edge band used for sale

Edge banding machine Felder G480 The following units are available: Cutting, joining, flush milling, corner rounding, scraper blades, surface scraping blades Year of construction 2016 The machine is in top condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Description: Type of edging Thin edge Thick edge Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 50 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 11 m/min Top pressure yes Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2  ...

Description: Position: 1 SubFamily: Edgebander BATCH 1 Brand: BIESSE Model: STREAM B1 10.5 MDS Type of edging Thin edge Thick edge Gluing System EVA Hotmelt  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , Premilling Unit , Corner Rounding Unit Grooving Unit , Maximum panel thickness 60 mm Max. panel height 60 mm Min. panel length 150 mm Min. panel width 65 mm Min. edge thickness 0.3 mm Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , MDS No. Panel Sizing / Milling units Unit : pre-milling unit automatic timed intervention Edge coil magazine , no. positions 12 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , no. pressure roller 4 with positioning by NC , No. Edge Process ...

Description: Max. panel height 60 mm Min. panel length 130 mm Min. panel width 65 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Pressure with rubber belt No. Panel Sizing / Milling units , Unit : pre-milling unit Constructor model : R3 L20 motor power : 4 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for PUR glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units 10 Processing Unit : end trimming Constructor model : 8,42/39/B no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 Processing Unit : Corner rounding Constructor model : 08.342 Processing Unit : edge scraping Processing Unit : belt sanding Constructor model : 08.62 Processing Unit : belt sanding Const ...

Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...

Description: Type of edging Thin edge Thick edge Gluing System PUR Combination Squaring Edgebanding Machine First Pass Max Panel Width 3000 mm Max feed speed 40 m/min Operating Units Right Side 10 nr Operating Units Left Side 10 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 240 mm Max. panel width 3000 mm Min. edge thickness 0.4 mm Max. edge thickness 3.5 mm Max. forward feed speed 40 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units Left Side 1 NO. PANEL SIZING / MILLING UNITS LEFT SIDE 1 Unit : double chipper, top and bottom Constructor model : KD 11 motor power : 4.5 KW r.p.m. : 6000 RPM Same technical characteristics on the left side yes Edge coil magazine yes no. positions 12 Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes Roller set to press the edge yes No. Edge Processing Units 8  ...

Description: Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 5 mm Max. forward feed speed 12 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 1.8 KW Edge coil magazine yes glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.35 KW NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 motor power : 0.5 KW NO. EDGE PROCESSING UNITS 5 Processing Unit : edge scraping NO ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 14 m/min Maximum panel thickness 60 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 70 mm Min. edge thickness 0.3 mm Max. edge thickness 3 mm Max. forward feed speed 14 m/min Top pressure yes Pressure with idle wheels Panel support guides yes with positioning by NC yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Lamps to preheat the side of the panel yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes premelter for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 with positioning by NC yes No. Edge Processing Units 6 NO. EDGE PROC ...

- Exhibition machine - with swivel grinding unit, and oscillating sanding belt ---------- Technical Data ---------- Swivel range of grinding unit: 45 , Sanding belt width: 150 mm, Sanding belt length: 2,600 mm, Work table dimensions: 750 x 300 mm, Height adjustment range: 200 mm, Belt speed: 20 m/sec., Oscillation stroke: 20 mm, Suction nozzle: 140 mm, Motor 400 V: 4.0 hp / 3.0 kW, Motor oscillation: 0.34 hp / 0.25 kW, Dimensions (LxWxH): 1,600 x 850 x 1,350 mm, weight: 215 kg - Special price - new exhibition machine

Description: Rehnen Special edge sander Brand: Rehnen Type: SK-1 M-No.: 432 Year of construction: 1999 General specifications: Sanding belt: 2,700 x 150 mm Drive motor: 4 kW Belt speed: 15 m/sec. Table dimensions: 345 x 2,000 mm Dimensions: 3,000 x 2,000 x 1,500 mm Weight: 560 kg Description: Stable universal edge sander for straight, round and curved workpieces Areas of application: radius, shaped parts and straight workpieces Radius sanding with 80 - 300 mm sanding rolls Curved workpieces (allowing R=80 mm to R=1000 mm sanding) for almost all straight and curved workpieces Use of the entire sanding belt by adjustable oscillation Solid work table with integrated dust extraction serial number: 432, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,200 x 1,400 mm, weight approx.: 250 kg

Description: COMPOSITION: Anti-adhesive group Grinding group Infrared lamp Glue tank group Pneumatic shear, pressure rollers, edge feeding system Trimming group Edge trimming group Edge scraping group Brush group TECHNICAL DATA Panel height 8 - 45 mm Edge thickness 0.4 - 3 mm (coil) / 0.4 - 5 mm (strips) Minimum panel width 95 mm Minimum panel length (edge side) 210 mm Panel feeding ,speed 7 m/min Infeed grinding motors (each) 200 Hz - 12,000 rpm - 0.75 kW Glue tank resistors 1490 W - 6 cartridges Trimming blade rotation speed 9,000 rpm Trimming motor 50 Hz - 0.18 kW Trimming motors (each) 200 Hz - 12,000 rpm - 0.22 kW Milling tools ,with WIDIA combined knives (radius/chamfer) Ø 75 mm Z4 - shaft ,Ø 16 mm (r=2 - 3 mm) Total installed power approx. 5 kW Approx. Onsite Dimension. (l x w x h): 2,450 x 800 x 1,450 mm, weight approx.: 450 kg

Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and from 8 – 50 mm workpiece height.

Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F  , edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg

Description: Table length approx. 500 mm Approx. Onsite Dimension. (l x w x h): 600 x 600 x 300 mm, weight approx.: 30 kg

Description: Edgebander Width 1300 mm First rubber roller 90 Sh Ø180 mm Second group change roller 45 Sh Ø 200 mm 2 feed motors with 2 speeds serial number: 812,326, Approx. Onsite Dimension. (l x w x h): 2,000 x 2,300 x 2,400 mm, weight approx.: 3,000 kg

Approx. Onsite Dimension. (l x w x h): 3,100 x 900 x 1,650 mm, weight approx.: 1,000 kg

Description: Serial Number: KK00018498 Type: B04 Max. working width: 2 mm max. board thickness 50 mm , Minimum board dimensions: 180x65 mm , Feed speed 6 m/min Machine with gluing unit Saw for cross-cutting Profiling unit Machine equipped with PLC Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 1,500 mm, weight approx.: 300 kg

Hydropneumatic operation Profile height: 150 mm Max. hole height: 120 mm Resistor stroke: 100 mm Punching stroke: 18 mm Press force: 28 kN at 8 bar Max. profile height: 100 mm Weight: approx. 250 kg

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change de ...

Description: Min. edge thickness 0.3 mm Max. edge thickness 3 mm , Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 3 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , glue pot for EVA hot melt glue premelter for EVA hot melt glue , Roller set to press the edge no. pressure roller 7 with positioning by NC , No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.8 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.5 KW r.p.m. : 12000 RPM , NO. EDGE PROCESSING UNITS 3 Processing Unit : Corne ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System PUR Premilling Unit yes Corner Rounding Unit yes Grooving Unit yes Max feed speed 24 m/min Maximum panel thickness 60 mm Operating Units 9 nr Min. panel height 12 mm Max. panel height 60 mm Min. edge thickness 0.4 mm Max. edge thickness 20 mm Max. forward feed speed 24 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes premelter for PUR glue NORDSON Roller set to press the edge yes with positioning by NC yes No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top a ...

Description: Max. panel height 55 mm Min. edge thickness 0.4 mm Max. edge thickness 12 mm Max. forward feed speed 13 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit automatic timed intervention motor power : 2.2 KW Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue Roller set to press the edge no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 automatic timed intervention motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.55 KW r.p.m. : 11300 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : Corner rounding no. motors : 2 motor power : 0.4 KW NO. EDGE PROCESSING UNITS 4 Processing Unit : glue scraping NO. EDGE PROCESSING UNITS 5 Processing Unit : buffing no. motors : 2 motor  ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Max feed speed 9 m/min Maximum panel thickness 50 mm Operating Units 4 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 9 m/min Top pressure yes Pressure with idle wheels Panel support guides yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : glue scraping Safety standard CE mark yes Total installed power 3.5 KW  ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 55 mm Operating Units 7 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 8 mm Max. forward feed speed 11 m/min Top pressure yes Pressure with idle wheels Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : HL 6130 no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim  ...

Description: serial number: 201011RX000004 machine type: monolateral, left side total installed power 21,8 KW, 59A, 50Hz panel length - min 120 mm panel width - min 60 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.4 mm to 3 mm edge thickness for strip: 3-16mm min length for strips: 180mm minimum distance between 2 panels: 800mm edge banding strip height - min 12 mm - max 63 mm adjustable feed speed from 10 m/min up to 20 m/min motorized height adjustment CN control, anti adhesive spraying device edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated pressure unit for straight edges snipping unit, 2 x motor 0,5kw, 12.000 rpm rough trimming unit, 2 x motor 1,1 kw, 12.000 rpm fine trimming unit, 2 x motor 0.37 KW-12.000 rpm corner rounding unit, 2 x motor, 12.000 rot/min profile scraper unit  , s ...

Description: With TEKNOMOTOR milling motor, model 3140, up to 12000 rpm , Power supply: 220/380 volts From 1.55 to 2.70 amps Frequency: 200 Hertz Power: 0.5 kilowatts or 0.7 horsepower  , Machine power supply: 230 volts, 50 Hertz, 1.5 KW, 20.5 amps. weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 650 x 1,000 x 1,200 mm

Description: - Edge profiling, sanding and painting system - Serial number 03083 - Total installed power 117 KW - Working width from 200 mm up to 2500 mm - Workpiece thickness from 6 mm up to 80 mm - Minimum workpiece length 90 mm - Adjustable feed speed from 5 m/min up to 44 m/min - Power of the feed motors: 7.50 KW and 0.75 KW - Power of the machine opening motor 1.50 KW - Machine equipped identically on both sides with 9 units on each side: - 1 - Milling unit: adjustable in depth, height and inclination, motor 7.50 KW-6000 rpm - 2 - Milling unit: adjustable in depth, height and inclination, motor 4 KW-3000 rpm - 3 - Fine milling unit: upper and lower motor with 1.80 KW-12000 rpm each, tiltable up to 45° - 4 - Belt sanding unit: motor 2.20 KW-940 rpm, swiveling, height and depth adjustable, with pneumatic sanding pad - 5 - Belt sanding unit for upper bevel: Motor 1.10 KW-930 rpm, swiv ...

Description: Floor size: 6600 x 1290 mm No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  , Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg

Description: - Edge banding machine - Serial number 02352 - Total installed power 21 KW - Edge thickness from 0.40 mm up to 12 mm - Workpiece thickness from 10 mm to 45 mm - Minimum workpiece length 150 mm - Feed motor 2.20 KW - Control system - IMA 08.376 joint trimming unit, 2 x motor 3 KW-12000 rpm - IMA 283.08 Gluing unit with pot for granulated hot melt adhesive - Pressure unit with (1+5) rollers - IMA 08.415 Cross-cut unit, 2 x motor 0.66 KW-11100 rpm, swivels up to 8° - IMA 08.0555 Rough trimming unit, 2 x motor 1.80 KW-12000 rpm (upper motor missing) - IMA 08.346 Profile trimming unit, 2 x motor 0.50 KW-18000 rpm - IMA 08.519 Profile scraper unit - Flat scraping unit - Milling unit, motor 2 KW-12000 rpm - IMA 08.612 Edge buffing unit, 2 x motor 0.25 KW-1320 rpm IMPORTANT: The return system shown in the photos is NOT included in the scope of delivery Approx. Onsite Dimension.  ...

Description: Rubber pads conveyor belt renewed approx. 2022 Annual maintenance by HOMAG incl. various new parts (see photos) Second glue pot (serviced annually) Single-sided machine for joint trimming of straight workpiece edges, gluing and finishing of various edge materials from the roll or as strips, up to 20 m edge thickness, with longitudinal and transverse throughfeed. Fixed stop side on the left. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: BASIC MACHINE WORKPIECE TRANSFER DEVICE - TOP PRESSURE CONTROL power control PC22 FREE SPACE Joining unit GLUING PART A20 BASIC for rolls up to 3 mm and strips up to 20 mm NOISE PROTECTION CAPPAGGREGATE FREE SPACE for further processing units BASIC MACHINE: Continuous machine stand for setting up the processing units Workpiece support with extendable roller rail approx. 800 m Glue roller drive for feed stop Glue container lift ...

Description: Workpiece and edge parameters Workpiece width min: For workpiece thickness 8-22 mm | 70 mm For workpiece thickness 23-40mm | 120 mm For workpiece thickness 41-60mm , 150 mm depending on the workpiece length Workpiece protrusion | 38 mm Workpiece thickness | 8 - 60 mm Max. edge height = workpiece height, + 6 mm Edge material roll / 0.4 - 3 mm Edge cross-section max. For PVC | 135 mm For veneer | 100 mm Max. roll diameter , 830 mm Edge material strip , 0.4 - 15 mm (or 12 mm) (When using the VKNR 4845 exchange trimming unit, the max. edge thickness is 12 mm!) Max. edge cross-section For strips ' 600 mm If no radius is specified, R=2 mm is retracted and delivered serial number: 0-261-20-5413, workpiece thickness: 8 - 60 mm, feed: 8 - 18 m/min, joint trimming unit: 2 x 2,2 kW, gluing unit: A12, snipping unit: 2 x 0,35 kW, rough trimming unit: 2 x 0,55 kW, ...

Description: The machine will not be available until around May 2024. Basic machine Continuous machine stand for setting up the processing unit Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive for feed stop Glue container lift for feed stop Workpiece-operated glue container clamping Adjustable infeed guide Pneumatically controlled infeed stop Workpiece transport device Transport chain 80 mm wide Precision running and guide surfaces hardened Transport chain magnetically braked Top pressure driven by composite V-belt Manual height adjustment Digital position indicator Technical data Operating voltage: 400 Volt, 50/60 Hz Feed rate: 18 - 25 m/min Feed rate with FK11 profile cutter: max. 20 m/min Working height: 950 mm Working width for workpiece thickness 22 mm: min. 60 mm Working width for workpiece thickness 40 mm: min. 105 mm  ...

Description: • Edgebander, edge banding machine • Edge thickness from 0.40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4.40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0.45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0.45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0.45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOL ...

Description: • Edgebander • Edge thickness from 0.40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Adjustable feed speed: 8 m/min - 20 m/min • Control • Joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • Pressure group with (1+2) rollers • End trimming unit with 2 motors • HOLZ-HER 1823 fine trimming unit, 2 x motor 0.60 KW-12000 rpm • Profile scraping unit • HOLZ-HER 1983 profile trimming unit • Edge buffing unit • Milling group, motor 3.80 KW-12000 rpm • Sanding belt unit Approx. Onsite Dimension. (l x w x h): 7,550 x 1,150 x 1,900 mm, weight approx.: 4,000 kg

Description: • Edgebander with return system • Serial number 10347 • Edge thickness in strips up to 12 mm • Edge thickness in roll up to 3 mm • Worpiece thickness up to 40 mm • Adjustable feed speed from 5 m/min up to 25 m/min • Feed motor 5.50 KW • Joint trimming unit, 2 x motor 3 KW • Edge feeder for strips and roll, edge magazine for 6 edge coils • Gluing unit for PUR glue • Pressure group with (1+5) rollers • End trimming unit, 2 x motor • Rough trimming unit, 2 x motor 1 KW • Profile trimming unit, 4 x motor • Profile scraping unit • Flat scraping unit • Edge buffing unit • Milling group • Return system with inclined air table and dimensions 2020 x 1000 mm, motorized belt conveyor with useful dimensions 9000 x 1200 mm, inclined roller conveyor with dimensions 2500 x 1200 mm Approx. Onsite Dimension. (l x w x h): 12,275 x 3,800 x 2,570 mm, weight ...

Description: • Edgebander • Serial number 14589/9-810 • Total installed power approx. 9 KW • Edge thickness from 0.40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0.75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0.22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0.60 KW-9000 rpm Approx. Onsite Dimension. (l x w x h): 4,000 x 1,450 x 1,250 mm, weight approx.: 1,000 kg

Description: • Edgebander • Serial number 147/9-909 (1999) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0.30 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1.50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0.35 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0.60 KW-9000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0.12 KW-1640 rpm Approx. Onsite Dimension. (l x w x h): 4,200 x 1,200 x 1,750 mm, weight approx.: 2,000 kg

Description: • Edgebander • Serial number 2697 • Edge thickness in roll from 0.40 mm up to 3 mm • Worpiece thickness from 8 mm up to 40 mm • Feed motor 0.37 KW • Edge feeder, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+2) rollers • End trimming unit • Fine trimming unit, 2 x motor 0.36 KW-12000 rpm, tilting Approx. Onsite Dimension. (l x w x h): 2,800 x 980 x 1,450 mm, weight approx.: 700 kg

Description: • Panels returning system for edgebander • Serial number AE/030174 • Maximum workpiece dimensions approx. 2000 x 800 x 60 mm • Consisting in: • 1 - Unloader-pusher • 2 - Inclined tilting air table with dimensions approx. 1910 x 1100 mm • 3 - 2 x driven belt conveyor, useful dimensions 3000 x 800 mm each Approx. Onsite Dimension. (l x w x h): 6,000 x 2,650 x 1,300 mm, weight approx.: 1,800 kg

Brought from Germany. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

Description: Workpiece: Workpiece thickness: min. 6 mm, max. 45 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Maximum edge thickness: 3 mm Drive: Feed rate: 10 m/min Power: 1.5 kW Control voltage: 24 VDC Compressed Air: Operating pressure: 6 Bar Limit pressure: 8 Bar Connection: Quick coupling, nominal width 7, hose inner diameter at least 12 mm. Air consumption: 5 L/min Machine comes without RETURN , serial number: 98/1-003, Approx. Onsite Dimension. (l x w x h): 5,335 x 1,670 x 1,415 mm, weight approx.: 3,000 kg

Description: Flexline HOMAG PROFI KAL 330/6/A3/S2 edge banding machine  , , , serial number: 0-200-24-9153 is equipped as follows:  , , , HOMAG PROFI TBL 100/35/12 feed table with fully automatic workpiece feeding system WZ10 for workpieces with different dimensions in longitudinal and transverse direction Technical data: - Workpiece length 250 - 2500 mm - Electro-pneumatically controlled cross weigher - Air cushion table ( is not included in the scope of delivery )  , , , 2 HOMAG PROFI KAL 330/6/A3/S2 edge banding machine Technical data: - Universal trimming unit UF11, electro-pneumatically controlled  ,Note: the feedback is not included in the scope of delivery  , serial number: 0-200-24-9153, workpiece thickness: max.60 mm, feed: 18-25 m/min, joint trimming unit: Ja/Yes, snipping unit: Ja/Yes, fine trimming unit: Ja/Yes, pro ...

Description: Cross-cut saw unit : 1 motor / Flush trimming / Raidus trimming / Flat scraper blade Buffing unit Glue thickness max : 8 mm Thickness of roll material max : 3 mm Units synchronised : pneumatic Gluing height max : 50 mm Workpiece length min : 300 mm - Workpiece width min : 90 mm Feed rate max : 10 m/min Strip magazine : Yes Total connection : 12.6 kW ' Some of the technical data is taken from the manufacturer's brochure. Actual values may differ' Machine length : 4,300 mm Milling motors have slight bearing noises - tools must be changed - slight leakage at the DL cylinders. PRICED IN FUNCTIONALLY TESTED CONDITION , SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. , If the photo shows obje ...

wide belt: 150 mm; veneer grinding device: yes; oszillation: yes; table tiltable: yes / 0-30°; table size: 2 x 1430 mm x 220 mm; suction connection: 120 mm; motor power: machine length: 1500 mm; machine width: 750 mm; weight: 450 kg;

Pressing of profiles up to a profile height of 68 mm Pressing force: 40 kN Pneumatically movable counter bearing, mechanically locked With support arms Weight: approx. 240 kg

Description: Quick melt glue pot Heated infeed fence Roll trimmer: pneumatic up to 3 mm HF End trim saw 1st Top/Bottom trimming station 2nd Top/Bottom trimmimg station undercarriage edge magazine with: 1 -fold roller, edge thickness: 0.4 - 5 mm, workpiece thickness: 40 mm, workpiece pre heater: ✔, snipping unit: ✔, fine trimming unit: ✔, total power approx: 11 kW, packing measure approx (l x w x h): 4,000 x 1,800 x 1,600 mm, Approx. Onsite Dimension. (l x w x h): 3,600 x 1,400 x 1,200 mm, weight approx.: 690 kg

Description: • serial number 3141 • total installed power 16 kw • maximum workpiece thickness approx. 100 mm • maximum opening of the lateral support • adjustable feed speed , consisting of: 3 x Belt sanding units motors 2.20 kw, tiltable,adjustable height and depth pneumatical sanding pad 2 x Disc sanding units, tiltable, adjustable height and depth , separated electrical control cabinet serial number: 3,141, Approx. Onsite Dimension. (l x w x h): 6,000 x 2,800 x 1,700 mm, weight approx.: 2,500 kg

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Description: machine number: 0-261-20-8279 workpiece thickness: 8 - 50 mm edge material thickness: 0,4 - 3 mm feed speed: 11 m/min extraction diameter: 3x80/1x100 mm pneumatics: 6 bar  , please also have a look at the PDF document of this machine serial number: 0-261-20-8279, edge thickness: 3 mm, workpiece thickness: 8 - 50 mm, feed: 11 m/min, Approx. Onsite Dimension. (l x w x h): 4,153 x 1,525 x 2,182 mm, weight approx.: 1,300 kg

Description: supply voltage 3 x 400 (50 Hz) V standard installed power 11 kW, with the airmotion option 16 kW feeding table with air cushion 1050 x 400 mm milling group application group cutting group at the ends rounding group at the ends radia finishing group surface finishing group finishing group with brushes constructive characteristics, standard working dimensions: the minimum width of the processed part - 70 mm the minimum length of the processed part - 140 mm the minimum height of the processed part - 8 mm the maximum height of the processed part - 60 mm the thickness of the applicable PVC/ABS edge film - 0.4 - 3.0 mm applicable thickness of solid wood wand - 0.4 - 12.0 mm compressed air working pressure (min/max) >,7 / 12 bar compressed air system pressure >,8 bar internal diameter of compressed air installation connection: 13 / 1/2' mm for more details ...