e p used for sale

ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

Stainless steel tank, stainless steel tank, separator, filter tank, for plastic injection molding machine -Stainless steel tank: separator -Diameter: see photos -Reservoir: with sight glass -Total dimensions: Ø 248 x 435 mm -Weight: 17kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Still, charger Belatron type E 24/90 eco EU -Input voltage: 220 V 50 Hz -Power: 25.2 V/90 A -Dimensions: 550/410/H780 mm -Weight: 94 kg

Eillert G1500 belt slicer stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph

feed pressure: 10 bar Effective free air delivery: 252 L/min Receiver capacity: 90 l / bar Number of cylinders: 1 Stk. motor: 400Volt / 1,5KW V / KW turning speeds: 777 U/min weight of the machine ca.: 70 kg. range L-W-H: 0,97 x 0,5 x 0,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching tool for EUROLINE 700 Used, Great condition Punching tool for bolt holder Table width 700mmm Ghost 4-r approx. 16 x 18 Easter chicks 4-r approx. 15 x 16 Heart 5-r approx. 11 x 11cm Boots 4-r approx. 14 x 18cm Moose 4-r approx. 17 x 15cm

x-travel: 19000 mm y-travel: 7600 mm z-travel: 2000 mm w-axis: 5000 mm table surface area: 18500 x 5000 mm table load: max. 500 t distance between columns: 5500 mm power capacity - milling spindle: 110 kW tool taper: CAT #60 Control: FANUC 15i MB total power requirement: - kW weight of the machine ca.: 650 t Overhauled & modernized in 2007 equipped with: - CNC control FANUC 15i MB - 5 heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roller chain, drive chain -per package: Length: 5 m -Size reinforced: 16B-1 1-way 1 x 17.02 -Quantity: 23 x pieces packages available -Price: per package -Package weight: 14 kg/piece

Proximity switch, proximity sensor, position switch, socket cable -Manufacturer: Festo, socket cable ovp -Type: 30935 E413 -Voltage: 24V -Dimensions packaging: Ø 180 x 20 mm -Weight: 0.2 Kg

Inductive sensor, electronic sensor, sensor cable, connection cable, link cable -Manufacturer: ifm, Connection cable, sensor cable, original packaging -Type: E10662 -Quantity: 1 cable available -Packaging dimensions: 200/160/H30 mm -Weight: 0.2 kg

Surveillance camera, video surveillance, receiver, transmitter, video transmitter, transmitter amplifier -Manufacturer: Ernitec, transmitter type BVT-65 orig -Voltage: 230VAC / 50-60Hz -Number: 3x transmitter available -Price per piece -Dimensions packaging: 180/130/H60 mm -Weight: 0.5 kg/pcs

Muffler, exhaust system, muffler, silencer, muffler -Manufacturer: Eberspaecher -Type: 029 691 18 45 481 06 -Dimensions: see photos -Number: 2x silencers available -Price per piece -Total dimensions: 560/230/H130 mm -Weight: 6.2 kg

5 power dimmers 5 Regulator Photo on request Picture on request

Abrasive paper, emery paper, abrasive cloth, abrasive discs, abrasive bodies -Manufacturer: Tyrolit, grinding wheel 200x120x51.A170x80 unused original packaging -Type: SK-140499B.EOOB -Number: 3x grinding wheel available -Price per piece -Dimensions Ø 200 x 120 mm -Weight: 3.3 kg

T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...

Stuffing machine Eberhardt 5 x 7 Kaiserstüpfler, star rolls with 5 stud boxes Machine mobile Connection 400V, 16A-CEE plug Machine Many more bakery machines in stock!

MR Etikettiertechnik model MR 413 self-adhesive labelling machine for vials, bottles, etc., suitable for round containers with a diameter of up to 80 mm, label height up to 150 mm, reel core diameter 76 mm, maximum outer reel diameter 350 mm, label press-on belt with a height of 150 mm, Open Date 53S thermal transfer printer for printing the variable data (expiry date, batch no., etc.) on the label with PCE Mini Smart camera system for the print verification, PCE pharmacode control, label presence control, reject of faulty vials/bottles when code and/or print are not valid or label is missing, electrics 230V/50Hz/2500W, compressed air max. 6 bar, includes Blume bottle infeed & outfeed table with a diameter of 1500 mm, required floor space including rotary tables approx. 6000 x 2300 mm (LxW), max. height approx. 1800 mm

Dear Ladies and Gentlemen, We have the following machine to offer: OKUMA EUROCENTER V50 Year of Make: 2002 Control: OSP U10M Machine hours (spindle running time): 18,074 Without vises and chuck

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pallet stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Engine brake: Type IQ BFK458-10E -Wheel: 230 x 082 mm -Dimensions: 300/210/H650 mm -Weight: 64 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pedestrian stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Motor brake: Type IQ BFK458-10E -Wheel: Type 1537 -Dimensions: 300/270/H650 mm -Weight: 65kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 140/130/H360 mm -Weight: 7.5 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 7.5 kg

Tiller head, pedestrian stacker, pedestrian pallet truck -Manufacturer: Jungheinrich, tiller head complete from pedestrian stacker type ERC 205 -Number: 2x tiller head available -Price per piece -Dimensions: 700/500/H180 mm -Weight: 10 kg/pc.

Control, control part, interface -Manufacturer: Jungheinrich, control from pedestrian stacker ERC 205 -Type: MP 1510C/6 -Mat no.: 50313640 -Voltage: 24V -Number: 1x control unit available -Price per piece -Dimensions: 245/190/H140 mm -Weight: 3.9 kg/pc.

Chassis, support wheel, swivel wheel -Manufacturer: Jungheinrich, chassis support wheel swivel wheel from pallet stacker type: ERC 205 -Wheel size: 140 x 54 Type GF106-G3 2.0 kW -Dimensions: 240/190/H280 mm -Weight: 16.6 kg

clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 300 x 300 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 76A fuse protection (incl. peripherals) - Pump output: 7.5 kW, 14.9 A - Total output: 28 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Weight approx.: 2,250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control, control part, interface -Manufacturer: Jungheinrich, control from order picking stacker type: ECE 20 built in 2002/2003 -Type: MP 1510 interface 2 50053044-6/99 -Voltage: 24 V -Quantity: 2 pieces available -Price: per piece -Dimensions: 170/135/H70 mm -Weight: 0.7 kg/pc.

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering -Manufacturer: Jungheinrich, tiller head / tiller complete from pedestrian stacker type EJE-KmS -Number: 2x drawbar available -Price per piece -Dimensions: 1050/510/H220 mm -Weight: 20 kg/pc.

with compressed air accumulator 120 ltr, few operating hours

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar completely from ECC 10 electric pallet truck -Individual components: see photos -Delivery/price: complete -Dimensions: 1340/500/H150 mm -Weight: 28 kg

FOOD-TECH/ E044/ 2016 Blanching machine for carrots etc. 20 tons/h used, sold as it is, where it is, price ex location used, sold as it is, where it is, price ex location

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich electric forklift -Type: GNM5460E-G18 -Motor: 24V/240W -Dimensions: 150/130/H365 mm -Weight: 7 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic reservoir: from Butler 1200 pallet jack -Contents: approx. 11 liters -Additional parts: see photos -Dimensions: Ø 210 x 580 mm -Weight: 11 kg

One used mesh turning and stacking unit from EVG T6 D

Key data: 800 mm, 650 mm, 550 mm

Machine Details Stock-No. 1105-04022 Type of machine Machining Center - Universal Make DMG LID MAHO Type DMU 80 eVolution LINEAR Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 800 mm Y-Travel 650 mm Z-Travel 550 mm control iTNC 530 Heidenhain distance spindle nose and table 150 - 700 mm Turning Speed Range - Main Spindle max. 18,000 min/-1 Power capacity - main spindle 35 / 25 kW max. torque 130 Nm tool taper HSK table surface area 800 x 700 mm max. table load 600 kg rotatable C: 360° Swivel range B: -5 / -110 ° number of toolpositions 120 pos. tool taper HSK 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip-to-chip approx. 5.9 sec F ...

Surface Grinding ERNAULT SOMUA FU 660 Travel X: 660 mm Travel Y: 400 mm Travel Z: 400 mm Magnetic chuck BRAILLON 700 x 300 mm Grinding wheel: Ø 355 mm Motor power: 7,5 CV Swivel head Automatic diamond cutting Auto stepover X - Y - Z Lubricant tank Hydraulic Group Voltage: 220 V Tri Length: 2900 mm Depth: 2000 mm Total height: 2200 mm Weight: approx 4,5 T

Safety switch, safety switch, TZ -Manufacturer: Euchner, safety switch type NZ1VZ-538E-M -AC-12 4A 230V -AC-15 6A 230V -DC-13 6A 24V -Protection class: IP 67 -Number: 1x available -Price per piece -Dimensions: 140/40/40mm -Weight: 0.3 kg/pc.

Chiller Make: SYSTEMAIR Type: SYSCROLL 170 AIR EVO PH Power: 170 kW – cooling and heating Electrical. Power: 77 kW/150A Refrigerant: R410A Weight: 1,385 kg Year of Make: 2014 4 pcs compressor Make: Copeland Scroll Type: ZP182KCE-TFD-455 Volume: 35.1 m³/h Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Stock # U2439-2 Used Erweka (DE) multi-task lab size set with drive AR400. Unit is driven by el motor 0.5 kW, 3000 rpm, 220 V, 50 Hz. Output rotation adjustable in range from 0-400 rpm. As a set there are included: - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Including electrically heated mixing pan type DER. El heater power 500 W. Total volume of mixing pan about 6,5 l. - single piston homogeniser type HO with stainless steel electrically heated product hopper with volume about 2.8 l. Additional stainless steel hopper with volume about 3 l, and bypass stainless steel pipe. Output up to 30 kg/h. - Stainless steel vertical jacketed mixing tank type SG3W with belt driven 3 level paddle agitator. Bottom discharge. Total volume about 5 l. All devices last time had been working in cosmetic industry.

Stock# U2439-3 Used Erweka (DE) multi task lab size set with drive AMD/EX. Unit is driven by el motor 0.37 kW, 920 rpm, 380 V, 50 hz. Ex design and is equipped with vari speed gearbox. Output rotation adjustable in range from 46-410 rpm. As a set there are included: - stainless steel three roll mill type SMS - rolls with width 107 mm x diameter 50 mm. Output in range 2-20 kg/h. - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Total volume of mixing pan about 6l. - single piston homogeniser type HO with stainless steel product hopper with volume about 3 l. Output up to 30 kg/h. - universal drive arm type UG with device for mounting ceramic ball mill type KM 0, mill volume 0.5 l, includes ceramic milling balls. All devices last time had been working in cosmetic industry.

ID3347 MTU 660 KVA Electric generator year/Baujahr 2000 approx. 150 hours/Stunden (accord. Counter MTU generator with 660 kVA, complete, MTU diesel engine type 12V 2000 G22 (565 KW) MTU genset with 660 kVA, complete, MTU diesel engine type 12V 2000 G22 (565 KW)

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module from CNC machining center Santenberg GTC S 2 -Type: EMB9352-E -Input: DC 725V Imax = 25A -Output: Pav= 19 kW Ppk = 32 kW -Quantity: 1x brake module available -Dimensions: 55/380/H185 mm -Weight: 2.3 kg

Fan filter, fan line, air cooler, control cabinet fan, filter fan -Manufacturer ebm Santenberg: Filter fan from CNC machining center Santenberg GTC S 2 -Engine: Type ebm W2G130-AA33-26 -Voltage: 24V/14/16W -Dimensions: 255/255/H115 mm -Weight: 1.4 kg

Safety relay, safety control unit, emergency stop switch -Manufacturer: Moeller, safety relays -Type: ESR4-NV3-30 -Quantity: 1x relay available -Dimensions: 95/25/H115 mm -Weight: 0.2 kg

Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

Erlo S-18 used desktop drill. With base. Drilling capacity: 18mm. Tapping capacity: M14. Table: 270x270mm. Cone: CM3. Speeds: 245-4000rpm. Motor: 1,4cv. CE. Year: 2005. Weight: 250Kgs.

Erlo TCA-60 used column drilling machine. Drilling capacity: 60mm. Cross table of 700mm. CE certificate for used machines

Iba-E35 used column drilling machine. Drilling capacity: 35mm. Table: 525x525mm. 9 speeds. (70-1406rpm). CE certificate for european used machines.