eco used for sale

Key data: 2600 kN

Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 24,000 in automatic mode Total number of operating hours: 29,433 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...

Key data: 1800 kN

Engel Victory 1060/180 Ecodrive / hybrid machine / operating hours: approx. 11,000 in automatic mode Year of construction: 2019 Injection unit: Screw diameter: 55 mm Injection weight: approx. 495 g Spray pressure: 2000 bar Dosing volume: 523 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 11,000 in automatic mode Total number of operating hours: 16,350 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Proportional ...

Key data: 800 kN

Engel e-victory 170/80 Ecodrive / production line with the robot Engel Viper 20 / hybrid machine Year of construction: 2017 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 22,581 h Euromap 67 Robot Interface Air Valves Hydraulic core pull x 2 Control with hot runners Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Parallel Movements  ...

Description: Precise, smooth-running standard drilling machine in a modern design. Many options included. - Emergency stop push button - Full engine protection - Spindle / base plate distance 529 mm - T-slot width 10 mm Drilling capacity in steel 14/15 mm Projection 180 mm Drilling stroke 70 mm Speed 420 - 2100 U / min Table 250 x 220 mm Distance drilling head - clamping surface max. 380 mm Total power requirement 0.5 / 1.0 / 400 kW / volt Column diameter 65 mm Tool holder MK 2 Machine weight approx. 0.08 t Dimensions L x W x H 0.4 x 0.5 x 0.9 m Approx. Onsite Dimension. (l x w x h): 400 x 500 x 900 mm, weight approx.: 80 kg

Description: Miter cuts up to 60 ° left -saw speed 35/70 m / min. -Spannstock With quick set device -Sägebandführung Carbide -Bandspannungskontrolle -Elektr. Refrigeratory automation Auto-Cut system = 3-stage system -Auto Saw frame lowering using the hydraulic cylinder -Infinitely adjustable feed -With limit -Schnellgang Lowering of the saw frame from the rest position to the workpiece, then switch over to normal saw feed -Manual mode Cutting diameter 220 mm Saw band 2455 mm Table height 850 mm Cutting width 230 mm Cutting speed 35 + 70 m / min Saw-band 2455 x 27 x 0.9 mm Cutting capacity at 60 ° 90 mm Cutting capacity at 60 ° square 90 mm Cutting capacity at 60 ° flat 90 x 100 mm Cutting capacity at 45 ° round 150 Cutting capacity at 45 ° square 150 Cutting capacity at 45 ° square 150 x 210 Cutting Capacity at 90 ° 220 mm round Cutting capacity at 90 ° square 210 mm Cutting c ...

Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM-tipped circular saw blades. Accesories: Total enclosure,, Hollow face grinding device,, Motorized adjustment of the rake and clearance angles,, Automatic central lubrication,, Grinding mist extractor with multi-stage filter,, Machine lamp,, 1 sawblade holder,, 1 grinding wheel mount., Circular saw blade diameter: 80-810mm, Circular Saw Bore Diameter: from 10 mm, blade thickness: up to 8 mm, Tooth pitch: 6 -120mm, rake angle: - 30° to +50°, clearance angle: 5° to 45°, tooth height difference: any, Bevel cut on the back of the tooth: up to 45 °, Working speed: up to 20 teeth / min., Grinding wheel diameter: 32 mm, Connected load: 4kW (400V / 50Hz), Weight approx.: 1110 kg, Dimensions W x D x H =: 1860 x 1267 x 1970 mm, colour: Gray

Injection moulding machine R12, manufacturer: ENGEL, type: victory 140 ecodrive 330H/200V/140 combi, year of manufacture: 2018, read operating hours (h): 12,005, serial number: 225 448, weight of the machine: 10,300 kg, clamping force hydraulic: 1,400 KN, max. plate spacing: 1,200 mm, mould height: min. 600 mm, ejection force: 61 KN, ejection distance: 150 mm, ejector length: for FoBoha turntable 74 mm, number of hydraulic core pulls: 5, electrical power heating/motor: 16/30 kW, spraying volume: 56/35,6/34 cm³, spec. Injection pressure: 2,400/2,400/2,400 bar, auger: 22/18u/18o mm, radius nozzle: 15, incl. turntable FOBOHA, + 2 spray sets diameter 20/30 mm, + item 1634: 1 Handling SEPRO Multi Inject 20, year of manufacture: 2018, serial no.: R 006 187-01, incl. barrier fence

Injection moulding machine R14, manufacturer: ENGEL, type: victory 140 ecodrive inside 330H/200V/140 combi, year of manufacture: 2019, read operating hours (h): 17,415, serial number: 228 874, weight: 11,200 kg, clamping force hydraulic: 1,400 KN, max. plate spacing: 1,200 mm, mould height: min. 600 mm, ejection force: 61 KN, ejection distance: 150 mm, ejector length: with FoBoha turntable 74 mm, number of hydraulic core pulls: 5, electrical power heating/motor: 16/30 kW, Spray volume: 113/69 cm³, spec. Spray pressure: 2,400/2,400 bar, auger: 30/25 mm, radius nozzle: 15, with handling SEPRO Multi Inject 20, year of manufacture: 2019, serial no.: R 006 783-01, incl. turntable FOBOHA and barrier fence, + 1 turntable WEBER

Injection moulding machine R15, manufacturer: ENGEL, type: victory 140 ecodrive inside 330H/200V/140 combi, year of manufacture: 2019, reading operating hours (h): 6,560, serial number: 228 875, weight of the machine: 11,200 kg, clamping force hydraulic: 1,400 KN, max. plate spacing: 1,200 mm, mould height: min. 600 mm, ejection force: 61 KN, ejection distance: 150 mm, ejector length: for FoBoha turntable 74 mm, number of hydraulic core pulls: 5, electrical power heating/motor: 16/30 kW, spraying volume: 56/35,6/34 cm³, spec. Spray pressure: 2,400/2,400/2,400 bar, auger: 22/18u/18o mm, radius nozzle: 15, with handling SEPRO MI-20, year of manufacture: 2019, serial no.: R 006 783-02, incl. barrier fence, + 2 spray sets diameter 25/30 mm

cutting diameter: 345 mm dimensions of saw-band: 4780 x 32(34) x 1,1 mm cutting width: s. Abbildung mm coolant pump: Typ 2C0P1-14H coolant capacity: 50 dm³ output: 2,6 angle adjustable from - to: -45 bis +60 Grad weight of the machine ca.: 630 kg dimensions: ca. 2400 x 845 x 1430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: horizontal floory type boring machine Spindle diameter 125 mm x-travel 5600 mm y-travel 1600 mm z-travel 800 mm Spindle stroke 600 mm Spindle mount ISO 50 Spindle speeds 12 - 3000 rpm Spindle motor 40 kW Rapid traverse speed 15 m/min with CNC HEIDENHAIN iTNC 530 modernized in 2003 Tool changer 60 times Drilling work table RÜCKLE 2000 x 1800 mm max. 20 tons. workpiece weight Clamping plates 3500 x 2000 mm, 2500 x 2000 mm Coolant device z-motion: 800 mm, spindle diameter: 125 mm, x-motion: 5,600 mm, y-motion: 1,600 mm, control: CNC Heidenhain iTNC 530 modernisiert in 2003, table surface area l x w : 2000x1800 mm, spindle taper: ISO 50, turning speed range: 12-3000 rpm, total power requirement: 65 kW, weight approx.: 60,000 kg, Approx. Onsite Dimension. (l x w x h): 12,100 x 4,800 x 3,900 mm

Description: Max. machining width 1000 mm Min. machining thickness 3 mm Tipologia Sanding and Finishing Working Table Fixed pass height No. Operating units 2 Nr Max. machining width 1000 mm Min. machining thickness 3 mm Max. machining thickness 180 mm Work table yes Forward feed belt yes max. forward feed speed 25 m/min Motor power 1.2 KW Operating units 2 OPERATING UNITS 1 Unit : Combination Roller-Rad unit : rubber roller OPERATING UNITS 2 Unit : pad Pad : vertical , Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: • 4-axis CNC machining centre • Serial number 521/0-511 5004757 • Total installed power approx. 18 KW • Useful working area approx. 2600 x 1150 mm • Maximum workpiece thickness approx. 100 mm • Maximum travel speed in the axes direction x-y-z-c: 75-75-30-60 m/min • C-Axis • Tool magazine with 6 positions •  ,OMLAT electrospindle: power 6 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder • Swiveling saw unit with 1.50 KW motor • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • SIEMENS SINUMERIK numerical control • Remote control panel • 6 consoles with 14 vacuum suction in total • 4 lifting modules for heavy workpieces • NASH_ELMO 2BL2041-2AH50-4A-Z  ...

Description: • 4-axis CNC machining centre • Serial number 471/0-502 5001956 • Total installed power approx. 18 KW • Useful working area approx. 2600 x 1150 mm • Maximum workpiece thickness approx. 100 mm • Maximum travel speed in the axes direction x-y-z-c: 75-75-30-60 m/min • C-Axis • Tool magazine with 12 positions •  ,Electrospindle: power 6 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder • Swiveling saw unit with 1.50 KW motor • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • SIEMENS SINUMERIK numerical control • Remote control panel • 6 consoles with 14 vacuum suction in total • 6 lifting modules for heavy workpieces • BECKER HOLZHER VP100 vacuum pump A ...

Description: 24 filter media FPA ,160 x 1000 max. volume flow 8000 m³/h Nominal volume 7300 m³/h Motor 15 kW Voltage 400 V CE certificate and electronic operating instructions available suitable for edge banding machine IMA Approx. Onsite Dimension. (l x w x h): 3,800 x 1,200 x 2,400 mm, weight approx.: 1.200 kg

turning diameter: 200 mm turning length: 400 mm control: FANUC, 0i-TC swing diameter: 330 mm spindle bore: 68 mm x-travel: 160 mm z-travel: 450 mm spindle turning speed range: 5000 U/min C-axis resolution: 0,001 ° tool turret: 1 x 12 Pos number of driven tool stations: 6 tool taper: VDI 30 speed of driven tools: 4500 U/min total power requirement: 16,5 kW weight of the machine ca.: 3,2 t Accessories: hydr. 3-jaw chuck 200 mmø, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview The blow moulder was built in 2011 by French manufacturer SIDEL. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details        Working hours: 37.289 h Capacity Max. 32.000 bph Recently produced at 25.600 bph at 2.0L Number of moulds: 16 hot or cold molds Molds: Hot molds up to 75°C, or standard Equipped with quick change Oven type: Sidel Universal Eco2 C3 special filters Number of heating modules: 20 modules Neck personalization: 38 mm Machine was regularily maintained                           Machine equipped with:                     Sidel preforms tipper Sidel preforms hopper & feeder AGR preforms disinfection Sidel Predis Ultra Clean Vulcanic water/oil thermoregulator Sidel electrical cabinet Sidel control panel Sidel PCC

Bread cutter Wabäma Model: Allround Economy Plus 380.200 max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machinery on the move Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine cleaned Many more bread slicers in stock!

sheet width: 3050 mm plate thickness: 16,00 mm distance between columns: mm cutting gap: 0,05 mm cutting angle adjustment: 1,4 ° quantity of oil: 400 l total power requirement: 22 kW weight of the machine ca.: 9,20 t dimensions of the machine ca.: m Cutting edges 2/4 – top/bottom Cutting angle adjustable 1-4° Cutting gap fixed at 0.05mm Dimensions approx. L 4.40 x W 2.15 (plus support arms) x H 2.20 m • Controlled backgauge 1000 mm • ELGO P8721 control • Automatic cutting angle adjustment • Foldable finger protection 1000 mm • Angle stop • Support arms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in bakery condition and is in our warehouse

Description: printed pages: 50.000-80.000 toner: 30-60% laser printer type: B/W resolution: 1.200 x 1.200 dpi  , functions: print scan copy  , speed: up to 40 pages/minute RAM: 1024 MB interfaces: USB 2.0 USB-Host for USB-Flash-Memory slot for optional interface or hard drive slot for optional SD / SDHC card duplex touchscreen  , please also have a look at PDF file of this device Approx. Onsite Dimension. (l x w x h): 800 x 600 x 600 mm, weight approx.: 20 kg

CONTROLS   PLC OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min CROP SHEAR   sheet thickness max.: 4 mm   working width max.: 530 mm   stroke rate (max.): 20 /min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 ...

CNC controller: Mitsubishi MSX-853IV Axes X-axis travel mm: 635 Y-axis travel mm: 510 Z-axis travel mm: 460 Worktable Table dimensions mm: 790 x 560 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 8.000 Spindle drive power kW: 12 Tool system Tool holder: BT40 Tool magazine slots: 20 Equipment Chip conveyor various rigid tools Machine running times Under power: 30.116 Spindle Working: 14.813 Basic machine dimensions / weight Weight kg: 3.700

1230pcs LOKITEC Oil Radiator Electric Heater  This batch of high-quality electric oil radiators from LOKITEC provides an efficient and comfortable heating solution for various living and working areas. With an impressive wattage and a host of smart features, these radiators provide pleasant warmth and maximum comfort. Certifications: All oil radiators are CE, ROHS and CB certified, which ensures their safety and quality in accordance with international standards. Offering an outstanding combination of performance, efficiency and comfort, these oil radiators are ideal for use in a variety of environments. With their robust construction and numerous features, they are a reliable heating solution for cold winter days. Quantity: 1230 pieces  New RRP total € 190,510 Unit price 18,00 € net Transportation can be arranged by us.  Specifications and features: 1. LOKITE ...

Description: Attention: Final weight and dimensions are given during transportation. Photos are exemplary, not all objects shown are part of the article. Basic information about the system: The manufacturer WITTE is the market leader in the field of high-precision clamping and fixture systems. , The Alufix (AF) system is a clamping system that can be assembled according to a modular principle. The components are made of the material Alufix Light. This is a high-strength aluminum which makes it possible to produce very long components with a low weight. , The profiles are not simply bar profiles (as with similar products on the market) but are machined all the way round. Some of the products contain hard chrome-plated or anodized surfaces. , Item consists of the following content: Cuboid: Cuboid AF40 Light Classic / Eco, three rows (120x120x2000 mm) (23578) (quantity: 2)  ...

Cool Compact Magnos 650 Refrigerator with Glass Door  Versatile convection refrigerator  excellent for commercial kitchens, restaurants, butchers, bakeries Cool Compact Refrigerator Magnos 650 with Glass Door suitable for use with GN 2/1 containers (grid size 530 x 650) with convection cooling and electronic control inside/outside CNS 18/10 ( also back wall, bottom and cover plate ) Warning by visual and acoustic signal Compressor Protection Function suitable for the tropics - suitable for ambient temperatures up to 43ºC Automatic evaporation of condensation by hot gas Cooling body made of one piece high-pressure foamed self-closing and lockable door, door hinge on the right Evaporator-free interior Drawers with telescopic full-extension extensions made of stainless steel 1.4509 Very stable drawer guide: loadable up to 60 kg Electronic control with 4 top performanc ...

brand new diesel petrol tank system comprising petrol station fuel tank fuel tank tank system home service station storage tank storage tanks Court gas station steel tank: 1. 10,000-litre tank according to DIN 6616/D, above ground, double-walled 1 pump type eco 55 description containers: New tank, 10,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. (Other sizes from 1,000 to 100,000 liters are available on request) The tank has two saddle feet, a manhole with domed lid and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fl ...

We offer the following positions: Doka Eurex, used, in stock at top conditions – checked and sorted 101 x used Doka Eurex 20 eco 250 for the absolute special price of 22,00€/piece 3 x stacking rack 1.55 x 0.85m, used 99,00€/pcs. 217 x used Doka Eurex 20 top 250 for the absolute special price of 24,00€/piece 6 x stacking rack 1.55 x 0.85m, used 99,00€/pcs. 83 x used Doka Eurex 20 top 300 for the absolute special price of 26,00€/piece 2 x stacking rack 1.55 x 0.85m, used 99,00€/pcs. Doka Eurex, used, in stock at top conditions – checked and sorted to be sold on behalf of a customer! 22 x used Doka Eurex 20 eco 350 for the absolute special price of 28,00€/piece 1 x stacking rack 1,55 x 0,85m, used 99,00€/pcs. 297 x used Doka Eurex 20 top 350 for the absolute special price of 32,00€/piece 8 x stacking rack 1.55 x 0.85m, used 99,00€/pcs.  ...

Diesel tank system - company filling station - consisting of: 1 x Storage container, 10.000 liter capacity, used 1 x fuel pump, type Eco 75, brand new Description container: according to DIN 6616-D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome cover, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is reprimed and painted on the outside. (RAL sound). L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex wo ...

Diesel filling station - Home filling station - Gas station - Small filling station composed of: 1 x 20m³ storage container - brand new 1 x fuel dispenser type eco 75 - brand new Description steel tank: 20,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight app ...

Digital ECO Solvent roll printer Make WitColor Model Ultra 9100 3302S Year 2018 Maximum width 3200 mm Meter per minute up to 50 meter per hour Print heads 2 x Epson DX5 print heads Ink type ECO Solvent Substrates prints on films, vinyl, and many other flexible materials Available Direct

Electric motor, three-phase motor -Condition: unused -Power: 5.5 KW -Speed: 2840 rpm -Shaft: Ø 28 mm -Design: B3/B5 -Protection rating: IP 54 -Flange recess: 180 mm -Flange hole circle: 215 mm -Flange outside diameter: 250 mm -Foot holes: 190 x 140 mm -Price per piece -Pieces: 23x available AEG -Pieces: 18x available ECO Air -Piece: 25x available ECO Air without fan wheel -Dimensions: 370/270/H250 mm -Weight: 30kg

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...

Tanks fuel tank fuel tank storage tanks 5 cbm TAnkstelle diesel tank Gas station fuel tank tank tank heating oil tank storage tank 5,000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube, 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.70 m + console / D = 1.60 m / weight CA. 1.6 tons. / free charged ex works. On the tank, a pump / nozzle pump is installed on customer's request,  ...

Verpackungskodierer Manufacturer: Willett Type: 3170 For the product eco-labelling, coding of packaging and cardboard boxes. In good condition!

Power: 450 kVA / 320 KW Diesel engine (four-stroke) / type / Nr.: IVECO Aifo / 8281 SRi 27 / 831544 Cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: Mecc Alte / ECO 40-S2/4 / 0000949465 Voltage: 400/231V Frequency: 50 Hz Speed: 1500/min-1 Type: 20' soundproofed container Tank: 400 ltr. Day tank + external diesel supply option / Starter: Kuhse KEA 101 SPL Battery voltage / capacity: 24 V Generator switch: Yes Power switch: Yes Automatic. Yes Accessories: -. Dimensions (L X W X H): Approx. 6058 x 2438 x 2591 mm Weight: Approximately 7800 kg (excluding diesel)

complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum  ...

Power: 50 kVA / 40 KW diesel engine (four-stroke) / type / Nr: Deutz / BF 4 M 2012/ 11207641 cylinder: 4 in line Cooling: Water-cooled Generator / type / Nr.: Mecc Alte / ECO 32-1 L/4 / 0001694265 Voltage: 400 V / 231 V Frequency: 50 Hz Speed: 1,500 min-1 Type: Motor and generator separately, without base frame Tank: - Switchgear / Starter:-/ electric battery voltage / capacity: 12 V / 110 Ah Generator switch: - Power switch: - Automatic: - Accessories: - Dimensions (L X W X H): Engine: 1280 x 620 x 1000 mm, Generator: 840 x 390 x 490 mm Weight: Engine: approx. 390 kg, generator: approx. 248 kg

5,000 litre storage containers According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.80 m / D = 1.60 m / weight CA. 1.3 tons. / free charged ex works. Description PTO pump: Non calibratable type eco-box-55- Capacity up to approx. 55 l / min. suitable for diesel fuel, incl. -Automated fuel dispenser with PC softwa ...

FUJI PROOFGERAET PICTROSTAT 400 D Built in 2001 Manual is available. Inks and papers are also available The former Nettoneupreis DM 63.900,00 General Fujifilm Pictrostat 400 d With the 400 d Fujifilm Pictrostat, Fujifilm presents its digital full color copier for prints up to format DIN A3. By combining the functions of the High-performance digital printer Pictrography and the copying of his little brother Pictrostat 300 Pictrostat 400 d was launched very successfully in the German market. As also the Pictrography, Pictrostat 400 d with the Thermoentwicklungs-works and -transfer process, which completely without chemicals comes out and basically like a Image separation works. Only water, light, heat, pressure, become the processing Need photo paper and the donor paper developed by Fujifilm. This eco-friendly Method to produce prints in photo quality has ...

Chiller chiller Uniflair Type: ARAF1204A Cooling capacity: 276 kW 4 x compressor performer scroll type: SZ 300 Shell-and-tube heat exchange Refrigerant: Freon R407 2 circles Freecooling Dimensions : 5242 mm x 1344mm x 2140mm In very good condition Number in stock: 1 piece, Price on request, We have other used refrigeretion equipment like: BITZER, Copeland, Frascold, Lunite, Kueba, Guentner, eco, Alfa-Laval, Goedhart, Helpman

New machine 24-month warranty Benefits: + TOP value for money + ideal for semi-professional baker + manual, compact table roll-out machine with robust hand crank / folding handle + Eco-model, maintenance-free as no motor + suitable for all types of dough for rolling out and touring + Steel rollers and scrapers in high quality + without conveyor belts, instead with stainless steel trays + Trays can be folded up on the left and right + Scrapers can be easily removed without tools + rolls out up to 3.5 kg of dough + fast spare parts supply within 1-2 business days Technical data: - Roll-out width: 520 mm - Table length: 485 mm = 970 mm each - Roller adjustment: from 1 mm to 50 mm (depending on the product) - Dimensions: --- working position: 1050 x 845 x 500 mm (WxDxH) --- rest: 410 x 845 x 858 mm (WxDxH) - Net weight: 60 kg

Condenser GUENTNER Type: S GVH 080.1A/2x5 L(S) Cooling capacity: 673.4 kW Air volume flow: 151 000 m3/h Number of fans: 10 x 800 mm Dimensions: 10000 mm x 2300 mm x 1800 mm Volume: 300.3 l Number of pieces in stock: 2 Reference number: SK13 Condition : Used in good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Condenser GUENTNER Type: GVH 090.1A/3-N(D) Cooling capacity: 305.5 kW Air volume flow: 89 400 m3/h Number of fans: 3 x 900 mm Dimensions: 6600 mm x 1140 mm x 1500 mm Volume: 89.2 l Number of pieces in stock: 1 Reference number: SK17 Condition : Used in good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Composite equipment Bitzer with original condenser Freezer / normal cooling -4x compressor Bitzer 6F-40.2Y -Cooling capacity: 330 kW at -10oC/40oC, 180 kW at -25oC/40oC, 100 kW at -35oC/40oC -Volume: 4 x 151.6 m3 -Number of pieces in stock: 2 pieces -Refrigerant: Freon -With original condenser -In very good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Compressor Bitzer Type: HSK6461-40 Volume: 165 m3/h Cooling capacity: 57kW at -10ºC/40ºC R134a Number of pieces in stock: 1 Reference number: S2 Condition : Used in good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Service station - Hoftankstelle - Diesel filling station with 5,000 litres capacity, brand new, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings Equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue.  ...

Wexiödisk WD-100GR Granulate Dishwasher The WD-100GR is a granulate pot washing machine that can wash with or without granules. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a continuous model for simplified logistics and improved ergonomics and hygiene. It is also equipped with efficient centrifugal wheel technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW condensing device No pre-washing or scrubbing by hand thanks to vigorous washing with water and granules Great hygiene and fast drying with centrifugal cycles Heat recovery and a condensation battery reduce the steam in the room Complete dishwashing system with loading table and trolley Easy maintenance - can be done from the front or from the side Effective dishwashing and high capacity with double dishwashing sy ...

Grinding diameter: 500 mm Grinding length: 1000 mm Workpiece weight: 0 kg CNC Brand: Fanuc CNC Model: 21 i-T MACH-id     512 MAKE          Studer TYPE            eco 1000 YOP              2003 SPECIFICATIONS Control        Fanuc 21 i-T Cylindical / Surface / Other         Cylindrical Grinding diameter Ø      350 mm Grinding length        1000 mm Grinding wheel size       500 x 80 x 127 mm Spindle speeds / ranges      2600 Rpm DIMENSIONS Length    4800 mm Width     2500 mm Height     2300 mm

Vacuum filler Handtmann Type: VF 610 Hopper capacity: 40 x 100 (liters) Filling capacity: 3000 kg / h Stuffing pressure: 35/50 bar Porting speed: portions size 25 - 450 portions / min portions size 50 - 375 servings / min portions size 100 - 280 servings / min portions size 200 - 190 servings / min Power: 3.5 kW Weight: 475 kg net External dimensions: 120 x 122 x 204 cm Year of production: 2006 The stuffer can work with all popular types of casings: natural casings, collagen Clipper Poly-Clip Type: PDC 700 For calibers with a diameter of: 30-115 mm For all covers: Plastic, fibrous, collagen and natural Mobile machine: on a trolley We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman