e p used for sale

Used Used Case Erector Mondo&Scaglione 367/C: Year: 1997 Condition: Good Used Case Erector Mondo&Scaglione 367/C Year: 1997 Speed: 500 c/h Model: formatrice 376/c Safety protections Code: G 72 More details: https://bottlingscout.com

Used Used Erector Apsol Ace 30 Hm: Year: 2007 Condition: Good Used Erector Apsol Ace 30 Hm Year: 2007 Speed: 1.500 Boxes | Hour Model: ACE 30 HM Gluer Formats: Boxes of 6 and 12 bottles Safety protections Code: G 78 More details: https://bottlingscout.com

Used Used Case Erector Bortolin-Kemo Foc 23/30: Year: 2009 Condition: Good Used Case Erector Bortolin-Kemo Foc 23/30 Year: 2009 Speed: 20 pz/min. Model: foc 23/30 For american boxes Type: glue system Gluer: nordson Safety protections Code: G 74 More details: https://bottlingscout.com

Used Used Case Erector Bortolin-Kemo: Year: 1996 Condition: Good Used Case Erector Bortolin-Kemo Year: 1996 Speed: 25 pz/min Model: FORMATRICE CARTONI Type: Glue closure Type of boxes: American for 6 and 12 bottles Incollatore Nordson Safety protections Code: G 83 More details: https://bottlingscout.com

Used Used Case Erector Ape Form 1.200 Hm B: Year: 2002 Condition: Good Used Case Erector Ape Year: 2002 Speed Model: FORM 1200 HM B Type: Cold glue Nordson Gluer Safety protections Code: G 82 More details: https://bottlingscout.com

Used Used Case Erector Sge: Year: 2007 Condition: Good Used Case Erector Sge Year: 2007 Speed: 8.000 bph Model: formacartoni Gluer included Safety protections Code: G 65 More details: https://bottlingscout.com

Used Used Case Erector Mondo&Scaglione: Year: 2007 Condition: Good Year: 2007 Model: 382/C Speed: 15 CPM Gluer NORDSON Hot melt Safety Protection Dimensions: 2.400 x 2400 x 1.900 h Code: G 89 More details: https://bottlingscout.com

Used Used Case Erector mh-fj-3a: Year: 2015 Condition: Good Used Case Erector mh-fj-3a: Model: MH-FJ-3A Year: 06/12/2015 Closing box by Tape Layout: Lenght 3050 mm; Weidht 1240 mm (with plate for cartons close, otherwise 2240 mm) Haight: 1700 mm Speed: 10 CPM Safety protections Code: G 88 More details: https://bottlingscout.com

Used Used Case Erector F 377.62: Year: 1998 Condition: Good Used Case Erector F 377.62: Model: F 377.62 Year: 1998 Speed: 1680 cartons/hour Nordson hot seal Carton dimensions Minimum Maximum Parameter Length 245 mm 500 mm Width 150 mm 400 mm Height 80 mm 365 mm Lower flap 75 mm 170 mm Height + upper flap 200 mm 480 mm Length + Width 380 mm 820 mm Accident prevention protections Code: G 93 More details: https://bottlingscout.com

Used Used Caps Elevator 3.000 bph Marmoinox 2016: Year: 2016 Condition: Good Used Caps Elevator 3.000 bph Marmoinox 2016: Model: alm-zve1 Year: 2016 Speed: 3.000 BPH Type of workable cap: Plastic pre-threaded cap Type: pneumatic Measurements-overall dimensions of machinery: 2100 mm x 750 mm x 3000 mm (h) Safety protections Code: I 78 More details: https://bottlingscout.com

ENVASQUIM brand liquid filler model ENV1/43B. Dosage range: 100-1,000 ml Power supply: 380 V (50 Hz) Working temperature: 0-40ºC Compressed air supply: 6 bar Usable width of tape 100 mm Documentation: Technical file CE marking Technical characteristics Model ENV1/43B Transportation Information Length 2100 mm Width 1400 mm Height 1700 mm Weight 350 Kg Documentation CE Certificate Status In your state Manufactured by Envasquim

Item condition: Little used, very good condition Country of origin Germany Application: Steel, Product type Wire Feeder Welding Machine Special features Inert gas, water-cooled Welding process MIG / MAG Welding current 50 - 400 A. Welding voltage MIG 16.5 - 34 V. DV case WEGA DRIVE 4. With intermediate hose package, welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. Dimensions: Length x Width x Height: 1050 x 560 x 1100 mm

Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details.

For sale is an EPS block mold, manufacturer Erlenbach, year of construction 2008, 5000 mm x1300 mm x1000 mm, vacuum system, The system ran very well until the end. The facility can be visited by prior appointment

Manufacturer: Macchi Year of Manufacture: 2012 Machine Type : 3-layer co-extrusion blown film line Condition: Good working condition, currently in production Materials LLDPE, LDPE, LLD, HDPE Extruders - Configuration: 65 mm + 80 mm + 65 mm (3 extruders) - Heaters: Infrared - Filtration: 3 plate filters Die Head - Type: 3-layer blown film die head - Reference: TE5303-IBC-350/500 - Die diameters available: 350 mm and 400 mm - Die gap: 1.8 mm - Internal Bubble Cooling (IBC): yes Output - Maximum output: up to 800 kg/hour depending on material formulation Air Ring - Type: Dual flow air ring, carbon fibre construction Take-Off Unit - Take-off width: 2400 mm - Nip type: Oscillating - Side gusseting: motorised Rewinder - Type: Double winder, fully automatic back-to-back rewinder - Roll change: fully automatic - Maximum reel diameter: 800 mm - Winding width: 2350 mm Accessories ...

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

LAB FILM EXTRUDER BETOL 2525, for testing granules, single screw extruder, screw Ø 25 mm, blown film die head 60 mm., 3,0 kw d.c. motor and drive., 4 heating zones on barrel., 2 die head heating zones, cooling on screw and throat, calibration cage, nips and rolls, tower, 500 mm wide double collection frame, control panel, type: lab extruder

Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine.

Die-sinking EDM machine Manufacturer: Exeron Type: 312 Year of Make: 2004 Control MF10 Travel paths X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working container: 900 x 520 mm Distance table / quill: 150 / 450 mm Max. electrode mass: 30 / 150 kg Max. workpiece weight: 800 kg Filling height work basin: 300 mm 20-fold tool changer Generator current: 60 A Power supply: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/ H approx.: 1,910 x 1,798 x 2,300 mm

In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt

BVM Compacta 5022 EGS Sleever + Inline BVM SC 4530 Heat shrink tunnel, Age 2014, Infeed flighted Conveyor length 1200 mm (approx.), BVM grouping System:, For production of multipacks of upto 4 Stacks side by side, consisting of:, Transport conveyor, width 400 mm, length 1000 mm (approx.), 1 Rake on top with mechanical positioning via frequency converter in servo mode, Including pneumatic flap for producing multipacks of 1, 2, 3 or 4 Stacks side by side, Max. length of Stacks 630 mm, BVM fully enclosing packing/ Sleeving machine Compacta 5022. Fully automatic, fed by conveyor belt with photocell control, including 100 format-data storage locations, Technical Data:, Service side standard : left had side, Sealing length : 500 mm, Passing Height : 220 mm (standard), Belt width infeed/ outfeed conveyor : 400 mm, Speed : upto 120 cycles/ min , Length sealing : continuously working, Film width  ...

26 Coils EDM-Cut Brass Blank Ø 0.25mm 500 N/mm² DIN 160 8 kg/spool

For Sale: Jenbacher J620 GS-E12 – year 2013 Power output: 4277 kVA The unit was fully overhauled at 50,000 operating hours and has since run for approximately 36,000 hours. Included equipment: Control panels Transform Gas line Dry cooler Complete installation in good operational condition. Loaded now in France

General SKU227Y123 LocationBarneveld MakeTerlet Type190 l. No.89-063 1 Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor7.5 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Scraped surface heat exchangercheck Capacity190 l. Cylinder sizesø 570 x 1230 mm Max. temperature100 °C With jacketcheck 34 l. & 2,6 l. InletDN50 OutletDN50 Motor7,5 kW, 380—415 V Speed± 66 rpm Information Year of construction1989 Mounted on framecheck legs Floorspace1,20 x 0,90 m Total height2,40 m Weight1000 kg Extra Specifications6-arms scraperScraped surface heat exchangersNew arrivalsTerletHeat exchangers > Scraped surface heat exchangersNew arrivalsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU437X1383 LocationBarneveld Pressure Working pressure shell45 Bar Vacuum possible shellcheck Working pressure tubes25 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface30 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Horizontalcheck Heating surface30 m² Tube capacity190 l. Number of tubes:40 Tube diameter25 mm Tube length10 600 mm Wall thickness tubes2 mm Max. temperature250 Shell capacity420 l. Shell diameter400 mm Shell length6 400 mm Max. temperature250 Shell connectionsDN80 Cover connectionsDN80 Information MakeK.ley Eiterfeld Serial5654 Magento base g_extra_specificationsPressure -1/25 bar, volume 190 l., allowable temperature 250°C, jacket volume 420 l., pressure -1/45 bar, 30 m2, own weight 1800 kg, drawin ...

General SKU279X367 MakeSondex LocationBarneveld CEcheck TypeSonspy 1400 Pressure Working pressure shell16 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface18.87 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface18,87 m² Max. temperature200 °C Shell diameter1400 mm Max. temperature200 °C Information No.SP10096 Year of construction2014 Mounted on framecheck Floorspace2,20x2,40 m Total height1,60 m Weight5000 kg Extra SpecificationsSpiral heat exchangerShell and tube heat exchangersNew arrivalsSondexHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Sondex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Y ...

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan, radial fan -Motor power: 0.139 kW -Speed: 1600 rpm -Volume output: unknown -Connection air duct: 90 x 90 mm -Price per piece -Quantity: 2 pieces -Dimensions: 280/165 / H230 mm -Weight: 3.1kg / piece

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: E03 Item No.: 140466 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 350 mm -Weight: 0.1kg/pcs

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Restoring force: 120 N -Power: 0.15 kW -Stroke: 50 mm -Dimensions: 417/150/H190 mm -Weight: 9 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.62 kW -Volume output: approx. 45 m3 / min -Connection air duct: 285 x 140 mm -Number: 2x fans available -Price per piece -Dimensions: 390/340 / H340 mm -Weight: 15 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: ENA -Type: 4-060-15-0660 -electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot is broken in one place -Power: 3.5/14 kW -Speed: 730/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 620/390/H310 mm -Weight: 130 kg

Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Actuator for: gate valves, locks, ... -Speed: 40 rpm -Power: 0.7 kW -Construction: hollow shaft -Diameter hollow shaft: 41 mm -Protection class: IP 57 -Number: 1x drives available -Price: per piece -Dimensions: 500/520/H310 mm -Weight: 32 kg

rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Power: 3/11 kW -Speed: 720/1450 rpm -Shaft: Ø 42 mm -Construction: B3 -pole changing -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 600/390/H320 mm -Weight: 108 kg

Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servomotor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive -Power: 0.2 kW -Adjusting force: 500 N stroke: 100 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 500/180/H215 mm -Weight: 15 kg

Three-phase motor, electric motor -Manufacturer: Loher, electric motor type eAL 100L2B-4 -Power: 2.5 kW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Bolt circle: Ø215 mm -Recess Ø180 mm -Flange: Ø 250 mm -Design: B5 -Protection class: IP 55 -Dimensions: 380/250/H295 mm -Weight: 28 kg

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: TR-Electronic, rotary encoder -Type: HE-65-M -Art.No: 205-00059 -Voltage: 11-27 V -Number: 1x encoder available -Price: per piece -Dimensions: 140/100/H165 mm -Weight: 1.3 kg/piece

electric motor, three-phase motor -Handover: in its current condition as inspected -Drive shaft: Damaged, see photos -Manufacturer: ETM, Electric motor type B5-80x0.55x1500 A -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 19 x 40 mm -Design: B5 -Dimensions: 265/198/H220 mm -Weight: 11.3 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: SEW Eurodrive, electric motor with brake / without gear -Type: RF40DT80K4B -Speed: 1400/165 rpm -Power: 0.55kW -Type: B5 -Shaft: Ø 12 x 20 mm -Protection class: IP 44 -Brake: 10 Nm -Dimensions: 350/145/H205 mm -Weight: 13 kg

Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module -Manufacturer: Fanuc, Electronic module expansion module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I -Expansion module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm -Weight: 3 kg

Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, rotary indicator, resolver, rotary pulse encoder -Manufacturer: TR-Electronic, rotary encoder -Type: CE 65M -Item No.: 110-00210 -Voltage: 11-27 V -Shaft: Ø 10 x 20 mm -Dimensions: Ø 65 x 132 mm -Weight: 0.6 kg