e t used for sale

Hitema ECA012 chiller Serial: W07G8986 2010, chiller, max pressure 28bar, refrigerant R407C, max pressure water side 3bar, max amps 14.6A, 3Ph

Gear motor, electric motor -Speed: 99 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Number: 1x gear motors available -Price: per piece -Dimensions: 300/145/H130 mm -Weight: 5.3 kg

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Manufacturer: ifm -Type: ecomat300 AC5215 -Number: 36x modules available -Price: per piece -Weight: 0.15 kg/piece

ERIKA RECORD dough dividing and warp knitting machine Automat Type 4 - used, refurbished in 2023 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough enclosing ring Piston with non-stick coating Swivel machine head for easy cleaning Dividing knife electrolyt-plated four active times and active time switch-off (parts/presses only) no oil in the working area of the machine Machine with heavy casting stand for vibration-free operation Long-lasting, low-wear drive complete with three plastic knitted plates

ERIKA RECORD dough dividing and warp knitting machine semi-automatic type 4 - exhibition machine, brand-new condition, year of manufacture: 2025 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough embracing ring dough piston with non-stick coating tiltable machine head for easy cleaning dividing knife electrolyt-plated no oil in the working area of the machine machine with heavy casting stand for vibration-free operation complete with three plastic moulding plates

Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Electronic control module for folding machines EUROFOLD, FALTEX used. Art.: PS21 Spare part number: 235.102 It can also be used for other types of machines. Is integrated into the vacuum supply system. Controls the operation of the machine, makes it possible to adjust the work by clock; with interruption, by a certain number of sheets; Perform direct and backward counting of the sheet. The photo on the site may differ from the original (we send it on request)

Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Lower support: 720 mm -Support height: 1400 mm -Weight: 62 kg

Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Motor for folding machine Eurofold / Foldmaster 235 / 435 / 200 / 400 Art.: PS2356

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 5.5 kW -Speed range: 15 to 90 rpm -electrically adjustable -Drive shaft: Ø 40 mm -Design: B3 -Protection rating: IP54 -Dimensions: 600/700/H270 mm -Weight: 130 kg

Safety switch, safety switch, TZ -AC-15 4 A 230 V -DC-13 4 A 24 V -Protection class: IP 67 -Number: 8x available -Price: per piece -Dimensions: 125/38/H42 mm -Weight: 0.1 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg

Safety control, safety door switch, safety switch, safety sensor, magnetic switch -Type: 161 271 AC -Protection class: IP 67 -Number: 18 available -Price: per piece -Dimensions: 75/40/H55 mm -Weight: 0.2 kg

Inductive sensor, electronics sensor -Connector: M8 x 1 -Connection: 10-30 V DC -45 mm: long -Switching distance: 3 mm -Number: 2 pieces -Price: complete -Weight: 30 g

Brotschneidegatter, Fabr. Rego RMT, Type EMT 10, semi-automatic

Used RO station by EPURO type RO 2000 PL. New 2017. Technical data: Medium - water, Nominal capacity Q [m3/h] - 2.0, SDI -

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: Microdrive-3 UDZ-70 -Power: 33-44 kW -Connection: 380-480 V -20/+5% 48-62 Hz -A: 70 A -Dimensions: 440/145/H685 mm -Weight: 35 kg

Basic module, distributor -Connection: 8 x M12 -PNP -5- pole -Dimensions: 150/50/H20 mm -Weight: 0.13 kg

Amplifier unit, amplifier -Type: DT110-U15-A-C2 -Series: multiNCDT -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

Dosing system, dosing device, dispenser for dosing system, dosing machine -Type: 1500XL -Dimensions: 265/150/H65 mm -Own weight: 2 kg

Input module for valve terminals -Type: CP-E16-M8 -16 inputs: 24V DC -Signal status display: via 16 LEDs -CP- functionality -M8: connector -1x: M9 CP connection -PNP/NPN -Protection class: IP 65 -Dimensions: 65/150/H50 mm -Weight: 0.34 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm -Weight: 19 kg

Clamping bush, hydraulic clamping bush -Type: ETP-EXPRESS R-25 -Flange: O 58 mm -Flange width: 14 mm -Shaft: Ø 30 mm -Shaft length: 35 mm -Bore: 25 mm -Dimensions: Ø 58/H49 mm -Number: 4x available -Price: per piece -Weight: 0.27 kg/piece

Dosing pump, 2-component dosing pump -For dosing liquid media -Dosing rate: 1.4 l/h -Pressure: 10 bar - Electrical connection: 100-240 V 50/60 Hz -Weight: 3.6 kg

Type: ENR.185 Producer: Hitema Serial numb.: F04BV1088 Created: 2019 Radiator: R410A Number of compressors: 4 pieces Cooling power: 175 kW Number of pump: 1 piece Inox evaporator and integrated water tank Condtition: like new, operation time 13 month mail adress.: zuzana.novotna@novotny-chlazeni.cz

Used first-class renovated and almost brand-new ready-to-use extrusion recycling machines make EREMA, various types, for sale. Offers according to the description of your needs. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg

Gear motor, electric motor, electric gear motor -Speed: 57 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 22 mm -Protection class: IP 54 -Quantity: 1x available -Dimensions: 455/155/H195 mm -Weight: 18.8 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: GR199 CF-D-160-10 -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H54 mm -Weight: 6 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: CF-D-160-10 -Shaft: Ø 22 mm (pre-drilled) -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H70 mm -Weight: 9 kg

Braking unit -Brake with clutch -Power: 0.15 kW -Resetting force: 30 kp -Stroke: 50 mm -Dimensions: 630/320/H460 mm -Weight: 56 kg

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

Gear motor, electric motor, electric gear motor -Speed: 32.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 33 -Dimensions: 440/210/H180 mm -Weight: 20.7 kg

Gear motor, angular gear motor, electric motor, electric gear motor -Motor power: 0.37 kW -Speed: 106 rpm -Shaft diameter: 30 mm -Construction: B3 -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/210/H200 mm -Weight: 23 kg