136,774 used machines on RESALE, but how to find them? Machine Search
pressure: 63 t throat: 280 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 620x500 mm ram surface: 310x260 mm hole in the table: Ø 250 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1200x1900x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 400 t, 160 mm
Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.
Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T
Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton
Eccentric shaft by drawing K04.038.842-22-402 for hot stamping press K04.038.842 (K8542), 1600T brand new in state stale from stock W 4675 kg
Key data: 80 t, 400 mm, 112 mm
Printing capacity: 80 ton Table surface: 750 x 550 mm Plunger adjustment: 80 mm Stroke length: 8 - 112 mm Stroke rate: 78 p/min. Projection: 400 mm Equipped with: - Air coupling - Safety screen Country of origin: Germany Motor power: Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg
Inv. Num. : 8437 Type: 50-VE Producer: IMS Created: 2002 Parameters: Compressive force: 50 t Maximum stroke rate per minute: 145 1/min Stroke: 80 mm Adjusting the ram: 75 mm Machine weight: 2300 kg
Single-column eccentric press AMBOLD type PEEV 25.2Masch. No. 11734 / 02 Year of construction 2002Compressive force 25 ton. Projection 200 mmTable area 520 x 400 mmPlunger area 155 x 155 mmHole in table 185 x 155 mmStroke adjustment 4-80 mmPlunger adjustment 40 mmInstallation height max. 270 (largest stroke in UT, table below)Clamping pin hole 32 mmTable height adjustment approx. 150 mmPlunger strokes 160 strokes/min. Motor power 2.2 kWNet connection 400 volts, 50 Hz pneumatic clutch-brake combination
Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton
nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton
Inv. Num. : 8499 Type: PEKRS 160 Producer: IWK Created: 1970 Parameters: Table length: 2000 mm Table width: 1000 mm Maximum stroke rate per minute: 55 1/min Stroke: 8-180 mm Adjusting the ram: 110 mm
Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton
pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: PM1063, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 0,5 kW - 220/380 Volt - 670 rpm., Theoretical capacity: 1000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Mono, Type: MD 30
pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: PM1574, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 2,2 kW - 380/660 Volt - 1415 rpm., Theoretical capacity: 6000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: MH40 D8
Stock number: PM2076, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Inlet: Flange L 350 x W 180 mm., Motor: 1,5 kW - 220/380 Volt - 186 rpm., Theoretical capacity: 1000 l/h., Manufacturer: Seepex, Type: BT 2-12, Other: Screw feeding
Single column - eccentric press KRUPP type PEKRD 125 hMasch. No. 2861 Year of construction 1977Compressive force 125 ton. Projection 400 mmTable size 950 x 750 mmPlunger area 800 x 540 mmTable opening 100 x 250 mmStroke adjustment 8 to 160 mmPlunger adjustment 100 mmInstallation height largest stroke at the top max. 550 mmStroke rate 60 strokes/min. Table height above floor 800 mmEngine power 10 kWNetz connection 380 Volt, 50 Hz- Hydraulic overload in the plunger- Compressed air clutch-brake combination ORTLINGHAUS-
pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Eccentric punching machine HAULICK + ROOS type RVD 125Double column - Eccentric pressMasch. No. 212560 Year of construction 1981Compressive force 125 ton. Table size 880 x 800 mmTable opening 470 x 140 mmStand width 900 mmStand width laterally 415 mmRam stroke 45 mmRam adjustment range 0-80 mmInstallation height in the picture 340 mmStroke rate 50 to 300 strokes/min. Engine power main drive 22 kWNe-connection 380 Volt, 50 Hz- Double connecting rod engine with 4-bearing eccentric shaft for off-center tappet pressure
Single-column eccentric press HELMERDING type TPEP 12 BMasch. No. 831-101 Comm. No. 76228 Year of construction 1976Compressive force 12 ton. Projection 155 mmTable surface 400 x 320 mmTable opening 125 mmPlunger area 125 x 100 mmLifting adjustment 6-60 mmRam adjustment range 40 mmClamping pin hole 25 mm with clamping pieceInstallation height max. 250 mmStroke rate 180 strokes/min. Drive power 1.1kW- Electric foot switch and 2-hand operation- Setup, single stroke 2-hand, single stroke foot and continuous running foot, automatic
Nominal pressing force ... 100t Table dimensions ... 1000 x 640mm Stroke adjustment ... 125mm Plunger adjustment ... 90mm Number of rams ... 75-150 rpm Main engine power ... 6/10kW L x W x H ... 1725 x 2230 x 2970mm Mechanical weight ... 10100kg
pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(), 30kW - Japanese standard Pgsc N D D Hou Dxb Tjxop Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.
pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 200 mm stroke: 0 - 50 mm table:: 360 x 550 mm table:: 140 mm - Bohrung no. of strokes: 160 Hub/min bore: 35,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 240 mm total power requirement: 2,2 kW weight: 1.250 kg range L-W-H: 1310 x 1250 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton
pressure: 63 t throat: 260 mm stroke: 8-100 mm ram - range of adjustment: 63 mm no. of strokes: 115 Hub/min : 316 mm table surface area: 630x490 mm ram surface: 315x260 mm hole in the table: Ø 140 mm total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 t throat: 310 mm stroke: 30-120 mm no. of strokes: 20-60 Hub/min ram - range of adjustment: 90 mm table surface area: 820x600 mm ram surface: 550x430 mm hole in the table: 330x200 mm table height: 750 mm tool hole in ram: Ø50 mm weight of the machine ca.: 9,5 t dimensions of the machine ca.: BxTxH 2500x2500x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Eccentric screw pump with 19 m³/h capacity Description: Operating pressure test: 6 bar Motor: 7.5 kW - With connections: suction side: flange DN 85, Print side: DN 100 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1200 mm Width: 410 mm Height: 1000 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.
- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm
pressure: 35 t throat: 240 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x450 mm ram surface: 360x180 mm hole in the table: 220x130 mm table height: 630 mm tool hole in ram: Ø35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: BxTxH 1500x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 375 mm stroke: 20-125 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm table surface area: 920x660 mm ram surface: 700x450 mm hole in the table: Ø90 mm tool hole in ram: Ø50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 2100x1500x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 60 t, 370 mm, 10 mm
Eccentric Press Compressive Force 60 Ton Equipped: -Hydraulic clutch -Hydraulic overload protection
Stock number: PM2079, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: SMH60 D8
pressure: 15 t throat: - mm stroke: - mm Dimensions (L/W/H): 1200 x 1200 x 1700 mm total power requirement: - kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: PM2078, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: MH60 D8/B
Offer 25471 Specifications: - Compressive force 75 t - Projection approx. 300 mm - Table size approx. 800 x 600 mm - Height-adjustable table - Stroke adjustment approx. 16 - 140 mm - Plunger adjustment 80 mm - Stroke rate 80 rpm - Pneumatic connection - Drive 400 V - Space requirement approx. W 1800 x H 2450 x D 2000 mm - Weight approx. 4000 kg
maximum number of results exceeded
please refine your search
