e p used for sale

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: 16 mm -Protection class: IP 44 -Brake: 220 V -Number: 8x motors available -Price: per piece -Weight: 15 kg

SEW Eurodrive KHF67/R DV132S4/BMG/TH/VR/AV1H Geared Motor 230/400 V 1430/135 r/min 390 Nm Weight: 90.5 kg More centrifugal pumps new and used - you can find them in our shop! International shipping costs on request!

Selling Proposal  DESIGNATION REFERENCE QUANTITIES SIEMENS SIMATIC S7-300 PLC 1 SIEMENS SM321 4 I/O BOARD SIEMENS SM322 I/O BOARD 4 FUSE DISCONNECT SWITCH WOHNER LTS-2 3 FUSE DISCONNECT SWITCH WOHNER LTS-000 3 VOLTAGE REGULATOR ROWAN ELETTRONICA 310 S.C/6M 3 EMERSON SP 1406 25 DRIVE EMERSON SP 2401 2 DRIVE

Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW

cutting diameter: 320 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 320 x 320 mm capacity 45 degrees: square: 180 x 180 mm strokes per minute: 40 - 57 - 80 - 115 1/min cutting speed: 16 - 22 - 31 - 45 m/min dimensions of saw-blade: 575 x 55 x 2,5 mm total power requirement: 3 kW weight of the machine ca.: 700 kg dimensions of machine L x W x H: 1,55 x 0,70 x 0,98 m - with mitre cutting Accessories: coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spreading spindle, textile goods feeding device -Original husband spare part -for husband Rolex machines and others -Diameter: 50 mm -Length: 1540 mm -3 common -Weight: 8 kg

Spreading spindle, textile goods feeding device -Original Ehemann spare part -for Ehemann Rolex machines and others -Diameter: 50 mm -Length: 1266 mm -3 common -Weight: 6 kg

Spreading spindle, textile goods feeding device -Original Ehemann spare part -for: Ehemann Rolex machines and others -Diameter: 50 mm -Length: 2570 mm -6 common -Weight: 24 kg

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Toothed shaft holder: Ø 25 mm -Length: 25 mm -universal applicable -Number: 2x motors available -Price: per piece -Dimensions: 290/160/H160 mm -Weight: 13.5 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 60 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 365/150/H150 mm -Weight: 23 kg

Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2200 mm

Gear motor, electric motor -Speed: 46 rpm -Power: 1.5 kW -Construction: B3 angle -Shaft diameter: Ø 30 mm -Protection class: IP 54 -with: external fan -Dimensions: 590/250/H200 mm -Weight: 40 kg

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

Gear motor, electric motor, electric gear motor -Speed: 10 rpm -Power: 0.15 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Brake -Dimensions: 420/265/H160 mm -Weight: 14.8 kg

Gear motor, electric motor -Transfer in current condition as seen -Foot is broken on one side -Speed: 9 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 410/190/H155 mm -Weight: 16 kg

The ENR series are air-cooled chillers for industrial use for outdoor and indoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Cooling capacity 13.5 Kw We have a lot of chillers available directly from stock used and new. contact us for a non-binding offer.

Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,

Dissolver Vollrath EWFX 60 Power 44 kW Speed range 200-1200 1/min Double-toothed pulley with wall scraper as good as new control cabinet with FU Very good condition, straight from production

Geared motor, electric motor, three-phase motor -Speed: 87/106 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Number: 6x motors available -Price: per piece -Dimensions: 370/188/H155 mm -Weight: 9.5 kg

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 270 x 105 x H 65 mm -Connection: 24 V DC 2x6 W -Number: 1x lights available -Price: per piece -Weight: 8 kg/piece

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Jungheinrich EFG216 Forklift truck Serial: FN319410 2005, Electric forklift, max lift 1500Kgs, treble mast

Perfect binder Eurotecnica 425 Year of construction 2002 Art.Nr. PS6041

Nominal power in kilowatts: 7,7 MW Maximum power: 8,47 MW Nominal turning speed: 1150 1/min Maximum turning speed: 2200 1/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm 8 MW test bench for gears, closed loop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Transport roller width: 430 mm -Admission: 2-sided 15 mm -Number: 3 rolls available -Price: per piece -Weight: 4.7 kg

Jungheinrich EJE116 Electric pallet truck Electric pallet truck, load capacity 1600Kgs, forks 1150mm, with spare battery

Inv. Num. : 6803 Type: SUPRAREX SXE P-1 400 Producer: ESAB Created: 2007 Parameters: Table height: 700 mm Cutting speed: 24000 mm/min Sheet thickness: 300 mm Cutting length: 2x6000 mm Cutting width: 3000 mm Machine height: 2190 mm Machine length: 2025 mm Machine width: 4654 mm Machine weight: 2000 kg

Jungheinrich EFG216K Forklift truck Serial: FN492262 Electric forklift, max lift 1500Kgs, treble mast, with charger

Air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg

Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg

Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg

Staplers Hohner Economy 25/40 - 15/25 - 25 in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Gear motor, electric motor -Speed: 33 rpm -Power: 0.75 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 540/200/H225 mm -Weight: 30 kg

Perfect binder Heidelberg Eurobind 600, machine number FMDDA0 000027, year of manufacture 2007, 1 clamp, hot melt, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

The type 221 fully automatic case erecting machines are designed to handle average sized cases in a wide variety of styles. The machines seal with either self-adhesive tape and are extremely simple to use. They are versatile, reliable and efficient. They also have a small footprint and offer great value for money. CASE DIMENSIONS The standard type 221 case erecting machines can handle cases between 200-500mm length, 150-400mm width and 175-600mm height. SPEED Up to 16 cases per minute Machine is ready for immediate use and available

Geared motor, electric motor, electric geared motor -Speed: 3.55 rpm -Power: 0.55 kW -Shaft diameter: Ø 50 mm -Design: B5 -Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg

geared motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motor available Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Gear motor, electric motor -Speed: 59 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 475/190/H170 mm -Weight: 18.90 kg

Gear motor, electric motor -Speed: 0.49 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 60 mm -Protection class: IP 54 -Dimensions: 740/380/H410 mm -Weight: 133 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg

Gear motor, electric motor -Speed: 2.5 rpm -Power: 0.25 kW -Design: B3/B5 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Quantity: 1x piece available -Dimensions: 630/260/H230 mm -Weight: 27 kg

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Key data: 13000 , 4200 , 110

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Gear motor, electric motor, electric gear motor -Speed: 3.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 127 kg

Geared motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.25/0.3 kW -Design: B3 -Shaft diameter: Ø 30 mm -Length: 180 mm -Protection class: IP 44 -Dimensions: -Weight: 25 kg