edge banding machine used for sale

Presse à injecter DEMAG ERGOTECH 330 T en bon état? Référence : Ergotech E330-1450-NC4S? Année: 1998? 65 000 heures de fonctionnement ? Diamètre vis : 70 mm? Rapport L/D : 20? Volume injectable : 1039 cm3? Poids injectable en PS : 940 gr? Pression d'injection : 1400 bars? Course de dosage maxi : 270 mm?P uissance de chauffe : 27 KW? Dimensions des plateaux : 1040 x 950 mm? Distance entre colonnes : 710 x 630 mm? Epaisseur moule : 330 - 710 mm? Course d'ouverture maxi : 675 mm + Robot SEPRO type 3031 YN MPA II? axe X : 2500 mm? axe Y : 800 mm? axe Z : 1400 mm Dimensions de la machine : 6,50 x 2,00 x 2,30 m? Poids de la machine : 14 300 kg

Bekum BA 52 Blow Moulding Machine Stations: Single Clamping Force: 450 kN Control: Original Bekum Extruder: S 701 Head: 6 Litre Accumulator-Head new Max. Bottle volume: 60 Litres Mold Dimensions (Length/Width/Depth):1200/750/2150-300 (mm)

Souffleuse - machine d'extrusion soufflage BEKUM BA 200 Tête D'accumulation de 8 l 1 tete et 1 station Matériau transformé: PE Capacité de production: 500 kg / h Type d'extrudeuse: Accumulator Rsbpmev Hpnre If Hisu Nombre d'extrudeuse : 1 Diamètre de la vis : 120 mm Rapport L/D: 24 Contrôle de l' épaisseur: oui alimentation matière Course d'ouverture : 710 mm Force de serrage : 800 KN

Manufacturer: Cefla Model: GlassCoater F13 EVO Year of Manufacture: 2011 Electrical Specifications: - Voltage: 400 V - Frequency: 50 Hz - Total Installed Power: 2.1 kW CE Certified: Yes Find more here - / Contact us at -

Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - / Contact us at -

Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot Find more here - / Contact us at -

A winding machine SAHM for the textile industry is available. Heads: 182, core: 90mm, stroke: 400mm. Conversion to 200/250 is possible. On-site inspection is possible.

A Junker CNC cylindrical grinding machine overhauled in 2019 is available. Grinding length: 150mm, center height: 100mm, max. workpiece weight: 5kg, max. grinding diameter: 500mm, orbital diameter: 80mm, grinding wheel diameter: 400mm. Machine dimensions X/Y/Z: approx. 2850mm/1450mm/2000mm, weight: approx. 2000kg, control: Siemens Sinumerik. Including BKW chiller, Knoll VL 1000/4000 cooling lubricant system with 6500l container and Hyfra industrial recooler. Documentation available. On-site inspection is possible.

A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.

workpiece diameter: 350 mm workpiece weight: 99999999 kg workpiece height: 240 mm total power requirement: 7,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespa ...

Format 115 X Program Colour monitor Air table Side table on the right Polar Mohr LW 1000 Stapellift left Spare blade approx. 828 T Sections

OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...

Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table

Logopak 410 IIIF Labeller Serial: LP10021552 Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,

Clamping force: 1250 kN Ø worm: 35 mm Column spacing: 470 mm Injection weight: 142g Min. mould height: 300 mm Total weight: approx. 6,000kg

Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible.

Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / Year of construction 1972 Groove comb with two thicknesses Perforating comb Functioning Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / year of construction 1972 Grooving tool with two thicknesses Perforating tool Working condition

Ref. 499 Stitching machine Agrafix BX Ma No. 17007 Condition: Used machine / Cleaned and checked / Functional Ref. 499 Stitching machine Agrafix BX Serial 17007 Condition: Used machine / Cleaned and checked / Good working condition

Number of spindles: 5 St. Working width: 250 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ------------------------------- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ------------------------------- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm Th ...

various wire spools for calendars/exercise books for production. Different Wire-O coils 2:1 (different colors, different plastic rollers for spiralization). Calendar brackets, shafts

1 used ELB SURFACE GRINDER Model: SWBE 010 NPC-K Grinding area: 1000 X 550 X 400 mm Year of Make: 1988 Grinding wheel:  400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Electro-Permian Magnetic Clamping Plate 1000 X 400 mm (SAV) Magnetic adhesive force control Universal Paper Belt Filter Grinding wheel with holder

Inv. Num. : 7215 Type: ENSIS 3015 AJ Producer: AMADA Created: 2021 Parameters: Laser ON: 9348 h Beam ON: 7276 h Laser power: 6 kW Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg

Tränklein banding machine ZW-D 500, with cardboard device, machine number 2967, year of construction 1986, machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Iobr Sbsvvirij Ta Ejau You are welcome to visit the machine in our house by prior appointment.

turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-jaw chuck tool holder device tail stock Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tränklein double corner round machine, machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Isbovvi Epjr Sb Ta Esau You are welcome to visit the machine in our house by prior appointment.

A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible.

Hanging machine Schmedt PräLeg HHS18, year of construction 1996, machine number 490, in good condition, immediately available Iobr Sevt Sadob Ta Eeau If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Gewinde-Ø: 52 mm threading length: 500 mm thread pitch: entsprechend Hohlspindel -Ø: 54 mm spindle turning speed range: 25 - 140 U/min turning speeds:: 6 Stufen voltage: 380 V / 50 Hz main drive motor: 3 kW total power requirement: 4,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reiser GK512B Vacuum chamber packaging line 2017, Stainless vaccum chamber packaging line, consisting of Supervac GK Vacuum chamber, Supervac AT hot water shrink tank and Supervac BL15 Drying tunnel, also comes with Supervac BG450 bag opener, 3Ph

bore capacity in steel (diameter): 40 mm arm length: 1000 mm workpiece height max.: - mm total power requirement: 5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,4 x 1,2 x 3 m Vertical movement not functional No. 4656 Radial drilling machine MK 4 make OOYA, type RE 2 - 1300 A Year of manufacture 1978 Working area: MK 4 x 1000 x 660 mm Spindle holder MK 4 Speed range 32 - 1655 min-1 ( 50 Hz ) Space requirement approx. 1.2 x 2.4 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic blister machine with brush feeder for tablets, capsules, etc. The unit can process PVC/ALU blisters, incl: - Various format sets, Brushing sets, Chiller KKT, various spare parts. PLC: B&R. Output: max. 350 blisters/min.

1.0 pcs IML Brewing System with Removal Unit, Stacking Unit and with IML Vision Inspection System for 4-Compartment Cavities Tool Manufacturer: Beck Automation AG Type: B4 Year of Make: 2019

Key data: 4 , 180 mm, 105 mm

Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning

max. wheel diameter: 5500 mm gear width: 1500 mm max. module: 32 faceplate diameter: 3740 mm swing diameter: 6200 mm turning height: 1200 mm control: FANUC 31i MODEL B : 1250 mm cross rail - adjustment: 3000 mm turning speeds: 3-15 U/min spindle turning speed - stepless: 15 - 1500 U/min workpiece weight: 39,4 t max. dia. of teeth cutting: 5500 mm tooth width: 550 mm module: 32 cutter speeds: 10 -150 U/min milling cutter dia. x width: 450 x 110 mm milling head axial adjustable: 2060 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Complex TurnMill & Gear Cutting Machine - CNC control FANUC 31i B - Turning and Milling Function - ATC - Angular Milling Head - Gear Hobbing (internal and external) - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used dough weigher W&P, type: Parta U -completely overhauled- - W&P Parta U1 with 1 cylinder for dividing - Capacity: max. 1,500 pcs./h - Weight range: 300 - 2,800 g - Machine completely disassembled, all wear parts renewed - Condition: Very good, like new - 6 months warranty Visits and test runs are possible by arrangement.

1.0 pcs IML Brothers - System with Removal Unit, Placement on Conveyor Belt for horizontal stacking injection mould 32 - cavities Manufacturer: Beck Automation AG Type: B32 Year of Make: 2019

equipped with Iemca Boss 338HD/32 barfeed new in 2017 - fixed and rotating bushing - evacuation of long pieces through the sub spindle + external apparatus - chip conveyor - some colllets+guide bushings - Fanuc 32i-B Control.

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

A semi-automatic Italian Pack traysealer machine is available. Packaging output with VAC/GAS: 4-5 cycles/min, packaging output with SKIN: 3 cycles/min, vacuum pump output: 63m³/h, max. packaging depth: 120mm, film diameter range: 250mm-340mm, max. film width: 370mm, machine dimensions X/Y/Z: approx. 1100mm/1100mm/1400mm. Including automatic film rewinder. Documentation available. On-site inspection is possible.

HF welding machine with sliding table - 1.1 KW

tube diameter: ? mm wall strength: ? mm bending radius min.: ? mm roll diameter: div. ca. 100 - 240 mm roll diameter - bore: 60 mm Shipping weight: 950 kg Packing: 1,20,80,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HF Welding Machine with Sliding Table

Leather splitting machine Camoga Cn 412 with 40cm working width

Filling and Depositing machine MINI-FILL 100 - demo-machine, brand-new condition, year of manufacture: 2025 - all-in hopper with built-in impeller system, machine housing made from food-approved plastic, multi-colour-touch screen control panel with adjustment of impeller speed, dosing volume and reverse function, machine suitable for single dosing, automatic dosing with pre-set counter or continous dosing with hand gun, 8 liter-hopper made from food-approved plastic with lid double outlet D = 11,1 mm and 6-teeth gear for semi-liquid, soft and airy products, two pieces injection needle D = 6,52, L = 50 mm, electrical supply: 230V/50Hz/1~, power supply: 100 W

Stock number: 3984 GEAR MILLING MACHINE Manufacturer: STAEHELY, Type: SHA 506 Machines NO.: 10442, Year of manufacture: 0 Specifications: Module 6 Table size 300 mm Ø Spindle speeds 100-500 rpm Accessories: Zuadds gear Operating instructions Length: 2200 mm, Height: 2000 mm, Width: 1300 mm, Weight: 4860 kg

OKOMA UF 2 S-1 automatic rebate machine with: 2 spindle right and 1 spindle left - Spindle 1 - Equal and counter-rotation 320 mm - Spindle 2 - counter-rotation 320 mm - Spindle 3 -Gegenlaut 320 mm Automatic left stop with programming

Machine for punching and sharpening belts at the same time

used baking tray cleaning machine wet cleaning Reini R 580 WE, 1.1 kW drive power, 24 kW heating, pump capacity 70 m³/h

Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T