e t used for sale

OK-Corp Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF with integrated Carton Erector/ Bottom Flap folder & adhesive tape Bottom flap sealer, Carton top Flap Openner & PE Film Carton Liner from a Roll of Film Full Stainless Steel Construction, Automatically Erects Cartons, tapes the bottom, Lines the Cartons with film from a Roll., Carton Sizes: L x W x H, 250 mm x 200 mm x 150 mm (min), 600 mm x 475 mm x 600 mm (max) Speeds upto 15 Cartons per/ min Siemens S7 PLC Controls, Condition: as new, Immediately available EXW our Warehouse Enger, Germany, Length: 200 to 600 mm, Width: 200 to 500 mm, Carton size min.: 250 mm x 200 mm x 150 mm, Carton Size max.: 600 mm x 475 mm x 600 mm

- Hydraulic clutch - CE-Safety 2e hand opperator system - Adjustable stroke / ram  - Full set books / drawing / CE-Mark - Note in the Neck / Throath machine is repaired ! - Only EUR 5500

travel -x axis: 180 mm travel -z axis: 370 mm Total weight, approx.: 65 kg dimensions of the machine ca.: 2,0 x 1,2 x 2,0 m Tool Presetter DMG Microset - ECO 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

Strip dewoven, de-fleece machine Maja ESB 4434 V, to, derinding and skinning, with ribbon and open use, 2 speeds adjustable, new bearings and sealing rings rollers, partly new bearing gears, with operating instructions, year of construction 2006, Connection 400V, dimensions LxWxH approx. 85x100x133cm, weight approx. 280kg, good used condition, fully functional

Belt loader, coolant filter, wheel changing equipment, grinding and drag rules and grub screws, Grinding wheel dimensions (od x id x width): 610 x 355 x 304,8 mm, Ø min / max to grind: 2/150 mm, Regulating wheel speed nº: infinite, Min/max speed of regulating wheel (r.p.m.): 10/225 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi TD, Dive (auto/manual): Automatic , Dimensions of the regulating wheel (OD x ID x W): Ø350 x Ø203,2 x 355 mm, Infeed (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 177.5 mm, Maximum infeed grinding length: 355 mm, Motor power cooling: 0,70 Kw, Coolant system motor power: 0,70 Kw, Grinding wheel head motor power: 37 Kw, Total power: 45 Kw, Voltage: 220/380Kw, Long: 1.165 mm, Width: 3.398 mm, High: 1.700 mm, W ...

basket dimensions: 0 control: 0 total power requirement: 0 kW weight of the machine ca.: 0 t dimensions of the machine ca.: m heating capacity: kW ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power (W) 8 ...

Vakona ESK 850 STL-B incl. loading, top condition

Enotecnica Pillan 40cm x 40cm 22 Plate Filter. Filter Plate Stainless Steel, consisting of 22 plastic plates. Filter type 40cm x 40cm. DIN Fittings + RJT Male Butterfly Valve This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

REF-2476 ULMA ETNA HITECH VERTICAL FORM-FILL-SEAL MACHINE Vertical form-fill-seal machine (VFFS) Manufacturer: ULMA Model: ETNA HITECH 280X Machine no.: 60281145 Year: 2009 Power: 7kW Voltage: 400V Overall dimensions: width 150 cm, length 220 cm, height 200 cm.

pressure: 225 t chamfer lenght: 2050 mm distance between columns: 1550 mm control: CYBELEC DNC 1200 PS Eco stroke: 550 mm table height: 700 mm throat: 405 mm distance between table / ram: 320-870 mm column arm: 405 mm weight of the machine ca.: 14.000 kg Accessories / equipment: - controlled axes: Y1 - Y2 - X - R - Z1 and Z2 can be moved manually - Lasersafe angle measurement - Pneumatically adjustable support table - pneumatic upper and lower tool clamping - 2-hand foot control - manual crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible.

Height=1.77 m, Overall length= 1.58 m, Overall width= 0.89 m, Net weight= 343 kg,

The scope of delivery includes: 01x End Stand Riser, used Shelving system: Bito Type:PRO Material color:sendz. galvanized Frame profile: P5 Profile dimensions: 120 x 76 x 2.25 mm Pitch holes: 50|50 mm Height: 500 mm + extension tab Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Paper cutting machine Polar 66 ECO Year of manufacture 2012

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit.

This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information.

This EUMACH SUMO 1400 Vertical Machining center was manufactured in the year 2004. It is equipped with a HEIDENHAIN 426 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm, is good condition and well maintained.

This 3-axis Eumach LBM-1500 vertical machining center was manufactured in 2016. Consider the opportunity to buy this Eumach LBM-1500 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information.

This MELCHIORRE ELC 800 7S was manufactured in 2000. It is a surface grinding machine featuring a maximum wheel diameter of 800mm. Consider the opportunity to buy this MELCHIORRE ELC 800 7S surface grinding machine. Contact us for more information.

This Euromac BX 1000/50 was manufactured in 2007. A robust and reliable choice for sheet metal operations, it ensures consistent performance. Consider the opportunity to buy this Euromac BX 1000/50 sheet metal machine. Contact us for more information.

This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. Its a robust option for efficient plastic processing tasks. Contact us for more information.

This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.

This Netstal EVOS 5500-2900 Speed was manufactured in 2013. Ideal for high-speed plastic processing, it ensures efficient operations with minimal downtime. A robust choice for your production needs. Contact us for more information.

An agitator, presumably from the manufacturer Stelzer, with an Emod motor is available. Agitator shaft: 70mm, operating tank volume: 200m³, operating medium: milk, motor power: 12.5kW, speed: 980rpm, power factor: 0.70. An on-site inspection is possible.

turning diameter: 220 mm Control: GE Fanuc 18i-TB x-travel: 400 mm z-travel: 450 mm tool taper: VDI 40 number of tool places: 12 Pos. spindle tunring speed: 6.000 U/min Number of working hours: 10741 h work stroke: 150 mm X-Achse EMAG VL5 vertical lathe, built in 2003, very good condition, ready for use, but currently not in operation. Accessories: Extraction system 9 tool holders, 4 of which are driven tools 1 pallet Various workpiece carriers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Spiral mixer Eberhardt - Type Maximat - with 2 stainless steel boilers - With stainless steel spiral - With 2 automatic timers - with 2 speeds

-Spiral mixer - Manufacturer: Enerhardt GmbH - Type: Maximat MAK N160 - with 2 speeds - With automatic timer - for max. 160kg dough

This AMADA ENSIS-3015 AJ Fiber Laser cutting machine was manufactured in the year 2021 in France and has 19829 production hours, of which 8457 are cutting hours. It is equipped with an AMADA AMNC3i control unit. The machine has a laser power of 6,3 kW.

Manufacturer: Engel Victory 330/80 Model:Victory 330/80 Year of Manufacture: 2006 Operating hours: 95257 Closing force: 80 t Screw diameter: 40 mm Max. injection volume: 154 cm3 Fixing plate: 670 x 600 mm Machine weight: 5.6 t Find more here - / Contact us at -

- Fixed table 950 x 450 mm - Feeds all direction - ISO-40 and 3kW - 3 Axis Digital Read Out Systsem - CE-Safety  - Coolant system with semi closed lower base 

This ELMAG UFM 125GT was manufactured in 2015. It features a universal milling machine with a spindle Morse taper ISO 40, and a table surface of 1,320 x 320 mm. The machine offers a vertical speed range of 45-1,660 f/p and a horizontal speed range of 40-1,300 f/p. Ideal for precise and versatile milling tasks. Contact us for more information about this machine.

This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine.

This 3-axis DECKEL MAHO DMU 50 evo was manufactured in 2001. It features an 18000 rpm spindle and a machine table measuring 800x480 mm. With travels of X: 500 mm, Y: 420 mm, and Z: 380 mm, this vertical machining center represents a robust opportunity for precision machining. Reach out for further details regarding this vertical machining center.

This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.

This Enshu ES450 was manufactured in 2004. It features a spindle speed of up to 12,000 min⁻¹, a tool storage capacity of 20, and a rapid traverse feed rate of 60,000 mm/min. The machine accommodates a maximum workpiece weight of 800 kg and offers a cutting feed rate of up to 15,000 mm/min. Consider the opportunity to buy this Enshu ES450 vertical machining centre. Contact us for more information.

This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine.

This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre.

This 5-axis ESPE LAVA CNC 500 was manufactured in 2008, designed for advanced dental technology. It features a standard disc diameter of 98mm, operates within a temperature range of 18 – 25°C, and maintains a sound level of 65 dB (A). Ideal for businesses aiming to enhance automation and productivity in milling operations. Contact us for more information about this machine.

This 3-axis Enshu WE30Ve was manufactured in 2016. A vertical machining centre designed for precision and efficiency, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Enshu WE30Ve machine we have for sale. Contact us for more information about this machine.

This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information.

This 3-axis NCT EmR-610M vertical machining center was manufactured in 2017. It features a 600mm X-axis, 400mm Y-axis, and 450mm Z-axis, with a high-speed capability of 30000 RPM and a HSK-E40 clamp. It also includes 21 tool slots. If you are looking to get high-quality milling capabilities, consider the NCT EmR-610M machine we have for sale. Contact us for more information.

This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information.

This 5-axis ESPE LAVA CNC 500 was manufactured in 2010, featuring a robust universal machining center design. It operates on a supply voltage of 200-240 V AC and supports a nominal output of 0.92-1.1 KW. The machine dimensions are 1090 mm in width, 1960 mm in height, and 840 mm in depth, weighing approximately 620 kg. If you are looking to get high-quality milling capabilities, consider the ESPE LAVA CNC 500 machine we have for sale. Contact us for more information.

bore capacity in steel (diameter): 50 mm throat: 350 mm bore stroke: 180 mm thread capacity: 35 M spindle taper MT: 4 MK column diameter: 150 mm bore spindle turning speed range: 132-1852 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DMG MORI DMC 635 V eco was manufactured in 2010. A vertical machining centre featuring a Heidenhain TNC 620 control, a 20-position SK40 tool magazine, and an internal cooling system at 12 bar. Ideal for precision machining with its direct measuring system for X, Y, Z axes. A great opportunity to buy this DMG MORI DMC 635 V eco vertical machining centre. Contact us for further details regarding this vertical machining centre.