126,721 used machines on RESALE, but how to find them? Machine Search
Frame made of full stainless steel with floor scale, also made of stainless steel max. 1500 kg, for filling big bags
PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.
Eckeneinziehmaschine / Corner Pulling Machine BEIER EZf Serial-Nr. 3555 Manuelle Bedienung / Manuell Operation
Electric walking forklift, ride-on pedestrian stacker STILL type EGV 14Fabr. No. 330221900092 year of construction 2009Nominal load capacity 1400 kgLifting height 5475 mmFork length 1160 mmTotal length 1930 mmTotal width 860 mmOverall height 2330 mmOperating voltage 24 volt- Triplex mast with 1830 mm Free lift- 689.3 operating hours read- Battery from year of construction 08/2008, type 3 PZS 315 (24Volt / 315Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1440 kgGood condition, battery bad. Surcharge
Electric walker trucks, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EJE 116Masch. No: 90281103 year of construction 2007Nominal load capacity: 1600 kgLifting height: 200 mmFork length: 1150 mmOperating voltage: 24 VoltTotal length: 1750 mmTotal width: 730 mmHeight with drawbar: 1300 mm- Battery from year of construction 2013, type 24V 2PzS 250 (24 Volt, 250 AH)- Battery automatic charger- 5575 operating hours read. Weight approx. 560 kggood condition; used
Electric walking forklift, pedestrian stacker JUNGHEINRICH type EJC 14G-115-290ZTSerien. No. 80582366 year of construction 1997Nominal load capacity 1400 kgNominal lifting height 2900 mmFork length 1150 mmTotal length 2000 mmTotal width 850 mmOverall height 1900 mmOperating voltage 24 volt- Duplex mast without free lift- 5721 operating hours read- Battery from year of construction 2014, type 24 V 3PzS 345 (24Volt / 345 Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1050 kggood condition; used
Electric walking forklifts, pedestrian stackers JUNGHEINRICH type EJC 214 series. No. 90334640 year of construction 2009Nominal load capacity 1400 kgNominal lifting height 3200 mmFork length 1150 mmTotal length 2000 mmTotal width 810 mmOverall height 2050 mmOperating voltage 24 volt- Duplex mast with 1600 mm free stroke- 4356 operating hours read- Battery from year of construction 2009, type 3PZS 375 (24Volt/ 375 Ah)- Automatic charger Jungheinrich 24 Volt, 40 Ampere- TÜV test UVV until 11.2025Weight 1200 kggood condition; used
Electric walking forklift, low-floor pallet truck, ant, pedestrian stacker JUNGHEINRICH type EJE 22G-20-235-56 (L)Masch. No.: 80405795 year of construction 1996Nominal load capacity: 2200 kgLifting height: 200 mmFork length: 2350 mmOperating voltage: 24 VoltTotal length: 3050 mmTotal width: 690 mmHeight with drawbar: 1350 mm- Battery from year of construction 2007, Type 2 EPZS 230 (24 Volt, 230 AH)- Battery automatic charger- 8890 operating hours read. Weight approx. 560 kggood condition; used
Electric walking forklifts, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EME 112Masch. No: 90145339 year of construction 2005Nominal load capacity: 1200 kgLifting height: 200 mmFork length: 1170 mmOperating voltage: 24 voltsTotal length: 1550 mmTotal width: 700 mmHeight with drawbar: 1300 mm- 2 pieces traction batteries NEW from year of construction 2024, type 12 volts, Ah 55- integrated automatic charger, type E 230 G 24/6 (24 volts, 6 amps)Weight: approx. 175 kggood condition; used
-Year 2005 -Suitable for Heidelberg Speedmaster 52 -Size: Max. 370x520 mm, Min. 100x100 mm -Speed: Max. 15000 /Hours -Adjustable Height -Delivery belt with adjustable speed and height
Width 34 cm Year of construction 2000 electric punching and binding machine Electric Punching - Manual Tying Split 3:1 Table model Delivery date: short-term Price on request. We supply and install worldwide.
- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 200 mm high: 1150 mm weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,8 x 0,73 x 1,3 m incl. charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 1600 kg fork length: 1450 mm stroke height: 200 mm high: 1150 mm weight of the machine ca.: 0,68 t dimensions of the machine ca.: 2,05 x 0,72 x 1,15 m incl. charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working height 11 m, working range 6.8 m, load capacity 230 kg, 350° swivel radius, with additional knuckle boom on the work basket 180°, jib vertical working range 144°, total width 122 cm, transport height 201 cm, transport length 574 cm, machine weight 7100 kg
Screw Diameter: 50 mm // Throughput: 150 kg/h
PROCESOR ECO LOG MODEL 580F BUILT IN 2021 OPERATING HOURS 1100
Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg
Offer 25471 Specifications: - Compressive force 75 t - Projection approx. 300 mm - Table size approx. 800 x 600 mm - Height-adjustable table - Stroke adjustment approx. 16 - 140 mm - Plunger adjustment 80 mm - Stroke rate 80 rpm - Pneumatic connection - Drive 400 V - Space requirement approx. W 1800 x H 2450 x D 2000 mm - Weight approx. 4000 kg
Key data: 60 t, 370 mm, 10 mm
Eccentric Press Compressive Force 60 Ton Equipped: -Hydraulic clutch -Hydraulic overload protection
stroke: 16-140 mm pressure: 75 t weight: 4,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen
pressure: 40 t stroke: 150 mm serial number: 100091 : 2 : Druck & Hub verstellbar pressure: 25 t weight: je 1,5 t safety light frame: ja bei beiden The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Camera module, max. passage width 650mm, max. 420mm camera scan width, own drive with servo motor, vacuum transport belt at the top, module length 800mm, order evaluation and documentation, connection to HHS quality assurance system possible.
The machine is in good technical condition, testing is possible after prior agreement. We have a video of the machine available.
A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible.
An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible.
(1992) 125t Müller Eccentric Press Versatile Mechanical Forming Solution This eccentric press offers a nominal pressing capacity of 125 tons, designed for reliable and efficient mechanical forming operations. With an adjustable ram stroke range of 20–120 mm and an additional 80 mm ram adjustment, the machine provides flexible setup options for various tooling and production requirements. Technical Details Machine Type: Eccentric Press Manufacturer: Müller Machine Number: 3010 Year of Manufacture: 1992 Model: EPR/RH125ST Nominal Capacity: 125t Ram Stroke (Adjustable): 20 – 120 mm Ram Adjustment: 80 mm Total Weight: 9,000 kg Motor Power: 11 kW Operating Voltage: 380 V Safety Distance: 185 mm
(1983) 125t Müller Eccentric Press Heavy-Duty Mechanical Press Robust Eccentric Press from 1983 with a 125 t nominal force and adjustable ram stroke, ideal for precision forming and heavy-duty production. Technical Details Machine Type: Eccentric Press Manufacturer: Müller Machine Number: 1204 Year of Manufacture: 1983 Model: EPR/R125 Normal Nominal Force: 125t Maximum Nominal Force: 135t Ram Stroke (Adjustable): 20 – 120 mm Ram Adjustability: 80 mm Weight: 8,250 kg Motor Power: 11 kW Operating Voltage: 380 V Safety Distance: 205 mm Brake System: Equipped with an Ortlinghaus auxiliary brake system
(1974) 160t Edelhoff Eccentric Press Eccentric Press for Heavy Stamping and Forming This 1974 Edelhoff mechanical press offers a robust 160-ton capacity and a highly adaptable stroke range, making it suitable for a wide variety of industrial metalworking applications. Technical Details Machine Type: Eccentric Press Manufacturer: Edelhoff Model: AZR 160 Machine Number: 8069 Year of Manufacture: 1974 Nominal Force: 160t Stroke Adjustment: 30 – 160 mm Ram Adjustment: 75 mm Stroke Rate: 45 strokes/min Electrical System: 380 V
(1979) 100t Heilbronn Eccentric Press High-Speed Eccentric Press for Precision Metalworking This Heilbronn eccentric press combines a high stroke rate of 60 per minute with a versatile adjustable ram stroke, making it ideal for rapid stamping cycles. Technical Details Macine Type: Eccentric Press Manufacturer: Heilbronn Model: EPR 100 Year of Manufacture: 1979 Nominal Force: 100t Stroke Rate: 60 strokes/min Ram Stroke (Adjustable): 6 – 100 mm Ram Adjustment: 80 mm Overrun Time (Stopping Time): 0.140 seconds Safety Distance: 224 mm Motor Power: 5.5 kW
(1998) 125t Ruhrmann Eccentric Press Modern Precision Eccentric Press This Ruhrmann press is a relatively modern addition to your lineup, offering a solid 125-ton capacity and a versatile stroke range. Technical Details Machine Type: Eccentric Press Manufacturer: Ruhrmann Model: ESR 125 H Year of Manufacture: 1998 Pressing Capacity: 125t Stroke Rate: 50 strokes/min Ram Stroke (Adjustable): 8 – 120 mm Ram Adjustment: 80 mm Shut Height: 450 mm Motor Power: 12.5 kW
Complete falling film vacuum evaporator, previously used for infant milk, consisting of 5 bi-thermal effect TVR Evaporator with a direct steam injection (DSI) pasteurizer and an expansion chamber. Still mounted in the Danone plant in France till end of March 2026. The product feed rates in the installation can vary between 14 and 23 t/h with a comparative temperature between 78 and 54°C from the 1st to the 5th effect. The system is heated primarily by injecting steam into the thermo-compressor. The preheating of the incoming product is achieved via tubular heaters supplied by vapours drawn from the beams. A direct steam injection pasteurizer and expansion chamber is provided to pasteurize the product in a range of 118 to 133 °C., Line modified in 2000 to replace the mixing condenser with a tubular condenser and installing the heat treatment with direct steam injection., The evaporator ...
Press height 140 mm Press force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per work stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg
weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 3200 mm high: 2060 mm weight of the machine ca.: 0,8 t dimensions: 1,95 x 0,86 x 2,06 m Pallet truck with inklude charger ve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 1000 kg fork length: 1250 mm stroke height: 1600 mm high: 1940 mm weight of the machine ca.: 0,4 t dimensions: 1,69 x 0,78 x 2,09 m Pallet truck with - new 12-volt battery - charger - electric lift - manual drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 10 t
Various spare parts for eccentric press - brands SMERAL and VSS KOSICE
Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm -Stroke rate: 105 strokes/min -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Protrusion: 180 mm
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Rexroth, hydraulic pump from pedestrian stacker JungheinrichTyp ERC 205 -Gear pump: Type 0541 100 054 -Drive: 24V 3kW -Number: 2x unit available -Price per piece -Dimensions: 140/130/H330mm / 150/130/H330mm -Weight: 14.3 kg / 13.9 kg
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from order picking forklift type ECE 20 -Hydraulic pump: Type 50125677 -Motor: Type AU3480 24V 1.5kW -Dimensions: 200/175/H360 mm -Weight: 9.7 kg
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from order picking truck Jungheinrich type EJE-KmS -Hydraulic pump: type 0 542 015 145 -with: tank and control valve -Dimensions: 180/160/H370 mm -Weight: 11 kg
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic unit from Jungheinrich order picking forklift type EJE-KmS 16G-24-140-56 -Hydraulic pump: Type 0 542 015 145 -Motor: Type 1 547 220 506 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 210/180/H370 mm -Weight: 11 kg/pc.
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 118 -Hydraulic pump: type 50125677 -Motor: Type AU3480 AMJ5729 24 V 1.5 kW -with: tank and control valve -Number: 4x unit available -Price per piece -Dimensions: 200/180/H370 mm -Weight: 10 kg/pc.
maximum number of results exceeded
please refine your search
