e t used for sale

2013 Ibarmia ZVH 45/L1600 Extreme 4 axis vertical machining center Type: ZVH 45/L1600 Extreme Manufacturer: Ibarmia Year: 2013 Control: Fanuc X- 1600 mm Y- 800 mm Z- 900 mm Rotation angle +/-105° Maximum spindle speed 12000 rpm Number of tools in the magazine: 24 Work table dimensions: 2000 x 850 mm Included a wall that divides the table into two parts, so it is possible to machine separately in one part and clamp in the other part Machine in good condition, under power. Find more here - / Contact us at -

2019 Soft Energy Controls CES0007 Ranking machine End of line testing machine which sorts and grades cylindrical and prismatic battery cells. It is quite a specific piece of equipment, but it has some components that have value and could be repurposed in other machines. Originally from Japan. Main functions: DCIR testing and grading of cells Sorting of prismatic and cylindrical cells based on the cell grade into trays Find more here - / Contact us at -

2008 Shikoku Kakoki ELOPAK S-PS80HA & 2011 OYSTAR A+F Traypacker Elopak US80 filling line - filler - to packer Model: ELOPAK S-PS80HA Manufarcturer: Shikoku Kakoki Year: 2008 Applicator: 3x PLA-S30 Einpacker: OYSTAR A+F Traypacker Year of construction 2011 The machine has a capacity of 8,000 pkg/h Fruit juice and iced teas were bottled on this line in Diamond Curve 0.5 l, 0.75 l and 1 l gable-top packs Find more here - / Contact us at -

LWA (Laurijsen WeegAutomaten) Atoma E233 Technical data Construction data: Machine type : Atoma E233 Weighing range : Weighing speed : up to 15 weighings per minute The following products can be processed on the automatic weighing machine: General dimensions: Overall dimensions W x D x H : 2,000 mm x 650 mm x 1,100 mm Total weight: approx. 500 kg Required power supply: Supply voltage : 230 V alternating current Control voltage : 24 V direct current Operating pressure : 4 to 6 bar Protection class : IP 65 Mains earthing : for example TN system Frequency : 50 Hz +/- 1 % continuous operation +/- 2 % short time Physical operating conditions: Ambient temperature, in operation : +10 to +40 degrees Celsius Relative humidity (RH) : 30% to 85%, non-condensing Lighting : normal ambient lighting. Altitude : up to a maximum of 1000 metres above sea level. Find more here - / C ...

2016 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - / Contact us at -

1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - / Contact us at -

Machine type : Flame cutting system Manufacturer: ESAB Model : SXE-P1 4500 RH Year of manufacture : 1999 Dimensions, Weights, and Power Supply: - Track Height: 500 mm - Track Length: 14,000 mm - Cutting Length: 12,000 mm - Cutting Thickness: 150 mm - Machine Height: 1,900 mm - Machine Length: 2,250 mm - Height of Cutting Table: 700 mm - Machine Width: 5,270 mm - Cutting Width: 3,000 mm - Maximum Machine Speed: 12,000 mm/min - Machine Weight: 2,500 kg - Maximum Number of Single Torches: 2 x 381 + 1 - Fuel Gas: Acetylene - Voltage: 230 V / 50 Hz - Power Consumption: 2 KVA Find more here - / Contact us at -

Manufacturer: EKRA Model: X4 PROF Weight: 920 kg Year of Manufacture: 2008 Nominal Voltage: 230 V AC Frequency: 50/60 Hz Working Voltage: 24 V DC Number of Phases: 1 Power: 1.2 kW Circuit Breakers: 16 A Pressure: 6 bar Maintenance status: Machine is not currently serviced, but is fully functional Operating hours: unfortunately no counter in the system; machine has been running on average in 1-shift operation since the beginning of 2008 Accessories: 2x squeegee 220mm, 65°; 2x squeegee 350mm, 65°; 2x squeegee 350mm, 45°; 2x squeegee 450mm, 65°; 2 support plates 275mm Documentation: complete system manual in paper form Operating system: WIN XP Software version: SCBDRV V6.11-2 Find more here - / Contact us at -

Manufacturer: OKUMA Model : Eurocenter V50 Year of construction : 2007 Operating hours: 11465 Accessories: dividing head, coolant tank with pump. Voltage: 400 V Phases: 3 Phase Frequency: 50 Hz Current: 28 A Power: 32 kW Fuse Rating: 45 A Certification: CE marked Find more here - / Contact us at -

CNC vertical lathe Type: VL 5i F Manufacturer: Emag Year: 2016 number of axes : 2 max clearance diameter : 250 mm max part diameter : 220 mm machining height : 175 mm strokes (X/Z) : 660 / 300 mm quick feed (X/Z) : 60 / 30 m/min turret number of positions : 12 tool-holder : VDI40 spindle power : 28 /18 kW speed : 0 to 4.500 rpm index precision C axis : 0,001° part magazine capacity diameter 30 to 85 mm : 37 pos.,max 4.5 kg part magazine capacity diameter 30 to 160 mm : 22 pos.,max 8 kg part magazine capacity diameter 80 to 220 mm : 16 pos.,max 10 kg part height max : 175 mm voltage : 400 V installed power : 36 kW dimensions floor space: 2266 x 4184 mm height : 3200 mm weight : 7.500 kg Chip conveyor Machine in good condition, under power Find more here - / Contact us at -

Type of Machine: Bar Machining Center Condition: Used Year of Manufacture: 2008 Power Supply: 3-Phase, 400 V, 50/60 Hz Current: 24 A Compressed Air Requirement: 6 bar Processing Speed: 21,000 1/min (RPM) Find more here - / Contact us at -

Manufacturer: Elumatec Type: SLK118/00 Year of Manufacture: September 2008 Type of Machine: CNC Profile Milling Machine (Template-Free Copy Milling Machine) Find more here - / Contact us at -

AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper-aluminum Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw

Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw

Full Gang Esterer Hdn 600 Passed 710 Stroke 600 Hydraulic Saw Spander Fully Hydraulic Chip Wagon Auxiliary Wagon Splitting Wedge Cape Saw

Hackeranlage hacker Rudnick Enners 500 200 motor 45kw 500mm 200mm vibrorynne detecktor metau scratch conveyor technology

engine: 2,8 KW weight of the machine ca.: 320 kg dimensions of the machine ca.: 86 x 90 x 85 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a Krones Ergomatic labeller in mint condition. The system can be used for large, small and small glass, as well as bottles. Top condition. Is given away inexpensively.

AIRCOOLED CHILLER EMICON ERAH 8120 MC VS HE KE 785 KW Cooling capacity: 785 kW / 223.2 tons (12/7 — 35°C) EER: 3.02 Refrigerant circuit: 2 pcs. Heat exchanger: Shell-and-tube Bitzer SQDS4010214-CE Condenser: Microchannel Type of refrigerant: R513А Compressors: 2 pcs. Bitzer CSVH25-160Y-40A (Inverter screw) Number of fans: 14 psc. Dimensions: 8,5 х 2,33 х 2,64 m. Weight: 6190 kg. Working hours: 0/0 h. Condition: Never used, new

FANUC O1 Machine length : 1350 mm Machine width : 2760 mm Machine height : 2615 mm Machine weight : 3500 kg Control unit: Enac-I Spindle speed range : 10000 1/min Spindle motor power : 7.5 kW X-axis travel : 500 mm Y-axis travel : 400 + 210 mm Travel of the Z-axis : 300 + 80 mm Maximum table load: 500 kg Table dimensions: 700 mm x 400 mm

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Manufacturer: Butler Model: Elgamill TE 4000 Condition: Used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 4340 × 1000 Table Size: 1000 × 1000 Control System: Siemens 810 M Spindle Hub: 480 × 360 Tool Holder Spaces: 130 Travel (X, Y, Z): 4000 × 1600 × 1000 Max Weight: 10500 kg Find more here - / Contact us at -

Manufacturer: EDEL Model: CM800 MT . Year of construction: 03/2020 Spindle running time: 3,469 h Spindle torque: 253NM / 12,000min-1 / HSK 63 Travel distances: 800/900/620mm Control: Heidenhein TNC 640 Rotary function: 4,000Nm / 750rpm / Drm 800mm / max. 2,000kg Pallet changer: 6-way; pallet weight max 1 ton (pallet + workpiece) Tool changer: 60 places (expandable to 120 places) Find more here - / Contact us at -

Measuring tripod - heavy duty version Measuring height 290 mm Measuring range transverse arm 260 mm Diameter of measuring column 40 mm Cross arm diameter 28 mm Base plate 500 x 235 mm Base plate thickness 35 mm Weight approx. 38 kg

Van Rietschoten & Houwens 430-301E Exhaust Gas Averager

Manufacturer: Econo-Pak Type: FA-KT Year of Make: 2003 Condition: good Inclusive: - 1-head folding carton display WVE-DR-R Hotmelt (2 adhesive spots) - Angle capper - SIMATIC OP7 HMI - Nordson Hotmelt 3400V-2GAV4D/R Hot Melt Machine incl. Hand Glue Gun - Handheld control unit - Videojet 2-line for coding - 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm WITHOUT checkweigher Folding carton conveyors

press capacity: 2250 kN quantity of oil: 400 l : DNC 1200PS Eco/Col weight of the machine ca.: ca. 15.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . : . : . Electric air purifier The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis EXCELLO XHC 241 M/3 was manufactured in 2003. It features a maximum spindle speed of 16,000 RPM and a 500 mm pallet with a maximum load of 400 kg. The machine is equipped with a 120 station automatic tool changer and offers rapid traverse rates of up to 120 mm/min. If you are looking to get high-quality machining capabilities, consider the EXCELLO XHC 241 M/3 horizontal machining centre we have for sale. Contact us for further details.

CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details.

Working hours ca 1000 !

Eberhardt Universal Round and long mould Year of construction 2003 Siemens Simatic control system Height: 150cm Width: 80cm Depth: 100cm

FOAMplus EZ100 foam packaging system was built in 2014 in Germany by Storopack Deutschland GmbH + Co.KG. The machine is designed for the production of lightweight and durable protective packaging that effectively protect products during transport. These elements are produced directly at the packaging station by using polyurethane foam. STOROPACK FOAMplus produces the foam by mixing two chemical components. The chemical components A” and B” are taken from the barrels by means of two electric pumps and further transported by flexible hoses to the dispenser. After application, the material increases in volume by up to 250 times, precisely adapting to the shape of the product to be protected. The operation of the machine is managed by a microprocessor control system with an easy-to-read LCD display, which is responsible for controlling the most important parameters and ensuring safe oper ...

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round blade, electrically oscillating knife and a milling machine (incl. suction device) • Multifunction tool head for holding up to 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universa ...

- Max. print width 745mm (750mm with register marks) - Material width: 760 mm - Non-Stop Martin Automation unwinder and rewinder - Fully servo driven - Speed 400 m/min - Water cooled - Chilled rollers - 6 x offset printing units - 2 x Flexo printing units - UV drying - Cold foil embossing - Inline laminating unit - Reverse printing (mirror-inverted printing) - Backside printing with 1-2 Colors - Minimum material thickness: 12my - Maximum material thickness: 600g/m2 - Materials that can be printed: paper, BOPP, PET and ALU - Min. actual thickness for foils and aluminum: 12my - Current production: Flexpack, aluminum composite (paper + aluminum) laminated; 12my PET films; Reverse printing (mirror-inverted printing)