e p used for sale

CNC, automatic balancer of wheels Balance Systems, speed variator in the grinding wheel, speed variator in the grinding wheel / CNC, automatic balancer of wheel Balance Systems, Speed ​​variator of Grinding Wheel, Speed ​​variator of Regulating Wheel,, Ø grinding wheel dimensions (od x id x width): 610 mm, Ø min / max to grinding: 1.5 - 120 mm, Peripheral grinding wheel speed (m / s): 35 m / sec, Regulating wheel width: 254 mm, Min / max regulating wheel speed (r.p.m.): 10-300 RPM, Cnc brand: FANUC, Cnc model: Power Mate - iH, Cnc axes nº: 3 + spindle, Regulating wheel dimensions (od x id x width): 305 x 127 mm x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Motor power grinding wheelhead: 22 kW, Total power: 35 kW, Voltage: 220/380 V, Long: 4,795.5 mm, Width: 3.806 mm, High: 2.355 mm, Weight: 6.450 kg, Accessories included: CNC, automatic bal ...

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

Package consisting of Artec Eva 3D scanner and Artec Spider 3D scanner in very good condition with power supply, USB cable and transport case. A license for the Artec Studio software must be purchased from Artec for a price of around 2,000 euros. It is not possible to transfer the existing license., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, color resolution: 1.3 mp, Lightsource: Flash bulb (no laser), Light source: Flash bulb (no laser), lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video fra ...

for sale is a MIG -MAG welding machine from Ess Schweißtechnik Bad Waldsee, HV 8534, Subject to prior sale, changes and errors!

Universal cylindrical grinding machne TACCHELLA ELEKTRA-Evo 1018 MPC - FANUC 21i MPC, Information about technical data are not binding., Machine available subject to prior sale., Height centres: 180 mm, Distance between centres: 1000 mm, Wheel dimension: 508x80x203,2 mm, Wheel speed: 2000 rpm - Variable and programmable, Spindle motor power: 8,2 Kw, Internal grinding spindle speed: 30.000 rpm, Weight: 6.500Kg

UNION SINGLE SCREW EXTRUDER, barrel with 150 mm Ø screw, 40 L/D, electric cabinet, degassing system, nominal throughput rate ca.700 kg/h, missing of screenchanger - available semi-automatic on separate offer, missing of cutting unit - possible addition of strand/water ring/underwater on separate offer, This is an evergreen sturdy extruder

BANDERA SINGLE LAYER BLOWN FILM EXTRUDER, for LDPE MDPE + RLDPE, 3-stations Piovan volumetric dosing uniit, Screw diam. 80 mm., 200 mm. die, dual-flow Garba Plast head 200 mm (new in 2022), pull off unit, single rewinding unit 1.200 mm. wide, c.a.drive with new inverters, Average throughput rate 100 kg/h, The line can be inspected any time., Recently used for garbage bags, it includes a 1-color printing group, corona treatment, tower included, electric cabinet for conplete management, immediately available, availability: Immediate, PRESENT CONDITIONS: running and testable, ACCESSORIES: corona treatment+1-col. printer

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered AS IS, WHERE IS., price options: as is, checked, lightly reconditioned, totally reconditioned

VIBRO CLASSIFIER FOR GRANULATES, 2 outlets, dimensions : 500 x 1.400 mm., screen holes 8 mm Ø, all parts in contact with water are in AISI304 stainless steel, wheeled supporting structure, complete with connecting plug, machine offered checked for good conditions, total dimensions : 1.900 x 850 x 1.000 kg.300

Manufacturer LINDNER N O W A T R E D U C E D P R I C E Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width

FBM plastic extruder with Ø 120 mm spindle and underwater head cutting. Ideal for recycling and granulation lines. Brand: FBM (Falzoni) Model: ETF 120 V 380/5L Motor: 200 kW (270 hp) L/D ratio: 35 Underwater cutting (PRT, 2006) Includes: force-fed silo Extras: degasser and filter changer Year: 1988

Electromagnetic Latch autas AZM 415-222pk 24 VDC Manufacturer: autas (a Schmersal company) Model No.: AZM 415-222pk Type: Electromagnetic Security Latch/Magnetic Lock Operating voltage: 24 VDC Degree of protection: IP67 Contact load: AC15 – 250 V / 4 A, 230 V Fmax: 3500 N Design: compact, with base plate and connection cable Standards: IEC 947-5-1, DIN VDE 0660 Condition: used, dismantled from STAMA MC 325/S Dimensions: approx. 210 × 125 × 50 mm Weight: 1.58 kg Price plus VAT

Etikettiergerät / Labeling machine EcoLine 100-XSR Baujahr / Year 2013 - Serial-No. 6012 Durchlassbreite / bandwidth 100mm Stoppgenauigkeit / stopping accuracy +/- 0.5mm Etikettenlänge / label length min. 10mm Etikettenbreite / label width min. 10mm Innen-Durchmesser Etikettenrolle / Inside diameter of label roll 40/76mm Aussen-Durchmesser Etikettenrolle / Outer diameter of label roll 300mm Netzspannung / Voltage 115/230V, 50/60Hz Leistungsaufnahme / power consumption 400 VA Zertifizierung / Certification CE IP-Schutz IP44 (optional IP54)

Manufacturer: Eckert Model: Jantar Year of Manufacture:2010 Table size: 3x6 meters 2 Hypertherm XPR 120A high-definition plasma cutting heads Pipe cutting attachment Exhaustor system One plasma source has had parts removed and requires replacement components. The machine is fully operational with one cutting head. Find more here - / Contact us at -

Smooth and efficient batter coverage to a wide range of products in a wide variety of shapes and styles. Belt Size (mm): 1000 wide

Manufacturer: EXTRAKTLAB Model: e 140 Condition: Refurbished (2021) Processes up to 8 kg of input material per hour depending on process conditions. Extraction vessels: 2 x 20 L Collection vessels: 3 x 2.5 L Recycler vessels: 1 x 20 L CO2 Pump Flow Rates Range (LPM): 1.5 to 2 LPM Max Operating Pressure (psi): 5000 psi, 344.74 bar Maximum Process Temperature: 90°C Skid Operating Temperature (C°): 5 to 40°C (15 to 30°C optimal) CO2 Solvent Inlet Lines: 1 Eluent Inlet Lines: up to 2 User Interface: Touch Screen HMI panel with barcode scanner, maintenance tracking, recipe storage (parameter). 21 CFR Part 11 compliant software. Biomass Loading and Unloading: 10 micron flexible no channel bags Operating Humidity: 20 to 80% Compliance – UL 508A electrical panel Electrical – 50 Hz 208V-240V, 3 phase, Footprint:- 24ft. Dimensions – 99″ x 34″ x 72″ (LxWxH) Constru ...

NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts an ...

E-welding machine, rod electrode welding machine ESAB type LTG 250Masch. No. 736-820-387 Year of construction 1997Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % EDpower setting: infinitely variable - electrode holder with 6 meter connection cable - direct current - fan - air cooling - possibly also TIG welding possible, without hose packageMains connection 380 Volt, 50 Hz, 32 Amp. ConnectorSpace required L x W x H 1200 x 750 x 1050 mmWeight 180 kgGood conditionDevice was originally also suitable for TIG welding

TIG and Electric Welding Machine / Inverter ESAB Type LTN 160WIG Welding Machine for TIG and ElectrodeFabr. No. 405-423-0479 Year of construction approx. 2010Power TIG 160 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDL power electrode 140 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDNetz connection 230 Volt, 50 Hz, Schuko plug- stepless power adjustment- 2 stroke and 4 stroke operation- Operating mode rod electrode- 12 meter TIG hose package with hand torch- only DC = DC- HF ignition-

Electric forklift JUNGHEINRICH type EFG 216Serial No. FN413671 year of construction 2011Load capacity 1600 kgLifting height 4800 mmFork length 1220 mmFork carriage width 980 mmOverall height 2120 mmOperating voltage 48 volt- Triplex mast with full free lift 1550 mm- Hydraulic sideshifter- 2 travel speeds- Battery from year of construction 2015, Type 06 EPZS C750 SC (48 Volt, 750 Ah)- Automatic charger, 48 Volt- 3-wheel solid rubber - Front tires 18 x 7-8, rear 140/55-9- according to the operating hour meter 14725 operating hours read-

TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC)TIG Welding MachineFabr. No. 0507214 Year of construction 2007Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% EDLight electrode 180 Amp. = 50% EDNew connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine- stepless power adjustment- 2 stroke and 4 stroke operation- HF ignition- Pulse welding mode- Rod electrode operating mode- Water cooled- 8 meter TIG hose package with hand torch-

TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC)TIG Welding MachineFabr. No. 0907036 Year of construction 2007Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% EDL power electrode 140 Amp. = 35%EDNetz connection 230 Volt, 50 Hz.- DC and AC welding- HF- ignition- Stepless power adjustment- 2-stroke and 4-stroke welding operation- Pulse welding mode- Rod electrode operating mode- 8 meter hose package with TIG torch- Shielded gas pressure reducer-

Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: EST Ticino Type: ET-BM 400 Turning length: 1500 mm Turning diameter bed Ø: 800 mm Turning diameter slide: 470 mm Turning diameter pit Ø: 400 mm Pit length: 750 mm Spindle bore: 130 mm Power spindle: 15 kW Bed width: 600 mm Quill: 130 Ø Stroke quill: 300 mm Spindle mount: 6 Mk Speed: 600 rpm Dimensions (estimated) Length: 4500 mm Width: 1800 mm Height: 1800 mm Weight: 5200 kg with accessories: -Safety equipment - Face plate, four-jaw chuck, clamping jaws, tool holders, tips, drill chucks, tools All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the S ...

An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible.

Complete linear filler incl. screwdriver for several bottle formats including ROCHMAN tightening banderolier with shrink tunnel and take-off turntable

Twin-screw extruder, corrotating, brand: OMC, type: EBV 31/32D, year: 2001. 31 mm Ø composable spindles. Book-type shirt. 11 Kw motor with water-cooled variator and wire head. Total installed power: 25 kw

EyeSys System 2000 Corneal Analysis System The EyeSys 2000 Corneal Analysis System is designed to provide unmatched performance, accuracy, ease of use, and affordability with these key features: Optimal central and peripheral corneal coverage provides complete information for the entire cornea Automatic calibration and automatic data correction ensure greater accuracy of topographic data. Automatic focusing and simple examination paths improve ease of use, speed up the examination process and virtually eliminate all focus differences between operators. Advanced software applications include primary care, co-management, corneal surgery, and contact lens fitting. The unique and patented three-camera technology provides a side-view image of your patient's cornea and enables the use of true aspherical image processing algorithms. Simultaneous positioning of the patient and opera ...

Key data: 600 mm, 400 mm, 310 mm

A Mitsubishi MV2400R is being sold Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V axis: +/- 75 mm Type: 4-sided frame table hardened with automatic adjustment Vertical sliding door as a water bath machine Table size: 840 x 640 mm Workpiece sizes: max. 1050 x 820 x 305 mm Workpiece weights: max. 1500 kg Wire ̄: 0.1 to 0.3 mm for wire coil holder 10 kg Control: MITSUBISHI M800 with 19" Full-Touch Monitor (incl. hand pilot with configurable LCD monitor) Closed control loops min. axis resolution 0.05 μm Generator: Fine finishing generator H-FS AE II Digital Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Hand-held pilot with configurable LCD monitor 20-kilo wire station Angle Master Advance II Set Wear parts box Ergolux Lamp Corehold function Job Planner Filter Pump Pressure Sensor Operating data output Free software update if needed  ...

Undercarriage for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). But it certainly also fits on other machines, e.g. Brandt (might have to be adjusted a bit) Length of the U-profiles approx. 1130mm Body height incl. castors approx. 150mm 4 sturdy steel castors as swivel castors with grease fittings 2 Brakes 2 support plates for height compensation The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

ELBOR MAG - Wire Electrode Type SG-3 Condition Mint EN ISO 14341-A- (2011) G 46 4M21 4Si1/G42 3C1 AWS A5. 18-05: ER70S-6 Diameter 1.0 mm 250 kg - Drum approx. 230 kg still available in the barrel

ELBOR MAG wire electrode Type SG-3 Condition as good as new-original packaging EN ISO 14341-A-G4 G46 Si1 4M/G42 3C AWS A5.18-05: ER70S-6 15kg - Pack Diameter 0.8 mm

Used welding equipment As seen in the pictures, technical data See pictures. If you have any further questions, please Price is per piece

Key data: 704 KW, 880 kVA, 400 V

Brand Elbe Model No.: MT-825 CA Year of Make: 2007 Serial Number: 10330 Operating hours (read) < 500 Capacity (KvA) 880 Capacity (Kw) 704 Engine brand MTU Engine model 16V2000 Capacity motor (Kw) 720 Fuel Diesel Alternator brand Leroy Somer Alternator model LSA49.1L9 C6 S/4 Voltage 400 Frequency (Hz) 50 1500 rpm Amperes (A) 1270 Dimensions LxWxH (mm) On request Weight (Kg) approx. 17000 Quantity in stock 1 Made in Germany Comments Complete set ex Standby, for sight in our yard Condition of sale As / is present condition, functional take out of order

SIDEROS Model ECO 6 HC Year of construction 2006 7.5 KW

Manufacturer: ELITechGroup Model: InGenius Type of Machine : PCR machine ELITe InGenius® is an easy-to-use sample-to-result solution dedicated to Molecular Diagnostics which integrates extraction, amplification and result interpretation with an unprecedented flexibility and assay menu possibility. ELITe InGenius® processes 1 to 12 samples in parallel and independent tracks. It features a universal extraction process with multiple and independent PCR enabling the laboratories to create and run custom panels of assays on demand. ELITe InGenius® offers laboratories an unlimited menu capability, combining the largest CE-IVD infectious disease menu available on a sample-to-result instrument, with a real open capability. Benefits - Full Automation - Bench-top instrument integrating all the steps of molecular diagnostics: automated nucleic acid extraction, real-time PCR amplification, a ...

Specifications: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Wheel spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Tool holder inside ISO No. 50 DIN 2079 Tool holder outside ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds infinitely variable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step Jump 1:2 Constant power range 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x direction infinitely variable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y- and z- direction infinitely variable from 20-500 mm/min. Rapid traverse for y- and z-axis 1,00 ...

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG eco 2800 K complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 30 – 280 amps Duty cycle 30% ED at 280 amps 60% ED at 210 amps 100% ED at 180 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 97 kg Age 12 months Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of  ...

Height=0.913 m, Overall length= 0.818 m, Overall width= 1.709 m, Net weight= 2 kg,

Height=0.9 m, Overall length= 0.85 m, Overall width= 1.68 m, Net weight= 4 kg,

Height=1.09 m, Overall length= 0.72 m, Overall width= 0.91 m, Net weight= 2 kg,

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

Used 3-stage evaporator station for tomato juice and concentrate production made by Manzini. New: 1976. Serviced on a regular basis, renovated after each season, spare parts replaced as needed. Technical data: Capacity: 600 tons / day Tomato juice 5% processed: 24,000 kg / h Concentrate production 30%: 4,000 kg / h Water evaporation: 20,000 kg / h Steam consumption (including enemas): 7,650 kg / h Water demand: 250 m3 / h Installed power: 68.5 HP Dimensions: 14 m x 5.5 m H approx. 11 m

Emhart TUCKER ETF50R.00.54/12.5.13-25BM Stud Welder Technical details: Manufacturer: Emhart Teknologies (TUCKER GmbH) Model / Type: ETF50R.00.54/12.5.13-25BM Item number: T045 006/400 Voltage: 400 V, 50/60 Hz Make: Made in Germany Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Emhart TUCKER ETF50R.00.70/5.12-30F7 Stud Welder Technical details: Manufacturer: Emhart Teknologies (TUCKER GmbH) Model / Type: ETT50R.00.70/5.12-30F7 Item number: T045 001/400 Voltage: 400 V, 50/60 Hz Make: Made in Germany Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

KWe: 240, Working hours: 62000

V:\Mecamold\Lift transporters