edge banding machine used for sale

Edge banding machine Type: KDF 660 Manufacturer: Brandt Year: 2014 Touch screen, servo motor adjustment Automatic lubrication of the feed belt 2x Dia preload height 60 mm Glue application with aggregate + tank, second aggregate possibility of gluing Eva/Pur, third aggregate Airtec hot air edging Cutting with saws Milling aggregate for plane and with R1 Split milling R2 and corners Grooving aggregate (half groove, groove, also for impact handles) 4x radius filter R1/R2 flat filter brushing brushes sprayers +Accessories Machine in good condition, under power Find more here - / Contact us at -

A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible.

Edge banding machine Sumbel Perkeo 60; cleaned and tested; Working width 60mm; 1 roller; Speed adjustable; suitable for cold glue. Edge gluing machine Sumbel Perkeo 60; cleaned and checked; working width 60mm; one roller; adjustable in speed; Used for cold glue.

Edge banding machine Type: Tempora F 600 Manufacturer: Format-4 Year: 2021 Glued meters: 9000 In very good condition, under power Find more here - / Contact us at -

Edge banding machine Type: KAL370 Ambition 2274 Manufacturer: Homag Year: 2016 The machine also has airTec for laser edge banding and pur glue edge banding. Machine in good condition, under power Find more here - / Contact us at -

The Flexa 607 automatic edge banding machine is an extremely versatile machine with a high performance that puts it at the top of its category. Productivity: The high machining speed of up to 22 m/min ensures high productivity in all working conditions. The XE version with controlled axes enables extremely fast and precise machine setup. Flexibility: The optional equipment of the machine with a belt press allows the processing of any type of material. FLEXA 607 / 607 XE Panel height 10 (13) ÷ 60

Joining unit with 2 joining motors of 1.5 kw each 12000 rpm Roll stock scissors of 0.8-2 mm Glue tray with glue roller for 3 kg  Spare tray for 3 kg (colour change) 3 rollers of printing unit Feed speed 13 m/min Preheating lamp  Rounding milling at the top and bottom  Corner copy rear front Edge Scraper  Spray agent before buffing Buffing unit - Rolls 0.4-2 mm - Panel thickness 15-50 mm - Min. plate 70 x 200 mm - Plc control touch screen - Roller bearings up to D 550 mm - Operating pressure 6 bar - Ce version  - Machine dimensions 390 x 70 x 150 cm

Panel thickness 8 (13) ÷ 60 mm Rolls 0.4 ÷ 3 mm Strip edge thickness 0.4 ÷ 8 mm (12 mm optional) Feed speed 10 ÷ 18 m/min The FLEXA 507 automatic edge banding machine offers optimal solutions for all edge banding requirements. The flexible configuration options, the option to equip the machine with controlled axes in the XE version and the high feed speed make the Flexa 507 an extremely versatile modern machine. The extremely robust design and precise assemblies ensure the highest precision and

Joining unit with slide cutter  Non-stick Spray Unit Automatic stripping and roll loading station Glue application with roller  Alternating basin for Pu glue (tot 2 basins)  Cross-cut and corner saw unit Eboning unit at the top bottom with nesting units Wing Scraper  Edge scraper blade with nesting unit  Buffing unit Machine length 315 cm  Sheet material from 8 to 50 mm on roll edge material from 0.4 to 3 mm Strip material from 0.5 to 5 mm

Details & Accessories:  ? Model: Holz-Her 1401  ? Suitable for plastic and solid wood edges  ? Machine stands on castors and is easy to move  ? Flush milling cutters and rounders included  ? Dimensions: approx. 2.6 m long, 90 cm wide, 1.25 m high  ? Robust construction, clean gluing

Inv. Num. : 8874 Type: TRIATHLON 1487 V Producer: HOLZHER Created: 2003 Parameters: Binding height: 55 mm Machine dimensions: 7500 x 1300 x 1800 mm

Edge banding machine Type: 1308 XL Manufacturer: Holz-Her Year: 2014 Machine in good condition, under power Find more here - / Contact us at -

Edge banding machine Type: Optimat KDF 230 AT Manufacturer: Homag Year: 2017 Machine in good condition, under power Find more here - / Contact us at -

Tünkers KBA 120 edge banding machine; cleaned and tested; Working width 120mm; suitable for cold glue. Edge gluing machine Tünkers KBA 120; cleaned and checked; working width 120mm; used for cold glue.

Edge banding machine Sumbel Perkeo 150; Working width 150mm; suitable for cold glue. Edge gluing machine Sumbel Perkeo 150; workind width 150mm; used for cold glue.

Edge banding machine Sumbel Perkeo 90; cleaned and tested; Working width 90mm; suitable for cold glue. Edge gluing machine Sumbel Perkeo 90; cleaned and checked; working width 90mm; used for cold glue.

A high-performance Homag Edgebanding Line paired with a Ligmatech Automatic Return System. This combination allows for a "one-man operation," where the machine applies the edges and then automatically sends the panels back to the operator for the next pass. Below is a professional draft for an online listing. --------------------------------------------------------------- For Sale: 2007 Homag Optimat Edgebanding Cell Featuring: Homag KAL 310 Edgebander & Ligmatech ZHR 05 Return System This is a complete, industrial-grade edgebanding solution manufactured in Germany. The set consists of a high-speed Homag KAL 310 single-sided edgebander and a Ligmatech ZHR 05 Boomerang return conveyor. This setup is designed for high-volume production, significantly reducing labor costs by allowing a single operator to manage the entire infeed and outfeed process. Machine 1: Homag Optimat KAL 310/10/ ...

Edge banding machine Type: KDF 220 Manufacturer: Brandt Year: 2012 Pre-milling machine Radius Rondomat Radius cidliny Scrapers Machine in good condition, under power Find more here - / Contact us at -

Edge banding machine Type: Sprint 1317 Manufacturer: Holz-Her Year: 2006 Edge Control with 18.5" 16:9 color touch screen rotary control panel, memory for programs, motorized adjustment of the pressure beam, feed using a transport chain, feed 8–18 m/min extendable support surface for workpieces Trimming milling unit 1961, diamond cutting cutter in right- and left-hand operation, automatic adjustment to the height of the workpiece Edge feeding 1903 Pre-cutting up to 3 x 45 mm (depending on the material) Adhesive system 1905 Multi-System automatic adjustment of the glue height using the touch nozzle, Pressure regulator for adjusting cartridge pressure, the possibility of using PUR adhesives, pressure device 1913 MOT, 1. cylinder driven Trimming unit 1918 with pneumatic adjustment Pneumatic cut-off saw rotating Multifunctional unit 1824 MOT 4 with a multifunctional ...

Edge banding machine Type: O KDF 210 Manufacturer: Brandt Year: 2010 Machine in good condition, under power Find more here - / Contact us at -

Edge banding machine Type: KDF 440 Manufacturer: Brandt Year: 2013 In production: 2014 Adjustable ruler at the input Pre-milling unit 2 x 2.2 kW with DIA tools height 60 mm Edging unit A3 Cutting unit 2 x pneumatically controlled Milling unit 2 x R-2 mm End milling unit (corner cutter) 2 x 0.4 kW automatically controlledControl panel Spraying of LPZ/II® separating agent before the pre-milling unit, prevents adhesive from sticking to the surface of the part Pre-milling 2 x 2.2 kW Edging unit Cutting unit diagonally/perpendicularly 2 x 0.35 kW Profile milling unit 2 x 0.55 kW Shaped milling. end mill (corner mill) 2 x 0.4 kW Quickly replaceable profile sanders Flat sanders LP163/93® cleaning agent spray before polishing discs Polishing discs 2x edge banding unit - 1x transparent + 1 white Edge thickness 0.4 – 3 mm Thickness of edge banded material 8 – 60 mm Fe ...

Edge banding machine HEBROCK K36 Airtronic -used-PC-control with screen, touchscreen, swivelling control panel, program memory, automatic pressure bridge adjustment, feed by means of transport chain, workpiece support extendable, motor-adjustable infeed ruler, diamond joining cutter in parallel and counter-rotation, rapid heating basin, changing device for glue basins, use of PUR adhesives possible, cross-cut saw with HF motor, flush milling unit, flush / radius / chamfer milling unit, pneumatic changeover

Edge banding machine Type: F2 Manufacturer: Hebrock Year: 2014 Edge thickness: 0.4 – 3 mm Material thickness: 8 – 40 mm Working speed: 10 m/min Power supply: 400 V Pre-milling Hot melt adhesive application (EVA) Pressure zone Tape face trimming Radius milling Scrapers Machine in good condition, under power Find more here - / Contact us at -

Edge banding machine Type: B 80 KF VR Manufacturer: LANGE Year: 2022 Pre-milling unit Beveling unit (corner rounding) Polishing discs EVA melting unit Touch control panel 400 V / 3 phases Power 6.1 kW Machine in very good condition, under power Find more here - / Contact us at -

Edge banding machine Type: Tempora 45,03L Manufacturer: Format-4 Year: 2023 Installation length: 4230 mm Thickness of edging material: 0.4–3 mm Workpiece thickness: 8-45 mm Control unit smar-touch 10.4" Roving unit up to a height of 45 mm Application unit for processing EVA and PUR adhesives and easy-clean unit Machine in very good condition, under power Find more here - / Contact us at -

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, profile holder edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos -Dimensions: 665/540 / H375 mm -Weight: 30 kg

Manufacturer: Brandt Type of Machine : Edge Banding Machine Model: KDF 220 Year of Manufacture: 2012 Technical Specifications - Supply Voltage: 400Y/230V - Phases: 3-Phase - Frequency: 50 Hz - Fuse: 16 A - Maximum Operating Full Load Current: 14 A - Short Circuit Current Rating: 5 kA rms symmetrical - Control Voltage: 24 V - Largest Motor: 4.5 A - Largest Heater: 2.4 A - Enclosure Type: 1 Find more here - / Contact us at -

Edge banding machine Type: Top 2000 Manufacturer: Hebrock Year: 2007 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

Contour edge banding & trimming machine Make: VITAP Type: SMART-3 New machine - With swivable trimming station - For straight and formed workpieces (convex and concave) - 1 glue spreading roller for 10-60 mm panel thickness - Guillotine to cut bands up to 3 mm thickness - edge 0,5-3mm 2 tape feeding speed (3 m/min or 7 m/min) -Glue pot 1kg capacity - Tape plate Ø=520mm Solid Phenolic table - Easy to clean - With no heat transmission - Electronic temperature control - Foot pedal command for the guillotine Tilting trimming unit - with 1 high frequency motor HP 0.75 (kw0,55) - 1 cutter Head with 2 knives r1mm/r2mm/r3mm - Support tape plate Ø 600 mm - Semi-automatic end-cutter with motor 0,5 kw and blade Ø=125 mm - Working table 400 x 300 mm. - CE standards. Optional available for an extra charge: - Cutter (without knives) - Set ...

Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm -Weight: 28 kg

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm -Weight: 18.7 kg

Gluing unit, gluing part, gluing head, heating tank for edge banding, edge banding machine, melting unit with granulate container for edge processing machine -Manufacturer: Paul OTT, aggregate carrier from edge banding machine U 206 -Individual components: see photos -Dimensions: 780/400/H230 mm -Weight: 27 kg/piece

MOBIDELLI CNC Center Specifications General Information Manufacturer: MORBIDELLI, Italy Year of Manufacture: 2005 Model: PLANET HP 4618 Main Technical Parameters Max machining length: 4600 mm Machining length on two fields: 1900 mm Machining length on four fields: 720 mm Max width of elements: 1830 mm Element thickness: min 12 mm, max 60 mm Edge radius: min 10 mm (external), 30 mm (internal) Edge material thickness: 0.4 mm to 3 mm Supported edge materials: PVC, ABS, veneer, foil Work Areas Working Fields: 4 Vacuum consoles per field: 2 Consoles sizes: 145x145x110 mm and 145x60x110 mm (rotatable) Main Spindle Clamping system: HSK F63 - DIN 69893 Max tool weight: 6 kg Tool length: max 200 mm Max spindle speed: 18000 rpm Tool Changer Tool magazine capacity: 12 tools Only supports HSK F63 Edgebanding Unit  ...

Edge banding machine, edge banding machine, edge banding machine, finishing unit, buffing unit, modular assembly kit, format processing unit, double-end profiler, edge processing machine, sanding unit, edge banding unit -Unit: from edge banding machine BRANDT KM 35 -Motor: Groschopp type PM1 72-35 - Mot 180 V / 54 W. -Individual components: see photos -Dimensions: 425/270 / H260 mm -Weight: 24 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Weld edge former INDUMASCH SIEGEN Type V 12Masch. No.: 50674 Year of construction 1992Material thickness max. 40 mmChamfer angle 45Working speed approx. 3 m/min. Motor power 2 kWNetz connection 400 Volt, 50 Hz- Flow / return- Built-in guide roller for chamfer angle 45- Belt guard missingDimensions L x W x H 650 x 600 x 650 mmWeight 75 kggood condition; used

Edge milling machine on trolleys see pictures Condition: unchecked (6) Auction-ID: A7-45761-816

Edge magazine for edge banders -Spaces for edges: 5 pieces -Max. Edge width: 60 mm -freestanding -Dimensions: 900/530/H1030 mm -Weight: 208 kg

Edge closure for edge banders, edge banding machines -Manufacturer: Homag -for: 2x different edges -Number: 1x edge closure available -Price: per piece -Dimensions: 670/360/H350 mm -Weight: 43 kg/piece

bundle sizes from 30 x 12 x 50mm up to 350 x 200 x 200mm (minimum individual carton size 15 x 12 x 50mm), output up to 50 bundles per minute. Includes infeed and outfeed conveyors.

2-roller banding machine drinking flax ZW 400; cleaned and tested; Working width 400mm; Glue basin height adjustable; suitable for cold glue; 2 pcs. in stock. Two rollers gluing machine potions ZW 400; cleaned and checked; working width 400mm; glue reservoir adjustable in hight; used for cold glue; two machines on stock.

2 roller banding machine Hunkler LAM 600; good condition; cleaned and tested; Working width 600mm; Linen pool height adjustable; suitable for cold glue. Two rollers gluing machine Hunkeler LAM 600; good condition; cleaned and checked; working widht 600mm; glue reservoir adjustable in hight; used for cold glue.

Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.

Tünkers Liliput 210 banding machine; cleaned and tested; Working width 210mm; suitable for cold glue; Speed adjustable. Gluing machine Tünkers Liliput 210; cleaned and checked; working width 210mm; used for cold glue; adjustable in speed.

Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800 Baujahr / Year 10/2004 - Serial-No. 15005.225 Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic film Technical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 200mm Bandbreite / band width 30mm Taktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test