e t used for sale

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 25,4 x 0,9 mm weight of the machine ca.: 0,4 t Dimensions (LxWxH): 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 105 mm capacity 90 degrees: square: 100 mm : 100 x 105 dimensions of saw-band: 1335 x 13 x 0,65 mm dimensions: 650 x 310 x 300 m band speed: 30 - 80 m/min total power requirement: 0,95 kW weight of the machine ca.: 18 kg Action Price Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60° Share of freight costs: EUR 25. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 5 - 160 A connected load frequency: 230 V weight: 7,9 kg Dimensions (LxWxH): 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage,  ...

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 150 kg Dimensions (LxWxH): 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,285 t dimensions: 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Erka dough machine Model: HK 30 for approx: max. 30 kg dough 2 courses Machine mobile with locking foot Connection 400V, 16A-CEE plug Machine You can find many more bakery machines with us.

was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II,, for raw meat,, designed to be mobile,, effective width: 400 mm,, feeding distance: 820 mm,, gradient: approx. 60° - length: approx. 3,800 mm,, Delivery height: approx. 2,500 mm,, Delivery distance: approx. 930 mm,, Lug width: 400mm, Stud height: 50mm, Cleat pitch: approx. 200mm, Hygienic version with central scaffold tube. The construction is very open. The belt is removed using round material. Drive and deflection stations are designed with sheet metal parts. In the lower run the, Belt worn by rollers. The conveyor is equipped with a quick clamping system. Thus, the belt can be lifted for cleaning or removed from the side. The belt is positively driven and, also forced, Support:, with rectangular tube support frame with castors, Product Tours:, Plastic profiles swiveling on both sides, Clear width = stud w ...

BATTERING-GLUING AND BREADING MACHINE, STEIN, MESH WIDHT 200MM Technical features: Battering-gluer: Material: Stainless steel Power supply: 380V-440 / 50-60Hz Battering-gluer dimensions: 1200 x 700 x 2000 mm Breader, Stein, model: E8J Serial number: 184 Bandwidht: 200 mm Dimensions: 2400 x 750 x 2000 mm

ENGINE PLAST GRANULATOR, type BA 1000.550.3, 75 kw drive, 12 mm screen (or bespoke), complete with loading belt, metal detector, sound proofed, blower to scrap silo of extrusion line, control cabinet, machine reconditioned with new knives, installed power Kw: 75

The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance unknown, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 kg, Power connection: 200-240V, network connection: Ethernet, software: EOS RP Tools (optional), EOSPRINT, laser: Yb-Fibre Laser 100W, scanner: High-speed scanner, F-Theta lens, scanning speed: up to 7.0  ...

A complete packaging and palletizing line for buckets is available. 1) Vollenda 2VNES2-6-E bucket filling machine, year of manufacture: 2009, bucket formats: 2kg-5kg, filling capacity 2kg/5kg: 1200/800 buckets/h. 2) Palletizer Ehcolo EPL 160, year of manufacture: 2009, empty pallet magazine positions: 15, max. pallet dimensions X/Y/Z: 800mm/1200mm/1500mm, palletizing capacity 2kg/5kg pails: 800/1200 pails/h. 3) Wrapping machine Robopac Rotoplat 3000HD, year of construction: 2009, max. rotation speed: 12 rpm, max. wrapping height: 2400mm, power: 11kW, weight: approx. 1400kg. Documentation available. On-site inspection is possible.

An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

Tunnel dimensions X/Y: 420mm/240mm, welding frame dimensions X/Y: 500mm/400mm, max. roll width: 600mm, max. product height: 150mm, tunnel length: 700mm, machine dimensions X/Y/Z: approx. 2400mm/900mm/1550mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.

Pallet dimensions X/Y: 1200mm/1200mm, max. pallet weight: approx. 2000kg, max. film width: 500mm, max. turntable speed: 10U-15rpm, power: 2.5kW. Documentation available. On-site inspection is possible.

A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspe ...

An ETT depalletizing machine is available. The machine is suitable for 0.1l small spirit bottles. Packaging capacity: 10000 bottles/h, pallet formats: 1000mm/1200mm, connected load: 3.5kW, compressed air: 6bar, air requirement: 14l/carton, machine dimensions X/Y/Z: approx. 1800mm/3000mm/2400mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.

Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible.

An Eickmeyer flat printing machine with parallel lifting upper frame is available. Printing format X/Y: 500mm/800mm, max. screen frame dimensions X/Y/Z: 1050mm/520mm/30mm, max. workpiece height: approx. 140mm, operating hours: approx. 50h. Documentation available. On-site inspection is possible.

Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible.

A screen printing machine ESC (Europa-Siebdruckmaschinen-Zentrum) overhauled in 2004 is available. Print format: 1000mm/1400mm, max. print material thickness: 7mm, max. screen frame dimensions X/Y: 1540mm/1800mm. Documentation available. On-site inspection is possible.

A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible.

Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible.

Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.

Air volume flow: 4500m³/h, max. negative pressure: 3400Pa, motor power: 4kW, filter area: 42m², number of filters: 3, machine dimensions X/Y/Z: approx. 2050mm/1050mm/2050mm, weight: approx. 350kg. Documentation available. On-site inspection is possible.

Speed: 3000/min, volume flow: 3.7m³/min, overpressure: 8bar, operating pressure: 4-13.5bar, oil capacity: 10l, connected load: 22kVA, length: 1500mm, width: 850mm, height: 1200mm, weight: 672kg. Including test certificates for the pressure vessels, speed-controlled with heat exchanger for heat recovery.

Two unused Allweiler and KSB pumps are available. 1) Thermal oil centrifugal pump Allweiler NIT 50-200U5 AW4, year of manufacture: 2023, flow rate: 40m³/h, delivery head: 54m, power: 7.4kW, speed: 2900rpm, pumped medium density: 0.75kg/dm³, viscosity: 1mm²/s, pipe diameter: 203mm. 2) Reconditioned cooling water pump KSB Etabloc, year of construction: 2021, flow rate: 26m³/h, delivery head: 15.5m, viscosity: 1mm²/s, speed: 2915rpm, MEI: 0.7, pipe diameter: 116mm. The KSB pump was overhauled in 2023. Documentation available. On-site inspection is possible.

pressure: - t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 t distance between columns: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.

Various gas forklift trucks, electric forklift trucks and electric high-lift trucks from various manufacturers are available. 1) Heli gas forklift truck, load capacity: 2500kg. 2) Heli gas forklift truck, load capacity: 2500kg. 3) Jungheinrich electric forklift truck, load capacity: 2000kg. 4) Jungheinrich electric high-lift pallet truck, load capacity: 1600kg. 5) Electric high-lift pallet truck Linde, load capacity: 2000kg. On-site inspection is possible.

power capacity: 50 / 65 kW volt: 220 V ampere: 181/230 A weight of the machine ca.: ? t dimensions of the machine ca.: ? m (passend für Kutter MEISSNER RSM 200) n 1460/2940 min-1, iP 23 Temperature sensor for motor protection + tropically insulated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: SK 40 collet diameter: - turning speed range: Maschinenabhängig U/min drive motor: Antrieb durch Maschine kW distance spindle - column: ca. 800 mm total power requirement: - kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 0,8 m No. 4896: Vertical milling head SK 40 Make COLLET + ENGELHARD, mod. BN 100 ( BFfb 85 / 110 ) Support bearing 2 set of bevel gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 650 kg fork length: 1150 mm stroke height: ß mm weight of the machine ca.: 250 KG dimensions of the machine ca.: 311,3 m No. 5130 Electric pallet truck / Automated guided vehicle FTF S-Electronics / LogisticJet Paleti / FTF Own weight approx. 250 kg Working area: Dimensions 2916 x 800 x 1220 Load capacity 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 400 mm grinding width: 250 mm workpiece height: 300 mm total power requirement: ? kW weight of the machine ca.: 2 t dimensions of the machine ca.: 222 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: max. 2250 m³/h : 2550 pa power capacity: 2,2 kW Suction- Tube: 250 mm Number of working hours: 1450 h power requirement: 2,2 kW Packing: ca. 1200 x 900 x 1600 mm Shipping weight: 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1200 kg fork length: 1150 mm height of stroke: 4550 mm voltage: 24 V accessories and equipment:: Batterieladegerät The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26 t punching cross-cut in cmm: 80 x 2,5 stroke: - mm total power requirement: 1,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,5 m No. 1096: Revolver hole punch 26 to. EDEL, type SMO 26/660/12 built 1973 with throat depth 660 mm Working area: diam. 80 x 2.5 mm Drive power: 1.5 kW Accessories: 12-station tool magazine Various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1400 kg fork length: 1150 mm stroke height: 3600 mm total power requirement: 1,3 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 212,5 m No. 5339 1 used electric pedestrian stacker 1400 kg / 24 V EX / PYROBAN System 5000 E / EX 3G Zone 2 with charger SLT 100 / 70 A Battery defective The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: Ø 340 / 340290 mm band length: 600 52 2,5 mm cutting lenght max.: x 600 mm total power requirement: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,52,51,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 913 kg 280030.XD7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6,2 t chamfer lenght: 285 mm mm distance between columns: 230 mm dayligth: 215 mm throat: 70 mm stroke: 100 mm working feed: 9,8 mm/sec return speed: 50 mm/sec quantity of oil: 10 l Control: DELEM DA 41T total power requirement: 0,7 kW weight of the machine ca.: 250 kg dimensions: 900 x 1300 x 550 mm • Basic version as a C-frame • Compact table model • Ideal for prototypes and small series • Very short setup time • Functionally simple • Wide range of applications • Low noise level • Low energy consumption • Easy handling including special equipment: - CNC control DELEM DA 41T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mm saw band length: 3375 mm cutting width: 350 mm dimensions of saw-band: 3375 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,8 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1200 kg fork length: 1150 mm stroke height: 3600 mm : 6,0 / 6,0 km/h : 600 mm : 2,2 kW : 620 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 bar liter capacity: 1400 m³ / min dimensions: 700 x 550 x 1100 mm total power requirement: 11 kW weight of the machine ca.: 275 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table width: 3000 mm table length: 1500 mm burner heads: 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERT with extraction system PFC-4 Plus 4kW F3800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.