e t used for sale

Oil-Insulated Power Transformers for Sale Transformer 1 - Manufacturer: ELIN - Model: TDQ-164A11S9K-99 - Power Rating: 15 MVA - High Voltage: - 121.5 kV (Position 0) - 118.463 kV (Position -1) - 115.425 kV (Position -2) - Low Voltage: 6.3 kV - Current Rating: - High Voltage: 71.3 A (Position 0), 73.1 A (Position -1), 75.05 A (Position -2) - Low Voltage: 1375 A - Frequency: 50 Hz - Cooling: ONAN - Year of Manufacture: 1994 - Status: Out of service since 2022 - Notable Condition: Relatively high CO levels (due to oxidation); insufficient oil inhibitor content. Oil treatment with inhibitor replenishment recommended. Find more here - / Contact us at -

Oil-Insulated Power Transformers for Sale Manufacturer: ELIN Model: TDY-164A11S9K-99 Power Rating: 15 MVA High Voltage: - 121.5 kV (Position 0) - 118.463 kV (Position -1) - 115.425 kV (Position -2) Low Voltage: 6.3 kV Current Rating: - High Voltage: 71.3 A (Position 0), 73.1 A (Position -1), 75.05 A (Position -2) - Low Voltage: 1375 A Frequency: 50 Hz Cooling: ONAN Year of Manufacture: 1993 Status: In operation until 2025 Notable Condition: High CO levels, insufficient oil inhibitor content. Oil treatment with inhibitor replenishment recommended. Find more here - / Contact us at -

Ergomat TNG 32 + LNS Sprint 552 - Turning Center + Bar Feeder - FANUC 0i-TF CNC control - 60° inclined bed - Cross slides with linear guides - Parts separators - Coolant device -Conveyor - Switch-on time: 645 hours - Processing time: 390 hours - Year of construction 2022 LNS Sprint 552 - Bar Feeder - Rod Ø: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar passage Ø: 32 mm - Spindle speed max.: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Workspace: - Workpiece Ø/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank Ø: 20 mm - Tool holder 4-point: 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Po ...

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement

3 phase ONAN Transformer 20000V/400V Dyn 11, 50Hz From general service, new oil, Sale without guarantee, as is, where is

Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co.Year of construction approx. 1980Load capacity approx. 5 ton. Platform size 1700 x 1100 mmStroke max. 515 mmOverall height Table bottom with rail rollers 535 mmOverall height Table bottom without rail rollers 480 mmTable height raised with rail rollers max. 1050 mmTable height raised without rail rollers max. 995 mmTravel speed rail chassis approx. 8.5 meters/min. Motor power 4 kWNet connection 400 volts, 50 Hz hand switch for up and down on the cable safety limit switch

Immersion Cooler, Two-Stage Cooling suitable for Mettler Toledo DSC8822eCooling Unit, Water Cooler, Chiller, Laboratory Cooler, Cooler, Immersion CoolerTHERMO HAAKE Type EK90 / MTTyp No. 003-4403Ser. Nr. 1200001655/004Year of construction: 2000Working temperature range -90 ... + 40 CCothing: 300 W (at 20 C)Coolant R23 + R404ASsmoke length: 2000 mmImmersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e)Mains connection: 230 volts, 50 HzPower consumption: approx. 1 kW- cooling circuit with 2

Two identical timelapse cameras Enlaps, one of them including an annual license, are available. Years of manufacture: 2023/2024, image sensors: 2, camera resolution: 12MP, single image resolution: 2x4608/3456 pixels, panorama resolution: 6K, combined field of view: 220°, min. capture interval: 30s, device dimensions X/Y/Z: approx. 210mm/180mm/70mm, weight: approx. 20kg. Both devices are equipped with reinforcement plates and mounting arms. The device manufactured in 2024 additionally includes a myTikee PRO Storytelling license. Documentation available. An on-site inspection is possible.

Key data: 310 mm, 520 mm

Type of machine : CNC turning and milling center Manufacturer : EMCO Type EmcoTurn E65 Year of manufacture 2007 Control system Sinumerik 840 T Siemens Storage location : Hultfred / Sweden Switch-on hours : 46,000 h Automatic operation : 25,500 h Country of origin: Austria Delivery time end of May 2024 Cargo base free truck loaded Technical description Travel: X-axis : 210 mm Z-axis : 610 mm C-Axis : 360° Max. swing diameter over bed : 540 mm Max. swing diameter over face slide: 360 mm Max. turning diameter : 310 mm Max. turning length: 520 mm max. rod diameter 65 mm Center width: 650 mm Main spindle: Speed range - main spindle 60 - 4,200 rpm/-1 Drive power - main spindle 18 / 15 kW Max. torque 192 Nm Spindle head DIN 55026 / KK6 C-axis 0.001 ° Tool turret: 12 positions Tool holder VDI 30 DIN 69880  ...

Inv. Num. : 8736 Type: TURN E65 Producer: EMCO Created: 2018 Parameters: Control system: SIEMENS Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Maximum main spindle power: 22 kW Maximum spindle speed: 5000 1/min Max. rod diameter: 65 mm Length: 3335 mm Width: 2315 mm Height: 2450 mm Weight: 6500 kg

General SKU394U1130 LocationBarneveld CEcheck MakeLauda Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Thermal oil heater(Therminol D12) Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pump(2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) With jacketcheck General TypeTR 400 HK/HK-EX Mach.No.HKS08025 Year of construction2008 Floorspace1,75x1,00 m Total height2,50 m Weight1800 kg ATEX designedcheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

General SKU300U1003 LocationBarneveld CEcheck MakeCI Electronics Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel With jacketcheck General Type195/36 Sade P2 No.TP595 Floorspace0,80x0,65 m Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Miscellaneous transportCI ElectronicsConveying systems > Miscellaneous transportBrand > CI Electronics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU429T1358 MakeBrabender OHG Duisburg TypePlasti-Corder PL2000, Eurotherm Type 808 No.814 300 LocationBarneveld Main Features Inlet diameter15 mm L/D25 Specified Features - Viscosity test machine Single screw extruder(and with double) Screw diameter± dia.15 mm L/D± 25 Number of heating zones:1 With jacketcheck Air coolingcheck Inlet± Ø 15 mm Feeding with hoppercheck Max. temperature500 °C With jacketcheck Viscosity test machines MaterialStainless steel General Floorspace1,45x0,55 m Total height0,8 m Weight280 kg Extra Specificationswith two diffirent extruders headsViscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mach ...

This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for sale.Contact us for more information.

This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine.

This ERGOMAT TNG 32 was manufactured in 2022. It features a spindle with a bar capacity of Ø 32 mm and a maximum speed of 5000 rpm. The horizontal turning machine includes a Fanuc Oi-TF control and an LNS bar loader with a 3m capacity. Consider the opportunity to buy this ERGOMAT TNG 32 horizontal turning machine. Contact us for more information.

General SKU340X784 MakeBoekels LocationBarneveld TypeEWK 2000+/WS 1,25 KG CD Klasse X Main Features MaterialStainless steel Specified Features - Miscellaneous transport Capacity4-1500g With jacketcheck General No.VAB-13565-02 Year of construction2002 Floor space1,45x0,9 m Total height1,75 m Weight270 kg Extra Specificationsboekels checkweigher:Max belt speed: 0,92m/smax weight: 1500gminimum weight: 4gdivision value: 0,2gconveyor length 1450 mmconveyor height 800 mm, adjustableMiscellaneous transportBoekelsConveying systems > Miscellaneous transportBrand > Boekels What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Tuttnauer T-Edge 10 Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving benchtop autoclaves that give you high-speed, Class B performance. You'll save time so you can help your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that give you time to treat your patients. The T-Edge 10 and T-Edge 11 autoclaves operate daily without interruption, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For security and regulatory reasons, scan barcode data (including expiration date) for the patient record during treatment. Personalized username and password Printouts to store printouts (optional printer). Sophisticated data analysis capabil ...

Tuttnauer T-Edge 11 Tabletop Autoclave The T-Edge 11 fully automatic sterilizer is much more than just an autoclave Your skills are needed in your practice and your time is a crucial factor. T-Edge therefore frees you from unnecessary effort. Meets strict international standards Clinically proven applications High-resolution touchscreen Innovative technology Easy-to-use interface Elegant design Excellent user experience Sterilization at the touch of a button Select the desired program and press "Start" The autoclave takes care of everything else - "click and go". Technical data Kammerabm. ø x L: 280 x 460 mm Chamber volume: 27 litres External dimensions D x H x W: 500 x 500 x 580 mm Shell dimensions (D x H x W): 421 x 207 x 20.5 mm Power supply: 50/60Hz, 230V-1Ph+N+GND Connections: 1 Ethernet port, 2 USB ports, Wi-Fi, integrated connection for automatic water ...

Tuttnauer T-Edge 10 W Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving benchtop autoclaves that give you high-speed, Class B performance. You'll save time so you can help your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that give you time to treat your patients. The T-Edge 10 and T-Edge 11 autoclaves operate daily without interruption, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For security and regulatory reasons, scan barcode data (including expiration date) for the patient record during treatment. Personalized username and password Printouts to store printouts (optional printer). Sophisticated data analysis capab ...

General SKU312X497 MakeEngelsmann LocationBarneveld CEcheck Main Features MaterialStainless steel Inlet diameter280 mm Specified Features - Miscellaneous transport Capacity2000 kg With jacketcheck Miscellaneous transport MaterialStainless steel 1.4552 General No.40014 Year of construction2014 Mounted on legscheck With switchgearcheck Floorspace1,60 x 1,70 m Total height1,35 m Weight500 kg Extra SpecificationsWith pneumatic paddle movement, Demag chain hoist, load capacity 1250 kg, Engelsmann big bag lifting frame, load capacity 2000 kgMiscellaneous transportEngelsmannConveying systems > Miscellaneous transportBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit  ...

General SKU277T631 MakeGlatt TypeELD 60 Year of construction2016 Mounted on framecheck Main Features MaterialStainless steel Motor0.75 KW Height2700 mm Specified Features - Lifting/tilting machine Lifting machinecheck Lifting + tilting machinecheck Max. weight200 kg Lifting height2700 mm Hydraulic drivecheck With hydraulic unit(Ex) Motor0,75 kW 230/400 Volt MaterialStainless steel 1.4571 (316Ti) With jacketcheck General LocationBarneveld With switchcheck Floorspace2x0,6 m Total height3,9 m Weight900 kg CEcheck ATEX designedcheckLifting/tilting machinesGlattConveying systems > Lifting/tilting machinesBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...

General SKU254S227 MakeElmess (D) TypeDHG01B03St/SE-4 Flow heater No.826280/001 and 826280/002 Mach.No.826280/001 and 826280/002 Year of construction2016 Pressure Working pressure2 Bar Main Features Heating (medium)Electric Capacity8 KW Temp.820 °C Specified Features - Temperature control unit Horizontal:flow heater: Number of tubes:1 Tube diameter76,1mm Tube length900mm Wall thickness tubes2,9mm Max. temperature-10/550...820 degr. C Shell diameter219 mm With jacketcheck Temperature control units Temperating machine:flow heater: Gas heatingcheck Electric capacity4 kW 230 Volt (2x) Temperature-10/550...820 degr. C With temperature controllercheck MaterialStainless steel 1.4541 (321) General LocationBarneveld With switchgear(as is) Floorspace1,6x0,9 M Total height1,2 M Weight700 Kg CEcheck Extra SpecificationsUNUSEDTemperature control unitsElmessHeat e ...

General SKU224T215 MakeErnst Möschle LocationBarneveld Pressure Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume3700 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity3700 Ltr. Vessel sizesdia. 1400x2500 mm Dished topcheck Dished bottomcheck Manholedia. 400 mm Top connectionsDN 50 (2x) Outletdia. 38 mm With jacket106 Ltr. Max. temperature127 °C MaterialStainless steel 1.4306 (304L) With jacketcheck General No.89060 1 Year of construction1989 Mounted on legscheck Floorspace1,8x1,8 m Total height2,3 m Weight900 kg Extra Specificationswith CIP-nozzlesVertical tanksErnst Möschle BehälterbauTanks > Vertical tanksBrand > Ernst Möschle Behälterbau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

Horizontal turning machine manufactured in 2011. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available.

Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 6800 kg -Tires: solid rubber -Trailer hitch -External dimensions: 4760/2730/H585 mm -Own weight: 1100 kg

TIG welding rod, welding wire Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels, Suitability tested down to -40 °C. -net weight: 5 kg -Number: 7x package available -Price: per package -Weight complete: 5.3 kg/package

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc.

General SKU215X091 LocationBarneveld MakeOlsa Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure trays3 Bar Main Features MaterialStainless steel Volume1000 Ltr. Surface5 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface5 m2 Drying chamber capacity1000 l Drying chamber sizes1050x1050x1000 mm Max. temperature130 deg C With jacketcheck Max. temperature130 Number of trays11 (24 sample plates) Tray sizes40x480x960 mm (sample plate) Distance between the trays65 mm Tray capacity15 l per sample plate With 1 doorcheck Connection for the vacuum pumpcheck Without vacuum pumpcheck MaterialStainless steel 1.4301 (304) Information TypeER3 Machine number70037 Year of construction1987 Mounted on framecheck Floorspace1,5 x 1,5 m Total height2 m Weight1000 kg Extra Specificati ...

To mediate on behalf of the customer. Used machine Machine Type: CNC Double Turning Center Model: EMCO TURN 420MCplus Manufacturer: EMCO Control: Siemens 840D First commissioning: 2005 #009338 Location: Poland Control Siemens 840D Turning length 120 mm Turning diameter100 mm Number of axes 2x3 Spindle speed 5000 rpm The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

A motorized transport trolley with a cover is available. Load capacity: 300kg, max. speed: 6km/h, steering roller diameter: 260mm, drive wheel diameter: 350mm, loading surface dimensions X/Y: 1250mm/600mm, machine dimensions X/Y/Z: approx. 1650mm/600mm/1750mm, weight: approx. 170kg. Documentation available. An on-site inspection is possible.

This EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details.

51,570 liter ice water tank/pressure tank with insulation Material No. V2A Total height 10200 mm diameter 2900 mm Outer diameter 3480 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Minimum/maximum operating pressure (HP) 0.4 bar Operating temperature 90 °C Cylinder length 6500 mm Year of construction 1994 dished end/ domed end Cylinder: 15cm insulation 4 x sensors Manhole 440 x 340 oval Underbody: Dished end/domed end with foot ring and crane eye

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls ...

Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120–4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details.

A medium- to low-voltage distribution transformer France Transfo is available. Power: 800kVA, upper voltage: 10000V, overvoltage: 12kV, impulse voltage: 75kV, winding test: 28kV, connection: D YN05, insulation class: A, rated current: 46.2A/1155A, short-circuit voltage: 6%, cooling type: ONAN, oil weight: 450kg, weight: 2100kg. Documentation available. An on-site inspection is possible.

ETZ-2011 drainage excavators are designed for deep excavation and the construction of drainage ditches, a monument to the glory days of Talleks. Palms 510.

This 4-axis EMAG VSC 200 TWIN OP 50 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a maximum X travel of 850 mm and a rapid traverse speed of 45 m/min, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 50 vertical turning machine we have for sale. Contact us for further details.

This 4-axis EMAG VSC 200 TWIN was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and a robust turret with 16 tool stations, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN vertical turning machine we have for sale. Contact us for further details.

This 4-axis EMAG VSC 200 TWIN vertical turning machine was manufactured in 2005. It features a maximum chuck diameter of 200/250 mm and a swing diameter of 260 mm. With independent X and Z axis drives, it allows for the simultaneous machining of two workpieces. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN machine we have for sale. Contact us for further details.

This 4-axis EMAG VSC 200 TWIN OP 10 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and 30 m/min on the Z axis, this vertical turning machine offers efficient performance. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 10 machine we have for sale. Contact us for further details.

Key data: 40 mm, 240 mm

Machine Type: Column Drilling Machine Manufacturer: ERLO Type: TCA40 Year of manufacture: - Condition: used Offer will only be sent if a complete imprint is provided! Price 3.750 incl. 19% VAT / Fixed Price Location Warstein , Germany Reference number M-ERL-0526 DESCRIPTION We offer you a used column drill from the manufacturer Erlo. Performance in steel 40mm Strong gear feed Overall height 2350mm Weight 650kg Incl. solid 160mm machine vise. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

General SKU050C396 MakeEdak AG Dachsen No.1362 Year of construction1993 LocationBarneveld Specified Features - Tumbler dryer Material finishPolished inside Material Jacket materialStainless steel Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume500 Ltr. Tumbler dryers Double cone tumbler dryer(1x) Capacity1145 Ltr, Useful capacity 500 Ltr Diameter1300mm Cylindrical length350mm Conical length775/600mm Inlet/manhole dia. 500mm Outletdia. 300mm With jacketcheck Max. temperature-30/+200 Degr. C. Motor± 0,75 KW MaterialStainless steel 1.4435 (316L) Information Floorspace3,3x2,5 M Total height1,6 MTumbler dryersDiscountEdak DachsenDryers > Tumbler dryersDiscountBrand > Edak Dachsen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new - ...

Distance between points: 2300 mm, Min/max speed plate: 23/888 rpm., Speed number of plate: 12, Diameter over the bench: 720 mm, Diameter over carriage: 400 mm, Diameter of the plate: 300 mm, bar pitch: 57 mm, Counterbore cone nozzle: MORSE 4, Main engine power: 11 KW, Long: 3200 mm, Width: 1400 mm, Tall: 1400 mm.

Equipment: Overpressure,Manufacturer: Noble Tank,Condition: used,Volume: 2.470,Max. overpressure: 3.0,Design: standing,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 1.300,Cylindrical height: 1.500,Total height: 2.450,Wall thickness shelves: 3.8,Wall thickness cylinder: 4.5,Year of construction: 2015,Technical documents: Drawing, acceptance certificate, CE marking and declaration of conformity,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: disc, Spray head, outlet: DN32 DIN 11851, last purpose: brewery, material in contact with the product: V2A 1.4301

Equipment: Overpressure,Manufacturer: Noble Tank,Condition: used,Volume: 3,000,Max. overpressure: 2.0,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 1,390,Cylindrical height: 1,500,Total height: 2,500,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: disc,Outlet: DN50 DIN 11851 ,Note: slight adhesions,Remarks: Manhole Dimensions: approx. 300 x 395 mm (the manhole cover is missing),last use: Brewery,Surface exterior: marbled,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Current interferer:

General SKU256Y260 MakeJ. Engelsman AG Ludwigshafen Serial6023 Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Tumbler mixer Barrel mixercheck Capacity± 150 l. & ± 50 l. Diameterø 550 x 630: ø 390 x 430 mm Inletø 550: ø 390 Outletø 550: ø 390 With motorcheck 0,37 kW 220/380 V Speed mixer150 l.: ± 20 rpm: 50l.: ± 27 rpm MaterialStainless steel 1.4571 (316Ti) Information Year of construction1992 LocationBarneveld Floorspace1,1 x 1 m Total height1,2 m Weight220 kgTumbler mixersJ. Engelsmann AG LudwigshafenMixers > Tumbler mixersBrand > J. Engelsmann AG Ludwigshafen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

Lathe Emco Turn E 25 BJ 2011