e t used for sale

Gear motor, electric motor, electric gear motor -Manufacturer: Emod, gear motor type SK400SUF-63L-4/2 -Speed: 175/356 rpm -Power: 0.15/0.19 kW -Shaft: Ø 14 x 60 mm -Protection class: IP54 -Dimensions: 300/170/H180 mm -Weight: 10.6 kg

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Jungheinrich EFG216 Forklift truck Serial: FN319410 2005, Electric forklift, max lift 1500Kgs, treble mast

Perfect binder Eurotecnica 425 Year of construction 2002 Art.Nr. PS6041

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Eurodrive, geared motor -Type: R40 DT71D4 -Speed: 32 rpm -Power: 0.37 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Dimensions: 405/146/H213 mm -Weight: 15.6 kg

Nominal power in kilowatts: 7,7 MW Maximum power: 8,47 MW Nominal turning speed: 1150 1/min Maximum turning speed: 2200 1/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm 8 MW test bench for gears, closed loop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6803 Type: SUPRAREX SXE P-1 400 Producer: ESAB Created: 2007 Parameters: Table height: 700 mm Cutting speed: 24000 mm/min Sheet thickness: 300 mm Cutting length: 2x6000 mm Cutting width: 3000 mm Machine height: 2190 mm Machine length: 2025 mm Machine width: 4654 mm Machine weight: 2000 kg

Jungheinrich EJE116 Electric pallet truck Electric pallet truck, load capacity 1600Kgs, forks 1150mm, with spare battery

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Eurotherm, servomotor type ACM2n 0220-4/1-3 -Speed: 4000 rpm -Torque: 2.2 Nm -Shaft: Ø 14 x 30 mm -Protection class: IP54 -Dimensions: 200/88/H120 mm -Weight: 4.2 kg

Circulation pump, centrifugal pump, water pump, pump, heater -Manufacturer: Speck, circulation pump type EWN8/2-4 -Engine: Type EWN8/2-4 -Dimensions: 180/130/H180 mm -Weight: 3.6 kg

Jungheinrich EFG216K Forklift truck Serial: FN492262 Electric forklift, max lift 1500Kgs, treble mast, with charger

Inv. Num. : 7386 Type: Dimension Elite Producer: Eden Praine Created: 2015 Parameters: Weight: 128 kg Equipment: Cartridges with print cartridges

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.1 kg/pc.

Perfect binder Heidelberg Eurobind 600, machine number FMDDA0 000027, year of manufacture 2007, 1 clamp, hot melt, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg

The type 221 fully automatic case erecting machines are designed to handle average sized cases in a wide variety of styles. The machines seal with either self-adhesive tape and are extremely simple to use. They are versatile, reliable and efficient. They also have a small footprint and offer great value for money. CASE DIMENSIONS The standard type 221 case erecting machines can handle cases between 200-500mm length, 150-400mm width and 175-600mm height. SPEED Up to 16 cases per minute Machine is ready for immediate use and available

Groninger production line for RTU nested syringes comprising MWU 010 semi-automatic opening system for outer bags of sterile tubs, MWF 100 fully automatic machine for the removal of cover foils and the fabric inserts of sterile tubs and DFVN 5000 filling & closing machine (CIP/SIP-system, filling system RKP with re-circulation suitable for suspensions, etc.), capacity up to 9,000 objects per hour Including format parts to handle the following syringes: 0.5ml / D=6.85mm 1ml long / D=8.15mm 1ml short / D=10.85mm 2.25ml / D=10.85mm 5ml / D=14.45mm 10ml / D=17.05mm 50ml / D=31.5mm

Level indicator, sight glass, steel reflector, sight glass fitting, sight glass device -Manufacturer: Eriks, Econ Level Indicator -Type: FIG. 1590 -Test pressure: 3 bar -Number: 2x level indicators available -Price: per piece -Dimensions: 100/60/H3050 mm -Weight: 25 kg/pc.

Staplers Hohner Economy 25/40 - 15/25 - 25 in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Mains choke, mains filter, output choke -Manufacturer: SEW Eurodrive, output choke type PBTP/30GF/VO -Item No.: 813 558 4 -Dimensions: 170/65/H185 mm -Weight: 1.1 kg

Key data: 13000 , 4200 , 110

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Printingmachine - Two Colour (perfector) Make Aurelia Model 702P Elite Year 1985 ? Maximum sheetsize 720 x 1020 mm Dampening Alcohol fiilm dampening with Miniweb chilling pump Perfecting 2/0 - 1/1 Details high pile delivery Available Direct

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and error ...

max. plate size: 824 x 1143mm mm min. plate size: 228 x 252mm mm max. speed plates: 15 /h incl. Rip incl. Compressor inkl. Glunz & Jensen MP 85 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

metal band saw blade, band saw blade, metal saw band -Manufacturer: Eyltool, metal band saw M42 unused -Type: M42 2060x20x0.9 ZpZ 8/12 -Number: 10x metal saw band available -Price per piece -Transport dimension: Ø 230 / 40 mm -Weight: 0.3kg/pcs

Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

B&A REF: 9023 TON: 80 SHOT WEIGHT: 140 SCREW DIAMETER: 35MM STROKE VOLUME: 183CM3 INJECTION PRESSURE: 2429AR PLATEN SIZES: 560 X 510MM DBTB: 420 X 370MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC 6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 14.2W ROBOT INTERFACE: EUROMAO 67 ROBOT: GEIGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONES

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Hanger bolts: solar fasteners 49 pieces -Type: M10x180 -Price: per piece / minimum purchase 10 pcs. -Weight: 0.1 kg/pc.

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Backstation Backcombi Wiesheu Dibas EBO 64S- L Wiesheu Backcombi consisting of 1x convection oven Dibas 1x exhaust hood, 3x shelves EBO and base frame -Exhaust hood 64_200-240V50/60H Year: 2016 Convection oven Wiesheu Dibas 64 S C: -for 5 trays each 60x40cm -Voltage: 400V 50Hz -Power: 9.6 kW -Year of construction: 2016 Deck furnace 1x shelf EBO 64-S: -for 1 tray 60x40cm -Floor entrance height: approx. 15cm -Voltage: 400V 3/N/PE -Power 3.45 kW -Year of construction: 2016 Deck oven 2x shelf EBO 64-L: -one tray per shelf 60x40cm -Floor entrance height: approx. 13cm -Voltage: 400V 3/N/PE -Power: 7.1 kW -Year of construction: 2020 External dimensions complete approx.: 93x100x221cm

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Still, charger Belatron type E 24/90 eco EU -Input voltage: 220 V 50 Hz -Power: 25.2 V/90 A -Dimensions: 550/410/H780 mm -Weight: 94 kg

LOW-TENPERAURE SCREW COMPRESSOR UNITS SERIAL NUMBER:BLG1509002 VOLTAGE:415V/3Ph/50Kz COOLING CAPACITY:115.3 POWER:101.2KW REFRIGERANT/OIL:R507A/BSE170 SIZE:270017001700 DATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO. LTD

LOW TEMPERATURE SCREW COMPRESSOR UNITS MODEL BLGS -6NY+BLGS-SNYRSCTA) SERIAL NUMBER:BLG1509003 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:115.8kW POWER:101.2KW REFRIGERANT/OIL:R507A/BSE170 SIZE:2700"17001700 DATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO.. LTD

semi-hermetic screw condensing units MODEL:BBLGS2-8OMY-FB(R134A) SERIAL NUMBER:BLG1509005 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:216.4kW POWER:49kW REFRIGERANT/OIL:R134A/BSE170 SIZE:28501374.6`1321.4 ATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO., LTD.

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: 160251 E713 -Dimensions packaging: Ø 150 x 20 mm -Weight: 0.1 Kg

Proximity switch, proximity sensor, position switch, socket cable -Manufacturer: Festo, socket cable ovp -Type: 30935 E413 -Voltage: 24V -Dimensions packaging: Ø 180 x 20 mm -Weight: 0.2 Kg

semi-hermetic screw condensing units MODEL:BBLGS2-100MY-FB(R134A) SERIAL NUMBER:BLG1509006 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:248.4kW POWER:56kW REFRIGERANT/OIL:R134A/BSE170 SIZE:31501374.6' 1432.9 DATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO. LTD.

Inductive sensor, electronic sensor, sensor cable, connection cable, link cable -Manufacturer: ifm, Connection cable, sensor cable, original packaging -Type: E10662 -Quantity: 1 cable available -Packaging dimensions: 200/160/H30 mm -Weight: 0.2 kg

Muffler, exhaust system, muffler, silencer, muffler -Manufacturer: Eberspaecher -Type: 029 691 18 45 481 06 -Dimensions: see photos -Number: 2x silencers available -Price per piece -Total dimensions: 560/230/H130 mm -Weight: 6.2 kg

Jungheinrich ERC-Z-12 Load capacity 1200kg Year of construction 2002 Battery renewed in 10/2019 Very good condition, has been regularly serviced Only 333 operating hours with Timetronic charger Bipqiakbhfd Lifting height 4300mm Free stroke 1500mm with initalhub Triplex mast Height 1900mm Emergency stop button

Abrasive paper, emery paper, abrasive cloth, abrasive discs, abrasive bodies -Manufacturer: Tyrolit, grinding wheel 200x120x51.A170x80 unused original packaging -Type: SK-140499B.EOOB -Number: 3x grinding wheel available -Price per piece -Dimensions Ø 200 x 120 mm -Weight: 3.3 kg

Transformer, current transformer, explosion-proof lamp -Manufacturer: Steel, voltage converter with transport frame -Type: 230 V 24 V see photo nameplate -Protection class: EEx de.IIC T4 -Accessories: incl. 24V lamp -Dimensions: 740/370/H1020 mm -Weight: 27 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pallet stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Engine brake: Type IQ BFK458-10E -Wheel: 230 x 082 mm -Dimensions: 300/210/H650 mm -Weight: 64 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pedestrian stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Motor brake: Type IQ BFK458-10E -Wheel: Type 1537 -Dimensions: 300/270/H650 mm -Weight: 65kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 140/130/H360 mm -Weight: 7.5 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 7.5 kg

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200E /12mm High-quality stainless steel table top with recessed castors Mobile on castors (2 with brake) Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Includes foot control (foot pedal) Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2019/09 Function tested, machine ready for immedia ...