e p used for sale

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available - Price: per piece -Dimensions: Ø 75 x 360 mm -Weight: 2.8 kg/pc.

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valve: MS6-EM1-1/2 -Filter control valve: M56-LFR-1/2-D7-ERM-AS -Switching valves: M56-EE-1/2-V24 M56-EE-1/2-V24-S -Pressure build-up valve: M56-DL-1/2 -Branch module: M56-FRM-1/2-Y -Individual components: see photos -Number: 3x maintenance unit available -Price/Distribution: per piece, complete unit -Dimensions: 440/120/H340 mm -Weight: 5.2 kg/pc.

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø100 x 80 mm -Item No.: 832 393 65 -Heating power: 1040 W -Voltage: 220 V -Quantity: 1x heating cable included -Transport dimensions: 170/160/H80 mm -Weight: 1.2 kg

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 150 L -Operating pressure: 11 bar -Dimensions: 1460/510/H530 mm -Weight: 92 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Elektron, Manometer: 0-6 mWS / 0-0.6 bar, unused, original packaging -Type: HD997A0 -Item No.: 6AC 5080-71 -Quantity: 1x pressure gauge available -Cardboard dimensions: 140/115/H50 mm -Weight: 0.7 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Elektron, Manometer: 0-0.6 bar, unused, original packaging -Item No.: 6AC 5080-71 -Quantity: 1x pressure gauge available -Cardboard dimensions: 140/115/H50 mm -Weight: 0.7 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Elektron, Manometer: -100-0 kPa / -1-0 bar, unused, original packaging -Size: Ø 100 mm -Number: 18x pressure gauges available -Price: per piece -Cardboard dimensions: 135/110/H50 mm -Weight: 0.5 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Elektron, Manometer: 0-60 MPa / 0-600 bar, unused, original packaging -Size: Ø 100 mm -Number: 11x pressure gauges available -Price: per piece -Cardboard dimensions: 135/110/H50 mm -Weight: 0.7 kg/pc.

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Eaton, NH fuse switch disconnector 160 A -Type: GSTA00-160 NH00-160A -Quantity: 1x load break switch available -Dimensions: 170/105/H850 mm -Weight: 0.7 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, motor protection switch, power switch, power disconnector, auxiliary switch, main switch, on/off switch, cam switch -Manufacturer: Schneider Electric, circuit breakers, load break switches -Type: NSC400/630 K -Rotary drive: with extension -Dimensions: 255/140/H440 mm -Weight: 5.8 kg

Inkjet printer, label printer, printer, printer cartridge, print cartridge, ink cartridge -Handover: in its current condition as inspected -Best before: 09/2021 -Manufacturer: REA Elektronik, REA JET HR Multiple Black ink cartridge -Item No.: 054.980.201 -Color: black -Number: 39 cartridges available - Price: per piece -Cardboard dimensions: 120/60/H25 mm -Weight: 0.1 kg

Servo motor, electric motor, DC motor, stepper motor, compact asynchronous motor -Manufacturer: SEW Eurodrive, DC geared motor type ECG-A2M-09-A-K0 -Voltage: 24V -Translation: 9 -Shaft: Ø 16 x 26 mm -Technical data: see photo of the nameplate -Quantity: 1x motor available -Dimensions: 230/48/H48 mm -Weight: 1.2 kg

Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 -6x ALCAN 1.2 mm S-ALmg 5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/roll Price: per piece

Geared motor, electric motor, three-phase motor, right-angle geared motor -Speed: 124 rpm -Power: 0.75 kW -Brake -External fan -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 8x motors available Price: per piece -Dimensions: 620/248/H270 mm -Weight: 50 kg/piece

Grinding drum (rubber air drum) Original product of the company KED, (Kurt Ehemann) -Type: G 10 x 15 for hand drill -consisting of: base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 100 mm -Grinding length: 150 mm -Length of base body: 190 mm -Available in other sizes upon request: -e.g. Diameter: 40 mm, 60 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm -e.g. grinding length: 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 400 mm, 500 mm -also available as a brush grinding element. -Furthermore, we also carry general husband spare parts. -Price of grinding drums in the attached PDF file

Number of motors: 2 Stück 0: 3000 mm Control: ja/CNC loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm -------------------------------------- For wooden glazing beads, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Includes 1 pc. center support. - Pneumatic clamping of the components. - Exenso DS3 positioning control with 15 touch panel display in a dustproof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list (data set according to specifications) - Processing of measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB ...

Saw blade diameter vertical: 550 mm Saw blade diameter horizontal: 500 mm Max. profile height: 250 mm Max. feed: 830 mm Digital angle displays for material stop and tilting of both sawing units Pneumatic material tensioners Minimum quantity spraying device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

-Metal Detector -Manufacturer: S+S Separation and Sorting Technology GmbH - Type: Ecoline 750/300/100 -Mains voltage: 230 / 115 VAC - Frequency: 50/60 Hz

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011

Manufacturer: Ernst, Type: 830-2, Monting of the machine: längs / längs / längs, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 1.400 x 3.150, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2 - 10, Belt 2 shoe unit: yes, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 2 - 10, Band 3 Leistung kW : 18, Band 3 Schleifbandgeschwindigkeit m/s : 1 - 7, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 8 - 30, Vacuum table: yes, Brushing unit: 3 kW, Diameter/ brush bristles: 200,

Manufacturer: Ernst Funierschleifautomat, Type: 840-2, Year: 2003, Monting of the machine: Quer/lang/lang/lang/Bürste, Sanding width mm: 1305, Sanding hight mm: 3-120, Number of sanding belts: 4, Sanding belt dimensions: 2620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: no, Band 1Querschleifaggregat: yes, Band 1 Leistung kW : 18,5, Band 2 Schuhaggregat: Simplex Schuh, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 30, Band 3 Kombiaggregat Walze/Schuh: Simplex Schuh, Band 3 Leistung kW : 30, Band 4 Kombiaggregat Walze/Schuh: Duplex Schuh, Band 4 Leistung kW : 37, Elektronische Tastung mm: yes, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 13,5-60, Feeding engine kw: ca.4, Constant table hight: 880, Vacuum table: yes, Segment sanding shoe: yes, wast cleaning: yes, Ionising: yes, Weight in kg: 10200, Year :2003

Manufacturer: Cefla, Type: Easy 2000, Year: 2006, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 10-60, Work piece length min-max mm: 100-3000, Overall length metre: ca.25, Feeding speed m/min: 3-5, Water-based paint line: yes, Inlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: yes, Circulating-air drier mm length in mm: ca.12000, machine ready for demonstration: yes, FREE TEXT: inkl 2 Lampen UV 120 Watt Trockner/12 Kremlin Pumpen /Pistolenwaschgerät und walzmaschine Sorbini Smartcoater, Year :2006

Manufacturer: 2 Lakierroboter Yaskawa, Type: ENCM und ERCS, Year: 2005/2007, Control: Yaskawa, Spraying heads - total: 2, Working width mm: 1500, Conveyour system: Transportwagen gesteuert, gesteuerte Achsen: 6, Ex-geschützt: yes, S-Achse Grad [°]: +/- 170, L-Achse Grad [°]: +/-120-65, U-Achse Grad [°]: +/-205-165, R-Achse Grad [°]: +/-190, B-Achse Grad [°]: +/-145, T-Achse Grad [°]: +/-360, Max.Tragkraft kg: 5, Max Drehmoment Nm: 3/8, Stainless steel design: yes, Spraying stations: 2, Colour circuits: 1, Laquer circles: 1, FREE TEXT: beide Anlagen Roboter sind gekoppelt einem Transportsystem für den Tisch, Year :2005/2007

Grinding drum (rubber air drum) Original product of the company KED, (Kurt Ehemann) -Type: G 7.5 x 25 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 75 mm -Grinding length: 190 mm -Length of base body: 250 mm -Holding bore: 30 mm -Quantity: 4 available -Price: per piece -Weight: 1.1 kg Available in other sizes upon request: e.g. diameters 40 mm, 60 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm Also available as brush grinding elements. Furthermore, we also carry general husband-related spare parts. Price of grinding drums is shown in the attached PDF file.

Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 6 x 17 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 60 mm -Grinding length: 130 mm -Length of body: 175 mm -Location hole: 20 mm -Number: 6x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 7.5 x 20 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 75 mm -Grinding length: 150 mm -Length of the body: 200 mm -Location hole: 25 mm -Number: 3x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 7.5 x 20 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 75 mm -Grinding length: 150 mm -Length of the body: 200 mm -Mounting hole: 30 mm -Number: 3x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 7.5 x 15 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 75 mm -Grinding length: 100 mm -Length of main body: 150 mm -Location hole: 25 mm -Number: 5x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 20 x 25 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 200 mm -Grinding length: 200 mm -Length of main body: 250 mm -Mounting hole: 30 mm -Number: 1x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 12.5 x 15 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 125 mm -Grinding length: 100 mm -Length of main body: 150 mm -Mounting hole: 30 mm -Number: 5x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 20 x 50 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 200 mm -Grinding length: 450 mm -Length of the body: 500 mm -Location hole: 40 mm -Number: 1x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 12.5 x 20 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 125 mm -Grinding length: 200 mm -Length of main body: 150 mm -Mounting hole: 25 mm -Number: 1x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motor EMOD type EEDF 65S/4 -Manufacturer: Gearbox Getriebebau Nord type SK.5301 SU-63 S/4 ED -Speed: 4.1 rpm -Power: 0.12 kW -Construction: hollow shaft angle -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 360/135/H190 mm -Weight: 15 kg

Two similar CNC rotary transfer machines Winema are available. 1) Winema RV20 Evolution Flexmaster, year of manufacture: 2016, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC. Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. 2) Winema RV20 Evolution Flexmaster, year of manufacture: 2015, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC (Sinumerik). Including material handling, Knoll turbo filter system, cooli ...

Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement.

cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: flat: 230 x 200 mm capacity 60 degrees: round: 175 mm capacity 60 degrees: flat: 170 x 100 mm cutting speed: 18 - 110 m/min vice: max. 350 mm dimensions of saw-band: 3370 x 27 x 0.9 mm engine output: 1.5 / 1.8 kW weight of the machine ca.: 880 kg range L-W-H: 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF) The data for  ...

pressure: 36.0 t stroke: 250 mm flat steel: 200 x 10 mm working feed: 6.0 - 24.0 mm/min return speed: 60.0 mm/min work height max.: 900 mm table:: 580 x 1170 mm total power requirement: 4.1 kW motor: 400 Volt 50 Hz oil volume: 60.0 ltr. weight: 1100 kg range L-W-H: 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on request Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting - Several/various bending tools - Infinitely variable adjustment of bending speed and pressing force - 1x freely movable double foot switch - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dishwasher Hobart UX 30 ESB Universal dishwasher 3 washing programs Easy Clean Concept Connection 400 V, 32A-CEE plug, Used machine

Key data: 800 mm, 650 , 650

We have various spare parts in stock for the following machine. Please inquire! DMU 80E Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410

Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled)

Find more here - / Contact us at -

Size: 530 mm Equipments: Coate with IR and UV dryers 21 Inch max. width shee roller flood coater with anilox spare applicating rollers included

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Spiral mixer KEMPER, type: ECO 75 - for approx. 120 kg dough, 75 kg flour - Machine in used condition - is still being cleaned and technically checked - Overhaul possible: all parts are renewed, new paintwork, new bearings, new belts, new time clocks, etc. Visits and test runs are possible by arrangement.

Electrolux Smart Variomix 200L Boiling pan 2017, Stainless, 200L cooking kettle, electrically heated, 39.7Kw, max temp 127'c, with spare mixing arm and spare parts, 3Ph

Electrolux Smart Variomix 300L Boiling pan 2021, Stainless, 300L cooking kettle, electrically heated, 52Kw, max temp 127'c, with spare mixing arm and box of spare parts, 3Ph

Intensive batch mixer with a usable filling per batch of 500 l. / 800 kg (max.), emptying via central bottom flap (hydraulically operated), tools: star whirler, mixing star with two blades and wall-to-bottom scraper. Agitator drive: 45.0 kW via V-belt (speed can be controlled via FU), drum and mixing star drive: 13.5 kW, hydraulic unit: 2.2 kW for lock actuation. Includes modern control cabinet with programmable control. Mixer completely overhauled in 2016. Available for an extra charge: Comfortable mixer platform / steel substructure incl. drawings and statics.

Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available

sheet width: 3050 mm plate thickness: 10 mm control: Elgo 87 P2 : 11 - 31 Hub/min cutting angle adjustment: 1 - 4 ° Number of hold downs: 16 Stück : 900 kg : 11 kW table width: 700 mm table height: 800 mm range L-W-H: 4000 x 2220 x 1830 mm weight: 6300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.