With extruder 100/24D. Head as needed (in stock: Single head,. 4-fold 140 mm c2c(with or without view strips), five-fold 110 mm c2c, seven-fold 80 mm c2c. Machine in our works, connected and can be viewed
cap. max. 1.500 kg flour/h\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n
Star screening machines to the seven of compost, organic waste, wood chips, waste wood, etc.-screen size lower deck 15-30 mm - sieve size upper deck 60-120 mm - air separators on the upper deck oversized particles to the discharge activity of plastic films and paper.
ok for assembling with a silo system\r\ninput from the silo d 300 mm\r\ninput clap pneumatic controlled\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new
Screening machine for compost, biomass, wood chips.-equipment: radio, drive to the sieve sizes draw deck of rentals, funnel attachment 20-40 mm-sieve sizes upper deck 60-120 mm,
Weight approx.: 271 kg Dimensions (l x w x h) approx.: 2350 x 520 x 400 mm Description: Welding turner, Maximum weight of the parts 5000kg, Diameter of the rollers 268mm, Width of the rollers 126mm, Minimum distance between rollers: 400mm - Maximum distance between rollers: 1200mm - Minimum diameter allowed: 300mm - Maximum diameter allowed: 3250mm - Peripheral speed: 0,122 to 1,265m/min - Permissible load per roller: 1250kg - Control motor: 0.75cv , Stock number 58177
Schenck vibrating machine with frame, spring, Vibromotors: 1.7 kW Working length: L = 2500 mm Working width: W = 400 mm Total height: H = 1300 mm.
Weight approx.: 618 kg Dimensions (l x w x h) approx.: 3240 x 750 x 520 mm Description: Welding turner, Diameter of the ferrules: 400 to 4300mm, Minimum distance between rollers: 620mm, Maximum distance between rollers: 1725mm, Peripheral speed: 20,3 to 122cm/min, Permissible load per roller: 5000kg, Motor: 1hp, Motor turntable: EBM 20, Maximum workpice weight: 10000 kg, Diameter of rollers: 380mm, Stock number: 95845 ATTENTION: Machine loaded on overhead crane.
Centrifuge D6, capacity 50m 3/H, turn 2250tr/mn, Durschmesser drum 650 mm, 110 KW, temperature-30 ° / + 90 ° Accessories: control box, frequency control. This machine is been tested in 2000 and has become obsolete. For according in the case breakdown by main engines.
Single station machine for articles up to 8 ltr. Extruder EN 60/24 d. Moog TMC control. Closing system in end of 2017 refurbished by Uniloy. Machine in very good condition
Vibrating sieves to the screening of different granule fractions. Containers with conical or on wheels. Simple, low-cost maintenance. Easy to clean. Quick replacing of the filter network. Engine 2-4 pole. Power discharge tamping system on request. Designed for continuous operation.
Screening machine, demonstration machine Make / brand S & F GmbH Type / type ASM-200 Screen area / screen area 2.0 mÂ² Printing performance / sreening performance approx. 30 m³ / h (E.g. for wood chips, etc.) Power / input rating 2, 2kW Suitable for E.g. following printing goods / adapted for: Sawdust/wood chips Sawdust/wood dust Sawdust/sawdust Old wood/old wood shavings etc.
Professional edge Bander EBM 200-slot machine oklejaj?cy in-with a polisher, oklejaniem top-down to simple elements. Cutting ball truncating flange on evenly with cooking and with allowance. Great opportunities at a very affordable price! Truncating edges front/end on the outside of the machine with the help of the cutter blade, off-cycle. This model also has a. -Rounding of the edges to: full-3 mm, half-1 mm -Bevel edging with a thickness of 0.5 mm -Buffing -To apply the simple items. -Edge banding with a thickness from 0.4 to 2 mm and a height of workpieces from 12 to 45 mm. -With a very large table 2040 x 340 mm. Specification: -The thickness of the edge (PVC) 0.4- ...
Edgebander prostliniowa EBM 200 with polishing Professional edge Bander EBM 200-slot machine oklejaj?cy in-with a polisher, oklejaniem top-down to simple elements. Cutting ball truncating flange on evenly with cooking and with allowance. Great opportunities at a very affordable price! Truncating edges front/end on the outside of the machine with the help of the cutter blade, off-cycle. This model also has a. -Rounding of the edges to: full-3 mm, half-1 mm -Bevel edging with a thickness of 0.5 mm -Buffing -To apply the simple items. -Edge banding with a thickness from 0.4 to 2 mm and a height of workpieces from 12 to 45 mm. -With a very large table 2040 x 340 mm. Spe ...
600 mm shoes, mono, hammer, shear and tilt hydraulics, Air Condition, quick coupler, 1 bucket, undercarriage 60%; Accessories: 600 mm Platten, Mono, Hammer-, Scheren- und Tilthydraulik, Air Condition, Schnellwechslung, 1 Tieflöffel, Laufwerk 60% // 600 mm shoes, mono, hammer, shear and tilt hydraulics, Air Condition, quick coupler, 1 bucket, undercarriage 60%, Hammer/Scherenhydra
Edgebander CORMAK EBM-380 , CUTS and STICK CROWN -machine in stock -After reviewing the technical -ready to go -year of manufacture 2015 TECHNICAL PARAMETERS: -Thickness of edging 0.3-3 mm -The width of the flange 10-65 mm -Shaft Height 15-8 cm -The minimum radius of 20 ° -3 speed -Heat output 1.65 kW -Pressure 6 bar -Pneumatic Shears for cutting flanges (tape stuck on) -Robust, rugged design -Input sensor and the truncation of the tape -Automatic download and cut strips from the tray -Easy-to-use and convenient embedded control Panel Dimensions: -length: 1100 mm -width: 830 mm -height: 1150 mm -Weight 195 kg Two variants of adhesive! 1. Directly o ...
Screening machine make / brand S & F GmbH Type / type ASM-150 Screen area / screen area 1, 5 mÂ² Printing performance / sreening performance around 20 m³ / h (E.g. for wood chips, etc.) Power / input rating 1, 5kW Suitable for E.g. following printing goods / adapted for: Sawdust/wood chips Sawdust/wood dust Sawdust/sawdust Old wood/old wood shavings etc.
Working length: max 3200 mm. Incl. electrical Backgauge with counter Hydraulic system in the machine and two hand operation. Weight: approx. 2400 kg. Very good working condition. The machine was only cut paper and paperboard. The machine can be seen under power and is immediately available.
Single station machine for articles up to 4 ltr. Extruder 60/24D. AC motor with frequency inverter. Extrusion head BK 120 with accumulator 1 litre. Needle blowing top and bottom. Siemens S5 control unit. Clamping force 64 kN
Flow rate: 2,85 m3/min. Discharge pressure: 10 bar Power: 22 kW Main rotor speed: 6840 RPM. Including new air boiler, b. 2016 Good einstzbereiter condition. The plant can be seen under power and is available.
CNC railway control HEIDENHAIN TNC 355 12 Pocket tool changer Traverse paths: X = 900, 500 = Y, Z = 500 mm. Spindle retainer: SK 40 with hydr. Tool clamping Spindle speed: 40-4000 RPM. Universal Swivel Head with drill spindle, hub: 90 mm. : Solid angle table clamping surface 500 x 1000 mm. Electr. Handwheel, full cab, div. toolholders, Coolant system and complete documentation. Weight: approx. 3500 kg. Dimensions, B x D x H: CA. 2100 x 2500 x 1950 mm. The machine can be seen under power and available at short notice.
Extruder 100/22D. 6 - fold head 100 mm center to center make Mueller. PLC-Control Siemens Simatic PP 17. Good condition. Optional: Bottles and waste conveyor, granulator, leak tester within the machine, material mixer / conveyor
FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996
Bellmer screen belt press 500 mm, p. 1.1kW, activity 4 to 5 m3/h L. 5800, l. 1200, H. 1700mm, weight approx. 2.4T Powder flocculant plant. Whole unit in very good condition.
CNC control: BOSCH 6 x tool changer Punching pressure: 250kN. Working range: 2000 x 1000 mm (medium format). Sheet thickness: max 6.4 mm. Incl. drawer cabinet with punches and matrices, (full) Tool - magazine cars with various shots, Matrices and punch grinder, TRUMPF type: quicksharp,. Tool setting device TRUMPS, type: quickset,. Photoelectric system for the workspace and complete documentation. Weight: approx. 8000 kg. Very good working condition. The machine can be seen under power and is immediately available.
Accuheadmachine for articles up to 220 ltr. 2 extruder S 70, output approx. 170... 180 kg in HDPE. Clamping force 700 kN.Accuhead 6 kgs. Hydraulic bottom moving control. Good condition. Free approximately January 2019
Courtyard mobile variant of the SM 518 proven, compact, moving axis.
Two-station machine for containers up to 3 litres with single head or 2 x 1.5 litres with double head. Clamping force of 50 kN. Closing plate 400 mm in length, width 300 mm, 2 x 100 mm deep. Head as per need. Could be completely overhauled, also with new B & R control