e p used for sale

Used Used Capper Arol 5T Euro Va: Year: 2005 Condition: Good Used Capper Arol 5T Euro Va: Year: 2005 Speed: 8.000 bph Direction: clockwise 5 heads Type of cap: Screw cap Caps Orientator Caps elevator NERI Safety protections Code: X 426 More details: https://bottlingscout.com

Used Used Capper Arol Euro Va 3T 5.000 bph: Year: 2001 Condition: Good Used Capper Arol Euro Va 3T 5.000 bph: Model: EURO VA 3 KOPFE Year: 2001 Hourly output: 5.000 bph 3 heads Rotation direction: clockwise Cap: MCA 28 Cap distribution system: pick-on-the-fly GENERAL INFORMATION Safety protections Layout Code: X 460 More details: https://bottlingscout.com

Used Used Capper Enolmeccanica 4T Stelvin 2013: Year: 2013 Condition: Good Used Capper Enolmeccanica 4T Stelvin 2013: Model: 5 trio 47 Year: 2013 Speed: 6000 BPH Direction: Clockwise 4 heads for Stelvin cap (30?60) Electric head height adjustment Cap feeder included Black Safety protections Code: X 457 More details: https://bottlingscout.com

Stainless steel vacuum vessel with EKATO FLUID Mixer TYPE FGL-25D (mixer new 2005) vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C

Used Used Capper Arol Euro Va.Cuum: Year: 2007 Condition: Good Used Capper Arol Euro Va.Cuum: Year: 2007 Speed: 10.000 bph Direction: clockwise Number of heads: 6 Type of cap: screw cap Distribution system: caught on the fly Workable cap sizes: 28?15 with heads 30?60 without heads Workable bottle formats: 55.3mm/54mm/55.5mm Safety protections: yes Code: X 340 More details: https://bottlingscout.com

The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Siemens Sinumerick 840D Total hours: 12,058 h Operating hours: 5,039 h Worktable length: 1200 mm Worktable width: 5 Spindle rotation: 8000 1/min Number of axes: 3 X-axis travel: 1035 mm Y-axis travel: 560 mm Z-axis travel: 510 mm

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

Inc. software, PC and monitor! • Up to 305 mm/s at 1600x800 dpi • Up to 152 mm/s at 1600x1600 dpi • Max. print width 1067 mm • Max. print length 15 m • Prints on thick media up to 16 mm Specifications per manufacturer!

This DMG DMU 40 evo Vertical Machining centre was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. It doesnt have internal cooling but has 30 tools in magazine.

Horizontal turning machine manufactured in 2014. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available.

Cylindrical grinding machine manufactured in 2022. This ELMAG CG 800 features a maximum grinding diameter of 200 mm and a grinding length of 800 mm. It is equipped with a robust headstock spindle and transverse feed guide, ensuring precision in grinding operations. If you are looking to get high-quality grinding capabilities, consider the ELMAG CG 800 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

TECHNICAL SPECIFICATIONS Manufacturer: ELBA Description: Radial Scraper Machine Type: Stationary Type: RSA 70D Year of Make: 1996 Boom length: 20 m Connected load: 65 kW Operating voltage 380V Weight: approx. 5,000 kg

MINIMAX thickness planer model S41 ELITE S: - working width 410mm - useful working thickness from 3 to 240mm - motorized lifting with digital display - 4-knife shaft - Motor power 4 kW / 5.5 HP, 380 volts - 2 feed speeds 6 – 12 mt/min Year 2013, CE regulations

Folding machine Eurofold 235 S Art. L1152 The folding machine has been serviced and is in excellent technical condition.

Key data: 1020 mm

used, small table bending machine incl. frame, clamping is done via crank, bending beam 10mm, machine in its existing state, without function control, i.e. the machine is not overtaken by us Working length: 1020 mm Sheet thickness steel: 0.7 mm Color/: Green Dimensions: 1400 x 500 x 1200 mm Machine weight: 150 kg Opening width: 85 mm Bending Angle (Max): 105 degrees

WITH N&P UNIT (numbering & perforating) Counter: 34,552,033 Format (cm): 36x52 Dampening: conventional dampening Equipment / Additional information: with N&P (numbering & perforating) unit

ICS Chiller - Second Hand Year of Manufacture: 2016 Type - iC 535 Weight: 722kg Refridgerant: R410A Electrical Supply - 400V/3PH/50Hz Cooling Capacity: 41KW For more information and more available stock please visit us at - advancedbrewing.co.uk

EXERON DIGMA HSC 600 milling center was built in 2010 in Germany by Exeron GmbH. It is an extremely versatile yet compact machine designed for the production of precision tools and moulds. A number of state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The EXERON DIGMA HSC 600 is distinguished by its extremely rigid gantry structure, made of polymer concrete. The entire workspace has been fully maximised to ensure maximum freedom of operation. It features all the necessary equipment, i.e. a reliable electro-spindle, a 30-position tool magazine and a large work table with a length of 900 mm and a width of 550 mm. The machining process is performed fully automatically in HSM (High Speed Cutting) technology. This technology allows a significant reduction in cycle ti ...

Flat conveyor belt on aluminium substructure Length of the strap 515 cm, width of the strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels

Flat conveyor belt on aluminium substructure Length of the carrying strap 410 cm, width of the carrying strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels

Flat conveyor belt on aluminium substructure Length of the carrying strap 415 cm, width of the carrying strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels

Flat conveyor belt on aluminium substructure Length of the carrying strap 410 cm, width of the carrying strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels

Our state-of-the-art Automatic Tube Filling Machine is a versatile all-rounder and has been developed to optimally support companies with the highest quality standards. Thanks to its high-quality workmanship and wide range of applications, it offers intuitive operation that optimizes your tube filling processes efficiently and reliably. The powerful drives and the user-friendly color touchscreen control system allow maximum flexibility for format and product changeovers and greatly simplify your tube filling. The machine has memory locations for quick and reproducible setting of all relevant machine parameters. If you would like to optimize your tube filling processes through a strong production output with high quality at the same time, we at Impuls Packaging are your ideal partner. Overview of the overall system Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 ...

Presse à injecter DEMAG ERGOTECH 110 T Type : 110/470-430 Année: 2003 Force de fermeture : 110 T / 1100 KN Diamètre vis : 40 mm Volume injectable : 231 cm3 Pression d’injection : 2200 bars Entre colonnes : 470 x 470 mm Dimensions des plateaux : 620 x 670 mm Épaisseur moule min: 200 mm Course d'ouverture: 600 mm Poids : 5600 kg Dimensions : 4,70 x 2,00 x 1,50 m

General SKU219Y069 MakeEuromilling Serial9995357 TypeAD 750 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter100 mm Width100 mm Specified Features - Hammer Mill MaterialMild steel, Stainless steel 1.4301 (304) Hammer Mills Hammer millcheck Grinding room sizeø 235 mm Moving hammers14x Hammer width20 mm With sieve cagecheck Housing dimensions ø 235 mm Inlet100 x 70 mm Motor1,1 kW (400 V, 2855 rpm) Speed2855 rpm Information LocationBarneveld With switchcheck Floor space0,80 x 0,60 m Total height1,20 m Weight40 kgHammer MillsEuromillingMills > Hammer MillsBrand > Euromilling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

General SKU112H488 MakeElanco (Kuii Denki Kogyo) Mounted on framecheck Main Features Inlet diameter60 mm Specified Features - Roll compactor MaterialStainless steel 1.4301 (304) Roll compactorcheck Roll diameter2x ø 60mm Motorcheck With variable speed drivecheck With dosing/compacting screwscheck With hoppercheck Hopper sizes160 x 120 x 100 mm Inlet160 x 120 mm Information LocationBarneveld With switchgearcheck Floorspace1,1 x 0,7 m Total height1,6 m Extra SpecificationsSieve length 85 mm Roll compactorsElancoCompactors > Roll compactorsBrand > Elanco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details.

Manufacturer: GEW Model: E2C Machine Type : UV Curing System Technical Specifications - Power output: 140 W/cm - Number of lamp housings: 9 - HMI control stations: 10 - Maximum lamp life: 2500 hours per lamp - Cooling: fully air-cooled, no water installation required - Condition: as new Find more here - / Contact us at -

We are offering for sale a cable recycling plant .The plant is composed of the following elements: Main Granulator - Manufacturer: IRS SRL - Model: Easy - Type: 180 - Installed power: 8.8 kW - Year of manufacture: 2021 - CE certified Pre-Shredder - Manufacturer: ISVE - Model: MS 2260 Matching Conveyor Belts Find more here - / Contact us at -

Manufacturer: Deckel Maho Model: DMU 50 eVo Linear Year of Manufacture: 2007 Machine Type : Milling Machine Installed power: 44 kVA Supply voltage: 400V / 50Hz Machine hours (power on): 24,610 h Spindle hours: 9,820 h Find more here - / Contact us at -

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

This Gorman-Rupp S-Line VPA3-70-L is a diesel-powered, dry self-priming centrifugal pump (vacuum pump assisted), with a maximum capacity of 70 m³/h and a delivery head up to 20 mWc. This 3-inch pump is suitable for clean and wastewater, with a maximum solids passage of approximately 29 mm., , Key Specifications, Chassis Dimensions: Fully enclosed, sound-dampened., Fuel Tank: 100 liters, suitable for HVO fuel up to 100%., Engine: Kohler diesel engine, , The pump performs optimally when pumping clean or contaminated water, with a robust steel frame for continuous use., , Throughput capacity: 70 m3/h, Max dirt passage: 29 mm, Motor brand: Kohler, Max. head: 20 MWK, Max dirt passage: 3000 rpm, Weight: 600 kg, , = More information =, , Year of manufacture: 2021, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 Inch, Technical condition: good, Visual appearance: good, Price ...

This Gorman-Rupp S-Line VPA3-70-L is a diesel-powered, dry self-priming centrifugal pump (vacuum pump assisted), with a maximum capacity of 70 m³/h and a delivery head up to 20 mWc. This 3-inch pump is suitable for clean and wastewater, with a maximum solids passage of approximately 29 mm., , Key Specifications, Chassis Dimensions: Fully enclosed, sound-dampened., Fuel Tank: 100 liters, suitable for HVO fuel up to 100%., Engine: Kohler diesel engine, , The pump performs optimally when pumping clean or contaminated water, with a robust steel frame for continuous use., , Throughput capacity: 70 m3/h, Max dirt passage: 29 mm, Motor brand: Kohler, Max. head: 20 MWK, Max dirt passage: 3000 rpm, Weight: 600 kg, , = More information =, , Year of manufacture: 2021, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 Inch, Technical condition: good, Visual appearance: good, Price ...

Ref. no.: 18588 Manufacturer: BATTENFELD Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg Further information: BATTENFELD EM 30/55 UNILOG B6 All-Electric Precision Injection Moulding Machine The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance. The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine mo ...

plate thickness: 4 mm blade length: 220 mm pressure: 0 t weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,6 x 1,7 x 1,6 m total power requirement: 2,5 kW Combined notching machine with a fixed 90° angle and an adjustable rectangular notching unit variable up to 200mm length x fixed 100mm width. There are 2 manually adjustable stops with a digital display. Axle length X900mm / Y300mm There is no stamp holder / punch / hold-down device for this. These parts can be purchased from Boschert. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3-4 mm pressure: 0 t Cutting length: 220 mm table height: 900 mm quantity of oil: 35 l Table dimensions: 950 x 790 mm total power requirement: 4 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,0 x 0,86 x 1,2 m Foot switch angle adjustment 30°-140° automatic cutting gap adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 16 mm cutting length: 4075 mm weight: 23 t output: 45 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: - mm working heigth: - mm : - serial number: 2044 total power requirement: - kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m Neu geliefert an Universität. 2018 übernommen. Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert. Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt. 2-Achsen-Digitalanzeige Fagor nachgerüstet. -Reitstock mit Feinverstellung -Inn ...

Number of sanding units: 6 st. sanding width: 45-165 mm Sanding height max.: 45-92 mm weight: 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer -------------------------------------------- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturers description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, c ...

rotary table diameter: 600 mm grinding height: 600 mm grinding head - power requirement: kW workpiece weight: 300 kg grinding wheel diameter: 600 mm power spindle motor: 15 kW grinding height: 600 mm Control: SIEMENS STC weight of the machine ca.: 19 t dimensions of the machine ca.: 4,7 x 3,6 x 2,5 m Equipment & Accessories ? Wet grinding unit with universal paper belt filter, discharge container and magnetic separator, tank capacity approx. 500 l ? Electrical cabinet with digital drives SIMODRIVE 611D ? Coolant Mist extractor ? Recooling unit for grinding spindle motor ? Fully closed machine enclosure ? Central lubrication ? Swivebale Control Panel with SIEMENS Simatic 10” Touch HMI mounted at front of the machine ? Electro-permanent magnetic plate Ø 600 mm with 4mm pitch, absolute accuracy due to lack of heat, incl. Adhesion control (30-100%), autom. magnet pole switching via push b ...

working width: 1500 mm workpiece width - max.: 0,5 - 50 mm dimensions: 3300 x 1500 x 1800 mm feed stepless: 0-4 m/min total power requirement: 20,4 kW weight of the machine ca.: 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a p ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...

Rated capacity: 4,1 kW current intensivity: 7,2 A temperature: max. 65,8 °C operating pressure: max. 42 bar temperature: (Water): max. 35 °C operating pressure: (Water): max. 6 bar Ambinent temperature: -5 / +43 °C weight of the machine ca.: 143 kg dimensions of the machine ca.: 1,3 x 0,6 x 0,8 m Chiller ICS COOL ENERGY - IC 220 - Refrigerant R410A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x1300x1800 mm Weight: 0 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mm pressure: 18 t blade length: 220 mm angle adjustable from - to: 90 Grad table surface area: 1100 x 950 mm chamfer lenght: 835 mm total power requirement: kW weight of the machine ca.: 1,1 t dimensions: 1,2 x 0,8 x 1,4 m Combination machine: edging and notching - foot switch - Emergency stop switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling capacity 55 kW Refrigerant R410A The device has: - Compressor x 2 - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 2 The device after maintenance, fully functional 3-month operation warranty in Poland

CNC vertical milling machine Type: FBE-4000 Producer: Eumach Year: 2013 Control: Fanuc Series 31i-MB X: 4000 mm Y: 1000 mm Z: 1500 mm Tool magazine: 24 positions Spindle cone: ISO 50 Work area: 1050 x 4100 mm Max table load: 9000 kg Power on spindle: 22/26 KW Spindle speed: 5000 rpm Manual rotating head, speed 3500 rpm Cooling through the center of the spindle Folding the tool tray outside the table area - next to the stand on the left Chip conveyor Work probe OMP-60 Tool probe TS-27 R Machine Weight: 22500 kg Machine in good condition, fully functional Find more here - / Contact us at -

turning diameter: 340 mm turning length: 950 mm control: OSP P300L turning diameter over bed: 580 mm turning dia. over face-slide: 470 mm Workingspindle:: power capacity - main spindel: 22/15 kW turning speed range - main spindle: 45 - 5000 U/min spindle diameter: 120 mm spindle bore: 80 mm max. bar capacity: 72 mm spindle head: JIS A2-6 spindle cone: 82 x 2° Torque: 350 Nm travel -z axis: 1010 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 30 m/min x - axis: travel -x axis: 260 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 25 m/min C-Axis: 0,001 ° Rapids C - Axes: 200 min -1 rapid traverse: 12 m/min y-axis: 120 mm total power requirement: 31,7 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,2 x 1,8 x 1,8 m â½ing and milling centre equipped with: - CNC control OSP P300L - NC tailstock - 12-position turret with driven tool station (BMT 60 ...