eccentric used for sale

number: 96 Positionen weight: 600 kg condition: neu : 28 mm Special set 96 pieces, 28mm system, consisting of: 1x tool trolley 30x quick release bolts with twist lock short, without O-rings 8x universal stop 150 L - nitrided 4x universal stop 225 L - nitrided 8x stop and clamping angle 175 L - cast 2x stop and clamping angle 500 G left - nitrided 1x stop and clamping bracket 750 G left - nitrided 1x stop and clamping bracket 750 G right - nitrided 1x stop and clamping bracket 500 G left - nitrided 1x stop and clamping bracket 500 G right - nitrided 4x stop and clamping angle 300 G left - nitrided 8x prism Ø60-135 ° burnished - with collar complete with screw collar and countersunk head 16x professional screw clamps - nitrided 6x Professional screw clamp 45 ° / 90 ° - nitrided 4x universal stop 300 - nitrided 1x accessory set consisting of: Eccentric, Allen key, brush, sharpening ston ...

table diameter: 1500 mm table load: 5 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 10000 Nm 0: 1,5 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mm table load: 1,0 t swivelling range: 135 Grad turning speeds: 0,12 - 1,2 U/min : 820 mm welding current: 500 Ampere total power requirement: 0,75 + 0,55 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 1,2 t swivelling range: 0 - 120 Grad turning speeds: 0,06-0,6 U/min max. torque on the faceplate: 2400 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,75 + 1,1 kW weight of the machine ca.: 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,25 U/min max. torque on the faceplate: 900 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,37 + 0,75 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1000 - 1450 mm max. torque on the faceplate: 2000 Nm engine output: 0,75 / 0,55 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 560 mm table load: 0,3 t swivelling range: 0 - 90 Grad turning speeds: 0,25 - 4,0 U/min : 360 Nm welding current: 500 Ampere total power requirement: 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1300 - 2050 mm max. torque on the faceplate: 10000 Nm engine output: 1,5 / 1,5 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 2,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mm table load: 6 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 12000 Nm 0: 1,5 / 2,2 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 800 x 800 mm table load: 1500 Kg swivelling range: 0 - 105 Grad turning speeds: 0,15 - 1 U/min height adjustment: 672 - 1180 mm hollow spindle diameter: mm welding current: 500 Ampere max. torque on the faceplate: 3000 Nm total power requirement: 0,75 kW dimensions of the machine ca.: 1560x1120x750 m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fal ...

table diameter: 700 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min : 900 Nm total power requirement: 0,37 / 0,37 kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 10000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,5 + 3,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: unterschiedlich mm table width: unterschiedlich mm table height (lateral area): unterschiedlich mm weight: ca. 240 kg Description : - Special set for SIEGMUND 28 clamping tables included : - 1x tool trolley - 30x quick release bolts with twist lock short - 8x universal stoppers 150 L - nitrided - 4x universal stop 225 L - nitrided - 8x stop and clamping angle 175 L - cast - 2x stop and clamping angle 500 G left - nitrided - 1x stop and clamping bracket 750 G left - nitrided - 1x stop and clamping bracket 750 G right - nitrided - 1x stop and clamping bracket 500 G left - nitrided - 1x stop and clamping bracket 500 G right - nitrided - 4x stop and clamping angle 300 G left - nitrided - 8x prism Ø60-135 ° burnished - 16x Professional screw clamps - nitrided - 6x Professional screw clamp 45 ° / 90 ° - nitrided - 4x universal stop 300 - nitrided - 1x accessory set consisting ...

table diameter: 900 mm table load: 1.000 kg turning speeds: 0,12 - 1,2 U/min swivelling range: 0 - 135 Grad speed: Kipp 0,35 U/min welding current: 500 A dimensions of the machine ca.: 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 3,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,8 U/min max. torque on the faceplate: 450 Nm table pass: 80 mm welding current: 500 Ampere total power requirement: 0,18 + 0,18 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 600 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 2,0 U/min height adjustment: 850 - 1300 mm max. torque on the faceplate: 900 Nm engine output: 0,37 / 0,37 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mm table load: 2 t swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min : 4000 Nm 0: 1,1 / 0,75 kW welding current: 500 Ampere • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 3 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 6000 Nm 0: 1,1 / 1,1 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mm table load: 2000 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1100 - 1550 mm max. torque on the faceplate: 4000 Nm engine output: 1,1 / 0,75 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 4 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 8000 Nm 0: 1,1 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min height adjustment: 1450 - 2200 mm max. torque on the faceplate: 20000 Nm engine output: 1,5 / 2,0 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 20000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 3,0 + 4,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 3000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1200 - 1800 mm max. torque on the faceplate: 6000 Nm engine output: 1,1 / 1,1 kW welding current: 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.  ...

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3,5 mm roll diameter: 120 mm : 1550 mm engine output: 2,2 kW weight of the machine ca.: 750 kg Electric foot operated roller. Heavy duty welded construction. The back roller can be adjusted for conical rolling. The upper roller can be turned away for easy access to the work piece. Comfortable use, suited for workshops and craft shops. eccentric rolling foot pedal hardened rollers top roller has smaller diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 170 mm saw band length: 2085 x 20 x 0,9 mm cutting width: 180 mm cutting speed: 35 - 70 m/min : 110 mm : 90 x 90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70 x 70 mm : 185 mm : 180 x 180 mm drive capacity - workpiece: 0,75 kW range L-W-H: 1000 x 600 x 1500 mm weight of the machine ca.: 195 kg Sawing machine with base, European design. This machine is used for making small cuts. The saw blade tension can be adjusted manually. Quick-acting clamp. No vibrations due to heavy duty saw arm. The machine has a 2-speed motor, saw blade guide bearings. The sawing pressure can be adjusted through a hydraulic cylinder. Features: adjustable sawing pressure automatic stop with cooling system eccentric quick-acting clamp separate metal control panel 2-speed motor precision adjustment of the runners with material stop switch controlled saw blade cover gear whee ...

plate thickness: 4,5 mm roll diameter: 120 mm : 1300 engine output: 2,2 kW weight of the machine ca.: 660 kg Electric foot operated roller. Heavy duty welded construction. The back roller can be adjusted for conical rolling. The upper roller can be turned away for easy access to the work piece. Comfortable use, suited for workshops and craft shops. eccentric rolling foot pedal hardened rollers heavy duty welded steel construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1300 mm plate thickness: 1,5 mm roll diameter: 75 mm min. dia.: 85 mm engine output: 0,75 kW weight of the machine ca.: 420 kg Electric roller. Foot control. Heavy duty welded robust construction. Back roller can be adjusted for conical bending. Upper roller can be turned away for easy removal of the work piece. Comfortable operation and both hands free. For workshops and handicraft. with foot pedal (forward, backward) made of cast iron back roller adjustable by hand wheel lower roller adjustable by handle, eccentric safety cord with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM st 1g Format circular saw milling machine Format sliding table in 1.2m Cutting height: 67mm 90° 40mm 45° Auslegertich kpl. Cutting width 700mm Saw blade: swivel 45°, max.250mm 1.8KW 2 motors 400V 50HZ Milling machine: rigid 90° Milling machine rpm: Speeds: 5000/7500 rpm. Milling stop max tool diameter max. 160mm Suction pipe 60 - 120mm Weight 190kg Eccentric tensioner G&STÜ-5501048

: neu : 9403 : 180 € : 1 : 1/4, 3/8, 1/2 mm : 4 kg operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: kW weight of the machine ca.: 0,35 t The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 2700 mm stroke: 280 mm ram adjustment: 120 mm daylight (stroke down, ram adjustment above): 550 mm table surface area: 2700 x 1200 mm ram surface: 2700 x 1200 mm no. of strokes: 20 - 40 Hub/min total power requirement: 22 kW weight of the machine ca.: 33 t dimensions of the machine ca.: B 3520 x T 2850 x H 4550 m Double-column eccentric press in a special design - size of the GTX 250 S, but only a pressing force of 160 t Furnishing: - hydraulic roller bars - hydraulic Tool clamping above + below - Motorized ram adjustment - infinitely variable speed control - hydraulic overload - Grease central lubrication - Hand oiler for ram weight compensation converted by MAWI GmbH Germany: - Swivel arm with Siemens Touch control panel - Light barrier from Sick - Safety control from Pilz + Siemens - frequency converter - Monitored protection area at the rear  ...

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal schitten units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm,

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage units Workspace: Wire thickness: up to 6.0 mm Belt width: up to 80 mm Feed length: up to 520 mm Power: 10 - 250 rpm

capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm : 150 mm : 150x150 mm : 150x210 mm : 90 mm : 90x90 mm : 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm : 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position. Standard features: - Hydraulic cylinder - emulsion pump - Eccentric tensioner - Underframe - saw blade - 400V plug 16A The data for this ad was created with ModulMWS - the software solution of LogoTec ...

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 70 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 3.5 mm Bandwidth: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm

The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...

boring depht: 220 mm; drilling length: 340 mm; height adjustment: 145 mm; drilling head tiltable: -60° bis +60°; mieter fence adjustable: 30° - 90°; motor power: 1,5 / 1,9 kW; speed: 1400 / 2850 U/min; suction connection: 100 mm; machine length: 1200 mm; machine width: 1050 mm; weight: 240 kg; The top model of the LBM range features a drill head tilting 60° to the right and left, making it the perfect solution for assemblies around staircases, window and frame works. The motor is moved single handed and the work table is mounted firmly which allows for processing of oversize workpieces such as doors for example. Properties Maintenance-free linear guiding allows for feed of drill depth Quick lift system allows for effi cient, economical processing without time-consuming winding of crank Smooth, stepless height setting of drill head features fi ne adjustment and ...

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

table diameter: 560 mm table load: 0,3 t swivelling range: 0-90 Grad table turning speeds: 0,25 - 4 U/min Torque: max. 360 N/m centre of gravity: max. 150 mm total power requirement: 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-H ...

table diameter: 700 mm table load: 0,6 t swivelling range: 0-90 Grad excentricity: 200 mm table turning speeds: 0,2 - 2 U/min Torque: max. 900 N/m total power requirement: 0,37 kW dimensions of the machine ca.: 1,1 x 0,92 x 0,8 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

table diameter: 900 mm table load: 1 t swivelling range: 0-135 Grad excentricity: 200 mm table turning speeds: 0,12 - 1,2 U/min Torque: 2000 N/m total power requirement: 0,75 kW dimensions of the machine ca.: 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the carriage end. Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up  ...

Martin T25 swivel spindle cutter with 5 axis control Brand: Martin Type: T25 M-No.: V232232 Year of construction: 1996 Engine power: 7.5 / 9.5 kW or 10 / 13 HP, 2 speeds Dalander engine Swivel milling spindle: -5° - +45° Milling mandrel ø30 mm Spindle holder: ISO quick change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: NC control at eye level with LCD screen Spindle height NC-controlled electromotive angle adjustment (program controlled or manual operation) Inclination -5° - +45° NC-controlled electromotive spindle height adjustment (program controlled or manual operation) Stops: NC-controlled electromotive of the two stops adjustment to the milling mandrel (program controlled or manual operation) NC-controlled ele ...