e t used for sale

turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m

Key data: 3000 kN, 3268 g/PS, 100 mm

LX300 PET P100/120 E100 in production 48 cavities year 1996 exworks south america Auxiliaries included Plastic Systems resin dryer model DR224HT Throughput 800 kg/h Silo capacity 7 ton Radial vacuum pump Mold dehumidifier Piovan model RPA 2400 Conveying system TEC 24X2X10.4

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

Key data: 280 kN, 30 mm

Injection moulding machine ENGEL Victory 200-28 Tech Stock No.: 503562 Manufacturer: ENGEL Type: Victory 200-28 Tech Hours: 31150 Control: CC200 Year of Make: 2011 Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 135 cc Spray pressure: 1065 bar Screw length: 17 l/d Screw stroke: 140 mm Screw speed: 480 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Equipment Screen text German Levelling elements Technic ...

A renovated extrusion recycling brand EREMA INTAREMA 1310 TVEplus for processing polyethylene (PE) and polypropylene (PP), polystyrene (PS), with laser filter and screen changer, degassing for processing printed films. Output up to 850 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Financing possible without personal liability. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +0049 1577 5329827

A renovated extrusion recycling brand EREMA INTAREMA 1310 TVEplus for processing polyethylene (PE) and polypropylene (PP), polystyrene (PS), with laser filter and screen changer, degassing for processing printed films. Output up to 850 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Financing possible without personal liability. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +0049 1577 5329827

Alsthom gecalsthom RX130HR1108 + encoder parvex TBN203R100

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.

This 3-axis Tacchella Macchine Elektra 513 MPC was manufactured in 2000. It features a grinding diameter of 406 mm and a tips height of 130 mm, with a distance to points of 750 mm. The machine is designed for precision and durability, with a protection class of IP 54. If you are looking to get high-quality cylindrical grinding capabilities, consider the Tacchella Macchine Elektra 513 MPC machine we have for sale. Contact us for further details.

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Work piece handling system manufactured in 2011. This LANG Eco-Tower + Lang Eco-Feed features a total height of 3192 mm when installed and a load capacity of at least 750 kg. The Eco-Tower has dimensions of 280 x 150 x 180 cm, while the Eco-Feed measures 250 x 70 x 130 cm. If you are looking to get high-quality handling capabilities, consider the LANG Eco-Tower + Lang Eco-Feed system we have for sale. Contact us for further details.

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Manufacturer: Blum, Type: Einbohrgerät für Topfbänder, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of spindles: 3,

Manufacturer: Homag, Type: Eingabeeinheit mit LCD Anzeige und Tastatur, Model: 2-083-02-7107, Serial number: 2-083-02-7208, SN number: 2-083-02-7106, Year: 1992, Year :1992

saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Thorwesten, Type: SAM 90 NC Eckenputzautomat, Year: 1994, Control: Programm, Single-head automatic trimmer: yes, CNC axes: X und Y Achsen, Number of tools: 3, Min.-max. casement profile height in mm: 100, Workpiece feed automatic: no, Wendestation: yes, Year :1994

Inv. Num. : 8281 Type: KTVF 55x3/1500 Producer: BC ECO TECH Created: 2010 Parameters: Capacity: 200 kg/h Maximum number of film layers: 3

- Filter surface area: 3m2 - Evacuation: manual Equipment : - Control window with inlet and outlet lighting - Circulation pump - Adjustable dosing pump - Agitator - Connection: butterfly valves, Friedrich n°2 40 Dimensions : - Length: 1750 mm - Width: 700 mm - Height: 1000 mm - In working order

dishwasher for dishes, Electrolux ELE 506065 type EPPWEASMS, 400 V, 13.5 kW BJ 2018, basket size 50×50 cm, automatic lowering and raising of the hood, 3 washing programs and 1 x continuous washing, self-cleaning cycle, digital display, electrical preparation for automatic washing Washing-up liquid – rinse aid dispenser, original price €17286.00 Dimensions 83x89x176 cm, minus 35% discount

A complete Ernst Nagel brochure machine is sold Composed of Foldnak 8 SP Plus Online Trimmer Machine is used and fully functional. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded Price is net, VAT can be claimed.

charge load: 135 liter : 1220 mm tank diameter / tank height: 1.220 / 1035 mm : 304 mm motor capacity: 0,75 kW motor speeds:: 1500 U/min voltage: 400 V weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 - Machine ON: 44.854 h - Heat unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length as well as motorized angle adjustment inwards and outwards Moving roller conveyor Material support Minimum quantity spraying device Weight: 1800 kg

Equipments: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Size: 520 x 740 mm Equipments: suitable for Heidelberg, Komori, KBA, Manroland, Ryobi, Sakurai as is Easy installation and removal

Elma Troyan motor Type: T 100LA 8/4 CB B14F 130-481 380 volt 0,7/1,1 kW 700/1415 rpm

Type: T 132H 4B 220/380V 7,5 kW 1445 rpm

Koppens Batter Enrober Model TD600 Tempura /hold down enrober With upgraded control panel and mesh belt

turning diameter over bed: 50 mm spindle passage: 26 mm turning length: 275 mm total power requirement: 12 kW weight of the machine ca.: 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,41 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with ...

DEFROSTER-MIXER FOR VEGETABLES WITH ROTARY DRUM, MECALSA, TYPE: MC ESC TRL Technical description: Heating: Direct steam Voltage: 380/440V Frequency: 50/60 Hz

A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.

Several roller conveyors are available for washing baskets that were set up in a low-dust production area. Wash basket width: 500mm. Single pieces without drive. Including swivel table. The roller conveyors are ready for collection.

saw blade diameter: 275 - 315 mm cutting diameter: 80 - 102 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 1, 5 x 2 m No. 5230 Cold circular saw with additional gearbox for 4 speeds EISELE VMS II - S - PV ( Typ-Nr. 421 ) Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence) Weight approx. 400 kg Working range: Ø 80-102 /flat 160x75/82 Drive: 1,4/1,9 Feed - roller conveyor approx. 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Upstroke press Top lid can tilt open to allow mould to be (un)loaded Capacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm

Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible.

sheet width: 1050 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,40 t dimensions of the machine ca.: m - Shear angle adjustment - Motorized backgauge up to 1000 mm with fine adjustment via handwheel - Sharpened blades - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GAS BOILER 16MT Design pressure:18 Max working pressure:17 Test pressure:23.4 Operating water volume 25,400 Design code:TRD Manufacturing date:2013 Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Muhd Syahir (mhd_syahir@topglove.com.my) Nik Faris (nik_faris@topglove.com.my) Incoterm: EX WORK Currency: USD

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1150 mm Control: 840 D Powerline tool taper: HSK-A63 table-size: 3000 x 2500 mm turning speeds: 16000 U/min total power requirement: 60 kW weight of the machine ca.: 50 t dimensions of the machine ca.: m - 5-Axis-Fräsmachine - max. rpm: 16.000 - X-Way: 3000 mm - Y-Weg: 2500 mm - Z-Way: 1150 mm - A-Axis: +/- : 100 mm - C-Axis: +/- : 181,5 mm - Tabelsize: 3000 mm x 2500 mm - option: Blowing air outside - kinematics: Clevis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Empak closing / capping machine, type TZZ.

An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.

EWD - GILLET log bandsaw line with canter and double-cut, - Heavy duty log loading deck, - EWD hydraulic log carriage, type EW 1000, - GILLET canter, type SL, - GILLET bandsaw machine, type TO1600, - Outfeed conveyor, - Control unit with Mudata controller

A semi-automatic tubular bag processing and sealing station RCM Engineering GmbH is available. Belt width: 108mm, machine dimensions X/Y/Z: approx. 520mm/310mm/450mm, weight: approx. 45kg. Documentation available. On-site inspection is possible.

A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.

GUILLOTINE REEL-SLITTER, for paper and plastic reels, complete with back hydraulic ram, ram running length: 244 cm + 135 cm piston (space taken from the ram piston), working width 1.160 mm, working height 950 mm, n.2 pistons, hydraulic pack 580 Bar, cutting force : 45 Ton, installed power 15 kw, the machine is offered reconditioned with sworn appraisal, compliant to CE safety rules, availability: 4 weeks, conditions: reconditioned, installed power - used power in work: about 60-65% : 15, working width: 1.160 mm.

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...

Watercooled chiller Trane ECGWN207BA2D11DC 251.7 kW Cooling capacity: 251.7 kW / 71.57 tons (12/7 — 35°C) Year of manufacture: 2010 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Danfoss CSHN250K0AK0 (scroll) Type of refrigerant: R410a Dimensions: 2.54x0.88x1.84 m. Weight: 1420 kg. Working hours: 34500/34500/34500/34500 h. Condition: Good

2000 litre process vessel Manufacturer: TSA Process Equipment WFI Containers NEW in original packaging Year of construction 2020 electro-polished Double-jacket, pressure-resistant Operating temperature product room 130 °C Operating temperature sheath 170 °C Accessories

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Emerson Macchine Torino Type: Carrera 700 Year of Make: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y stroke: 1,000 x 290 mm • Stroke of the Z-table: 400 mm • Distance from spindle table: 140 - 540 mm • Distance from spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver •Transmission • Horizontal spindle • Automatic feeds on the axles • Automatic spindle descent •Chiller � ...