e p used for sale

Gear motor, electric motor -Speed: 22 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 18 mm -Protection class: IP 44 -Dimensions: 385/185/H190 mm -Weight: 14 kg

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

scrubber dryer, floor cleaning machine, mop machine -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm -Charger -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg

Gear motor, electric motor, electric gear motor -Speed: 34 rpm -Power: 0.15 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/260/H165 mm -Weight: 13 kg

Gear motor, electric motor, electric gear motor -Speed: 51 rpm -Power: 0.15 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 410/170/H200 mm -Weight: 16 kg/piece

Gear motor, electric motor, electric gear motor -Speed: 54 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 380/240/H155 mm -Weight: 17 kg/piece

Geared motor, electric motor, electric geared motor -Speed: 20 rpm -Power: 0.25 kW -Shaft diameter: Ø 25 mm -Design: B5 angle -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 24.3 kg

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Speed: 15 rpm -Power: 0.25 kW -Diameter shaft: Ø 25 mm -Construction: B5 angle -Protection class: IP 54 -Brake -Number: 8x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 136 rpm -Power: 0.37 kW -Construction: B3 angle -Wave output: 2 -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 440/230/H220 mm -Weight: 21 kg

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Brake: 24 volts -Number: 2x motors available -Price: per piece -Dimensions: 430/210/H220 mm -Weight: 16.8 kg

Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Brake -Dimensions: 465/185/H200 mm -Weight: 18.8 kg

Gear motor, electric motor, electric gear motor -Speed: 30 rpm -Power: 0.75 kW -Diameter shaft: Ø 40 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 555/250/H250 mm -Weight: 40 kg

12 meters long, 1 meter wide

EAGLE eVision 1530 F4.0 4kW fiber laser was built in 2016 in Poland. The machine has been maintained and upgraded on an ongoing basis throughout its service life. In 2021, the cutting head and modules in the laser source were replaced. The laser cutting machine is designed for machining sheet metal made of, among others, stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDS ...

Gear motor, electric motor, three-phase motor -Speed: 84 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 350/185/H200 mm -Weight: 14.2 kg

Gear motor, electric motor, three-phase motor -Speed: 91 rpm -Power: 0.25 kW -Construction: B14 angle -Diameter hollow shaft: Ø 18 mm -Protection class: IP 54 -Dimensions: 300/120/H170 mm -Weight: 8.4 kg

Gear motor, electric motor, three-phase motor -Speed: 150 rpm -Power: 0.18 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 500/215/H180 mm -Weight: 26 kg

Gear motor, electric motor, three-phase motor -Speed: 57 rpm -Power: 1.1 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Dimensions: 620/260/H260 mm -Weight: 40 kg

Gear motor, electric motor, three-phase motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Dimensions: 565/250/H250 mm -Weight: 33 kg

Gear motor, electric motor -Speed: 42 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 490/203/H220 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Speed: 164 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/190/H230 mm -Weight: 33 kg

Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 454/200/H155 mm -Weight: 19 kg

Geared motor, electric motor, electric geared motor -Speed: 49 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: 16 mm -Protection class: IP 54 -Dimensions: 330/190/H140 mm -Weight: 11.6 kg

Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg

Gear motor, electric motor, electric gear motor -Speed: 179 rpm -Power: 9 kW -Design: B3 -Shaft diameter: 55 mm -Protection class: IP 44 -Quantity: 1 piece available -Price: per piece -Dimensions: 1000/310/H365 mm -Weight: 181 kg

Gear motor, angular gear motor, electric motor Electric gear motor -Angular gear motor -Motor power: 0.55 kW -Speed: 104 rpm -Shaft diameter: 20 mm -Construction: B5 angle -Brake -Number: 2x motors available -Price: per piece -Dimensions: 485/240/H160 mm -Weight: 20 kg

Gear motor electric motor -Speed: 125 rpm -Power: 0.44 kW -ED: 60% -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Brake -Dimensions: 410/260/H225 mm -Weight: 22 kg

Gear motor, electric motor -Speed: 79 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 415/250/H250 mm -Weight: 26 kg

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Roller chain, drive chain -per chain length: 1.25 m -20B-1 roller chain -Number: 17x chains available -per chain length: 1.25 m -Price: 30 Eur/m -Weight: 4.6 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

geared motor, electric motor -with integrated frequency converter 0.37 kW -Speed: 60 rpm -Power: 0.55 kW -Design: B3 angle -Shaft diameter: Ø 20 mm -Brake -Protection class: IP 54 -Dimensions: 380/160/H240 mm -Weight: 13.5 kg

1 SULZER VAUPEL label rapier loom type G6500 S150 N8 J and EWM 80-135E, year 2006, weaving width 126 cm, STÄUBLI electronic jacquard type DX110, STÄUBLI JC6 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

1 SULZER VAUPEL label rapier loom type G6500 S190 N8 J and EWM 80-175E, year 2008, weaving width 168 cm, BONAS electronic jacquard type ZL 2L-24, 2304 hooks, BONAS Series 800 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

Gear motor, electric motor -Speed: 94 rpm -Power: 0.15 kW -Construction: B5 angle -Diameter hollow shaft: Ø 22 mm -Protection class: IP 54 -Brake -Number: 1x engine available -Price: per piece -Weight: 14.3 kg

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

Skinning machine Maja Type: ESB 3441 Power: 1.1 kW Voltage: 380 V Dimensions: 70x114x95cm Delivery time: 10 working days after advanced payment

MAK 8M32C Engine Block In Reusable condition

Automatic punching machine for Wire-O and more Make JBI - Lhermite Model Lhermite EX610 Year 1985 Minimum size 90 x 110 mm Maximum size 530 x 610 mm Capacity up to 2.5 mm thickness depending on materials Speed up to 8.400 cycles per hour, depending on size and materials Tools Wire-O 3:1 with square holes, platic comb punch, spiral punch, 4 hole punch for ringbinders Video click here

Gear motor, electric motor, electric gear motor -Speed: 5 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 570/160/H215 mm -Weight: 18.2 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/200/H240 mm -Weight: 27 kg

Gear motor, electric motor, three-phase motor -Speed: 95 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 390/210/H180 mm -Weight: 16.7 kg

Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 27 mm hexagon -Protection class: IP 44 -Dimensions: 510/200/H190 mm -Weight: 15.7 kg

Fully automatic flatbed die-cutter, non-stop feeder, automatic introduction with large vacuum plate, double sheet cleaning station, platinum unit, turn die cutting frame, (batch delivery) non-stop delivery with belt, cutting force 300 TON, 4.500 speed/h, working with corrugated cardboard of thickness max. 9.5 mm, min. 0.8mm, The Machine Can Cut On Micro-corrugated Cardboard, Jobs Quick Change Device, Working With Compact Stock Of Thickness 1 mm And Beyond, Cutting Force 350 TON, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories

INDUSTRIAL CONFIDENTIAL SHREDDER Type: Single-Shaft Shredding System Manufacturer: ERDWICH Model: M400/1-400 Condition: Used, very good condition, serviced. Power: 2.2kW 400v 50Hz 3Phs Screen Perforations: 12mm Description: Premium German designed and built heavy-duty, industrial, single-shaft shredder. Used for the size-reduction, destruction of confidential documents and materials, such as identification card and passports. Principle of Operation: Fully self-contained size-reduction solution, material is loaded, via the gas strut assisted door, at the top of the shredder. Material is shredded by a series of cutting tools, mounted to a rotor which passes through a static knife until small enough to pass through a perforated screen and discharged at the base of the machine. The shredder has both pneumatic pusher ram (introducing material to the rotor) and H²0 misting ( ...