/268/277/278),, Software step tools (271),, Software scoring saws (299),, Software saws flat tooth (301), Software saws one sided with bevel (302/303),, Software saws alternating teeth (304),, Software saws trapezoid trapezoid tooth (309),, Software saws flat roof tooth (310),, Software saws flat-tra ...

Due to the increase in production capacity and the incorporation of new equipment, we offer the following WEDM (wire electroerosion) machine for sale: Sodick AQ400L. Machine in operation: it can be seen and tested. Extras: it has a wire cutter and accessories for cutting with a Taperflex table (high inclinations).

Sinking machine ONA BN-180 Electrode holder stroke 150mm Table stroke H 525mm x long 300 x width 150 Tray 600 x 400 x 225 Permissible table mass 450kg S2000 / 30A generator Filter + instructions and manuals + 4 drums of 200 l of dielectric.

Charmilles Robofil 310 CNC type Year: 1994 X axis Axis shift of 400 mm Axis Y axis shift 250 mm Z-axis travel 400 mm The stroke of the U axis is 400 mm The stroke of the V-axis 250 mm We attach 8 cartons of brass wire 0.25 and all the instructions including one in Polish

Charmilles Robofil 4020 Year 1996 Travel: X-450, Y-320, Z-270, U-100, V-100 Max cutting angle: 30 degrees Max workpiece weight: 500 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detal - 990 x 505 x 270

The machine is fully operational, bought in November 2016. Used for their own needs (tool room at the production plant). Recently replaced: kerosene filters, potentiometer in the remote control, complete Z axis with motor, bearings and propeller, cards in the control, C axis electro-brake, it is possible to check the machine. The set includes a second set of kerosene filters, holders (various types), about 16 pcs, complete documentation, user manual, technological manual, electrical diagram. Technical data: Feeds: x axis 900 mm y axis 680 mm axis z 405 mm POCON 60 control Table dimensions 1200 x 850 mm Dielectric - system capacity 800 l Machine weight 3.70 t

-First commissioning in 1985; Attention! There is a defect on the changer, C-axis shows temporary errors; -Technical information without guarantee; -X-axis: 320mm; -Y-axis: 220mm; -Z-axis: 320mm; -C-axis: 360°; -Working surface: 560x400mm; -Workpiece weight: 500kg; -Usable area: 880x550mm; -Control: Charmilles; -Weight approx. 4500 kg; -Dimensions (LxWxH) approx. 3000 x 1610 x 2460 mm; -We offer this machine as a spare parts donor.

Table Travel (X) mm 400 Table Travel (Y) mm 300 Servo Travel (W) mm 345 Guide Travel mm 200 Manual Guide Travel mm 150 Max. Workpiece Dimensions (WxD) mm 990 x 460 Guide(30mm) to Work Table mm 5 - 355 Max. Workpiece Weight kg 450 Table Size (WxD) mm 600 x 300

1.Work table size: 700x350 mm 2.X/Y/Z travel: 400x300x200+200 mm 3.Electrode plate to work table: 200-650 mm 4.Max. Electrode weight: 90 kgs 5.Max. Workpiece weight: 600 kgs 6.Work tank size: 1070x580x370 mm 7.Weight of machine unit: 1300 kgs 8.Outside dimension: 1600x1400x2300 mm

CNC control FANUC 18i; Travel (X,Y,Z): 320 x 220 x 180 [mm], Piece maximum dimensions: 650 x 420 [mm], piece maximum thickness: 160 [mm], Maximum weight: 350 [kg], Table displacement speed: 900 [mm/min}, Wire run-off speed: 0 - 10 [m/min], Wire tension: 80 to 2500 [gr], Wire guide: Ø 0.25 [mm], Container capacity: 260 [l], Dimensions: 3 200 x 2 200 x 2 000 [mm], Weight: approx. 1,500 kg The additional costs are dismantling and loading costs.

Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.

Weight: 3.1t, with controls, changeover and documentation, without magnetic plate.

The machine has been standing still for a couple of years now, so it needs a complete overhaul, it is not possible to see it in operation. - tank dimensions: 1105 x 765 x 435 [mm] - maxi dimensions of the pieces: 1100 x 760 x 360 [mm] - maxi piece weight: 800 [kg] - strokes: X x Y x Z: 450 x 320 x 162 [mm] - U strokes: +/- 50 [mm] - V strokes: +/- 50 [mm] - solution: 1 [µm] - wire unwinding speed: 2 - 15 [m / min] - rake angle: +/- 30 ° - tank dimensions: 1150 x 900 x 2280 [mm] - tank capacity: 1000 [l] - dimensions: 3700 x 2700 x 2300 - weight: 4930 [kg]

Connected load: 9kVA, weight: 4.06t, operational hours: ca. 90,000h.

Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.

Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible.

X-travel: 700mm, y-travel: 500mm, z-travel: 315mm, max. load: 1t, max. workpiece dimensions: 900x700x300mm, length: 3100mm, width: 2550mm, height: 2245mm, weight: 5t, including documentation.

X 550 Y 400 With 350 U 360 Full feedback - optical scales 0.0001 mm Table dimensions: 750x550 The internal dimensions of the bathtub: 1100x950x500 Max workpiece weight: 1000 kg Max weight of the electrode: 50 kg Machine weight: 6,440 kg IQ option

There are three AGIE CUT CNC 100 available, year of construction 1/2/3: 1980/1979/1979, with accessories, machine 1 and 2 are functional, machine 3 serves as a source for spare parts.