e p used for sale

Connectors, plugs, sensor modules -Manufacturer: Wago, Winsta ECBT2 connectors, 25 pieces -Connector: Wago 3-pin with strain relief housing -Quantity: 6 boxes of 25 pieces each available -Price: per carton -Cardboard dimensions: 200/185/H55 mm -Weight: 0.6 kg/carton

2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 – used - : Price per piece from location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of Make: 2007 Q400.00m3/h H 14,00m N 1460 1/min Condition: good Available: immediately Location: Frankenberg camp / Saxony

Power resistor, wire potentiometer, resistor, potentiometer, dual potentiometer, regulator -Manufacturer: Elvo, Potentiometer controller with on/off switch -Type: ED 1.5 G -Voltage: 220 V 1.5 A 330 W -Dimensions: 135/75/H100 mm -Weight: 0.3 kg

Manufacturer: ETSCHEID Content: 1500 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit Condition: very good

Product number: 2995 Type: HP-300 Belt width: 300 mm Power: 3 x 400V, 50Hz, 16A Dimensions: 1650 x 700 x 1600 mm Adjustable height between belts

Optical separator, Brand: Ecorema, Model: Aisorter X-1200, Year: 2020, Power: 4500 W

Key data: 635 mm, 510 mm, 460 mm

CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions

Centrifugal pump, water pump, block pump, spiral casing pump -Manufacturer: Ebara, centrifugal pump type 2CDX/A 70/12 -Flow rate: 20-80 l/min -Engine power: 0.9 kW -Speed: 2800 rpm -Pipe connection see photos -Dimensions: 385/210/H250 mm -Weight: 13.4 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: MZ 07 21 A4 -Dimensions box: 125/80/H25 mm -Weight: 0.1 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: IA 08 01 00 -Dimensions box: 100/75/H10 mm -Weight: 0.1 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: B 12 01 04 -Dimensions box: 125/80/H25 mm -Weight: 0.1 kg

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 6,400 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed Steam extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Alfa Laval, air-operated double diaphragm pump -Type: DL25-AA-EET-Q -Flow rate: l/min -Discharge pressure: bar -Total dimensions: 240/230/H300 mm -Weight: 8.7 kg

Hoza EMU Punch This machine is ideal for punching out small moulded parts made of paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged knives or strip steel cuts can be inserted into the machine. Knife stroke: 30 mm Max. die-cutting format: 150 x 100 mm Weight: approx. 150 kg Colour: hammered blue Dimensions: 450 x 360 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Depa, air-operated double diaphragm pump -Type: DL25-FA EEE P -Flow rate: l/min -Discharge pressure: bar -Dimensions total: 340/240/H325 mm -Weight: 9.6 kg

Bottling line for breweries – capacity: 15,000 bottles per hour This bottling line was installed in 2015 by the German manufacturer Hormes as part of a complete brewery. The entire bottling line has been dismantled and is available. The production capacity is 15,000 bottles per hour, ideal for 0.33-liter non-returnable glass bottles. Components of the filling line: New glass lifters | Hormes • Pallet size: Suitable for new glass pallets measuring 1000 mm x 1200 mm • Drive: Electrically operated chain hoist for efficient lifting operations • Truss length: approx. 4,500 mm Fully Automatic Rinser | Hormes • Capacity: Up to 15,000 bottles per hour • Nozzles: At least 36 spray nozzles, matched to a specific bottle size • Cleaning: Cleaning the inside of the bottles with fresh water, spraying time approx. 1.5 sec., draining time approx. 5 sec. Automatic Bottle Fi ...

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, immersion pump -Cooling water pump: coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm -Dimensions total: 500/340/H880 mm -Weight: 74 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

1 Zangen Klebebinder - 1-Clamp Perfect Binder CP Bourg BB-3002 EVA Year 2008 - Serial-No. 61300520 Zählerstand / Counter 118615 Buchrückenbeleimung / Spine Gluing Hotmelt Seitenbeleimung / Sight Gluing Hotmelt Fräswerk mit Absaugung / milling section with extraction Frästiefe einstellbar / milling depth adjustable Technische Daten / Technical Details: Papierformat / Sheet Size min. 100 x 201mm - 385 x 750mm Umschlagformat / Cover Size min. 100 x 201mm - max. 385 x 750mm Buchstärke / book thickness min. 1mm - max. 60mm Umschlagstärke / cover weight range 80 - 300 g/qm Umschlagstapelhöhe / cover pile hight max. 80mm Leistung / speed max. 650 Cycles/h Abmessungen / dimensions 2.020 x 2.400 x 1.500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be t ...

1-Zangen Klebebinder Kaltleim - 1-Clamp Perfect Binder Cold Glue Müller Martini Econobinder EB II Year 1973 - Serial-No. Serien-Nr. 4700.1 Speed (mechanic) 800-2400 tact/hour Format min. 90 x 60 x 3mm without cover Format min. 90 x 80 x 3mm with cover Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Palettenstretchmaschine - Pallet Wrapping Machine W&W EFA5 1450 Year 1995 - Serial-No. 9503264-943-3144 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Centrifugal pump, water pump, block pump, volute casing pump -Manufacturer: Ebara, centrifugal pump type CDXHM/A 200/20 -Flow rate: 80-250 l/min -Motor power: 1.5 kW -Speed: 2850 rpm -Pipe connection: see photos -Dimensions: 445/210/H240 mm -Weight: 15.7 kg

PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control -Type: Modicon TM241CEC24T -Input module: Modicon TM3DI8 -Dimensions: 175/90/H100 mm -Weight: 0.6 kg

PLC controller, electronic module, PLC control -Manufacturer: Schneider Electric, PLC control -Type: Modicon TM221CE24T -Number: 2x controllers available -Price: per piece -Dimensions: 110/105/H75 mm -Weight: 0.4 kg/pc.

Filmbelichter / Film Processor ECRM 360 Laser Red Serial-No. 4943 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Practice door for door opening training, door opening techniques, training door -Practice door: for door opening training -Purpose: to train rescue workers in door opening techniques -Material: sturdy steel door with frame and base -Overall dimensions: 1280/1230/H2200 mm -Weight: 200 kg

PLC controller, electronic module, PLC control, analog input/output module, temperature input module -Manufacturer: Schneider Electric, PLC controller Analog input/output module -Type: Modicon TM3TM3 -Quantity: 1x control unit available -Dimensions: 95/90/H30 mm -Weight: 0.1 kg

Pallet truck, pallet truck, stacker, pedestrian pallet truck, forklift truck -Connection: 380 volts -Load capacity: 1200 kg -Lifting height: 990 mm -Dead height: 1450 mm -Width: 670 mm -Length: 1400 mm -Tin length: 920 mm -Empty weight: 300 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 4 m -Connector: 3-pin -Quantity: 1x hose package available -Price: per piece -Dimensions: 340/340/H70 mm -Weight: 1.8 kg/pc.

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 4 m -Connector: 5-pin -Transport dimensions: 360/340/H80 mm -Weight: 1.7 kg

Planetary Manufacturer: Brevini Model No.: B2007962 ED2150 The device is NEW and fully functional. see pictures for more details.

Pneumatic cylinders -Stroke travel: 40 mm -Piston diameter: 50 mm -Piston rod: 20 mm (connection M 8 x1.5 thread) -Total length: 80 mm -Total length extended: 120 mm -Air inlet and outlet: adjustable -Quantity: 18 pieces available

pneumatic piston pumps, airless high-pressure pumps, air motors -spare part -Weight: 100 kg

Power converter, current inverter, current transformer, drive inverter, controller -Perfomance: -Input: 380/415 V -Output: 460 V DC Serial No.: 05603 Price: per piece -Weight: 7.5 kg

Number of axes: 5 Feed speeds in the X/Y/Z axis: 500/420/380 mm Feed rates in the C/B axes: 180°/360° Dimensions of the work table (L x W): 500 x 380 mm Maximum workpiece weight: 350 kg Spindle power: 15 kW Maximum spindle speed: 18000 rpm Tool magazine capacity: 30 pcs. Overall dimensions (L x W x H): 3360 x 2550 x 2600 mm Total weight of the DMU 50 eVolution machine: 6000 kg

Machine almost unused Pressure: 60.0 t Square steel: 35.0 mm Technical specifications Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in sqmm: Ø28 in 15 / Ø38 in 11 mm Projection: 220 mm Flat steel: 200x20 / 300x15 mm Y0798Jol Knife length: 317 mm Oil capacity: 45.0 ltr. Working height: 940 / 1140 mm Stroke rates per minute: max. 26 Working stroke: 55.0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimensions HxWxD: 1510 x 590 x 1570 mm

Key data: 180 mm

First-class renovated extrusion recycling plant made by EREMA Intarema 2018 TVEplus for the processing of post-consumer polyethylene and polypropylene, capacity up to 2,400 kg/h, built in 2019 for sale. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

ECKERT SZAFIR BL2 plasma cutting machine was built in 2022 in Poland by Eckert AS Sp. z o.o. The machine, designed for precision cutting sheet metal made of structural steel, stainless steel and aluminium, is distinguished by its large 6 metre long and 2 metre wide sectional work table. The large area of the table makes it possible to efficiently machine a single oversized workpiece or multiple sheets at the same time, guaranteeing a high level of user comfort through the ongoing elimination of contamination. In addition, the portal structure based on a welded steel profile ensures excellent stability of the machine geometry, which does not become unstable under heavy loads. The SZAFIR BL2 plasma cutting machine has worked approximately 867 hours to date. Technical specifications of the ECKERT SZAFIR BL2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W ...

Connected load 380V 3.5A Pneumatic connection 8 bar Total height 3600 mm Overall length 4400 mm 1x fixed stop 2x pressure beams - can be clamped over rack 2x pressure cylinder stroke 100 mm pneumatically clampable 1x manual control for transverse and longitudinal pressure and loosening presses 1x medium pressure beam 600 mm height (working area) 1x additional longitudinal pressure cylinder 1x slanted window pressing device

Position switch, drive for rotary axis actuation, electrical head with rotary axis -Type: TP1-4131A024M Quantity: 2 available Price: per piece -Weight: 0.5 kg

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 500 mm -without: Baking -Camlock mount: Ø 196 mm short taper 11 -Bolt circle: Ø 204 mm -Weight: 80 kg

USED EVERGREEN GABLE TOP FILLING AND CAPPING MACHINE YEAR 2007 Item #: Usm-210 Category Gable Top Machines Evergreen GTL-30 Gable top Filling Machine, Year 2007, Speed 2400 Packs per hour, cold filling for fresh products

Hydraulic pressure switch, pneumatic pressure switch -Type: EDS 1100-050-1-009 -Pressure: 25 bar -Operating voltage: 24 VDC -Signal output: 0-5 VDC -Weight: 0.3 kg

Hydraulic pressure switch, pneumatic pressure switch -Type: EDS 1691-NC-016-000 -Pressure: 16 bar -Operating voltage: 24-20 VDC -Signal output: 4-20 mA Price: per piece Quantity: 2 available -Weight: 1 kg

plug socket -5x: 7000-08351-0000000 -5x: 7000-08321-0000000 -4x: 7000-08361-0000000 -5x: 7000-08341-0000000 -5x: 7000-08371-0000000 Price: complete -Weight: 2 kg

Heinen EPC/II Diana Control EM1 Interface Module (PLC) for Jagenberg Diana Pro. Used and tested. Type: 63430-1.0-000 / SN 155 /

Heinen EPC/II Diana Control BM1 063425-1.0-000 Interface Module (PLC) for Jagenberg Diana Pro. Used and tested.

Stainless steel pipe bend, welded bend -Size: 40 x 1.5 mm 90° Price: complete -Quantity: 39 pieces -Weight: 7 kg