e p used for sale

Key data: 54 KW, 60 kVA, 400 V

Remeha Gas Generator ELW 50-100 Gas electricity and heat generators from 2016, 32,728 operating hours, closed module. 1 available 50 KWel x 1,500 rpm, 400 V / 50 Hz. Manufacturer: Remeha Model: ELW 50-100 G2488 (identical to 2G G-Box 50) Type: Gas Electricity and Heat Generator Serial Number: MH0316C-EMEB-050356 AC generator (asynchronous): 2G WKASYG250/4-330T-GG AC generator speed [1/min]: 1,517 Engine: MAN E0834E302, 54 KW Power [KWel]: 50 Power [KWth]: 100 Voltage [V]: 400 Current [A]: 73 Frequency [Hz]: 50 Year of Make: 2016 Hours: 32,728 Weight unit [kg]: 1,800 Dimensions LxWxH [m]: 2.80 x 1.20 x 2.10

Four identical screen printing machines ESC are available. Rigid material thickness: 200mm, max. print format X/Y: 400mm/600mm, vacuum plate dimensions X/Y: 500mm/700mm, vacuum area dimensions X/Y: 405mm/600mm, max. frame dimensions X/Y: 600mm/940mm, frame profile range: 25mm-47mm, max. print material thickness: 200mm, working height: 960mm, frame lift: 270mm, printing speed range: 125mm-750mm/s, max. cycle rate: 600p/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, working pressure range: 5bar-7bar. Machine dimensions X/Y/Z: approx. 1300mm/1100mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.

This 3-axis ECKERT Jantar 2 plasma cutting machine was manufactured in 2021. It features a substantial table size of 2000 x 6000 mm and is equipped with a Kjellberg Q1500 MS/Automatic plasma source. The machine can cut steel up to a maximum thickness of 50 mm and offers grooving capabilities up to 35 mm. If you are looking to get high-quality plasma cutting capabilities, consider the ECKERT Jantar 2 machine we have for sale. Contact us for further details.

PTO hydraulic pump unit consisting of 1 piston pump (manufacturer unknown, no nameplate available, only cast letters (only readable number: 479 and 40°) and a gear pump HALDEX W15A1 44L K5 26NN . Untested for screwdrivers for recycling. Adapters, municipal slabs see photos Front sweepers, snow blades. ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

PSM / 900mm Biological Safety Station ESCO AIRSTREAM AC2-3E8 Material in excellent condition Year of manufacture: 2020 Complete package including: PSM ESCO Airstrem class II AC2-3E8 length 90cm (0.9m) A fixed support, base with levelling feet 2 internal sockets Type: Microbiological Safety Station Protection: Product + Person + Environment Width: 900mm Opening system: Manual sliding glass Flow Technique: PSM Initial Airflow Speed (m/s): Intake: 0.45 / Downward: 0.30 External dimensions: 1035 x 753 x 1400 mm (W x D x H) Internal dimensions: 915 x 580 x 654 mm (W x D x H) Weight: 191 kg (excluding base) Model: AC2-3E8 Air volume: Inlet: 258.2 m3/h / Downhill: 552.2 m3/h / Exhaust: 258.2 m3/h

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1000 mm   grinding width: 600 mm   vertical travel: 350 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1360 mm   table surface (front-back): 550 mm   workpiece load (max): 1000 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1000 /min   spindle revolutions (max): 6500 /min GRINDING TOOL   type of grinding tool: wheel   diameter (min): 500 mm   borehole: diameter: 203 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 91 kW   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (GRINDING)   coolant unit: yes - 4500 operating hours - Very good and well-maintained condition - Machine body: Meehanit cast iron - Linear guides - Diamond dressing roller: Ø135x100x52 - Automatic balancing system - Programmable slow, fast,  ...

pressing area: 3000mm x 1900mm; pressing units vertical: 3; pressing units horizontal: 2; pressing system: elctro - hydraulic; machine length: 3500mm; machine width: 1000mm; machine height: 2600mm; waight: ca. 900kg;

roles: 3; speeds: stepless;

A four-column stamping press Exner with electronics overhauled in 2011 is available. Press force: 340t, pressure cylinder: 1, pressure cylinder diameter: 380mm, ram stroke: 180mm, stroke adjustment: 100mm, installation height: 400mm, ram diameter: 260mm, table dimensions X/Y: 910mm/610mm, machine dimensions X/Y/Z: approx. 1300mm/1600mm/2950mm, weight: approx. 6500kg. An on-site inspection is possible.

51,570 liter ice water tank/pressure tank with insulation Material No. V2A Total height 10200 mm diameter 2900 mm Outer diameter 3480 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Minimum/maximum operating pressure (HP) 0.4 bar Operating temperature 90 °C Cylinder length 6500 mm Year of construction 1994 dished end/ domed end Cylinder: 15cm insulation 4 x sensors Manhole 440 x 340 oval Underbody: Dished end/domed end with foot ring and crane eye

Tronrud Engineering case packer, type: CP30, serial number: TE1002350, year of construction: 2018, 400 V, 3 Ph, 50 Hz, 25 A, weight: 2700 kg, capacity: 30 cases / minute, plastic infeed belt, belt width: (2x) 30 mm, clearance: 340 mm x 380 mm, plastic outfeed belt, belt width: 330 mm, total dimensions: 4650 mm x 5650 mm x 2570 mm.

Two recooling plants of the same size, each with a recooling capacity of 850 KW

diameter:400 mm total power requirement:110 V, 125 W weight of the machine ca.:72 kg

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

weight of the machine ca.:620 kg dimensions of the machine ca.:1000 x 920 x 1550 mm

Manufacturer:Boschert Model: EvoLine 300 Digital Year of Manufacture: 2012 Type of Machine : Manual Punching Machine Technical Specifications - Throat depth: 300 mm - X-travel range: 500 mm - Punching force: 280 kN - Maximum sheet thickness: 6 mm - Quick-change tooling system: TRUMPF compatible Electrical Data - Power supply: 3 x 400 V / 50 Hz - Connected load: 6 kVA - Control voltage: 24 / 230 V - Required fuse: 3 x 16 A Included Accessories - Mechanical stops - Digital readout display Machine Condition The machine was used exclusively in a research and testing environment throughout its life, resulting in very few operating hours. Find more here - / Contact us at -

used bread press Record Erika Automat Classic Q2 30 pcs, checked, with knitted plates, for 30 pieces, weight range from 25 to 120 g, mesh no. A110311, 1.5 kW, 3.8 A, 380 V, 50 Hz

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...

pressure:100 t throat:540 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1000 x 1000 mm pressure of drawing cushion in table:50 t stroke of drawing cushion in table:200 mm die cushion area:710 x 650 mm table height over floor:910 mm ram surface:1000 x 1000 mm capacity of ejector in ram:2 t ejector stroke in ram:200 mm return capacity:19,5 t speed down:400 mm/s speed up:300 mm/s working speed:57,7 mm/s oil volume:650 l power requirement:37,5 kW weight:15,0 t dimensions (WxDxH):1,5 x 2,5 x 4,45 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion / ejector in table:hydraulisch ejector in ram:hydraulisch depth stop:mechanisch

pressure:150 t distance between columns:300 mm stroke:180 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:570x180 / 300x410 mm table height over floor:875 mm side window:180 mm ram surface:180 mm speed down:250 mm/s speed up:160 mm/s working speed:6 - 12 mm/s oil volume:250 l power requirement:11,0 kW weight:2,4 t dimensions (WxDxH):1,3 x 1,3 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich

pressure:40 t distance between columns:495 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:490 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:155 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:115 l power requirement:7,5 kW weight:2,2 t dimensions (WxDxH):1,35 x 1,1 x 2,2 m depth stop:mechanisch foundation pit:nicht erforderlich

pressure:40 t distance between columns:500 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:480 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:150 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:160 l power requirement:7,5 kW weight:2,6 t dimensions (WxDxH):1,1 x 1,4 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick depth stop:mechanical foundation pit:not necessary

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

Fully-automated yeast propagation plant with 2 cylindroconical tanks each 60 hl in stainless steel for yeast propagation and 2 cylindroconical tanks each 60 hl in stainless steel for yeast storage, A conversion and automation was carried out by Esau & Huber in 2007., 2 tanks for yeast propagation each: 80 hl total volume, 2 tanks for yeast storage each: 80 hl total volume, Material: stainless steel, Features: Yeast propagators and yeast tanks have a cooling zone + 1 cone cooling, PT100, weigh cells, circulation pump, yeast aeration

Can filling machine with single filling valve, mobile, on wheels. For semi-automatic filling of 5 liter cans with beer. Capacity: approx. 30 - 35 cans/h, Additional title: Filling machine for liquid foodstuffs into large containers, Capacity approx.: 50 cans/h, Height: 2,0 m, Formats: 5 liter cans, Operation / Control: semiautomatic, Material: stainless steel, Base construction: on wheels

Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner., Additional title: semi-automatic, Capacity: 240 cph, Power: 0.3 kW, Current: 1,85 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 3.2 cbm/h at 6 bar, Length: 5000 mm, Width: 3000 mm, Height: 2300 mm, Operation / Control: SPS S7-200, Features: Single-point, semi-automatic canner Transport unit washer and turner

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt r ...

CONTROLS   CNC controls SIEMENS 840 D SL CHARACTERISTICS HEAT TREATMENT EQUIPMENT   heating method: induction DIMENSIONS / WEIGHTS   space requirements -left/right-: 8044 mm   space requirements -front/back-: 8046 mm   total height: 4000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 624 kVA Power Data:Mains connection power: 624 kVAMains voltage: 400 VRated current: 900 AMains frequency: 50 HzTransformer:Power: 560 kVAVoltage: 400 / 580 VCurrent: 809 / 558 AFrequency: 50 HzConverter:Power: 552 kVA / 450 kWVoltage: 750 VCurrent: 667 AFrequency: 6 – 10 kHzStarting:Power: 50 kWVoltage: 400 VCurrent: 90 AFrequency: 50 HzAuxiliary Equipment:Voltage: 400 VCurrent: 25 AFrequency: 50 HzControl Voltage:Voltage: 230 / 24 VCurrent: 5 / 40 AFrequency: 50 Hz / DC Automation KUKA Roboter

Stick electrodes 2.2 x 350 -Elga: Cromarod 308L for V2A/V4A -Dimension: Ø 68 x 355 mm -Weight: 3 kg

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 22 volts -Power: 5.2 KW -Speed: 2800 rpm -Shaft: Ø 28 mm -Number: 2x available -Price: per piece -Dimensions: 290/H230 mm -Weight: 26 kg

Stick electrodes 4.0 x 450 -Type: 35056 -Weight per package: 5.6 kg

Stack electrode 4.0 x 350 -Type: OK50.40 -Weight per package: 4.4 kg

Stick electrodes 3.2 x 350 -Type: Navalend 25 -Price: per package -Number: 2 packages available -Weight per package: 5.3 kg

Stick electrodes 3.2 x 350 -Type: Navalend 81 -Price: per package -Number: 2 packages available -Weight per package: 5 kg

Stick electrodes 3.2 x 350 -Type: OK 63.31 -Price: per package -Number: 4 packages available -Weight per package: 1.8 kg

Stick electrodes 4.0 x 450 -Type: OK 48.00 -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg

Stack electrode 5.0 x 450 -Type: OK 48.00 -Weight per package: 6.3 kg

Stick electrodes 3.2 x 350 -Type: OK 63.31 -Weight: package 3.1 kg/79 pieces -Package: not full

Stack electrode 4.0 x 450 -Type: OK Selectrode 83.28 -Weight per package: 5.8 kg

Stick electrodes 4.0 x 350 -Type: OK 63.30 -Price: per package -Number: 2 packages available -Weight per package: 4.6 kg

Stick electrodes 2.5 x 350 -Type: P 48S -Price: per package -Number: 9 packages available -Weight per package: 4.5 kg

Stick electrodes 5.0 x 450 -Type: Supercito E51 55 B 10 -Price: per package -Number: 13 packages available -Weight per package: 5.5 kg

Stick electrodes 4.0 x 450 -Type: Extra EY 42 53 Mn B -Price: per package -Number: 29 packages available -Weight per package: 5.4 kg

Stick electrodes 3.25 x 350 -Type: CP 33033 -Analysis: 0.1C-18Cr-8Ni-6Mn remainder Fe. -Price: per package -Number: 4 packages available -Weight per package: 5.2 kg

Forklift motor, electric motor, DC motor, traction motor, drive motor -Voltage: 75 volts -Power: 6.3 kW -Speed: 1400 rpm -Dimensions: 510/320/H280 mm -Weight: 76 kg

Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero