130,507 used machines on RESALE, but how to find them? Machine Search
weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 330 mm : 450x320 saw band length: 4250x34x1,1 mm band speed: 40 + 80 m/min table height: 845 mm saw band width: 34 mm total power requirement: 2,2 kW weight of the machine ca.: 0,985 t dimensions of the machine ca.: 1,4 x 2,0 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
VLB GROUP ECO 92 NC2 tube bending machine was built in 2022 in Portugal by the VLB Group. The machine has only undergone a test run and has not been used in production conditions. The machine is used for precision bending of tubes and profiles with a maximum diameter of 92 mm. All machining parameters are programmed in an advanced industrial controller with a touchscreen. It allows precise basic movements, i.e. bending angle (Y axis) and tube rotation (Z axis), to be performed fully electrically. The distance between bends (X axis) is, in turn, precisely set using mechanical stops. Thanks to the technical solutions used, the offered ECO 92 NC2 mandrel bending machine is the perfect choice for high-quality workpiece bending in small and medium series. The total weight of the machine is 2420 kg. Technical specifications of the VLB GROUP ECO 92 NC2 tube and profile bending machine - ...
PRESSURE GAUGE DENKI” DK-1-3X2-1/2PT
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 10/95 mm capacity 45 degrees: flat: 135x60 mm engine: 2,5 0: 1700 / 3400 U/min weight of the machine ca.: 600 kg dimensions: 2,0 x 1,5 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 940 mm total power requirement: 1,5 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Champion CHBM 600 Eco Single Tray Burger Box Making Machine. 1. This new generation of three-dimensional moulding box machine features: with stable quality, high efficiency, speed up to 160pcs/min. 2. In the same machine, you only need to change different moulds to create different specifications of the boxes, hamburger boxes, boat shaped box, food packing box, carton products such as fried chicken box. 3. It adopts the hot air device, can achieve high efficiency, high accuracy and make PE-coated paper box. 4. This machine is mostly using high quality seal bearings, long service life, good stability. 5. The machine uses the PLC intelligent control system, PLC control with automatic stop. 6. The main moulds are manufactured with pine, which is economical for mould replacement. 7. Can automatically collect data inventory of finished goods. 8. High quality Synchronous belt makes no ...
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: Hydraulic single-column press with cycle feed Type: HEP 100 Specifications Electrical connection: 400 volts/50 Hz +/- 3 % Drive power: 5.5 kW Total power requirement: approx. 6.5 kW Control voltage: 24 volts/50 Hz +/- 3 % Hydr. Max. connection: 210 bar Set: 200 bar Performance data Ram speeds AB: approx. 48 mm/sec. at max. 100 kN compressive force Working speed AB reduced adjustable to: approx. 10 mm/sec. at max. 100 kN compressive force Ram speed ON approx. 96 mm/sec. at max. approx. 50 kN retraction force Plunger stroke: max. 200 mm Flow rate of the pump: approx. 15 l/min.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Type: Punching/Nibbling Machine Manufacturer: EDEL Type: Micromat 205 Year of manufacture: coming soon Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-EDE-0925 DESCRIPTION We offer you a used punching / nibbling machine from the manufacturer EDEL. Available now Technical data and accessories will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
bore capacity in steel (diameter): 32 mm arm length: 410 - 1000 mm workpiece height max.: 765 mm coolant: ja boring spindle diameter: 38 mm diameter of quill: 70 mm spindle stroke: 225 mm boring spindle: MK 4 mm/min spindle turning speed - stepless: 70 - 2000 U/min feed range - spindle: 0,04 - 0,32 mm/U column diameter: 225 mm bore radius max./min: max. 1130 mm table surface area: 630 x 1320 mm height adjustment: 500 mm base plate: 1500 x 1000 mm T-slots: 4 Stück T-slot - distance: 18 mm total power requirement: 2,2 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m shift of supports: 590 mm without turntable and tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 0 mm gear width: 0 mm max. module: 40 min. module: 1 weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Belt width: variabel Belt length: bis 14000 mm Total belt loading: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 14 mm Boring power: 15 mm : MK 2 bore depth: 70 mm throat: 180 mm : bis 275 mm : 529 mm table surface area: 250x220 mm column diameter: 65 mm Total height: 890 mm total power requirement: 0,6/1,0 kW : 420-2100 U/min. weight of the machine ca.: 63 kg Machine with CE mark! new machin Domestic equipments: - Stepless speed control - Table adjustment via rack - Digital speed display - Full motor protection - drill protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BONGARD SOLEO EVO M4 – Deck Oven | Demonstration Device | 3 stoves | Touch Control | Top condition Price: on request Location: 64832 Babenhausen Condition: Demonstration model (approx. 1 year old, one floor brand new) ________________________________________ Technical data & equipment • Model: BONGARD SOLEO EVO M4 • Shelves: 3 stoves (each 190 mm high) • Baking surface per tier: 120 × 80 cm → suitable for 4 × 40×60 cm or 2 × 80×60 cm trays • Door system: Split door opening (bakery opening – inwards) • Control: Sensitive² touchscreen (7") with: o Programmable baking recipes (temperature, time, steam, extraction) o Energy Saving mode o Automatic swath (ml accurate) o Start time planning & statistics function ________________________________________ Equipment & Options • Integrated steam condenser → no exhaust air duct required • Stainless ...
1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.
For sale is a complete, well-maintained used sawmill plant with EWD sawing line, consisting of modern components for log processing, sorting and disposal. The facility has been regularly serviced and is in excellent condition. Part of the line is still in operation and can be visited by appointment. Available from approx. June 2026. System components at a glance: Log yard: Sorting, surveying and debarking plant, SPRINGER, built in 2017 Nicholson debarking machine, built in 1992 Microtec surveying system, built in 2015 30 sorting boxes Cross-cut plant, built in 2017 Sawing line – EWD: Twin-shaft circular saw DWK 700, built in 1999 Profile chipper PF 19-3SP/V, year of manufacture 2003 Resawing circular saw BNK 225/6, built in 2003 Complete mechanization and control Edger EWD Optimes BK-100B Sawn timber sorting and ancillary facilities: 7 sort ...
Operating hours: 600h Specifications: Travel in X/Y/Z: 450 / 350 / 400 mm Distance from spindle nose table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Working feed X/Y/Z: 10 - 2000 mm/min infinitely variable Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (rigid angle table) Max. table load: 30 kg (rigid angle table) Vertical milling head: Speed range: 10 - 5000 1/min Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2270kg Equipment: - Swivel control panel - Shafts and gears hardened and ground - Digital display Sinumerik 828D - Clockwise / counterclockwise rotation of the main spindle - Linear guides - Four-bearing milling spindle radial/axial - All pinch points eliminated by covers - Main motor with spindle brake
Originates from prominent pharmaceutical manufacturing in Europe. Fully enclosed and guarded structure – extra safety for operators. Working Description: Marchesini Pack Service PS300 semi-automatic case packer for small to medium output production requirements; suitable for: Contract Packing, Pharmaceutical, Cosmetics, Nutraceutical, Medical Devices and other industries. The pre-formed cases must be placed directly on the loading area. Cartons are fed by conveyor from the machine in front of PS300 into its stacking unit, where they are collated upwards, as it is programmed through the Operator Interface Panel. The case is then automatically fed and discharged on a free running conveyor. - Wide range of cases and products working sizes - Cases feeding area is entirely safe, free from any mechanical movement - Torque overloading control on ...
Folding machine Shoei Model Mach Eight Year 1995 Serial 7092 Size Min: 150 x 210 mm / Max: 470 x 640 mm Feeder suction wheel + stream feeder Folding configuration 2 plate buckles + 1 knife Delivery detachable belt delivery Details Vacuum pump, noise hood, electronic speed control, sheets separations head Condition Rollers, belts, vacuum roller are all good Available direct
PART NUMBER 7794 SPECIFICATIONS - inlet width 530mm - inlet height 200mm - shaft diameter 370mm - shaft width 510mm - knife length 510mm - number of knives 2pcs - autorever – adjustable - sieve dimensions 50x50mm - Bottom geared pulling shaft 1.5kW - Toothed pulling shaft from above 1.5kW - main motor power 30kW - vibroline loading table / vibroline length 3900mm - vibroline width 500mm 1.5kW - Receiving conveyor belt length 5000mm - tape width 380mm - hopper with chute for sprues 2500x3020x2200mm - Platform 4650x750x1770mm - Dimensions of the machine with conveyor belt and vibroline length/width/height 8900x1200x2550mm - weight about 6000kg ADVANTAGES – adjustable autorever – with vibroline 3900mm – with conveyor belt 5000mm – German production – very good condition – used chipper Net price: 98900 PLN Net price: 23548 EUR depending on the pr ...
Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665
Water pump, make Wilo, type: IL-E80/8-40-BF-R1, dry rotor pump with frequency converter, approx. 160 m³/h, 8-40 m head, 15 kW, 2915 1/min revolutions, nominal pressure 16 bar, YOC 2007
ALPHA Q 351 PROGRESS PULS MM WLG FD • Year 2016 • Inverter welding machine, DC, pulse, water-cooled • Multiprocess: MIG/MAG, TIG lift arc, MMA, air arc gouging • Water-cooled MIG/MAG inverter welding machine, pulse, with separate wire feeder Excellent Multimatrix welding characteristics • Equipped with Synergic characteristics for EWM coldArc, EWM coldArc puls, EWM pipeSolution, EWM forceArc, EWM forceArc puls, EWM rootArc, EWM rootArc puls and superPuls • Adjustable start and end-crater functions • Program operation with 16 programs per JOB • Equipped with Synergic characteristics for GMAW welding of steel/CrNi/aluminium • Infinitely adjustable arc dynamics (choke effect) • Large power reserves thanks to high duty cycle with all components heating up less as a result, guaranteeing a longer service life for machines when in use • ...
Flame Perkin Elmer mod. AAnalyst 200 Including: Air-Acetylene burner Controlled with LCD touchscreen Refurbished
Grinding length: 500 mm Grinding diameter: 300 mm Grinding wheel diameter: 400 mm Equipped with: - Bezel - Grinding wheels Country of origin: Germany Machine LxWxH: 2300 x 1700 x 1700 mm Machine Weight: 3500 kg
roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...
maximum number of results exceeded
please refine your search
