edm cnc used for sale

Manufacturer: HEAD / KENT Model: CUV-10 (KMV 10) Year: 1999 Robust CNC vertical machining center, Meehanite cast iron construction, suitable for machining single parts and small to medium series. Numerical control: FANUC OMD Structure: Meehanite cast iron Turcite B-coated slides Rigid thread Portable electronic crank Full protective guard Sprinkler system Work light and end-of-cycle lamp Toolbox Races: X: 1,020 mm Y: 510 mm Z: 510 mm Distance between spindle nose and table: 105 to 740 mm Table: Dimensions: 1,200 × 600 mm T-slots: 18 mm – 3 grooves Max. permissible load: 1,000 kg Spindle: Speed: 30 – 7,500 rpm Transmission: ZF gearbox – 2 ranges Cone: BT 40 Engine power: 11 kW Feeds: Fast feed (X,Y,Z): 24 m/min Working feed: 1 – 10,000 mm/min Tool changer: Capacity: 20 tools Max. tool weight: 6 kg Bidirectional selection Machine dimensions: 2,880 × 2,420 × 2,980 mm Floor space ...

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4011

CNC control: MSX-850 III Number of axes: 2 Strokes: X = 260 mm, Z = 590 mm Spindle speed: 50 – 5000 rpm Power: 15 kW Bar capacity: Ø 65 mm Spindle bore: 73 mm Turret : 12 stations (BMT) Max turning diameter: 356 mm Max turning length: 510 mm Chip conveyor: yes 235L high-pressure pump: yes Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4004

Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Auction-ID: A1-50690-11

- Consisting of approximately: - 10 x complete sets with HSK F63 tool holder, collet and cutter. - 6 x complete sets with ISO 30 tool holder, collet and cutter. - 3 x HSK F63 strain clamping tool holder. - 10 x cylindrical handle cutting tools. - 12 x tapered handle cutting tools. - 10 x tweezers of various sizes. - Blades. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-27

Program run 5700 h, spindle hours 4800 h, spindle holder ISO 40, internal coolant supply, Heaxgon touch probe, without NC clamp Auction-ID: A1-50626-15

- Total installed power approx. 22 KW. - Usable working area approx. 4000 x 1400 mm. - Maximum travel speed in x-y-z directions: 100-100-25 m/min. - Axis C. - Tool magazine with 6 positions. - Electrospindle: power 11 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder. - Adjustable saw group. - Vertical holes in the x-axis direction: 10. - Vertical holes in the y-axis direction: 8. - Horizontal holes in the x-axis direction: 2 + 2. - Horizontal holes in the y-axis direction: 1 + 1. - Remote control panel. - 8 benches with 8 suction cups in total. - Vacuum pump NASH_ELMO 2BL2141-2AH50-4A-Z with a capacity of 100 m³/h. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-26

- Consisting of approximately: - 13 x complete sets with ISO 30 tool holder, collet and cutting tool. - 34 x ISO 30 tool holder with collet. - 16 x tweezers. - 3 x clamping nuts for tool holders. - 2 x drilling aggregates with 4 heads, positionable 0°-360°. - 1 x milling aggregate with fixed inclination. - 13 x cutting tools. - 1 x Hydraulic Pump - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-23

LVD PPEB 220 Hydraulic Brake Type: Industrial Hydraulic Press Brake Brand: LVD Model/series: PPEB Bending force: 220 tons Control: Numerical / Electronic Control Actuation: Hydraulic Use: bending and forming of sheet metal and metal parts Marking: CE Manufacture: LVD Company N.V., Belgium Please note that the tools are not included in the sale Auction-ID: A3-46137-35248

- Usable working area approx. 5000 x 1400 mm. - Axis C. - Tool magazine with 18 positions. - Electrospindle: power 7.50 KW, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 11. - Vertical holes in the y-axis direction: 11. - Horizontal holes in the x-axis direction: 1 + 1. - Horizontal holes in the y-axis direction: 1 + 1. - Edging unit with edge loader for 2 coils. - IMA numerical control. - 8 benches. - Lifting modules for heavy parts. - SIEMENS 2BL1100-2NC00-1S-Z vacuum pump, 2.35 KW motor. - Tools (10) and add-ons (3) that appear in the photographs are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-18

- Total installed power approx. 15 KW. - Usable working area approx. 2900 x 1000 mm. - Passage height on panel 180 mm. - X-axis travel: 3300 mm, y-axis travel: 1280 mm, z-axis travel: 200 mm. - Maximum travel speed in x-y-z directions: 67-67-22 m/min. - Electrospindle with manual tool change. - Saw group for grooving in the direction of the X-axis. - Vertical holes in the x-axis direction: 5. - Vertical holes in the y-axis direction: 6. - Horizontal holes in the x-axis direction: 1 + 1 (HEAD IS MISSING). - Horizontal holes in the y-axis direction: 1 + 1. - ESA KVARA 6 numerical control. - Remote control panel. - 6 benches with 14 suction cups in total. - BECKER vacuum pump. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-14

- Total installed power approx. 60 KW. - Dimensions of the aluminium work table approx. 6700 x 1570 mm. - Z-axis travel 340 mm. - Tool magazine with 12 positions. - Electrospindle: power 7.50 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 5. - Automatic lubrication. - Numerical control NUM. - Remote control panel. - BECKER VTLF 250 vacuum pump with a capacity of 248 m³/h. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-1

Machine is equipped with: - live tooling - C-axis - chip conveyor - tailstock - tool setter - tooling in turret as showed in picture Auction-ID: A1-50690-12

CNC lathe Okuma LU 45 M -3000 Control: OSP-P200L Year of Make: 2009 Internal machine no. 81 max. turning diameter 660 mm max. turning length 3,000 mm Spindle bore Ø 260 mm Spindle speed 2,800 rpm m Travels: X-axis 420 mm Z-axis 3,025 mm Spindle power: 30 kW Accessories - Chip conveyors - Tool turret with 12 places - Tools

CNC UNIVERSAL MILLING MACHINE Inv. No. 13.165J1 Make MIKRON Model WF 31DCM Machine No. Control HEIDENHAIN TNC 155 Table dimensions 460 x 800 mm Longitudinal travel (X) 560 mm Cross travel(Y) 500 mm Vertical travel (Z) 400 mm R.P.M. 40 – 4000 Rapid traverse X-Y 4000 mm/min Rapid traverse Z 3500 mm/min Quill travel 90 mm kW total power 10 kW drive power 3.3 / 4 Machine weight 2540 kg Auction-ID: A1-50718-55

Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Mistfilter not included! Auction-ID: A1-50690-9

Auction-ID: A1-50690-8

Make BURGSMÜLLER Model VIWM 800-CNC Mach. No. 2000/4533 Year of Manufacture 7/2000 Control SIEMENS SINUMERIK 840D Chuck Dia. ø 500 mm Max. Dia. ø 840 mm Spindle Bore 70 mm Max. Height over Bed 415 mm Max. Height over Cross Slide 185 mm R.P.M. Stepless 0 - 100 kW 8,5 Max. Load 700 kg Milling Spindle: kW 12 Max. Load 800 – 3,200 200-800 Taper QSP 50/2500 IK Including: Tool Changer 10 pos. Chip Conveyor Auction-ID: A1-50718-6

Machine is equipped with: - chip conveyor - tailstock - 254mm chuck Auction-ID: A1-50690-14

Machine is equipped with: - chip conveyor - tailstock - 4 jaw chuck Auction-ID: A1-50690-4

CNC – Transl. Machining Centre Inv. No. 10.653MM Make UNISIGN Model Univers 4 Control Siemens Sinumerik 810D Travel X (Longitidinal) 1,600 mm Y (Cross) 400 mm Z (Spindle Height) 400 mm Taper ISO 40 Table 700 x 400 mm Load 600 kg Distance Spindle Nose to Table 150-550 mm R.P.M. 9.000 Main spindle kW 14 Rapid Traverse X,Y,Z 5-28,000 mm/min. Feed rate X,Y,Z 28,000 mm/min. A.T.C. 44 pos. Auction-ID: A1-50718-20

Machine is equipped with: - chip conveyor - tailstock - tool setter - collet chuck - mist filter Auction-ID: A1-50690-10

CAPACITY: Swing over bed: 630 mm Swing over saddle: 500 mm Recommended turning diameter: 255 mm Max. turning diameter: 420 mm Max. turning length: 1,030 mm Bar working diameter: 76 mm TRAVELS: X-axis travel: 242 mm Z-axis travel: 1,100 mm MAIN SPINDLE: Spindle speed: 3,500 rpm Spindle nose: ASA A2#8 Spindle bearing diameter: 130/120 mm Spindle through hole diameter: 86 mm Min. spindle indexing angle (C-axis): 0.001° TURRET: No. of tool stations: 12 OD tool size: 25 mm Boring bar diameter: 40 mm Indexing time: 0.15 sec Rotary tool spindle speed: 5,000 rpm TAIL STOCK: Quill diameter: 100 mm Quill bore taper: MT#5 Quill travel: 100 mm FEEDRATE: Rapid traverse (X/Z-axis): 20/24 m/min MOTORS: Main spindle motor: 18.5/22 kW Rotary tool spindle motor: 5.5 kW Feed motor (X/Z-axis): X: 3.0 / Z: 4.0 kW Coolant pump motor: 0.4 kW POWER SOURCE: Electric power supply: 40.6 kVA  ...

Machine is equipped with: - tailstock Auction-ID: A1-50690-23

CNC HORIZONTAL MACHINING CENTER Inv. No. 12.178MM Make TOYODA Model LINEAM III Control MELDAS M650 Year 2004 TABLE Pallet size 450 x 450 mm Max. load on pallet 400 kg Table indexing increment 0.001 degrees STROKE X-Axis stroke 630 mm Y-Axis stroke 630 mm Z-Axis stroke 700 mm Distance from spindle center to top of pallet 50 – 680 mm Distance spindle nose /center rotary index table 50 – 680 mm FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20,000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2.5 sec. DRIVE MOTOR Spindle drive motor Ac 45/30 kW MACHINE WEIGHT & POWER REQUIREMENTS Machine weight 15.000 kg Power requirement 96 kVA ACCESSORIES: Spindle linear mo ...

CNC MILLING MACHINE Inv. No. 13.112J1 Make HO-CHUN Type UH-1250A Mach.no. 5123 Control HEIDENHAIN TNC 360 Table 400 x 1,800 mm Longitudinal Travel (X) 1,250 mm Cross Travel (Y) 540 mm Vertical Travel (Z) 470 mm Spindle BT 50 R.P.M. 275 – 2.000 KW 7 Volts 380 Cycles 50 Auction-ID: A1-50718-51

X-axis travel: 810mm, Y-axis travel: 610mm, Z-axis travel: 610mm, rapid traverse: 30m/min, tool holder: SK40/DIN 69871A, pull stud: DIN 69872A, tool changer: 32 tools, program memory expansion: 64MB (ATA memory card), machine color: RAL 7035/5008, mains voltage: 400V, mains connection: 3/PE~ (three-phase AC with protective earth), mains frequency: 50/60Hz, operating current (I_B): 50A, rated current (I_N): 50A, programming interface: Siemens ShopMill, max. spindle speed: 8,000rpm, screen: 10.4-inch color display, control system: Siemens 810DE PowerLine, operating hours: 37,506h, including documentation. On-site inspection is possible.

X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible.

Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.

sliding headstock CNC lathe, year 2012, 16311 operating hours, CNC 31i-MODEL B5. Used machine. More info & price on IndustrialBuyer.

turning diameter: 470 mm turning length: 2500 mm control: Siemens Sinumerik 840 D work height max.: 1300 mm swing diameter over bed slide: 750 mm swing over bed: 780 mm diameter of quill: 160 mm taper bore: MK 5 tool numbers: 48 weight of tools max.: 15 kg tool length - max.: 500 mm total power requirement: 123 kVA weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 3,3 m C-axis: - Speed range 0.1 - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis 0.1 - 18000 mm/min - Z-axis 0.1 - 30000 mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle dr ...

- Includes cabinet and electronic components. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-66

In working order. Auction-ID: A3-46137-4110

- Mobile bridge. - Total installed power approx. 40 KW. - Dimensions of the work table approx. 3650 x 1560 mm. - Z-axis travel: 250 mm. - Maximum workpiece height 150 mm. - Programmable maximum speed in x-y-z directions: 75 -75 -15 m/min. - Tool magazine with 10 positions. - Electrospindle: power 8.50 KW, automatic tool change, for HSK F63 tool holder. - Saw group for grooving in the direction of the X-axis. - Vertical holes in the x-axis direction: 9. - Vertical holes in the y-axis direction: 5. - Horizontal holes in the x-axis direction: 1 + 0. - Horizontal holes in the y-axis direction: 1 + 1. - Remote control panel. - 8 suction cups are included. - 2 x BECKER VTLF 2.250/0 vacuum pumps with a capacity of 244 m³/h each. - Cutting tools and accessories are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The cost ...

- Total installed power 31.50 KW. - Usable working area approx. 2910 x 1310 mm. - Passage height on panel 200 mm. - X-axis travel: 3100 mm, y-axis travel: 1750 mm, z-axis travel: 300 mm. - Programmable maximum speed in x-y-z directions: 25-25-15 m/min. - Tool magazine with 8 positions. - HSD ES919 electrospindle: 8KW-max power. 24000 rpm, automatic tool change, for ISO 30 tool holders. - Grooving saw group. - ISAC SAB 2001 E numerical control. - Windows software. - 6 benches. - 4 lifting modules for heavy parts. - 1 x BECKER U 4.165 SA/K vacuum pump with a capacity of 160 m³/h. - 1 x BECKER KVT 3.140 vacuum pump with a capacity of 132 m³/h. - 1 x PUSKA air tank, capacity 150 litres. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction- ...

• Serial number AA1/013786 • Working table dimensions 3050 x 1200 mm • Panel passage height 280 mm • Travelling way X-axis: 4420 mm, Y-axis: 1720 mm, Z-axis: 400 mm • Maximum travel speed in the axes direction x-y-z: 105-80-25 m/min • Tool magazine with 12 positions •  Electrospindle: power 11 kW, max, 18000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Saw unit with 2,20 kW motor • Vertical drilling spindles in X-axis direction: 5 • 2 heads for horizontal drills • NUM POWER 1040 numerical control • Software Windows / Xilog Plus • RIETSCHLE VTB 250 vacuum pump with capacity 250 m³/h • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-34

Table size 900x560mm, 24 pieces tool holder (empty), 24kVa, with air filter Auction-ID: A1-50476-1

- Includes: - 6 JOUCOMATIC pneumatic cylinders. - Approximately 34 solenoid valves. - Pressure regulator with pressure gauge and filter. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-69

Universal milling head - in working condition - can be picked up immediately and put back into work. Auction-ID: A3-46137-16561

- Includes: - 2 control pedals, transformers, resistors, relays, limit switches, power supply, valves and various accessories. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-65

Complete with tools. In working order. The machine has a brewing length of approximately 3,600 mm and a pressing force of 250 tonnes. Thanks to the CNC control, various bending programs can be precisely set and repeated. Technical data: - Brand: ERMAK - Type: CNC HAP 3600 x 250 - Year of construction: 2008 - Machine: Hydraulic CNC Bending Machine - Brewing length: approx. 3,600 mm - Press force: approx. 250 tons - CNC control - Hydraulic drive - Suitable for bending metal sheets - Including tools and accessories, as visible in the photos The machine is offered in used condition and as shown in the photos. Any dismantling, loading and transport are entirely at the expense of the buyer. Auction-ID: A3-46137-6218

Milling machine Cincinnati Milacron Sabra 750 BJ 1998

STAR SW 20 ist eine CNC-Langdrehautomat mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Kapazitäten: 11 Achsen, 2 Spindeln, max. Bearbeitungsdurchmesser 20 mm, Gegenspindel bis 10.000 t/min. Technische Daten: Spindel 3,7 kW, angetriebene Werkzeuge 1,2 kW (8.000 t/min), Schlitten 7 und 5 Positionen, Gegenbearbeitung 8 Werkzeuge (6 angetrieben), Eilgang 35 m/min, Anschluss 50 Hz 3x380 V, Gewicht ~3400 kg, Maße L2600×B1150×H1765 mm. Zubehör: Stangenlader, Lampe, Kühleinheit 150 l, Ölnebelabsaugung ELBARON, Schnittstelle Stangenlader. Erreicht enge Toleranzen; Branchen: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

X-axis: 293mm Z-axis: 1350mm Y-axis: -65° ~ +65° C-axis: 0,001° Machine us equipped with: - live tooling (5,5kW, 5000rpm) - Y-axis - tailstock - steady rest - chip conveyor - tool setter - coolant filtration system Auction-ID: A1-50690-1

FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-24

Specifications: X-axis: 400mm Y-axis: 560mm Z-axis: 400mm A-axis: +120° ~ -30° C-axis: 360° Machine is equipped with: - chip conveyor - through spindle coolant - oil cooler - 40 position ATC Auction-ID: A1-50690-18

OKUMA OSP-P300L-R control, with bar feeder TOP AUTOMAZIONI XFS370 Excludes machining media, tools and air filter above the machine AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-22

- Batch of electronic components. Includes: - 1 numerical control NUM. - 3 GEC ALSTHOM electronic drive modules. - 1 LS 12.2 kVA frequency inverter. - 1 OMRON 1.5 kW frequency inverter. - 1 bank of relays and connection terminals. - 2 SIKO encoders. - Pneumatic components, including regulators with pressure gauge, valves, cylinders, fittings and accessories. - 1 desktop computer. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-77

Manual 4th +5th axis Swivel-Tilt table Machine can work horizontally as well as vertically. Head with drill pinole Rapid walking 5 mtr/min. SK 40 hydr pull-on device Hor + Vert. ISO 40 Image DIN 69871/1 New keyboard Portable control (electronic handwheel) Auction-ID: A1-47366-146

Disassemble yourself, Forklift present 2 tons. Auction-ID: A1-47366-135