edge band used for sale

It works without any problems, although it requires service and adjustment. You need to program the inverter, set the aggregates to make corners and seal the glue tank, it sells as the price is negotiable, I will consider any proposal

BIESSE AKRON 1440 NC Control Panel Numerical control with 10" monitor Plate height: 10 to 60 mm Roll edge thickness: 0.4 to 3 mm Strip edge thickness: 0.4 to 10 mm Minimum plate length: 140 mm Minimum plate width (at 140 mm length): 85 mm Minimum panel width (at 250 mm length): 50 mm Chain feed speed: 12 m/min Two additional glue trays

CEHISA BRYKO EDGE BANDING MACHINE Glue tank Clipping the back of the front of the ball Milling up and down milling cutters Compact dimensions - length 1900mm

Equipment: - PLC control - Edge magazine - Glue application system "Cartridge" -Printed work - Cross-cutting unit - Milling unit, for flush/chamfer/radius - Shape milling unit - Radius scraper blade Specifications: - Length: 4,445 mm - Width: 1,500 mm Working Dimensions: - Workpiece thickness: 6-45 mm - Edge thickness: 0.4-8 mm - Workpiece width: min 60 mm - Workpiece length: min. 180 mm - Feed speed: 8/16 m/min without corner copying - Extraction connection: 2 x Ø 70 mm Static vacuum 1650 Pa Min. air velocity 20 m/sec - Compressed air connection 6 bar technical data subject to actual equipment!

OTT Pacific V12-F PLUS PLC Comp. Control LCD display Pre-milling unit immersion-controlled Full car. Roller and edge magazine High-speed gluing station / overhead Double roller top pressure with electr. Positioning Auto. Inlet ruler Flush caps pneum. 0-3° Flush milling/bevel milling 15/30/45° - 12 mm Radius milling R-2, R-5 Corner rounds Radius Scraper Blade Surface scraper blade Soundproof booth with room extraction Machine from a small business with very few linear meters in TOP CONDITION

Edge banding Holz-Her Type: 1417 Sprint Year of construction: 1999 Banding thickness max. 8 mm Workpiece thickness = banding height 6 – 45 mm Workpiece width min. 60 mm Workpiece length min. 180 mm Workpiece protrusion via the transport chain on the assembly side 30 mm Feed speed 11 m/min. Feed motor 1.5 kW Swivel control panel Machinery: Pre-milling unit 1961 Edge feeding 1901 - fully automatic edge feeding of roll goods and stiff goods Glue application station 1906 or 1910 cartridge system Printed in 1913 Cross-cut unit 1918 – 2 cross-cut saw motors guided diagonally on round bars Milling unit 1942 – flush/radius/chamfering station Milling unit 1942 M – flush/radius/chamfering station Scraper unit 1929 - for radii up to 3 mm Form milling unit 1983 – 1 motor 0.6 kW 18000 rpm, copy corners up to 3 mm edge thickness Surface scraper unit 1964 – for  ...

Sale of a gebr. edge banding from the manufacturer Hebrock. Specifications: Year of construction:1992 Edge thickness:0.4-8.0 mm Min. workpiece length:300 mm Min. workpiece width:70 mm Extraction connection Ø:140 mm Weight (kg):800 Dimensions (L x W x H mm):4100 x 1400 x 1300 mm Workpiece height:8-50 mm Chain feed:11 m/min Cross-cut saw unit:Yes Flush & Radius Milling Unit:Yes Hot melt glue container Support plates Roller capping pneumatically up to 3 mm edge thickness Flush milling unit

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

Edge sanding machine Make: Kündig Model: Basiq Year of construction: 2015

LOSER Orbital Sander Number of sanding belts 2 Sanding belt width 120mm Maximum workpiece diameter 50mm Minimum material length 600mm Motor power of grinding units 2×1.1kw Feed motor 1.1kw Extraction nozzle 150mm Dimensions of the machine 130x120x200cmh

Loser RS340 Round Grinder Sanding belt width 150mm Workpiece diameter 6-60mm Sanding belt speed 24m/sec 2.2kw main motor Material Receipt Dimensions of the machine 180x110x145cmH

Cross sander for Comec chair components 5.5kw main motor Sanding belt width 100mm Extraction nozzle 110mm Dimensions of the machine 233x60x140cm

Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...

Code: 0233 Brand: MCR - ITALY Model: EASY EDGE/5 - CE Standard Automatic edge bander for edging panels, veneer edges, PVC, solid wood, abs, etc. - CE Standard Technical data: Max edge thickness mm 5 Max panel height mm 80 Min panel height mm 10 Min panel width mm 80 Adjustable feed speed Composition: Gluing unit: Heat regulator glue tank - Heat regulator roller - Automatic strips loader End cutting unit consisting of 2 motors of 0, 37 kW - Blade diameter mm 125 - Blade inclination Fine trimming unit :allows the trimming of the top and the bottom of the applied edge - 2 motors Kw 0,37 - N° 2 combined Vidia cutters with inserts to 30° plus flat sharp Polishing unit - N° 2 motors - Brush diameter mm 160 Control panel Sound-proof cabin Total absorption A 10 Overall dimensions mm 3100 x 1000 x 1640 h Weight kg 950

- Exhibition machine - relief rollers on the stop rulers, with swivel grinding unit, and oscillating sanding belt, veneer grinding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding roller ---------- Technical data ---------- sanding belt dimensions: 3,000 x 200 mm, work table dimensions: 960 x 350 mm, work table height adjustment: 230 mm, Grinding surface: 1,050 x 300 mm, belt speed: 20 m/sec., oscillation stroke: 20 mm, extraction nozzle: 140 mm, motor 400 V: 4.0 hp / 3.0 kW, dimensions (LxWxH): 1,900 x 900 x 1,350 mm, weight: 290 kg new exhibition machine

Inv. Num. : 5133 Type: ACTIVA/1-48 Producer: STEFANI Created: 2001 Parameters: Edge thickness: 0.4-16 mm Part thickness: 10-60 mm Minimum edge length in slats: 260 mm Minimum length of solid plywood: 260 mm Compartment capacity: 1.6 kg Drawer capacity: 8 kg/h Space for mounting the device: 1270 mm The machine is in good condition.

Gebr. Edging Press pneumatic 6 pressing units Swivel Chassis incl. heating rail ELKOM: gold anodized Length: 310 cm 220V / 1,500 W up to 100°C

Edge Sanding Machine Belt Sander SCHMID Height-adjustable support table Support table can be tilted Additional support table on the deflection roller for contour grinding. Integrated extraction fan incl. receptacle device for feed. suitable feeds can be found in my other articles. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Lot 6000 pcs protection bracket for packaging Edge protection bracket made of cardboard, dimensions approx. 150 x 60 x 60 x 3mm The brackets are very stable and ideal for packing pallet goods and as corner protection, edge protection when lashing. Dimensions approx. 1200 x 800 x 600mm (LxWxH). Weight approx. 290kg. The edge protector brackets are from a stock clearance and are unused. Sold as lots only, no smaller quantities possible. The goods can be presented by appointment at our site.

Gebr. Edge sanding machine Wild + Gap NFSB1 Motor power: 2.6 / 3.2 kW (2 speeds) Table size: 30 x 100 cm Table adjustment height + depth by handwheel Swivel grinding unit Veneer grinding device Support table for radius grinding (diameter roller: 100 mm) Sanding belt height: up to 200 mm Suction connection: 140 mm Feed console incl. various sandpaper Dimensions: L: 180 cm W: 95 cm H: 120 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

belt width: 150mm; belt length: 2600mm; oszillation: ja; sanding rollers for rounding: 1; grinding unit swiveling: ja; table size: 750mm x 290mm; suction connection: 120mm; motor power: 3kW; machine length: 1700mm; machine width: 700mm; weight: 180kg; properties Suitable for sanding wood, plastics and similar materials Oscillating sanding belt ensures a high removal rate and a clean sanding pattern Double-sided suction connection 80/100 mm for optimum chip removal Grinding belt oscillation with separate gearmotor, optionally switchable Sprung belt tension, thereby automatic compensation of belt length differences User-friendly height adjustment of the work table by means of handwheel Torsion-free sheet steel stand ensures vibration-free operation delivery sanding belt Sanding belt 2600 x 150 mm - K100 additional table graphite coating miter suction hose

Band width: 150mm; Band length: 2740mm; Veneer grinding device: no; Oscillation: yes; Roll diameter: 115 mm; Swivel grinding unit: yes / 90Â - 0Â; Work table: 900 x 305 mm; Additional table: 290 x 260 mm; Belt speed : 16 m/sec. m/sec.; Suction port: 100mm; Motor power: 3kW/400V; Machine length: 1540 mm; Machine width: 750 mm; Weight: 220 kg; Properties Oscillating abrasive belt ensures a high stock removal rate and a clean sanding pattern Large work table with integrated T-slot to accommodate the mitre stop Easy sanding belt change by means of a quick-release lever Spring-loaded belt tension, thus automatic compensation of belt length differences Infinitely swivelling grinding unit for vertical and horizontal grinding Graphite coating on the back wall of the sanding belt increases the sliding properties of the sanding belt Additional emergency stop on the sanding unit fo ...

Equipment/technical data: - e-Motion control with 21" smartouch instead of 10" tempora F 800 Ser - Upper pressure beam motor-controlled, adjustable workpiece height 8-60 mm - Chain feed 12 m/min, 1.5 kW, Minimum workpiece length 140 mm - Turntable edge magazine for roll edge material 0.4 - 3 mm and strip magazine for 12 pieces 10 mm edges - Edge feeding for roll and strip material - pneum. Controlled gluing unit, Teflon-coated, for 1.5 kg EVA granules, with synchronized glue roll and quick-change system. (for PUR adhesive processing, taking into account the Adhesive processing guidelines) - Pneumatically operation-controlled pressure unit e-motion (one driven, two conical contact rollers) tempora 60.12/2: 0-12mm - Impact shears for roll material - Cross-cut saw with 2 motors - Joining milling unit 2 x 1.5 kW - Upper and lower combination milling unit, 0.75 kW each, flush a ...

Code: 0241 Brand: HOLZHER Model: 1402 MF - CE Standard Automatic edgebander for wood, furniture, veneer, Abs, melamine, PVC, solid wood, and other materials - CE Standard Technical data: Edge thickness mm 0,3 - 3 Max panel height mm 45 Min panel length mm 180 Min panel width mm 60 Glue loader Double end cutter: N° 2 motors 0,22 Kw - Rpm 9000 Tilting trimmers: N° 2 motors 0,6 Kw - Rpm 18000 Brush unit: N°2 motors Kw 0,15 - Brush diameter mm 150 Protection cabin Compressed air Bar 6 Overall dimensions mm 3250 x 1220 x 1200 h Weight kg 680

Edge banding installation consisting of the following elements: - feed table TB 10/10/20 - edge bander KAR 610/20/PU/S2 - panel turning station cross/longitudinal TD 51/30/12 - destacking robot KUKA KR 180-2 PA - Ligmatech return system installation specifications: workpiece dimensions length 300 - 3200 mm width 120 - 1200 mm (for dogs), 1800 mm (equal to longitudinal entry) thickness 12 - 60 mm weight max 80 kg edging material 0.4 - 2.0 mm throughput speed 25m/min robot 10 strokes /min Equipment edge bander: Infeed fence automatically adjustable anti adhesive sprayers Squaring device UF20: 2 x 4.0 KW Workpiece preheating Glue application unit PU34 6-fold edge magazine for rolls Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment End trims HL86, pneumatic adjustment phase/straight, 2 motors 0.22 kW Rough trimming: 2 x 0.55 KW Contour trimming FF12 , 4 motors 0.4 kW Pr ...

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATIC NC16

Working piece thickness (Radius) ca. 16 - 55 mm Working piece thickness (Chamfer) ca. 12 -55 mm Working piece width min. Ca. 30 mm Inner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours) Edge thickness max. ca. 3 mm Milling motor 2 x 0,4 kW, 10950 o/min. Dust extraction 1 x diam. 80 mm Working height 900 mm Radius 3 mm tooling

Profile height max. 160 mm Resistor stroke 100 mm Punching stroke 20 mm Pressing force 35 kN Compressed air connection 6-8 bar Weight approx. 350 kg

BIMATIC edge banding machine model SYNCRO 4105.8 : - Electronically controlled control panel - Usable panel thickness from 8 to 45 mm - Forward speed 10 m/min - Overall dimensions approx. 5.1 x 1.2 x h=1.6 m - machine according to CE standards, year 1998 Operating units: - Gluing unit with: hot-melt glue pot with rapid heating (about 5/6 min.) loader and shear for roll material from 0.4 to 3 mm loader for solid strips up to 8 mm - Double vertical trim panels, 0.3+0.3 hp motors, tiltable 0 - 15° - Overlapping trimmers, non-tilting, 0.5+0.5 HP motors - 0 - 25° tilting trimmers, 0.5+0.5 hp motors - Rounder with 1 engine HP 0.5 - Straight edge sander, HP 2 motor

EDGE BANDING machine BIMATIC B 220 IR-S second hand machine for edging veneer, PVC, Abs , wood volt. 220 ( 3 phases ) . by applying a 9 kW electric transformer the machine operates at 380 volts. composed by : 1. glue pot 2. edge cutting shear 3. end trimming unit 4. trimming unit / tilting chamfering unit technical details : edge thickness min. / max. mm. 0,4 / 10 panel height mm. 60

Code: 0253 Brand: CEHISA Model: BRYKO - CE Standard Automatic edge bander for wood, Pvc, veneer, abs, melamine edges - CE Standard Technical data: Edge thickness min/max 0,4/2 mm Min/max panel height 8-40 mm Min panel length mm 120 Min panel width mm 75 Panel feed speed mt/min 5,5 Composition: Gluing unit: Glue tank with digital thermostat - Automatic feeder for roll and strip edges - 1 motorised roller + 1 idle roller 2-blade End cutting unit with high-frequency motor - Tool rotation speed 12000 rpm Upper and lower trimming unit - Tool rotation speed 12000 rpm Total installed power Kw 2,5 Compressed air 6-7 bar Overall dimensions mm 1800 x 950 x 1200 h Weight kg 430

Code: 0772 Brand: DE STEFANI Model: MVT 1000 Edge sander with 1 group for flat and shaped edges, solid wood edges, Mdf, veneered, melamine paper covered, varnished, for furniture, doors, panels, etc. Technical data: Tilting sanding group suitable to sand rough or finished mouldings with pad for flat and shaped surfaces 2 speed motor rpm 660/1450 Max working height mm 100 - Adjustment by handwheel Feed track speed variator from 6 to 20 mt/min Extractable roller conveyor for panel support Abrasive belt cleaning blower N° 1 suction mouth diameter mm 120 N° 1 suction mouth diameter mm 100 Compressed air 6-7 atm Overall dimensions mm 2100 x 1300 x 1400 h Weight kg 1100

•Compact design - edge thickness 0.4 - 6 mm •Control panel with selector switch for adjusting the units •Pre-milling unit for attachment in front of the gluing part •Fully automatic edge magazine for rolls and strips •Adhesive application station cartridges + PU gluing •Workpiece height 6-60 mm •Printing unit pneumatic •Cross-cut unit 1918 pneumatically for rolls and strips up to max. 6 mm edge thickness •with pneumatic changeover from 0-10° inclined of the cross-cut saws • Milling unit flush milling 6 mm, radius milling 3 mm, bevel milling - 15° •Scraper unit for chamfers and radii with 2 scraper blade carriers •pneumatic engagement and disengagement •Surface Scraper Unit - Finish •Machine WORKSHOP overhauled in TOP CONDITION from stock Lieboch

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...

Key data: 20 mm, 60 mm, 8365 mm

I am selling a fully equipped edge banding machine HOMAG EDGETEQ S-500 KAL370 Ambition 2484, built in 2019: Configuration: Input stop servo-motor adjustable Manually adjustable joint milling Edge banding with preheating tanks 2 pcs. Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling top + bottom pneumatically adjustable Round unit 4-motor servo motor adjustable R2 / second set R1 included Swivel groove saw unit Radius scraper blade Multiradius servo motor adjustable Scraper blade surface can be pneumatically adjusted Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 8-60mm Edge material thickness 0.4-12 (20)mm Feed speed 16 to 25m/min. Overall length including feed plate 8365mm Mileage status 833,000 meters. Input appar ...

Description: Prism support ,600 mm long, pivotable Approx. Onsite Dimension. (l x w x h): 600 x 600 x 400 mm, weight approx.: 15 kg

Description: Serial number 1056 Support surface approx. 500 x 100 mm Approx. Onsite Dimension. (l x w x h): 500 x 400 x 300 mm, weight approx.: 50 kg

Description: Technical details x-travel 250 - 500 mm Sheet thickness 2 mm Workpiece width 0 - 3 mm Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,400 mm, weight approx.: 150 kg

Description: Indumasch Siegen edge milling machine Deburring machine, installed on a roller transport carriage, milling depth 6 mm Approx. Onsite Dimension. (l x w x h): 700 x 500 x 1,300 mm, weight approx.: 75 kg

Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 30 kg

Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...

Single-sided edge banding machine Brandt type OPTIMAT KDF 650 C edition Specifications: • Feed rate (m/min.): 8 - 18 • Feed max. with form milling machine (m/min.): 14 • Working height (mm): 950 • Pneumatic connection (bar): min. 6 • Overall length (mm): 6,060 Workpiece and edge parameters: • Workpiece width min. at workpiece thickness 8 - 22 mm: 70 mm (depending on workpiece length) • Workpiece width min. for workpiece thickness 23 - 40 mm: 120 mm (depending on workpiece length) • Workpiece width min. at workpiece thickness 41 - 60 mm: 150 mm (depending on workpiece length) • Workpiece protrusion (mm): 38 • Workpiece thickness (mm): 8 - 60 • Edge height max. = workpiece height (mm): + 6 • Edge Material Roll (mm): 0.4 - 3 • Max. edge cross-section for PVC: 135 mm² • Max. edge cross-section for veneer: 100 mm² • Roll diameter max. ( ...

For sale is the SCHIATTI edger, model FPS 10, built in 2009 in very good condition, with only 20,700 meters !

Description: Prism support length 500 mm Cutter head cutter diameter approx. 100 mm Speed range 1500 to 4500 rpm Table travel distance approx. 550 mm Approx. Onsite Dimension. (l x w x h): 900 x 400 x 600 mm, weight approx.: 60 kg

Description: Motor power HP (KW) 2 (1.5) Belt speed 15 m/sec Effective working length 800 mm Belt width 150 mm Belt length 2250 mm Rear table dimensions 625×220 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 1,300 mm, weight approx.: 110 kg

Description: Motor power HP(KW) 2.5(1.8) Belt speed 14 m/sec Effective working length 860 mm Belt width 150 mm Belt length 2400 mm Table dimensions 730X300 mm Rear table dimensions 420X400 mm Approx. Onsite Dimension. (l x w x h): 1,350 x 800 x 1,350 mm, weight approx.: 160 kg

Holz Her Sprint 1321 FÜ + PU heavy-duty version - edge thickness 0.4 - 15 mm PLC Screen Control Edgecontrol Motorized, positioning-controlled bridge height adjustment Pre-milling unit for fastening upstream of the gluing station Fully automatic edge magazine for rolls and strips Glue application station cartridges + PU gluing Car. Glue height adjustment / tactile nozzle Printed plant 1913 pneum. Cross-cut unit for rolls and strips 1918 - 15 mm with pneumatic changeover of 0-10° incline of the cross-cut saws Multifunctional milling unit with mot. Adjustment: Flush milling - 15 mm, radii and bevel milling -15° Frommilling unit - corner rounds 1833 Scraper unit for chamfers and radii 1929 pneum. pneumatic indentation and disengagement Surface Scraper Unit - Finish pneum. Buffing unit for replastering and edge polishing with 2 textile discs HIGH-END spraying device Compl ...

Description: Conveyor belt size 1200x380 mm On mobile undercarriage Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,100 mm, weight approx.: 250 kg

Key data: 1 mm

Equipment and technical data: Edge banding machine for pre-coated edge material High-performance heat gun Roll capping electromagnetic Edge milling machine Sytem Hebrock End capping: Cross-cut module for flush cutting the front Edge protrusion Feed: 3-roller system Boom on both sides Add-on trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. workpiece length approx. 170 mm min. workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for use: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well  ...

Edge banding machine Felder G480 The following units are available: Cutting, joining, flush milling, corner rounding, scraper blades, surface scraping blades Year of construction 2016 The machine is in top condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12