e t used for sale

Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de

MAN D 2066 LF 12 - Euro 4-287 KW - 390 HP Motor was cpl. repaired according to RAL GZ-797: with new piston rings, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Old Engine must be returned

MAN D 2066 LF 31 - Euro 4-324 KW - 440 HP Motor was cpl. repaired according to RAL GZ-797: with new cylinder liners, Pistons, bearings, turbochargers, air compressor, injectors, high pressure pump - without starter, alternator and clutch Repair enabled old part must be returned. Maximum mortgage of old part of 4.000,00 = €

Motor was sealed front and rear new - upgraded oil pump, thermostat, oil filter, fuel - engine was installed on engine test bench and a cpl. Test run was carried out 6 months warranty on the motor mechanism Mileage only 200,000 km old part pledge 4,500.00 = €

MAN D 2876 LF 13 - Euro 4-390 KW - 530 HP Motor was cpl. repaired according to RAL GZ-797: with new pistons and liners, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Bauglieches old part must be returned

MAN 2876 LE302 gas engine (biogas) 190KW (also as 210KW-Version) It's a replacement engine for various biogas CHP. Overhauled according to manufacturer guidelines and RAL quality seal(maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a quotation. We have other Exchange engines (2848 with 250KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers, etc. and other components and spare parts for MAN gas engines in stock.

MAN 2848 LE322 gas engine (biogas) 250KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

MAN 2842 LE322 gas engine (biogas) 370KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2848 250KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

multifunctional equipment that allows self-adhesive materials and labels 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and gravure unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls Chiller Working hours 8872 Year of production 2006 more information on request

Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Output: P624236 60 hl/h

current intensivity: 400 A weight of the machine ca.: 125 kg dimensions of the machine ca.: 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 IP protection class 23 Insulation class H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 0.8 kW -Speed: 940 rpm -Shaft: Ø 22 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 400/195/H240 mm -Weight: 22 kg

electric motor, three-phase motor -Manufacturer: elsto, electric motor type AM-TK71BA2 -Power: 0.55 kW -Speed: 2640 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 55 -Dimensions: 300/185/H145 mm -Weight: 8.3 kg

Offered out of insolvency is a DC TIG welding machine EWM Tetrix 301 Activarc with Comfort T3.24 control Year of construction 2009 spotarc/ second pulse 2/4 stroke Water cooling Welding range 5-300Ampere 300Amps at 60% ED 250Amps at 100% ED Bzn9kovxtp 8meter hose package, with ground cable and pressure reducer

Automatic scale with ejector and roller transport max 40 kg for various max 300mm wide containers

GENERAL Project No.: 905670 Quantity: 1 pcs. Manufacturer: TACCHELLA Type: Elektra 1018 MPC Control: MPC Year of Make: 1999 Condition: Used machine Layers approx.: less than 1 layer DESCRIPTION CYLINDRICAL GRINDING Max. grinding diameter 350 mm Max. grinding length 1000 mm Center height 180 mm Center width 1000 mm GRINDING SPINDLE UNIT Travel in X/Z 350/1180 mm Max. rapid traverse speed in X/Z 10/10 m/min Grinding headstock can be swivelled manually Belt-driven grinding spindle for external grinding wheel right with max. diameter x width x bore 400x50x127 mm left with max. diameter x width x bore 450x80x203 mm Max. circumferential speed 35 m/s2 Max. power at ED 10-40/100% 7.5 kW Mounting MK5/ASA4 TAILSTOCK Tailstock can be moved manually Tailstock quill holder MK4 Cylinder Fine Adjustment Tailstock Manual Dresser with dressing tile on tailstoc ...

bed length: 2790 mm bed width: 2 x 240 mm bed height over floor: - total power requirement: 0 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,51,61,6 m No. 0302 2-station end trimming machine /cutting and centering machine EMAG, type TEC 2/1000 S SIEMENS System 3 control Working area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kW Accessories: Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1. coolant supply for station 1. The machine is equipped with 4 spindles, which are steplessly infinitely variable from 500-5000 rpm via separate DC motors. adjustable. Processing options: Grooving, peeling, turning, drilling (thread), thread chasing, chamfering, countersinking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-performance pneumatic embossing machine Pneumatic embossing machines allow the reproduction of embossing designs on various materials such as leather, plastic, synthetics, non-woven fabrics, flock, and others using pressure and temperature. This can be used for signs, logos, decorations, or lettering. By branding your products, you can strengthen customer loyalty to the guaranteed quality, aesthetics, and durability they associate with a particular brand or logo. The machine is equipped with: - Temperature control - Cycle time control - Belt feed length control - Clamping force control - Manually extendable/retractable table The machine is in perfect, like-new condition.

grinding diameter: mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

Steam Turbine 1 and major components Plant part Manufacturer Year of construction techn. data turbine VEB EKM 1970 generator VEB EKM; VEB Bergmann Borsig 1970 31250 kVA x 6,3 kV condenser VEB EKM 1970 "Bearing oil plant, pumps, "VEB Apparatebau Leisnig-Tragnitz; Filter Cooler" VEM, Siemens, VEB EKM and KSB" 1969 Steam jet cleaner Wilhelm Wigand ca. 1970 Condensate pumps VEB EKM ca. 1970 Find more here - / Contact us at -

CNC processing centre Brand: TecnoTeam Type: Enjoy Basic 3 Achsen New machine Save your space: Standing upright means progress for human! - With a vertical CNC machine you save a lot of space: Wether for consuming material or a further machine, you have more space to use in your storage. Easy machine use: - TPA makes the use very easy, you find this software at several well-known machine brands - You see the programmed processings on a virtual display, no matter which process: if circle, bow, linear millings or drillings, - Create job lists in the CAM - Forget the calculator, the machine calculates for you. - For this software several genious tips and tricks are possible. With realiability to success: - Technoteam uses High-Quality components from well-established producers. - We modify the machine exactly to your needs: If you process massive wood, you get a stro ...

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Manufacturer: Homag, Type: Eingabeeinheit mit LCD Anzeige und Tastatur, Model: 2-083-02-7107, Serial number: 2-083-02-7208, SN number: 2-083-02-7106, Year: 1992, Year :1992

for sale is a MIG -MAG welding machine from Ess Schweißtechnik Bad Waldsee, HV 8534, Subject to prior sale, changes and errors!

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo + Extraction auger (if needed) available also with hopper+loading screw conveyor, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered AS IS, WHERE IS. or RECONDITIONED, price options: as is, checked, lightly reconditioned, totally reconditioned

VIBRO CLASSIFIER FOR GRANULATES, 2 outlets, dimensions : 500 x 1.400 mm., screen holes 8 mm Ø, all parts in contact with water are in AISI304 stainless steel, wheeled supporting structure, complete with connecting plug, machine offered checked for good conditions, total dimensions : 1.900 x 850 x 1.000 kg.300

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: EST Ticino Type: ET-BM 400 Turning length: 1500 mm Turning diameter bed Ø: 800 mm Turning diameter slide: 470 mm Turning diameter pit Ø: 400 mm Pit length: 750 mm Spindle bore: 130 mm Power spindle: 15 kW Bed width: 600 mm Quill: 130 Ø Stroke quill: 300 mm Spindle mount: 6 Mk Speed: 600 rpm Dimensions (estimated) Length: 4500 mm Width: 1800 mm Height: 1800 mm Weight: 5200 kg with accessories: -Safety equipment - Face plate, four-jaw chuck, clamping jaws, tool holders, tips, drill chucks, tools All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the S ...

30 pcs generators with diesel engine Engine Type: Perkins 2506C-E15 TAG2 Power PRP: 500 kVA Power LTP: 550 kVA Year: 2012 Hours: Less than 300 Speed: 1500 1/min Generator: Leroy Somer LL6114F Voltage. 400/231 V, 50 Hz Type: Container Was used as an emergency power system, only ran for test runs and inspections. Subject to prior sale - errors possible! Internal reference number: E-1004-102

Emhart TUCKER ETF50R.00.54/12.5.13-25BM Stud Welder Technical details: Manufacturer: Emhart Teknologies (TUCKER GmbH) Model / Type: ETF50R.00.54/12.5.13-25BM Item number: T045 006/400 Voltage: 400 V, 50/60 Hz Make: Made in Germany Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Emhart TUCKER ETF50R.00.70/5.12-30F7 Stud Welder Technical details: Manufacturer: Emhart Teknologies (TUCKER GmbH) Model / Type: ETT50R.00.70/5.12-30F7 Item number: T045 001/400 Voltage: 400 V, 50/60 Hz Make: Made in Germany Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

General SKU212T513 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure vapour evaporator9 Bar Main Features Surface5.7 m2 Specified Features - Falling film evaporator Condenser:trickling film cooler MakeBuss SMS Mach.No.60429-1 Year of construction1994 Heating surface5,7 m² Tube capacity400 Ltr. Number of tubes:61 Tube diameter25 mm Tube length1250 mm Shell capacity65 Ltr. Max. temperature-10/200 °C MaterialStainless steel 1.4571 (316Ti) Information MakeBuss Mach.No.60429-1 Year of construction1994 Extra Specificationswith vessel: ø600x1000 mm, 280 ltr., outlet: DN80Falling film evaporatorsBuss-SMSColumns > Falling film evaporatorsBrand > Buss-SMS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU403S966 LocationBarneveld MakeAlfa Laval (SE) TypeTL10-BFG Pressure Working pressure7 Bar Main Features MaterialStainless steel Surface40 m2 Size length1500 mm Sizes width375 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface40 m2 Capacity36,6 ltr / 37,5 ltr Number of platens81 Plate sizes375x1500mm ConnectionsDN100 (4x) Max. temperature100 degr. C MaterialStainless steel 1.4401 (316) With jacketcheck General No.30110-16415 Year of construction2017 Floorspace1,2x0,5 M Total height2 M Weight900 Kg Extra Specificationsincluding 1 spare end plate and 3 spare intermediate plates.material sealing: EPDMUNUSEDPlate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...

The SEW-EURODRIVE KA97 / TDRE132M4BE11 system is a powerful bevel gear motor that is specially designed for applications with high torques and compact space conditions.

inner diam. 350 mm.

General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C MaterialStainless steel Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...

General SKU201P051 MakeAPI Schmidt-Bretten GmbH &: Co, KG TypeSIGMA K 52 SCL Year of construction2012 LocationBarneveld Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface96.3 m2 Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface96,3 m2 Capacity245+242 Ltr Number of platens168 Connections(4x) DN100 Max. temperature110 degr.C. MaterialStainless steel 1.4404 (316L) With jacketcheck General Floorspace2,7x0,6 M Total height1,7 M Weight2500 KGPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKUR0078 MakeTMCI Chemtech TypeCR 0327 No.WO 0327/01 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor5.5 KW Surface0.1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Heating surface0,1 M2 Cylinder sizesdia 110 x 320mm Inletdia. 20mm Outletdia. 20mm Motor5,5 kW 380-415 Volt Information Floorspace1,0x0,6 M Total height1,4 M Weight260 KgScraped surface heat exchangers-Heat exchangers > Scraped surface heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S767 MakeVau Tgermotech GmbH &: Co.KG (DE) No.WH-11-1872-132006-11 Year of construction2011 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.8 m2 Specified Features - Plate heat exchanger Plate heat exchangerscheck Number of stages:1 Heating surface5.8 m2 Capacity27 Ltr ConnectionsDN80(2x), DN50(2x) Max. temperature-30/200 degr.C. Capacity18.8 KW MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Floorspace0,9x0,7 M Total height1,1 M Weight260 KG CEcheck Extra SpecificationsCondenserPlate heat exchangersThermotechHeat exchangers > Plate heat exchangersBrand > Thermotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...

General SKU201P050 LocationBarneveld MakeAPI Schmidt-Bretten GmbH &: Co, KG TypeSIGMA K 52 SCL Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface96.3 m2 Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface96,3 m2 Capacity245+242 Ltr Number of platens168 Connections(4x) DN100 Max. temperature110 Degr.C. MaterialStainless steel 1.4404 (316L) With jacketcheck General Year of construction2012 Floorspace2,7x0,6 M Total height1,7 M Weight2500 KGPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

LAB FILM EXTRUDER BETOL 2525, for testing granules, single screw extruder, screw Ø 25 mm, blown film die head 60 mm., 3,0 kw d.c. motor and drive., 4 heating zones on barrel., 2 die head heating zones, cooling on screw and throat, calibration cage, nips and rolls, tower, 500 mm wide double collection frame, control panel, type: lab extruder

General SKU227Y123 LocationBarneveld MakeTerlet Type190 l. No.89-063 1 Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor7.5 KW Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Capacity190 l. Cylinder sizesø 570 x 1230 mm Max. temperature100 °C With jacket34 l. &: 2,6 l. InletDN50 OutletDN50 Motor7,5 kW, 380—415 V Speed± 66 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) With jacketcheck General Year of construction1989 Mounted on framelegs Floorspace1,20 x 0,90 m Total height2,40 m Weight1000 kg Extra Specifications6-arms scraperScraped surface heat exchangersTerletHeat exchangers > Scraped surface heat exchangersBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ...

The Tetra Pak EasyRide Conveyor is a specialized conveyor system designed for the efficient transport and buffering of beverage cartons in aseptic filling lines

The Tetra Pak Easy Ride Conveyor is a conveyor belt system specially designed for the transport of beverage cartons in aseptic filling lines. It serves as an efficient solution for handling and buffering packaging between the different stations of the production line. The Tetra Pak Easy Ride Conveyor is often used in combination with other Tetra Pak machines such as the TBA8 or TBA19 filling machine. In such systems, the Easy Ride Conveyor takes on the task of efficiently transporting the filled and sealed cartons and buffering them between the various production stations. This helps to optimize the production process and minimize downtime. This model is a custom made by TetraPak. It is very space-saving and functional.

General SKU272W407 MakeTerlet Terletherm LocationBarneveld CEcheck TypeT2-4M MS Pressure Working pressure10 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Motor11 KW Surface4.4 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Heating surface4.4m² Capacity132 l. Cylinder sizesDia. 725x1350 mm Max. temperature150°C With jacketcheck Max. temperature150°C InletDN80 OutletDN80 Motor11 kW, 415 volt Speed66 rpm MaterialStainless steel 1.4401 (316) With jacketcheck General No.97.0908.4 Year of construction1998 Floorspace1,3x0,9 m Total height2,5 m Weight1400 kg Extra SpecificationsCool-/heatings medium: water, glycol or steam.Material scrapers type: PTFE Technical specs Extra informationVolume 14/18 l., allowable temperature 150°C, pressure -1/4 bar, cooling/heating medium inlet DN50,Scraped ...

Used Used Case Erector TMG Formec: Year: 2002 Condition: As Is Used Case Erector TMG Formec Year: 2002 Model: formec Speed: 5.000 bph Gluer nordson Safety protections Code: G 63 More details: https://bottlingscout.com

Technical Specifications & Performance Data The EURO TEMA FC-2000HM is a second hand, high-throughput case erector designed for the dry end of a used bottling line. Built for reliability in industrial packaging, it erects cartons to feed downstream case packers handling glass bottle formats common in beverage production. Its performance and configuration make it suitable for lines producing wine, beer, water, and juice, and for integration after filling, capping, rinsing, and labeling stations. Manufacturer / Model: EURO TEMA FC-2000HM Year of manufacture: 1997 Category: Case Erector Rated output: up to 2000 cartons per hour (dependent on carton size and material) Primary container context: Glass bottles Bottle formats typically cased: 0.06 L miniatures and 0.75 L standard bottles Electrical: 380 V, 50 Hz, 4 kW installed power Operational status: In production Documentation: Manuals avai ...