e p used for sale

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 7500 rpm -Shaft: Ø 35 mm -Dimensions: 370/192/H295 mm -Weight: 24 kg

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -from: scrubbing machine make Gansow -Number: 17x available -Price: per piece -Dimensions: Ø 145/H210 mm -Weight: 2.7 kg

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer -Voltage: 24 V -Quantity: 29x available -Price: per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.

5 elevators galvanized or painted, length from 8 to 24 meters, capacity 80 t/h to 200 t/h Tel. 01715213204

Level measuring device, sensor, switch, level transmitter -Fill level transmitter -Manufacturer: Endress-Hauser -Type: FTL20-012B -Number: 1x level transmitter available -Price: per piece -Weight: 0.4 kg

Product number: 2830 Type: TRF630 Serial number: 6700597-9144-21 Year of construction: 2006 Compressed air: 6 Bar Water: 1.5 - 3 Bar Power: 3 x 400V, 50Hz, 15kW Dimensions: 1100 x 2050 x 1500 mm Weight: 635 kg

grinding length: 1500 mm grinding width: 900 mm workpiece height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Sorting insert diam. 550 mm made of stainless steel • Frequency control unit MFS 168 • Oscillation 3000 • Plastic housing • Height adjustable • Mobile • Electr. connection 230V/50Hz

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

scoring head, glass cutting table, glass cutting table, glass cutting machine -Number: 21x scoring heads available -Manufacturer: Eitzenberger Luftlagertechnik GmbH -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs

Gear motor, electric motor -Speed: 99 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Number: 1x gear motors available -Price: per piece -Dimensions: 300/145/H130 mm -Weight: 5.3 kg

Ham press Erhard approx. 120 liters capacity, completely in stainless steel, compressed air operated, with intermediate boards and stainless steel brackets, Dimensions LxWxH approx. 107x59x99cm, weight approx. 180kg, good used condition, works perfectly

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Manufacturer: ifm -Type: ecomat300 AC5215 -Number: 36x modules available -Price: per piece -Weight: 0.15 kg/piece

Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 130 mm -Recess: Ø 102 mm -Bolt circle: Ø 116 mm -Through hole: Ø 29 mm -Weight: 4 kg

One used flexible welding line EVG GH400 for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

ABUS ELKE - ELV 5t / 11m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : IR-H 10 radio control Wingspan : 11000 mm Chassis (sides): 2330 mm, are mounted Load capacity : 5000 kg Tare weights : approx. 2710 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

ABUS ELKE - ELV 5t / 15m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : DEMAG IR-H 10 radio control Wingspan : 15000 mm Chassis (sides): 3220 mm, are removed Load capacity : 5000 kg Tare weights : approx. 3950 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 5.5 kW -Speed range: 15 to 90 rpm -electrically adjustable -Drive shaft: Ø 40 mm -Design: B3 -Protection rating: IP54 -Dimensions: 600/700/H270 mm -Weight: 130 kg

Safety switch, safety switch, TZ -AC-15 4 A 230 V -DC-13 4 A 24 V -Protection class: IP 67 -Number: 8x available -Price: per piece -Dimensions: 125/38/H42 mm -Weight: 0.1 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg

Water flow rate 30-150l/h Flow meter with manual control valve Solenoid valve for water and compressed air. Pressure regulators for water and air Special nozzle for injecting water and air Mounted on a plate

Safety control, safety door switch, safety switch, safety sensor, magnetic switch -Type: 161 271 AC -Protection class: IP 67 -Number: 18 available -Price: per piece -Dimensions: 75/40/H55 mm -Weight: 0.2 kg

Car wash VAIOCS 1G Max. tool dimensions ... 530x320x200mm Max. workpiece weight ... 70kg Machine weight... 3000kg L x W x H ... 2800x1750x2400mm Cleaning process - solvent immersion degreasing alternatively with ultrasound -Immerse - Intermediate drying - Steam degreasing - Vacuum drying Electrical power: Heating capacity 33 kW Motor power 13 kW Cooling capacity approx. 15 kW Power consumption approx. 51 kW / 90 A Operating voltage 400 V / 50 Hz / 3/N/PE Compressed air approx. 6 bar

Etis System 4 Labeler KBA Printer Top Bottom Applizer Etis System 4 Labeler with KBA printing system - several in stock

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: SEW Movigear Drive Motors/ Motor Quantity: 11 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hackeranlage Rudnick Enners 650/200 Motor 37kw vibrorinen Metaldetector kratzforder Containerbefillen

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Basic module, distributor -Connection: 8 x M12 -PNP -5- pole -Dimensions: 150/50/H20 mm -Weight: 0.13 kg

Amplifier unit, amplifier -Type: DT110-U15-A-C2 -Series: multiNCDT -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

Dosing system, dosing device, dispenser for dosing system, dosing machine -Type: 1500XL -Dimensions: 265/150/H65 mm -Own weight: 2 kg

Input module for valve terminals -Type: CP-E16-M8 -16 inputs: 24V DC -Signal status display: via 16 LEDs -CP- functionality -M8: connector -1x: M9 CP connection -PNP/NPN -Protection class: IP 65 -Dimensions: 65/150/H50 mm -Weight: 0.34 kg

Used biscuit moulding machine with various shapes made by Elcal from Biała Rawska.

Offered are unused right-angle gears, partly in a wooden box! Manufacturer: Brevini (Reggio Emilia-Italy, 42100 Via U. Degola, 14 / Riduttori SpA -Germany representation, 45549 Sprockhövel) 1 piece Type: EC 3065 / FE Output i=56 Input 48.82 1 Piece Type: EC 3065 / F Output i=56 Input 48.82 To be delivered individually or completely.

pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm -Weight: 19 kg

Clamping bush, hydraulic clamping bush -Type: ETP-EXPRESS R-25 -Flange: O 58 mm -Flange width: 14 mm -Shaft: Ø 30 mm -Shaft length: 35 mm -Bore: 25 mm -Dimensions: Ø 58/H49 mm -Number: 4x available -Price: per piece -Weight: 0.27 kg/piece

chiller, chiller Emicon RAS 801 S KP YOC 2018 80 Kw cooling capacity 22.8 Kw. Electrical Power, Amp. 62 Refrigerant R290 Weight 1.106 kg.

Bowl cutter Kilia 50l 3000 RS Express 50 liter stainless steel bowl Operation via push button 2 knife speeds 2 bowl speeds Mixing speed forwards and backwards 6 pcs. knife head 3 pcs. knife head Rated power 15 kW, total rated current 33 A Operating voltage 380 V / 50 Hz Weight approx. 950 kg

chiller, chiller Emicon RAS 601 S KP, , 60 Kw cooling capacity , 17.7 Kw. Electrical Power, Amp 51 YOC 2018 Refrigerant R290 Weight 1.062 kg.

Specifications Ø tubes / radius in mm: Ø 22 / 67 Ø tubes / radius in mm: Ø 10 / 36

Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg

Gear motor, electric motor, electric gear motor -Speed: 57 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 22 mm -Protection class: IP 54 -Quantity: 1x available -Dimensions: 455/155/H195 mm -Weight: 18.8 kg

new spiral mixer Masz SMR 180 extendable, year of construction 2023, 120 kg dough, 2 clocks, stainless steel spiral, with 1 stainless steel kettle, if necessary with 1 additional kettle for an additional 3,800€, Fabr.-No. 121323, boiler diameter 75 cm, 6.8 kW, 50 Hz, 400 V, external dimensions 149 x 87 x 128 cm, weight: 549 or 726 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: GR199 CF-D-160-10 -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H54 mm -Weight: 6 kg