e t used for sale

Fan, fan, electric motor, blower, axial fan, axial fan -Manufacturer: ebm, axial fan type A2E200-AF02-02 TW -Voltage: 230V 50W -Speed: 2740 rpm -Quantity: 2x fans available -Price per piece -Dimensions: 255/140/H280 mm -Weight: 2.2 kg

ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use

General Electric Äkta Valves and Pumps PV 908 INV 907 IV 908 P 960

tool clamping area: 1 - 32 mm weight: 8 - 12 kg Driven toolholders 1: Eppinger, Mod. 6035-3: 270 Euro 2: Eppinger, Mod. 6052: 360 Euro 3: Eppinger, Mod. 6049-2: 360 Euro 4: Wendel, Mod. A 3930: 720 Euro 5: Eppinger, Mod. 10809-1-3: 720 Euro Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Banderolier BandAll BA BA 32-20/77 ERH; serviced and inspected by customer service; Belt width 75mm; Frame size 320x200mm; Print mark control; suitable for paper and foil; Stainless steel; Automatic operation or by foot switch; Meter reading 102900. Banding machine BandAll BA 32-20/77 ERH; checked and tested by the support of BandAll; band width 75mm; frame size 320x200mm; Print Mark Control; used for paper or foil; stainless steel cover; automatic banding or using by foot switch; counter 102900.

4 x valve block with interface module EX250-SDN1 and with 20 x solenoid valve SV2100R-5FU

Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer, regulator -Manufacturer: Elvo, potentiometer controller with on/off switch -Type: ED 1.5 GS -Voltage 220 V 1.5 A 270 W -Dimensions: 105/75/H135mm -Weight: 0.3 kg

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder -Manufacturer: Eroglu, cutter holder with coolant channel in original packaging -Type: HSK 63-12-80-K -Art.No.: A63.04.12.K -Transport dimensions. 470/100/H95mm -Weight: 1.2 kg

Connectors, plugs, sensor modules -Manufacturer: Wago, Winsta ECBT2 connectors, 25 pieces -Connector: Wago 3-pin with strain relief housing -Quantity: 6 boxes of 25 pieces each available -Price: per carton -Cardboard dimensions: 200/185/H55 mm -Weight: 0.6 kg/carton

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Traglsat: 7000kg Load center of gravity: 600mm Battery: 80V SN: T322080279

Door opening button, push button, door opener -Manufacturer: eao, Door opening button with mounting kit (original packaging) -Type: 56-210102-00 410 -Voltage: max. 137 VDC -Quantity: 10 pieces available -Price: per piece -Dimensions: 160/140/H30 mm -Weight: 0.1 kg/pc.

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: SEW-Eurodrive, helical gearmotor type R63DT80N4TH -Speed: 1400/21 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm -Protection class: IP54 -Dimensions: 495/550/H200 mm -Weight: 30 kg

Robuschi ES55/2P-RVP80-CAR Blower Serial: 4001 Air blower, in box, 30Kw, 3Ph

Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe -Manufacturer: Garant Eroglu, scanning head -Recording: Eroglu HSK 63-08-65 -Reading accuracy: 0.01 mm -Dimensions: Ø 63 x 310 mm -Weight: 0.9 kg

Relay, contactor, semiconductor contactor, contactor, coupling relay, relay module, interface relay -Manufacturer: Phoenix Contact, relay module -Type: EMG 22-REL/KSR-24/21-21 -Manufacturer Part No.:2950323 -Number: 9x relays available -Price per piece -Dimensions: 75/25/H60 mm -Weight: 0.1 kg/piece

tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder -Manufacturer: Eroglu, milling cutter holder with coolant channel Ovp -Type: HSK 63-08-65-K -Article No.: 06140P010294 -Dimensions: Ø 63 x 126 mm -Weight: 0.8 kg

Centrifugal fan High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph

Sideshift, side lift, forklift blade -Manufacturer: Kaup, sideshift type 1T151P2 from forklift Still EFG 1.5/5004 -Load capacity: 1600 kg -Stem dimension: 67 mm -Dimensions: 950/100/H600 mm -Weight: 78 kg

Double hose reel, reel, hydraulic hose reel, hose reel -Manufacturer: Hans H. Meyer, double hose reel from electric forklift Still EFG 1.5/5004 -Type: 7-21 -Dimensions: 280/200/H280mm -Weight: 9 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, gear type R62 i 6.72 -Speed: 208 rpm at 1400 rpm -Shaft: Ø 30 x 60 mm / Ø 19 x 40 mm -Number: 1x gearbox available -Price per piece -Dimensions: 370/190/H200mm -Weight: 22 kg/piece

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, gearbox type R803-LP90 i 186,65 -Speed: 7.5 rpm at 1400 rpm -Shaft: Ø 50 x 100 mm / Ø 16 x 16 mm -Dimensions: 490/290/H310mm -Weight: 68 kg

Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram adjustment: 85 kW table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: Ø280 mm table height: 830 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t throat: 280 mm stroke: 10-90 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 750x540 mm ram surface: 600x200 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø35 mm weight of the machine ca.: 3,7 t dimensions of the machine ca.: 1800x1800x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

Sealing insert, Seal -Manufacturer: DOYMA, Curaflex sealing insert A unused Ovp -Type: A DPS DN 150, for 86.0 - 94.0 GGV / EPDM -Article No.: 101009015000 -Nominal diameter: DN 150 for 86 - 94 mm -Quantity: 1x insert available -Dimensions: Ø 150 x 44 mm -Weight: 1.3 kg

Eillert G1500 belt slicer stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: Flender, shaft coupling -Type: N-Eupex Size 225 -Shaft: Ø 60/70 mm see photos -Dimensions: Ø 225 x 180 mm -Weight: 26.1 kg

Power resistor, wire potentiometer, resistor, potentiometer, dual potentiometer, regulator -Manufacturer: Elvo, Potentiometer controller with on/off switch -Type: ED 1.5 G -Voltage: 220 V 1.5 A 330 W -Dimensions: 135/75/H100 mm -Weight: 0.3 kg

Hinge, door hinge, folding hinge, steel hinge, side wall hinge -Hinge: with extendable pin -Type: 2-part 100/50 mm height 25 mm see photos -Material: stainless steel -Number: 72x hinge available -Price: per piece, minimum order 2 pieces. -Total dimensions: 100/40/H25 mm -Weight: 0.1 kg/piece

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: Ø 400x4.0x32 Z96 = T 11.95 -Speed: n max. 5000 rpm -Dimensions box: 480/460/H15 mm -Weight: 3.1 kg

feed pressure: 10 bar Effective free air delivery: 252 L/min Receiver capacity: 90 l / bar Number of cylinders: 1 Stk. motor: 400Volt / 1,5KW V / KW turning speeds: 777 U/min weight of the machine ca.: 70 kg. range L-W-H: 0,97 x 0,5 x 0,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: NE3 350x3.2x32Z=108neg -Speed: n max. 5000 rpm -Use: non-ferrous profiles/plastics -Quantity: 2x saw blade available -Price: per piece -Dimensions box: 385/385/H10 mm -Weight: 1,9 kg

x-travel: 19000 mm y-travel: 7600 mm z-travel: 2000 mm w-axis: 5000 mm table surface area: 18500 x 5000 mm table load: max. 500 t distance between columns: 5500 mm power capacity - milling spindle: 110 kW tool taper: CAT #60 Control: FANUC 15i MB total power requirement: - kW weight of the machine ca.: 650 t Overhauled & modernized in 2007 equipped with: - CNC control FANUC 15i MB - 5 heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Counting scales, scales, parcel scales, digital scales -Manufacturer: Kern, counting scale type CFS 6KO.1 -Weighing range: max. 6 kg -Division: 0.1 g -Dimensions: 340/315/H130mm -Own weight: 3.2 kg

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 702 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 405 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 847 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Hinge, door hinge, folding hinge, steel hinge, hinged hinge -Hinge: Internal hinge, removable -Type: 2-part 75 x 50/25 mm flush -Material: stainless steel -Quantity: 176 pieces available -Price: per piece, minimum order 4 pieces. -Dimensions: 75/30/H10 mm -Weight: 0.1 kg/piece

fan, blower, fan wheel, cross-flow fan, cross-flow blower, cross-flow ventilator, roller fan -Fan blower cross-flow fan -Engine: EMI 105B-50110/3 -Voltage: 230V / 110/300 W / 1100 rpm -Fan wheel: both sides Ø 150 x 240 mm -Dimensions: 1040/220/H200 mm -Weight: 10 kg

5 power dimmers 5 Regulator Photo on request Picture on request

Stuffing machine Eberhardt 5 x 7 Kaiserstüpfler, star rolls with 5 stud boxes Machine mobile Connection 400V, 16A-CEE plug Machine Many more bakery machines in stock!