We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,241 used machines on RESALE, but how to find them? Machine Search
used
Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
used
Used Mechanical Press MOSSINI 200 ton equipped with electronic feeder and decoiler dimension table 1400 x 750 mm dimension slide 900 x 650 mm stroke min/max 4-180 mm stroke par minute 20-50 spm electroni Feeder 400 x 2 mm model RNM - CE Marked
used
Complete drive 22 kW, 182,5 RPM Gearbox 04/2022 Motor 04/2004
used
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
used
Description: Machine number: 0031288 Operating voltage: 380 V Connection: 5.5 kW Pressing force: 1000 kN Projection: 300 mm Ram strokes: 100/min Adjustable ram: 60 mm Adjustable stroke: 10 - 100 mm Table dimensions: 900 x 590 mm Attention: the clamping tool located on the table top weight approx.: 5,700 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,500 mm
used
Specifications: Capacity 40 tons 2 strokes 57 + 86 H/min Projection 250 mm Plunger stroke 8 - 88 mm Plunger adjustment approx. 63 mm Table , WxD approx. 570 x 450 mm Max. installation height approx. 330 mm
used
Description: Stroke of the ram: 8 - 58 mm Pressing force: 10 to Flywheel: 125 rpm Table dimensions: 320 x 320 mm Hole diameter: approx. 85 mm weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,800 mm
used
heavy press with casting stand
used
Inv. Num. : 5696 Type: LE 160 Producer: Východoslovenské Strojárne Košice Created: 1977 Parameters: Compressive force: 160 t Maximum stroke rate per minute: 45 1/min Stroke: 20-120 mm Plunger adjustment: 100 mm Machine weight: 8700 kg
used
Description: Machine number 8758 , Ram adjustment 85 mm , Ram strokes 60/min Voltage 380 V Max. pressing force: 100 to, stroke: 20 bis 110 mm, table surface area l x w : 900x700 mm, total power requirement: 7,5 kW, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,500 x 2,800 mm
used
Description: Machine number 6360290 Ram strokes 120/min Ram adjustment 55 mm Max. pressing force: 45 to, stroke: 4 bis 80 mm, throat: 230 mm, table surface area l x w : 690x460 mm, total power requirement: 3 kW, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 200 mm
used
Description: Fabrication number: 10566 Compressive force: Norm.25000 kg Ram stroke: H20 - 160 mm Ram adjustment: 120 mm Stroke rate: 40 rpm Working stroke: h 30° vUT 11 mm Working capacity: 2660 mm T Dimensions of the lower worktop: approx. 1100 x 780 mm Dimensions of the upper worktop: approx. 940 x 400 mm weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,200 x 3,000 mm
used
Description: Lower tabletop dimensions: approx. 720 x 720 mm Upper tabletop dimensions: approx. 570 x 560 mm Pressing force: approx. 150 to weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,350 x 1,600 x 3,200 mm
used
Description: Delivery date: 28.9.62 Pressing force: 40 t Largest sheet thickness: 4 mm Stroke number: 130/min Ram stroke: 8 - 88 mm Ram adjustment: 63 mm Largest distance between table and ram with max. stroke at bottom, adjustment at top, table at the bottom: 400 mm Smallest distance between table and ram with max. stroke at bottom, adjustment at top, table at top: 160 mm Lower worktop dimensions: approx. 550 x 440 mm Upper worktop dimensions: approx. 350 x 230 mm With safety screen weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 1,600 x 2,400 mm
used
Description: Machine number: 1041255 Pressure capacity: 60000 kg Projection: 280 mm Ram strokes: 100 min Stroke adjustable: 10 - 90 mm Motor power: 4 hp Lower table top dimensions: approx. 750 x 590 mm Upper tabletop dimensions: approx. 300 x 200 mm weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,200 x 2,250 mm
used
Description: Delivery date: 17.01.1963 Order number: 138/62 Pressing force: 60 t Largest sheet thickness: 10 mm Stroke number: 65/min Ram stroke: 6 - 120 mm Lower table top dimensions: 700 x 400 mm Upper plate dimensions: 240 x 240 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,400 x 2,200 mm
used
Description: Largest working pressure: 63 t Cutting surface, ks = 40 kg/mm²: 1600 mm² Projection: 250 mm Stroke of the ram: 20 - 120 mm Ram clearances: 55/min Motor: 3/1500 kW/N Lower tabletop dimensions: approx. 790 x 500 mm Upper tabletop dimensions: approx. 400 x 370 mm weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 2,500 mm
used
Description: Serial number: PN63/250 69/32.0458/2 Press force: 63 t Ram stroke: 8 - 100 mm Stroke number: 140/min Lower table top dimensions: approx. 720 x 500 mm Upper table top dimensions: approx. 450 x 280 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 2,500 mm
used
Description: Machine number: 978570 Pressure capacity: 45000 kg Projection: 220 mm Ram strokes: 110/min Adjustable ram: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 4 HP Lower plate dimensions: approx. 690 x 460 mm Upper plate dimensions: approx. 360 x 200 mm weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,200 mm
used
Description: Serial number: P5076870 Pressing force: 15 to For further technical data see type plate With press protection grid Manufacturer: LEINHAAS weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm
used
Description: Press force: 35 to Number of strokes: 80 - 300 Stroke: 6 - 50 Ram adjustment: 50 Table dimensions: 540 x 340 mm Hole diameter: approx. 125 mm weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 2,200 mm
used
Description: closing height: ,250 mm table plate thickness: ,100 mm slide adjustment: ,80 mm bottom table dimensions: ,900 x 560 mm upper table dimensions: ,560 - 360 mm speed: ,40 g/min damaged upper table  , please also have a look at the videos of this machine table surface area l x w : 900 x 560 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,300 x 2,900 mm
used
Description: SPECIFICATIONS Feature: Erfurt Type: PR160/315 Capacity: 160 T Table length: 800 mm Table width: 550 mm Air coupling: Yes 2-Hand protection: Yes Unloading: 300 mm Number of slugs: 50 p/min Electrically adjustable slug: 100 mm weight approx.: 14,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 3,200 x 3,100 mm
used
Description: Pressure normal 25 t Stroke adjustment 4 to 80 mm Ram adjustment 70 mm Stroke rate 130/min Power requirement 1.5 hp Without built-in tool! weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 1,700 mm
used
Description: press power: 63 t table dimensions L×W: 700x550 mm table opening LxW: 265X265 mm presser LxW: 320x300 mm presser stroke: 130 mm (fixed) max distance of the presser from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 pneumatic components: FESTO commands: single (foot-shoe, two-handed-lever), continuous (automatic mode-setting time interval 1-99999s and number of repetitions 1-32000) a special function for determining the lower position of the presser automatic lubrication of the machine pneumatic triggering and braking Max. pressing force: 63 to, stroke: 130 mm, table surface area l x w : 700x550 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 2,500 mm
used
Key data: 45 t
45 to VAT not identifiable Please inquire with the place of postcode and whether there is an unloading possibility. More pictures on request .
used
Description: Machine number: 4717 Feed size: 500 x 3 mm Belt infeed height (with plate): 170 - 270 mm Additional device: 2-hand operation Table size: 1250 x 900 mm Plunger surface (blue): 800 x 600 mm Projection of ram center dimension stand: 510 mm Installation height center dimension (without plate): 500 mm Clamping plate thickness: 125 mm Trunnion Ø: 65 mm Smallest / largest stroke: 27 - 140 mm Number of strokes: 48 With electronic roller feed: Wanzke WVS 500 Indramat control system, serial no. 102414-1, year of manufacture 1998 With reel straightener: PBK RMC4 80/7/50 RSD GLST, serial no. BA00967, year of manufacture 2006 With minimum quantity lubrication: , Schmidt System 2000 Max. pressing force: 250 to, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 2,250 x 3,200 x 3,500 mm
used
Description: Serial no.: 058-005/9 Nominal force: 160 Np Operating pressure: 144 kg/cm² Plunger stroke: 500 mm Projection: 380 mm Maximum distance between table and ram: 800 mm Downward speed: 200 mm/s Trunnion Ø: 40 mm Installation height: 300 - 800 Upwards speed: 250 mm/s Table size: 900 x 630 mm Plunger surface: 530 x 400 With deep-drawing device under the worktop Additional equipment: 2-hand operation, additional ram 250 x 200 Caution: Stand cracked and secured with frame. Max. pressing force: 160 to, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 3,600 mm
used
Description: Machine number: 12965 Printing capacity: 250000 kg Feed size: 300 x 5 mm Belt infeed height (with plate): 125 - 315 mm Additional device: 2-hand operation Projection: 450 mm Installation height center dimension (without plate): 350 mm Clamping plate thickness: 110 mm Trunnion Ø: 65 mm Plunger strokes: 35 min. Adjustable ram: 80 mm Stroke adjustable: 20 - 140 mm Motor power: 20 HP Voltage: 380 V Lower table top dimensions: approx. 1200 x 850 mm Upper table top dimensions: approx. 750 x 330 mm With electronic roller feed: Dreher WAV-RDS-2E 1160B, serial no. 940059, year of manufacture 1994, feed 300 x 3 mm With reel straightening machine combination: BBT ABH 1100 / BRM 300, year of manufacture 2019, feed 300 x 3 mm With minimum quantity lubrication: Schmidt weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,210 x 3,000 mm
used
Description: Press force: 12 t Max. stroke: 60 mm Stroke: 6 - 60 mm weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 900 x 900 x 2,000 mm
used
Description: 1x construction year 1971 1x year of construction 1979 Number of strokes: 125 Tappet adjustable: 60 mm Incl. inclined roller conveyor Max. pressing force: 45 to, stroke: 15 - 75 mm, throat: 250 mm, total power requirement: 2.2 kW, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,800 x 2,100 mm
used
Description: Number of strokes: 32 - 50 s/min Stroke adjustment: 100 mm ITB WV 300/62 tire straightening device (bj 2005) Control: Rexroth Indramat SYSTEM200 / BTV04 Max. pressing force: 160 to, stroke: 25 - 160 mm, throat: 355 mm, table surface area l x w : 1000x740 mm, weight approx.: 13,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 2,400 x 3,350 mm
used
Compressive force: 80 t Projection: 350 mm Table size: 700 x 720 mm Diarrhoea level in table: 160 mm Plunger area: 300 x 445 mm Plunger adjustment: approx. 80 mm Stroke adjustment: 8 - 100 mm Stroke rate: approx. 90 rpm Drive motor: 380 V, approx. 5 kW Dimensions: 2050 x 1100 x 2450 mm Weight: approx. 3800 kg
used
Description: Exhaust: Ø200 mm Max. pressing force: 70 to, stroke: 112 mm, throat: 275 mm, table surface area l x w : 850x550 mm, total power requirement: 55 kW, weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 2,300 mm
used
Compressive force: 63 t Projection: 250 mm Table size: 500 x 710 mm Diarrhoea hole in the table: approx. 250 mm Plunger area: 280 x 450 mm Plunger adjustment: approx. 63 mm Stroke adjustment: approx. 8 - 100 mm Stroke rate: approx. 140 rpm Drive motor: 380 V, approx. 5 kW Dimensions: 1600 x 1500 x 2500 mm Weight: approx. 3500 kg
used
throat: 300 mm, table surface area l x w : 690x500 mm, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 2,300 mm
used
Article number: 13-20-001 Manufacturer: Schuler Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1965 L x W x H: approx. 1200x1800x2400 Weight: approx. 2500kg Compressive force: approx. 25000kg Stroke of ram: approx. 8-59mm Max. installation height: approx. 550-1150mm Power requirement: approx. 1.5 hp Other accessories on request Price and other technical data on request
used
Max. pressing force: 40 to, stroke: 80 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,000 x 2,100 mm
used
Description: - Control: conventional - Pressure: 125 t - Throat: 400 mm - Stroke: 6 - 160 mm - Total power requirement: 11 kW - Number of strokes: 60 Strokes/min - Installation height: 525 mm - Ram adjustment: 100 mm - Ram surface: 800 x 550 mm - Table surface: 1100 x 750 mm - Drain opening in Table: 400 mm - Stand passage: 740 weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 3,300 mm
used
Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.
used
Description: Machine number 5391187 Ram strokes 110/min Ram adjustment 60 mm Max. pressing force: 60 to, stroke: 10 bis 90 mm, throat: 280 mm, table surface area l x w : 750x530 mm, total power requirement: 3 kW, weight approx.: 3,650 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,600 x 2,200 mm
used
Description: Ram strokes 55/min Voltage 380 V Machine number 8695 Installation height 500 mm Max. pressing force: 130 to, stroke: 10 - 140 mm, throat: 350 mm, table surface area l x w : 980x700 mm, total power requirement: 11 kW, weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 2,400 mm
used
Description: Force: 80 tonnes Stroke: 14 - 110 mm 55 strokes per minute Power: 5.5 HP weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 2,450 mm
used
Description: Maximum force 25 TON Stroke 7 - 70 mm 128 strokes per minute Power 2 HP weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 800 x 1,000 x 2,000 mm
used
Offer 24163 Technical data approx.: - Compressive force 135 t - Projection 350 mm - Table size approx. 1000 x 680 mm - Through-hole in the table mm - Maximum installation height approx. 460 mm - Plunger area 350 x 280 mm - with lateral cantilever, left + right, 125 x 200 mm - Tenon hole in the ram 50 mm - Plunger adjustability 65 mm - Stroke adjustment 20 - 180 mm - Stroke rate approx. 50 /min - Movable shielding, retrofitted in 1991 - Pneum. Actuated rotary wedge coupling - Drive 400 V / 7.5 kW - Space requirement approx. W 1500 x H 2550 x D 1800 mm - Weight approx. 9000 kg
used
Inv. Num. : 7507 Type: 160 Producer: Rusko Generated: Parameters: Compressive force: 160 t
used
Description: Pressing force: 110t Year of construction: 1999 Stroke: 120mm Weight approx.: 7600kg Safety distance: 292mm Overtravel: 82mm Overrun time: 189 ms weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 2,000 x 3,000 mm
used
Description: Control type conventional Stroke rate: 56 / 84 1 / min Clearance between body walls: 320 mm Installation height (max. stroke at the top, stowage at the top): 415 mm Table surface: 710 x 500 mm Passage opening in the table: 320 mm Table height above floor: 800 mm Plunger surface: 450 x 280 mm Plunger adjustment: 63 mm Permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with friction clutch, mechanical overload protection in ram, inclineable Max. pressing force: 63 to, stroke: 8 - 100 mm, throat: 250 mm, table surface area l x w : 710 x 500 mm, weight approx.: 4,100 kg, Approx. Onsite Dimension. (l x w x h): 1,350 x 2,000 x 2,600 mm
used
pressure:40 t throat:220 mm stroke:8 / 88 mm table pass:ø- abgesetzt 225/200 mm ram head dimension:400 x 250 mm distance table/ram:228 mm stroke adjustable from - to:30 - 140 mm ram adjustment:63 mm thickness of bolster:80 mm no. of strokes:70 Hub/min total power requirement:5,5 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:1100 x 1300 x 2300 mm Documents:vorhanden
used
pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:56 / 84 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:710 x 500 mm hole in the table:320 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,1 t dimensions (W x D x H):1,35 x 2,0 x 2,6 m overload protection in ram:mechanical