e p used for sale

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   height above floor level: 700 mm SLIDE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 400 mm/s   working velocity min.: 5 mm/s   working velocity max.: 160 mm/s   return velocity max.: 300 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm   distance between columns (H-frame): 2100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 370 kW   mains voltage: 400 V   mains freq ...

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Ocamc, Type: Kopp Elta, Year: 1990, Min.-max. pressing length in mm: 2500, Min.-max. pressing height in mm: 1200, Min.-max. pressing depth in mm: 600, Compressed air bar: 6, Year :1990

Manufacturer: Istel, Type: Eckschrankpresse, Bauyeshr : 1998, Hydraulical/pneumatical: motorisch/pneumatisch, Press hight mm: 1050/900/800, Press depth mm: 1050/900/800, Machine rigging: automatisch, Compressed air bar: 6, Gewicht ca. kg : 2000, Year :1998

Inv. Num. : 8281 Type: KTVF 55x3/1500 Producer: BC ECO TECH Created: 2010 Parameters: Capacity: 200 kg/h Maximum number of film layers: 3

Triblock (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Eurostar Italy, type Uniblock MEC ISO DPS 12-12-1C, 12 rinser nozzles, 12 filling valves, 1 head crown cap, year of construction: 2005, with height adjustment, set up to currently 330 ml with 26 mm crown corks. 2,500 bottles / hour Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Eurostar Italy, Type: Uniblock MEC ISO DPS 12-12-1C, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2005, with hight adjustment, adjusted to bottle 330ml 0,33 l, 33cl mm with 26 mm crown cork. 2,500 BPH

Oil-Insulated Power Transformers for Sale Transformer 1 - Manufacturer: ELIN - Model: TDQ-164A11S9K-99 - Power Rating: 15 MVA - High Voltage: - 121.5 kV (Position 0) - 118.463 kV (Position -1) - 115.425 kV (Position -2) - Low Voltage: 6.3 kV - Current Rating: - High Voltage: 71.3 A (Position 0), 73.1 A (Position -1), 75.05 A (Position -2) - Low Voltage: 1375 A - Frequency: 50 Hz - Cooling: ONAN - Year of Manufacture: 1994 - Status: Out of service since 2022 - Notable Condition: Relatively high CO levels (due to oxidation); insufficient oil inhibitor content. Oil treatment with inhibitor replenishment recommended. Find more here - / Contact us at -

Oil-Insulated Power Transformers for Sale Manufacturer: ELIN Model: TDY-164A11S9K-99 Power Rating: 15 MVA High Voltage: - 121.5 kV (Position 0) - 118.463 kV (Position -1) - 115.425 kV (Position -2) Low Voltage: 6.3 kV Current Rating: - High Voltage: 71.3 A (Position 0), 73.1 A (Position -1), 75.05 A (Position -2) - Low Voltage: 1375 A Frequency: 50 Hz Cooling: ONAN Year of Manufacture: 1993 Status: In operation until 2025 Notable Condition: High CO levels, insufficient oil inhibitor content. Oil treatment with inhibitor replenishment recommended. Find more here - / Contact us at -

Oil-Insulated Power Transformers for Sale - Manufacturer: ELIN - Model: JDR 8000/110 - Power Rating: 8 MVA - High Voltage: - 124.85 kV (Position 9) - 110 kV (Position 0) - 95.15 kV (Position -9) - Low Voltage: 25 kV - Current Rating: - High Voltage: 37.5 A (Position 9), 42.0 A (Position 0), 47.7 A (Position -9) - Low Voltage: 185 A - Frequency: 50 Hz - Cooling: ONAN - Year of Manufacture: 1960 - Status: Out of service since early 2024 - Notable Condition: Low oil inhibitor content and specific resistance; otherwise, oil is in good condition. Oil treatment with inhibitor replenishment recommended. Find more here - / Contact us at -

- Filter surface area: 3m2 - Evacuation: manual Equipment : - Control window with inlet and outlet lighting - Circulation pump - Adjustable dosing pump - Agitator - Connection: butterfly valves, Friedrich n°2 40 Dimensions : - Length: 1750 mm - Width: 700 mm - Height: 1000 mm - In working order

- Membrane: PVC, 2019. - Stainless steel cage, semi-perforated - Frame: Made of steel, on castors - Mesh size: Stainless steel, Friedrich connection no. 2 40 - Central filling Dimensions: - Length: 3400 mm - Width: 1750 mm - Height: 2300 mm

Punching press with coil and strip bar processing Manufacturer: HMS Model: EWZ 03 Year of Manufacture: 1990 Type of Machine: Punching Line Operating Voltage : 380 V Find more here - / Contact us at -

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 116 x 40 mm Truss Type: GNA116x40|SEG5 Agraffe: 5 hooks Clear width: 2,707 mm max. load per pair of trusses 2,400 kg, with the same. distributed load. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,000 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Esmena Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 14,135 mm Number of fields per row of shelves: 05 pcs Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 18 pcs. Number of pallet spaces per row: 90 pcs. Total number of pallet spaces: 90 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Heigh ...

ZM testing equipment

Andouart extruder

Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: ...

Bag Clipper Clipping Machine Hartmann EC140 Clip - Bag clipper from Hartmann - Model EC / 140 - Series: 905 / 150L - with date BBD stamp - Completely made of stainless steel - Year of construction 2004 - Power consumption : 0.6 kW 50 Hz - Voltage: 230 / 400 power plug - Weight 250 kg

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL

Stainless steel tank horizontal Manufacturer Capacity 5000 litres single-walled Metrics: Diameter 1.60 m Length approx. 3.70 m

Technical data of the pallet rack crossbar: Shelving system: Esnova (Jung Heinrich) Type: suitable for Esmena The scope of delivery includes: Pallet rack crossbars, used Material colour: orange Box profile: 120 x 50 mm Truss type: EGN-DUO 120x50x1.5/65 Agraffe: 5 HK (hooks) Clear width: approx. 2,710 mm Max. load per pair of trusses 3,200 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Key data: 7000 kN, 40 mm

Engel E-DUO 740H/740L/700 combi BJ./YEAR 2017 approx. 3871 hrs/h Machine overview: Clamping force: 7000 kN Screw diameter: 40 mm Screw speed: 300 rpm Dosing stroke: 200 mm Control: Engel CC300 Weight: 22 tons Hours: 3871 hours Features: Electric 6-Station Turntable Electrical quick adjustment for the machine plate stroke Two injection units, each with 3-zone screw (D45 mm) 32 zones for hot runner control Electric plasticizing units Full documentation included Status: Ready for use (used) Hours: 3871 Condition of the machine: Already disassembled Defects or missing parts: No known defects, regularly serviced Technical documentation: Complete and available (can be consulted on site)

Mobile 290L vessel incl. discharge with valve, inspection glass, etc.

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Esmena Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 14,135 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row: 45 pcs. Total number of pallet spaces: 45 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 3,000  ...

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Esmena Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 30,977 mm Number of fields per row of shelves: 11 pcs. Number of levels plus ground level: 03 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 132 pcs. Total number of pallet spaces: 132 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg The scope of delivery includes: 12x Pallet rack stand, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 6,00 ...

Elma Troyan motor Type: T 100LA 8/4 CB B14F 130-481 380 volt 0,7/1,1 kW 700/1415 rpm

Elprom motor Type: 112M4 B14F165 4 kW 230/400 volt 1420 rpm 30 kg

Efacec universal motors Type: BF5 132M 848 200/230/220/240 volt 2,2/3,3 kW

Eldrive motor Type: EF 63B 4 1360 rpm

Elco Cozzi motor Type: CN400 2,2 kW 220/380 volt 1400 rpm

Type: T 132H 4B 220/380V 7,5 kW 1445 rpm

Type: C132MB 7,5 kW 380V - 16 amp

Key data: 110 t, 3100 mm, 2550 mm

Printing capacity: 110 ton Bending length: 3,100 mm Stand width: 2,550 mm Back gauge: 1,500 mm Stroke length: 150 mm Projection: 250 mm Feed speed: 100 mm/sec. Working speed: 8 mm/sec. Retraction speed: 65 mm/sec. Control: ESA Kvara S630 Touch Equipped with: - Foot pedal - Various tool sets - Light curtain safety Merlino - Controls renewed in 2018 Country of origin: Netherlands Motor power: 7.5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8,700 kg

Key data: 300 t, 4300 mm, 3700 mm

Printing capacity: 300 ton Bending length: 4,300 mm Stand width: 3,700 mm Back gauge: 550 mm Stroke length: 300 mm Projection: 450 mm Feed speed: 120 mm/sec. Working speed: 10 mm/sec. Retraction speed: 120 mm/sec. Control: Delem DA65 Equipped with: - Y1, Y2, X&R - Axis Controlled - CNC hydraulic crowning - Various sets of bending tools - Safety light cabinet Lazer Safe - Operating instructions and machine documents Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21,500 kg

Elmo Rietschle VC300 Vacuum pump 3x Elmo Rietschle oil lubricated rotary vane pumps, 5.5Kw, 300 M3/H flow rate

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation ...

An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3 ...

An HMS punching machine is available. Pressing force: 250t, stroke height: 40mm, installation height: 450mm, ram adjustment: 20mm, stroke rate: 120 strokes/min, overall system dimensions X/Y/Z: approx. 17000mm/8000mm/3500mm. Including coil and strip processing. Documentation available. On-site inspection is possible. Expected to be available from September 2025.

A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible.

Hitec, Z-Elevating conveyor belt., Dimensions in the photo album., More information on request.

Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.

fabric-no.: 202 395 working length: 2550 mm output: 2000 KN tracking travel: 13 mm safety distance: 176 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.