edge banding machine used for sale

flat pile feeder 2 folding units - 4 buckle plates: T500-2-500/4 Mobile knife: T500-3-X Also with easy delivery Noise absorbing hoods Stream delivery A 56

01 sets Picanol Air-Jet TERRY Weaving Loom, type OmniPlus SUMMUM- 340 YOC 2015, working width 340 cm, 6 weft colors Stäubli DOBBY STAUBLI – electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

Weight 1300kg Size L 1.66xW1.24xH1.66m Power connection 380V power consumption sheets per hour 5000 Sheet format (max) 260 x 380 Sheet format (min) 40 x 70

Functional machine with tear strip device; but needs to be prepared. Film width 50 - 280 mm Product dimensions min. 40 x 20 x 7 mm Product dimensions max. 215 x 165 x 80 mm Max. production 75 packs/min. Length x width x height: 1310 x 900 x 1600 mm (plus VAT) infeed belt) Weight approx. 600 kg Location: Cologne

Tape: PVC or PP; width max. 50 mm; core 76mm; 40-55 mm overlap. Transport speed: 20 m/min. Operating temperature: 5 to 45 °C. Connection: 230 V/1~N/50 Hz, 0.6kW Degree of protection: IP54. Watts: 240 watts

Frey OSCAR 20 Piston Filler used Machine is equipped with two rollers that allow manoeuvring with the toggle lever folded out It comes from an insolvent company, the piston with gasket, union nut, piston wrench and piston screw could not be found during the dissolution and were therefore reordered, see pictures. The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in the same condition as it was returned by the customer, so it must be thoroughly cleaned before use Video about test run available

- Maximum paper size: A3 (up to SRA3 format) - Functionality: Multifunction finishing for creasing and cutting - Applications: Ideal for business cards, brochures, and other printed materials - Efficiency: Precise cutting and creasing for quick and accurate workflow

Control Cabinet for Tetra Pak Conveyor Systems Industrial control cabinet designed for operating and controlling Tetra Pak conveyor systems in beverage and packaging lines. The cabinet is equipped with reliable automation components, ensuring stable and efficient conveyor operation. General Information - Application: Control system for Tetra Pak conveyor lines - Condition: Used Installed Components Control System - PLC: Siemens PLC Electrical Components - Circuit Breakers: Schneider Electric Drives - Frequency Drives: 4 × Danfoss frequency drives Sensors - Detection Switches: 8 × SICK detection switches Key Advantages - Designed for Tetra Pak conveyor system control - Equipped with Siemens PLC automation - Reliable Schneider Electric electrical protection components - Includes Danfoss frequency drives for motor speed control - SICK detection switches  ...

- Maximum paper size: 674 mm x 365 mm - Minimum paper size: 140 mm x 148 mm - Maximum paper weight: 240 g/m² (depending on material) - Minimum paper weight: 60 g/m² - Speed: Up to 27,000 A4 sheets per hour (depending on material and fold type) - Load capacity: Up to 500 sheets - Electrical requirements: 240V, 50/60 Hz - Dimensions: 1240 mm x 555 mm x 1360 mm - Weight: 118 kg

- Max. paper size: 470 x 650 mm - Min. paper size: 120 x 135 mm - Max. paper weight: 250 g/m² - Min. paper weight: 40 g/m² - Working width: Up to 50 cm - Vacuum suction feed - Flat pile feeder - Noise protection cover - Digital control panel with programs - Two folding pockets - Sheet counter - Optional additional equipment: Creasing and perforation wheels - Speed: Up to 40,000 sheets per hour - Power supply: 380 V, 50/60 Hz

bore capacity in steel (diameter): 50 mm throat: 385 mm bore stroke: 240 mm table surface area: ø 500 mm spindle taper MT: 5 spindle turning speed range: 40 - 800 U/min feeds: 0,1/0,14/0,2/0,28/0,4 mm/U column diameter: 220 mm distance between table/spindle: max. 670 mm distance spindle/base plate: 1180 mm total power requirement: 4 kW weight of the machine ca.: 1,4 t dimensions of machine L x W x H: 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1700 mm y-travel: 800 mm z-travel: 890 mm table surface area: 2000 x 630 mm spindle taper: SK 50 spindle turning speed range: 35 - 3000 U/min spindle drive: 26 kW feeds longditudinal/cross/vertical: 6 - 5000 mm/min rapid traverse: 15 m/min table load: max. 6000 kg control: HEIDENHAIN control: TNC 360 total power requirement: 45 kVA weight of the machine ca.: 13 t dimensions of machine L x W x H: 5,2 x 2,78 x 2,95 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Helix Accumulator – for Tetra Pak Packages, Glass and PET Bottles Reliable Helix accumulator system designed to buffer and accumulate containers in high-speed beverage and packaging lines. The unit is suitable for handling Tetra Pak packages, glass bottles, and PET bottles, ensuring smooth product flow and reducing line stoppages. General Information - Machine Type: Helix Accumulator - Application: Accumulation and buffering of containers in production lines - Condition: Used Technical Specifications - Accumulation Length: 131 m - Accumulation Length Without Extension: 85 m - Maximum Package / Bottle Height: 171 mm Equipment Features - Includes: Rubber tops for gentle product handling - Designed for Tetra Pak packages, glass bottles, and PET bottles Key Advantages - Efficient container accumulation and buffering - Suitable for Tetra Pak cartons, PET bottle ...

turning diameter: 500 mm turning length: 1500 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,3 t dimensions of machine L x W x H: 3,45 x 1,65 x 1,93 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm spindle taper: SK 40 control: HEIDENHAIN TNC 310 spindle turning speed range: 10 - 3150 U/min spindle drive: 5,5 kW feed - longitudinal/cross: 1 - 5000 mm/min feeds vertical: 0,5 - 2500 mm/min rapid traverse: 6 / 6 / 3 m/min total power requirement: 10 kVA weight of the machine ca.: 2,5 t dimensions of machine L x W x H: 2,16 x 1,70 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 300 mm workpiece height: 230 mm table surface area: 1000 x 240 mm x-travel: 1000 mm y-travel: 270 mm z-travel: 350 mm grinding wheel diameter: 240 mm grinding spindle speed: 2180 U/min table speed -stepless-: 3 - 30 m/min total power requirement: 4,5 kW weight of the machine ca.: 2,8 t dimensions of machine L x W x H: 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 940 mm z-travel: 1000 mm table surface area: 3250 x 800 mm spindle taper: SK 50 spindle turning speed range: 40 - 1800 U/min feeds longditudinal/cross/vertical: 0 - 2250 mm/min rapid traverse: 6 m/min table load: 4500 kg control: HEIDENHAIN, TNC 355 total power requirement: kW weight of the machine ca.: 10,3 t dimensions of machine L x W x H: 4,50 x 2,69 x 2,71 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 250 mm workpiece height: ca. 385 mm table surface area: 600 x 200 mm table speed -stepless-: 2 - 35 m/min table load capacity: max. 250 kg grinding wheel size: ø 225 x 25 mm grinding wheel hole diameter: 50,8 mm vertical feed autom.: 0,001 - 0,099 mm rapid traverse vertical: 600 mm/min cross feed of table continual: 10 - 1000 mm/min rapid traverse cross: 1000 mm/min total power requirement: 6 kVA dimensions of machine L x W x H: 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1100 mm workpiece height max.: ca. 1000 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 28 - 2500 U/min feeds: 0,05 - 2 mm/U quill stroke: 300 mm distance basic plate - spindle nose: 630 - 1380 mm crossrail adjustment vertical: 750 mm total power requirement: 6 kW weight of the machine ca.: 4 t dimensions of machine L x W x H: 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Accessories: box table 550 x 550 x 550 mm, vice, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm table surface area: 1250 x 700 mm spindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/min quill stroke: 100 mm semi-automatic operated: Phillips 432 Number of working hours: 62.340 h main drive motor: 22 kW total power requirement: 27 KVA weight of the machine ca.: 7,7 t base area: 3,8 x 4,1 x 2,4 mm accessories:: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

Bohrleistung in Stahl (-Ø: 35 mm throat: 1000 mm workpiece height max.: 200 - 1400 mm height adjustment: 745 mm base plate surface area: 1200 x 930 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 4 bore spindle stroke: 350 mm turning speed range: 60 - 1850 U/min feed range: 0,09 - 1 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,7 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m Cube table 800 x 800 x 650 mm Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: 7 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m Year of construction approx. 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. Pitch circle diameter External gearing: 300 mm Max. Pitch circle diameter internal gearing: 300 mm Max. Outer diameter of workpiece (equipment): 450 mm max. module: 6 gear hobbing width -max.: 100 mm Max. Helix angle (with tool Ø 125 mm): +/- 45 ° strokes - infinitely variable: 130 - 1300 Hub/min workpiece weight: 1000 kg Minimum distance table top - tool spindle: -55 / +300 mm Maximum distance table top - tool spindle: 200 mm Maximum distance table top - tool spindle: 350 mm Manual Upright side shift: +/- 25 mm Manual swivelling angle of the tool spindle: +/- 0,5 ° Max. Tool speed: 15 UpM Max. Workpiece speed: 27 UpM Max. Tool diameter: 7 Zoll voltage: 400 V frequency: 50 Hz Max. Line power: 70 A total power requirement: 48 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4,27 x 3,11 x 2,87 m control: Siemens Sinumerik 840 C table hole: 40 mm taper in main spind ...

max. wheel diameter: 180 mm gear width: 45 mm max. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mm spindle taper: innen MK 4 table diameter: 160 mm table bore diameter: 75 mm no. of strokes: 355 - 630 Hub/min feed range: 0,008 - 0,4 mm/Hub dimensions of the machine ca.: 2,30 x 1,50 x 2,36 m power capacity: 6 kW weight of the machine ca.: 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 10 min. module: 1 workpiece dia. over saddle: 250 mm spindle bore of workspindle: 102 mm quill stroke: 100 mm workpiece turning speeds: 0,0032 - 2,6 U/min feeds - rolls: 0,027 - 5,66 mm/WU feeds - longitudinal: 0,3 - 198 mm/min main drive: 4 kW swivel angle for work spindle: 90/120 ° diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min total power requirement: 9,5 kW weight of the machine ca.: 4,2 t Machine equiped with: - Heavy Duty Hob Head ApFw - change gears - Milling Head ApFF - Single Indexing Device ETE - Bush Rest - Coolant Tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 300 mm workpiece height: 350 mm total power requirement: ? kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,522 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 730 mm control: FANUC 21i rapid traverse: 15/24 mm/min spindle turning speed range: 4000 U/min spindle motor: 19 kW x-axis: 240 mm z-axis: 640 mm rapid travel (x and z-axis): 18 /24 m/min spindle bore: 66 mm tailstock quill taper MT: 5 tailstock quill stroke: 120 mm total power requirement: 50 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3 x 1,7 x 1,8 m - CNC control FANUC 21i-TB (with Manual Guide I) - hydraulic hollow clamping cylinder - 12-position tool turret, driven tools 4000 rpm, 2.8 kW - Tool monitoring - SMW Autoblok KNCS N225-65 chuck - C-axis (with disk brake for milling operation, Transmit software for end face machining and cylinder interpolation for shell machining) - B-axis - Tailstock (MK 5) - Chip conveyor - Coolant system with high-pressure pump - Parts catcher - Radial and axial milling heads Translated wi ...

Bore diameter: variabel mm Number of heads horizontal: 1 St. Number of heads vertical: 0 St. 1 Götzinger dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10 touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ---------------------- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ---------------------- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ---------------------- 1 press-in station with dowel separation and press-in cylinder item 4 ---------------------- 1 oscillating conveyor for dowels d 8 x 50 mm with feed hose into the  ...

turning diameter: 120 mm turning length: 380 mm control: Fanuc 18 iTB max. swing diameter: 300 mm : : 8000 min/-1 : 7,5 kW : 26 Nm spindle nose: 100 mm spindle passage: 32 mm A-Axis: : 8000 min/-1 : 5,5 kW : 23 Nm spindle nose: 100 mm spindle passage: 32 mm : : 12 pos. tool taper: VDI 16 Sub Spindle: x-axis: 400 mm z-axis: 400 mm feeds:: rapid traverse: 12 m/min total power requirement: 20 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 2 x 1,7 m 2022 New glass scale Heidenhain and replacement of smaller parts, new FANUC CNC Keyboard CNC - Ultra precision turning centre (X-, Z-, E-, C-Axe) - CNC control Fanuc 18iTB - Main and counter spindle - SAUTER tool turret 16-fold (0.5.480.510) VDI 16 - Linear tool slide - automatic doors - Chip tray - Coolant system with fine filter (high Pressure Pump) - 3 jaw chucks - Various clamping devices/pressure collets - Vari ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 180 mm Control: Fanuc 180-T grinding wheel width: 80 (100) mm grinding wheel diameter: 450 mm power capacity - grinding motor: 7,5 kW table speed -stepless-: 10 m/min grinding spindle head - swivable: +5 / -180 ° turning speed range - workpiece spindle: 10 - 800 U/min grinding head swivelling: 0 - 15 ° workpiece weight max.: 120 kg taper in tailstock-quill: MK 4 tailstock quill stroke: 35 mm dressing device: voltage: 400 V total power requirement: 18 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,75 x 2,25 x 1,80 m band filter unit: 1,75 x 1,20 x 0,80 m - Serial No.6769 - Universal Cylindrical Grinding Machine with internal grinding spindle - CNC-controlled B-Axis for automatic. swivel of spindle head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 255 mm centre distance: 1080 mm turning diameter over bed: 500 mm turning diameter over slide: 290 mm turning length: 1000 mm spindle taper: KK 8 DIN 55027 control: Sinumerik 810 D SIEMENS bed width: 360 mm spindle bore: 70 mm turning speed range: 2 - 2800 U/min rapid travel - longitudinal/face: 10 / 5 m/min quick change toolholder: MULTIFIX Typ B / CAPTO drive capacity - spindle motor: 11,0 kW taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 160 mm coolant: voltage: 400 V total power requirement: 16,0 kVA weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,85 x 1,60 x 1,80 m chip conveyor: 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 6,0 t max. ram stroke: 1250 mm max. workpiece diameter: mm dimensions of the machine ca.: 1,20 x 1,20 x 3,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 8400 mm grinding width: 1450 mm workpiece height: 1250 mm surface area: 8000 x 1250 mm table height over floor: 920 mm distance between columns: 1470 mm workpiece weight max.: 59700 kg weight of the machine ca.: 59,7 t dimensions of the machine ca.: 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW The data for this ad was created with ModulMWS - the  ...

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1500 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min power capacity - table: 100 kW Torque: 31784 Nm 0: 218 kw weight of the machine ca.: 55 t Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coola ...

x-travel: 1600 mm y-travel: 920 mm z-travel: 900 mm table surface area: 1800x700 mm T-slot - distance: 120 mm Table load: 3000 kg spindle taper ISO: 50 power capacity: 22/30 kW spindle turning speed range: 60-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/min Table area: 2300x1200 mm Spindle: 200 mm spindle stroke: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Nr 3762 Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: max. 320 mm grinding length: 1.500 mm centre height: 160 mm Control: Touch Jones & Shipman between centers: max. 100 kg table:: Traverse Z-Axis: 1.645 mm traversing speed: 0,0001 - 12 m/min swivable: +5 / -5 ° x-axis:: Traverse X-Axis: 260 mm traversing speed: 0,0001 - 6 m/min grinding head:: grinding wheel motor: 7,5 kW cutting speed: 45 m/s Grinding wheel Ø x width x bore: 450 x 50 x 203,2 mm Tailstock:: Swivel range: -15 / +90 ° turning speed range: 0 - 660 U/min Torque: 27 Nm tool adaptor: MK 3 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 5,5 x 2,5 x 2,0 m paper band filter: magnetic separator for cooling water: Coolantsystem: Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) -  ...

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - in ...

: 0600 mm : 300 mm : 342 mm : 700x340 mm : 355x38x127 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm : 480 mm : 550 mm : 1524x380 mm : SK 40 : 127 mm : 105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 70 mm throat: 420 mm bore stroke: 260 mm thread capacity: 50 M spindle taper MT: 5 MK column diameter: 220 mm bore spindle turning speed range: 51-966 U/min table-size: 600x600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm : 1500 mm : : 230 mm : 78 mm : 400 mm : 2200 U/min : D1-8 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0800 mm : 400 mm : 342 mm : 900x460 mm : 355x38x127 mm : 2400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 100-2000 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 132-1852 U/min table-size: 420x400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm : 1250 mm : : 200 mm : 55 mm : 315 mm : 2700 U/min : D1-6 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 160 mm thread capacity: 30 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 75-2100 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 1275 mm : 1330 - : MK 5 bore depth: 270 mm spindle turning speed range: 44-1206 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.