128,981 used machines on RESALE, but how to find them? Machine Search
Height=1.26 m, Overall length= 0.5 m, Overall width= 1.7 m, Net weight= 120 kg,
Height=1.69 m, Overall length= 0.81 m, Overall width= 1.57 m, Net weight= 250 kg,
Height=0.59 m, Overall length= 0.82 m, Overall width= 1.55 m, Net weight= 235 kg,
Height=1.235 m, Overall length= 1.003 m, Overall width= 0.856 m, Net weight= 90 kg,
Height=2.015 m, Overall length= 1.2 m, Overall width= 1.455 m, Net weight= 570 kg,
Height=2.13 m, Overall length= 1.1 m, Overall width= 3.65 m, Net weight= 745 kg,
Height=1.465 m, Overall length= 1.535 m, Overall width= 1.43 m, Net weight= 445 kg,
Height=1.67 m, Overall length= 0.95 m, Overall width= 1.66 m, Net weight= 240 kg,
Height=2.12 m, Overall length= 1.02 m, Overall width= 5.95 m, Net weight= 715 kg,
Height=1.29 m, Overall length= 0.52 m, Overall width= 1.82 m, Net weight= 88 kg,
Height=1.465 m, Overall length= 1.535 m, Overall width= 1.43 m, Net weight= 445 kg,
Height=0.45 m, Overall length= 0.5 m, Overall width= 0.24 m, Net weight= 26 kg,
Height=1.66 m, Overall length= 1.28 m, Overall width= 3.33 m, Net weight= 570 kg,
Height=2.5 m, Overall length= 1.25 m, Overall width= 4.2 m, Net weight= 1850 kg,
Height=1.465 m, Overall length= 1.535 m, Overall width= 1.43 m, Net weight= 445 kg,
Height=1.99 m, Overall length= 0.81 m, Overall width= 1.52 m, Net weight= 310 kg,
Height=1.36 m, Overall length= 0.64 m, Overall width= 1.5 m, Net weight= 250 kg,
Height=1.95 m, Overall length= 1.25 m, Overall width= 1.16 m, Net weight= 350 kg,
Height=1.36 m, Overall length= 0.64 m, Overall width= 1.5 m, Net weight= 250 kg,
Height=2.51 m, Overall length= 1.3 m, Overall width= 3.25 m, Net weight= 1750 kg,
Height=1.8 m, Overall length= 1 m, Overall width= 1.4 m, Net weight= 510 kg,
Height=1.5 m, Overall length= 1 m, Overall width= 1.1 m,
Height=2.2 m, Overall length= 1.15 m, Overall width= 2.05 m, Net weight= 1535 kg,
Height=2.05 m, Overall length= 1.44 m, Overall width= 1.58 m, Net weight= 595 kg,
Height=1.85 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 177 kg,
Height=0.47 m, Overall length= 0.54 m, Overall width= 1.85 m, Net weight= 160 kg,
The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.
Pipe bending machine Type: Gigalus 130 S Producer: Mewag Year: 2014 bending and shaping of 3D pipes with a diameter of min. 40mm and wall thickness min. 4mm. Based on CAD drawings, it converts the exact shaping of pipes into the final form, including the simulation of bending angles. Engine power: 40kW max.radius: 450mm bending accuracy: +/- 0.2 degree length accuracy: +/- 0.5 mm Machine in good condition, under power. Find more here - / Contact us at -
x-axis: 700 mm y-axis: 410 mm z-axis: 500 mm feed range: 30000 mm/min A-Axis: 175 mm C-axis: 320 ° workpiece dia.: 340-500 mm workpiece length: 700-1000 mm workpiece weight max.: kg max. dia. of grinding wheel: mm speed spindle max.: 8000 U/min. power capacity: 11,5 / 14,5 kW Control: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mm total power requirement: - kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3 x 2,6 x 3,55 m 5 AXIS CNC TOOL AND CUTTER GRINDER - CNC Control Siemens 840Dsl - Milling Unit – Tooling - high-pressure coolant system - Tool Changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.22 m, Overall length= 0.56 m, Overall width= 0.57 m, Net weight= 330 kg,
Height=1.22 m, Overall length= 0.56 m, Overall width= 0.57 m, Net weight= 545 kg,
Width 76 cm Year of construction 2000 Flat pile feeder with Vaculift and Vacubelt Counting device MPC 6 fold pockets in the parallel fold section Downstream knife shaft 2 folding swords in the crossfold section Noise Insulation Hood Standing sheet delivery SAP 46 L Delivery date: immediately from stock Price on request. We supply and install worldwide.
Machine is in good working condition. Parts shown by hand not come.
Key data: 630 mm, 8
A used gear pusher Lorenz S8/630 with interchangeable wheels.
Key data: 6300 mm, 11200 mm, 4800 mm
Completely retrofitted Single Column Vertical Turning Lathe Blansko model SKSJ 1A equipped with one vertical head for turning and milling operations Technical characteristics: Face plate diameter 6300 mm Max. swing with moved out arm 11200 mm Maximum height of the workpiece 4800mm Max. turning diameter with column near the faceplate 8000mm Max. diameter of work piece clamped on floor grid (for internal processing) 14700mm Infinitely variable rotation of the faceplate 0.5 – 20rpm Max. work piece weight 100ton Milling spindle max. speed : 1000rpm 2 speed gear box with 15KW Siemens motor Manual clamping ISO 60 taper tool The machine was completely retrofitted during 2024-2025 and supplied wi ...
Key data: 630 mm, 8
Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800
max. wheel diameter: 1250 mm gear width: 430 mm max. module: 30 min. module: 2 no. of teeth: 10 - 400 max.helical angle: 45 ° Stößelhublänge: 25 - 450 mm stroke position adjustment: 310 mm Doppelhubzahl - stufenlos: 70 - 190 U/min grinding wheel diam. min/max.: 290 - 400 mm table diameter: 1000 mm table load: 4000 kp dimensions of the machine ca.: 7,7 x 4,5 x 3,3 m total power requirement: 30 kW weight of the machine ca.: 28 t - Complete covering - Oil mist extraction - Coolant system - counter Holder - change Gears - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: DT083, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Theoretical capacity: 260 - 520 pcs/min., Stations: 16 pcs., Variable speed: Yes, Tablet size: Max 25 mm., Dimensions: L 950 x W 950 x H 1850 mm., Manufacturer: Manesty, Type: D3B, No: 7 D 174, Documentation: Yes
Height=0.55 m, Overall length= 0.3 m, Overall width= 0.58 m, Net weight= 39 kg,
Height=0.5 m, Overall length= 0.3 m, Overall width= 0.55 m, Net weight= 38 kg,
De-warping machine, strip descaler Maja Skinny, with new feed belt, table for open use, Connection 400V, dimensions LxWxH approx. 95x85x120cm, weight approx. 192kg, year of construction 1999, The machine is in very good condition, runs smoothly.
Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear Stages: 3 Mount: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (man./program.) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg Various tools (without cabinet)
Key data: 800 mm
Technical details are on picture. Parts shown by hand not come.
Technical data shown on picture. Parts shown by hand not come.
Key data: 50 mm, 335 mm, 280 mm
Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.
Key data: 220 kN
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on reques ...
X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
maximum number of results exceeded
please refine your search
