128,537 used machines on RESALE, but how to find them? Machine Search
SEDIN 1516 CNC Vertical Turret Lathe CNC control- Eastern origin Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 18200 kg
Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - / Contact us at -
Manufacturer: Infinite Technologies & Robotics Model: SJ2020R0C0001-MP05 Year of Manufacture: 2020 Name of Machine : G2Y Clips Mounting Machine Voltage: 380V Current: 8A Power: 4 kW Weight: 3 Tons Certification: CE marked Find more here - / Contact us at -
Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - / Contact us at -
Reference Num.: 4198 Brand: Horizon Type: Horizon Collator MC-80a + MC-80m + Stitcher & Folder SPF-11 + FC-11 Available: directly Status: Not in production Location: Deutschland Equipment: - Zusammentragturm MC-80a mit 8 Stationen - Zusammentragturm MC-80m mit 8 Stationen - Heft- & Falzeinheit SPF-11 - Trimmer FC-11
A CNC fine milling machine Iselautomation KG with defective spindle is available. Travel X/Y: 400mm/200mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1600mm, weight: approx. 500kg. On-site inspection is possible.
Manufacturer: Eckert Model: Jantar Year of Manufacture:2010 Table size: 3x6 meters 2 Hypertherm XPR 120A high-definition plasma cutting heads Pipe cutting attachment Exhaustor system One plasma source has had parts removed and requires replacement components. The machine is fully operational with one cutting head. Find more here - / Contact us at -
A 2-roller Höfer glue spreader is available. Working width: 800mm, rollers: 2. On-site inspection is possible.
Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible.
Size: 440 x 310 mm Equipments: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h
bore capacity in steel (diameter): 35 mm throat: 320 mm bore stroke: 160 mm no. of turning speeds: stufenlos Stufen spindle turning speed range: 65 - 460 / 460 - 3250 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MK 4 table surface area: 500 x 420 mm base plate: 650 x 450 mm Distance spindle/table max.: 500 mm column diameter: 120 mm distance spindle/base plate: 1100 mm Total height: 2200 mm voltage: 400 V / 50 Hz drive motor: 1,5 kW coolant pump drive: 0,2 kW total power requirement: 1,7 kW weight of the machine ca.: 0,550 t dimensions of the machine ca.: 0,6 x 0,8 x 2,2 m Industrial, gear-driven drilling machine, with coolant device, adjustable drilling depth, left-hand and right-hand rotation of the spindle, motor with 2 speeds, work light, table can be rotated and tilted, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 500 mm Hypoid adjustment: ±70 mm axial cross angle: 90 ° Distance Y-: 150 - 350 mm Distance Z-axis: 120 - 340 mm turning speed range - stepless: 0 - 5000 U/min max. torque on the spindle: 57 Nm Cone: 99,2 mm Pull-in force Tool clamping: 23000 N Braking torque max.: 93 Nm total connected load: 20 kVA total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,35 x 2,24 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T
Offer 25234 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Long spindle MK 3 - Drilling spindle speeds infinitely adjustable - Level 1 160 - 1125 rpm - Level 2 320 - 2250 rpm - Drilling spindle stroke 120 mm - Feeds 0.1 + 0.2 mm/rev - Projection 293 mm - Column diameter 115 mm - Table size 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vise - 10 pcs HSS – drill bits 10 – 25 mm - Space requirement approx. W 500 x H 1750 x D 900 mm - Weight approx. 270 kg
Offer 24190 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 140 mm - 8 drilling spindle speeds 100 - 2900 rpm - Min. / max. distance drilling spindle / table 110 / 405 mm -Lighting - Keyless chuck - Coolant device - Machine vise - Machine base - Drive 400 V / 0.75 kW - Space required: W 400 x H 1250 x D 600 mm - Weight approx. 200 kg
Double rounding tenoning machine BALESTRINI mod. TTSA - With charger - Control panel - Min/max working length 240 / 1200 mm - Maximum tenon size 100x30 mm - Hourly production: 1200 tenons (600 pieces) - Cutter rotation 9,000 rpm - Total installed power 9 kw
DMC 3-belt calibrating sander mod. USK1350 M3 - CE standard - 1 steel roller - 2 rubber rollers - 3 rubber rollers - N. 3 independent motors - Working width 1350mm - With shoes (short pieces device) - Blower on the third group - On/off device on each group - Touch screen control - Matr. SA/005006 - Year 2004 - CE compliant
900 mm sanding machine for turned products. GENINI mod. LAR90 - Maximum working length 900 mm. - Automatic loader
CNT orbital sander mod. LOR 150 - CE compliant - Matr. 17002 -Diam. Min. max. machinable 10-45 mm.ù - Hp3 engine - Year 2017
CAMAM orbital sander mod. LEC250 – CE compliant - With feeds - Matr. 11 - Year 1996 - Working dimensions min/max. 30/150 mm. - Min. radius of curvature mm. 250
Key data: 500 mm, 400 mm, 400 mm
Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!
Specifications Manufacturer Benhil Model 8311 Junior Condition Used Type of Machine Butter Packaging Machine Capacity ± 600 Kg/h Capacity (Units) up to 40 packages per minute Packaging Weight 250 gram Packaging Size 100 x 75 x 35 mm (German standard) Packaging type Bottom folding Motor power 1,5 kW Weight ± 840 kg Description Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor.
Specifications Manufacturer Benhil Model 8312 Junior Year 1977 Condition Used Serial Number 312/57 Type of Machine Butter Packaging Machine Capacity ± 750 Kg/h Capacity (Units) up to 50 packages per minute Packaging Weight 250 gram Packaging Size 100 x 75 x 35 mm (German standard) Packaging type Bottom folding Motor power 2,2 kW Dimensions 300 x 170 x 200 cm Weight ± 1.275 kg Description Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. T ...
A Trumpf CNC CO2 laser cutting system including Loadmaster is available. Laser sources: 2, laser power: 2x3200W, working range X/Y: 7000mm/2500mm, max. sheet thickness mild steel/stainless steel/aluminum: 20mm/15mm/10mm, max. traversing speed: 215m/min. Machine dimensions X/Y/Z: approx. 9000mm/4500mm/2500mm, weight: approx. 11600kg. Documentation available. On-site inspection is possible.
x-travel: 450 mm y-travel: 300 mm z-travel: 350 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A drum melter SM Klebetechnik for melting and conveying hot melt adhesives from 200 liter drums is available. Power: 20kW, max. operating temperature: 180°C, temperature accuracy: +/-1°C, temperature sensor: PT-100, pump capacity: 320kg/h, drum volume: 200l, filling heads: 2, machine dimensions X/Y/Z: approx. 1900mm/850mm/2800mm, weight: approx. 650kg, control: Siemens Simatic S7-1200, operating hours: 87h, pump hours: 15h. Documentation available. On-site inspection is possible.
Copy cutter Helma Type: CF 40 Machine No. 7825 Table dimensions 700 x 1120 mm Diameter of the 2 working spindles 30 mm Working spindle speed 10500 rpm max. milling height 100 mm Vertical adjustment of the cutter heads or milling cutters for profile correction 10 mm max. distance between the spindles from center to center 450 mm Distance between feed shafts from center to center 235 mm Spindle motors 2 x 5.5 kW Feed motor 0.37 kW Feed speeds 1.8 – 10 m/min. infinitely variable Air consumption max. 20 l/min. Net weight of the machine 900 kg
Inv. Num. : 8511 Type: J100ADS-180U 45 Producer: JSW Created: 2023 Parameters: Total number of injections: 6800 Operating hours: 60 h Panel dimensions: 630 x 630 mm Clamping force: 1000 kN Screw diameter: 45 mm Injection capacity: 223 cc Injection mass: 203 g Maximum distance between mounting plates: 910 mm Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 460 mm Maximum spray pressure: 157 MPa Opening of the mold: 360 mm Max. speed: 400 mm Machine length: 4950 mm Machine width: 1230 mm Machine height: 1670 mm Injection weight: 4600 kg Equipment: Manual Spares 1x SHINI SAL-3U-CE Suction Device 1x SHINI Vacuum Aspirator Molecular Dryer SSD120U-80H SHINI STM-607-W-CE Temperature Controller SHINI SIC-7.5A-R2 Cooling Unit Double dosing of SHINI SCM dye
Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10
BERNARDO Variomill FU 2000E Servo universal milling machine was built in 2020 in Austria by PWA Handelsgesellschaft m.b.H. The machine, distinguished by its stable design made of grey cast iron and the use of modern technologies, is the perfect choice for machining heavy, oversized workpieces. All linear axes are driven by high-performance servo motors, which guarantee appropriate accelerations and feed rates in each direction. What’s more, the X axis has been coated with a special Turcite B coating to reduce the effect of slippage. All of this, combined with extensive equipment, maximises the precision and repeatability of the produced parts, even during the most intense challenges. The Variomill FU 2000E Servo vertical milling machine weighs 4500 kg. Technical specifications of the BERNARDO Variomill FU 2000E Servo milling machine - feed in the X/Y/Z axis: 1400/700/500 mm - rapi ...
Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...
Machine in standard version for automatic sharpening of straight knives in the planing head - Planer head diameter min. 85 mm to max. 225 mm - Tool length max. 330 mm (table stroke 440 mm) - Number of cutting edges arbitrary - Free angle infinitely adjustable 15° - 35° - Grinding spindle speed n=4,000 rpm. - Grinding wheel D=125 mm, bore d=20 mm - Grinding motor 1.1 KW, n=2,850 rpm. - Feed motor 0.053 KW, n=1,300 rpm - Grinding speed 650 mm/min. - Partial motor 0.033 KW, n=1,300 rpm. - Freely selectable grinding circuits per tool 1 - 5 - Coolant pump motor 0.065 KW, n=2,900 rpm. - Coolant / tank capacity approx. 115 litres - Mandrel (NEW) D=50 x 330 mm - Machine complete with accessories Machine dimensions: H=1200 mm, W=1,150 mm + D=820 mm / Weight approx. 450 KG Condition: Refurbished by qualified personnel, everything renewed and straightened, function tested, ...
RÖSLER R320 Euro rotary vibrator YOM 2017 Outer diameter max. 1350 mm Width of processing channel 325 mm Overall length of processing channel 3050 mm Machine height - upper edge of processing bowl 1210 mm Work piece discharge heigh 1150 mm Height of media unload plug 615 mm Connected load 3 kW Weight 920 kg
Key data: 4000 mm, 1560 mm, 32
CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...
Vertical Flow Wrapper VPX250 + Servo Screw Dosing SDX Rovema VPX 250/400 flow-wrapping machine, overhauled, incl. repainting RAL 9007, Siemens S7 machine control and operation Condition: very good Hours: 150 Availability: immediately Refurbished: 2021 Vertical Flow Wrapper VPX250 Machine equipped with sealing system for heat-sealable packaging materials (e.g. paper/bonding films 60-100μ), with e.g.: - Cross sealing jaws 270 mm - Corrugation cross sealing jaws horizontal 12.0 2.0 mm / to be determined by foil sample - Longitudinal seam sealing jaw 420 mm - Temperature controls via machine operation, incl. monitoring - Sealing temperatures are set via Siemens program and stored per program - New foil cutting blade, pneumatically controlled Capacity: flat tubular bags: up to a maximum of 80/min. Log bottom bags: up to a maximum of 55/min. Depending on bag format ...
Used grinding machine Vollmer CABG 50U – built in 1995 – Very good condition For sale is a fully automatic gang saw sharpening machine from the quality manufacturer Vollmer. The machine is in very good condition, is fully functional and can be used immediately. Ideal for sawmills or woodworking companies with regular sharpening needs. Specifications: Model: Vollmer CABG 50U Year of Make: 1995 Machine Type: Automatic Gang Saw Blade Sharpener Condition: Very good, regularly serviced Saw blade width: Up to approx. 200 mm Saw blade length: Up to approx. 1650 mm Rake angle adjustment: Approx. -10° to +25° Tooth pitch: Adjustable (depending on the type of saw blade) Abrasives: CBN or diamond grinding wheels Grinding cycle: Fully automatic incl. infeed and return Control: Electronic with program selection Cooling: Integrated coolant supply Connected load: 400 V / 50 Hz ...
GeneralUniversal Milling Centre - Direct Measuring System X, Y, Z inclusive air purge for measuring system - Coolant Air-Blast Changeover external switchable via M-Function - DMG MORI NETservice - RMS device (Relocation Machine Security); Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with60 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.12000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 80 bar with chip conveyorProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed and ATC ar ...
GeneralVertical Machining Centre - Direct Measuring System X, Y, Z - Coolant air-blast changeover external switchable via M-Function; - Thermal compensation - DMG MORI NETservice; Control: DMG MORI ERGOline X Multi-Touch control Siemens CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with30 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar; - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electr ...
Shaft grinding, polishing, milling machine Specifications: - Speeds 850 to 12000 rpm - Flexible shaft approx. 2 m - Mobile undercarriage - Suitable for grinding and polishing tools - Drive 380 V / 1.0 hp - Space requirement approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg - Mobile undercarriage
Vacuum injector micro blasting machine Specifications: -Applications: - Demoulding beams, electrode production, primer preparation - Structuring rapid – tooling technology, cleaning blasting (soft blasting) - Vacuum cab with viewing window with motorized tilting hood - Tilting hood tilts motorically up to 90 ° - Blasting chamber accessible by hand, with two work gloves - Strahlpistollen - Steel turntable manually rotatable 1000 mm - Blast room interior height 500 / 840 mm - Internal blasting room width + internal blasting room depth 1100 mm - Abrasive drying system can be infinitely adjusted electronically - Microfilter dedusting system – IMF type unit - 2 - Compressed air connection up to 10 bar - Drive 400 V / 2.9 kW - Space requirement approx. W 1400 x H 2300 x D 3100 mm - Weight approx. 900 kg - Separate work platform with st ...
3M-Matic 800a-E Type 29600 (5799) Carton sealing machine for lid and bottom closure with adhesive tape, side belt belt drive system, carton format range in mm length 150 - ~, width 115 – 550, height 120 – 625, manual carton size adjustment, maximum carton weight approx. 38 kg, roll discharge with a length of approx. 1200 mm, drive laterally, electrical connection 380V/50Hz/3PH/1.4A, 260W, machine in mobile version on rollers, output up to 40 cartons per minute
Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120
Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table
Clamping force 1800 kN. Extruder S 120/28D. Accuhead 25 ltr with 100-point programming. Die dia min/max 150/450 mm
Vemag vacuum filler -Type: DP10E -Power: 12 kW -Filling speed: 6000 kg/h -Portion size: 5-60 000 g -Hopper capacity: 250 L -External dimensions: 2200 x 1500 x 1950 mm -Power supply: 400V 50Hz -Year of production: 2014 -Weight: 1300 kg -Condition: Used in very good condition, ready to work
Manufacturer: LOESER Model : RPS374/8 Year of Manufacture: 2007 (The system went into operation in 2008) Voltage: 400 V Frequency: 50 Hz Current: 200 A Overall dimensions are around 8 m × 2.2 m Cylindrical grinding machine with 1–10 stations for processing cylindrical materials made of steel and other metallic or non-metallic materials. Technical Data: - Diameter Range: 3 – 150 mm - Contact Wheels: Dimensions 400 x 150 mm - Part Feed Rate: approx. 0 – 30 m/min (depending on the workpiece transport system) - Feed Wheels: - Manually adjustable based on the workpiece diameter - Pneumatic pressure application Abrasive Belts: - Dimensions: - Standard: 2500 x 150 mm - Optional: 3500 x 150 mm - Belt Tension: Pneumatic - Belt Drive Power: - 5.5 kW (optional: 7.5 kW or 11 kW) The machine is prepared for wet grinding Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
