e p used for sale

Double edger Woodmizer EG250, as good as new, max. 80 operating hours, 15 KW, saw blades, infinitely variable feedPrice subject to change, errors, printing and typesetting errors excepted

Double edger EG100, built in 2022, very good condition, max. board thickness 50 mm, max. trimming width 300 mm, 7.5 kW, 2 knivesPrices subject to change, errors, printing and typesetting errors excepted

Professional Holzprofi Maker edge belt sander with pivoting grinding device up to 90°, height adjustable cast iron table, mitre gauge adjustable at both sides, graphit band rest, rubberized grinding cylinder, cast iron table for round grinding is included in the price. Technical Data: Engine power 2,2 kW Grinding cylinder support Ø 38, 50, 76 mm Voltage 400V Table length 900 mm Table width 300 mm Table height adjustable ca. 905 - 1027 mm Band length 2770 mm Belt speed 16m/sec Weight 225kg

OK-Corp Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF with integrated Carton Erector/ Bottom Flap folder & adhesive tape Bottom flap sealer, Carton top Flap Openner & PE Film Carton Liner from a Roll of Film Full Stainless Steel Construction, Automatically Erects Cartons, tapes the bottom, Lines the Cartons with film from a Roll., Carton Sizes: L x W x H, 250 mm x 200 mm x 150 mm (min), 600 mm x 475 mm x 600 mm (max) Speeds upto 15 Cartons per/ min Siemens S7 PLC Controls, Condition: as new, Immediately available EXW our Warehouse Enger, Germany, Length: 200 to 600 mm, Width: 200 to 500 mm, Carton size min.: 250 mm x 200 mm x 150 mm, Carton Size max.: 600 mm x 475 mm x 600 mm

travel -x axis: 180 mm travel -z axis: 370 mm Total weight, approx.: 65 kg dimensions of the machine ca.: 2,0 x 1,2 x 2,0 m Tool Presetter DMG Microset - ECO 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

Strip dewoven, de-fleece machine Maja ESB 4434 V, to, derinding and skinning, with ribbon and open use, 2 speeds adjustable, new bearings and sealing rings rollers, partly new bearing gears, with operating instructions, year of construction 2006, Connection 400V, dimensions LxWxH approx. 85x100x133cm, weight approx. 280kg, good used condition, fully functional

Belt loader, coolant filter, wheel changing equipment, grinding and drag rules and grub screws, Grinding wheel dimensions (od x id x width): 610 x 355 x 304,8 mm, Ø min / max to grind: 2/150 mm, Regulating wheel speed nº: infinite, Min/max speed of regulating wheel (r.p.m.): 10/225 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi TD, Dive (auto/manual): Automatic , Dimensions of the regulating wheel (OD x ID x W): Ø350 x Ø203,2 x 355 mm, Infeed (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 177.5 mm, Maximum infeed grinding length: 355 mm, Motor power cooling: 0,70 Kw, Coolant system motor power: 0,70 Kw, Grinding wheel head motor power: 37 Kw, Total power: 45 Kw, Voltage: 220/380Kw, Long: 1.165 mm, Width: 3.398 mm, High: 1.700 mm, W ...

basket dimensions: 0 control: 0 total power requirement: 0 kW weight of the machine ca.: 0 t dimensions of the machine ca.: m heating capacity: kW ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power (W) 8 ...

Vakona ESK 850 STL-B incl. loading, top condition

pressure: 225 t chamfer lenght: 2050 mm distance between columns: 1550 mm control: CYBELEC DNC 1200 PS Eco stroke: 550 mm table height: 700 mm throat: 405 mm distance between table / ram: 320-870 mm column arm: 405 mm weight of the machine ca.: 14.000 kg Accessories / equipment: - controlled axes: Y1 - Y2 - X - R - Z1 and Z2 can be moved manually - Lasersafe angle measurement - Pneumatically adjustable support table - pneumatic upper and lower tool clamping - 2-hand foot control - manual crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible.

Height=1.77 m, Overall length= 1.58 m, Overall width= 0.89 m, Net weight= 343 kg,

sheet width: 3050 mm plate thickness: 6 mm weight: 7.000 kg range L-W-H: 3450x2200x1750 mm Equipment/accessories: - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis EMCO Maxxturn 65 lathe was manufactured in 2005. It features a Siemens 840 D control system, a 12-position turret with all driven tools, and a tool holder VDI 30. The main spindle operates up to 5000 rpm, while the counter spindle reaches 7000 rpm. It includes a Hainbuch collet chuck, parts catcher, and a chip conveyor. A great opportunity to buy this EMCO Maxxturn 65 lathe. Reach out for more information.

This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for sale.Contact us for more information.

This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, its ideal for precision and efficiency in small part production. Contact us for more information about this machine.

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit.

This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information.

This HARDINGE EMAG VL 5 was manufactured in 2001. It features a Fanuc Series 21i-T control, a chuck diameter of 260 mm, and a maximum turning diameter of 220 mm. The spindle can reach speeds up to 4,500 rpm, and it includes a 12-piece automatic tool changer. Ideal for precise vertical turning operations. Contact us for more information.

This EUMACH SUMO 1400 Vertical Machining center was manufactured in the year 2004. It is equipped with a HEIDENHAIN 426 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm, is good condition and well maintained.

This 3-axis Eumach LBM-1500 vertical machining center was manufactured in 2016. Consider the opportunity to buy this Eumach LBM-1500 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information.

This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine.

This MELCHIORRE ELC 800 7S was manufactured in 2000. It is a surface grinding machine featuring a maximum wheel diameter of 800mm. Consider the opportunity to buy this MELCHIORRE ELC 800 7S surface grinding machine. Contact us for more information.

This Dugard Eagle 200 was manufactured in 2005. A robust horizontal turning machine featuring a maximum turning diameter of 280 mm and length of 508 mm. It includes a main spindle bore of ø62 mm and a bar capacity of ø52 mm. The spindle operates at speeds up to 4500 rpm, supported by a FANUC motor. Ideal for precise turning operations. Contact us for more information about this machine.

This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine.

This ECOCA SJ-20 was manufactured in 2004. A robust horizontal turning machine featuring a swing over bed of approximately 520 mm and a max turning length of 500 mm. It includes a spindle speed of up to 4,000 rpm and a powerful 7.5 kW spindle motor. Ideal for precision turning, it also offers an 8 or 12-station turret. Footprint approximately 2.5 m x 1.6 m. Contact us for more information about this machine.

This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine.

This ERGOMAT TNG 32 was manufactured in 2022. It features a spindle with a bar capacity of Ø 32 mm and a maximum speed of 5000 rpm. The horizontal turning machine includes a Fanuc Oi-TF control and an LNS bar loader with a 3m capacity. Consider the opportunity to buy this ERGOMAT TNG 32 horizontal turning machine. Contact us for more information.

This Euromac BX 1000/50 was manufactured in 2007. A robust and reliable choice for sheet metal operations, it ensures consistent performance. Consider the opportunity to buy this Euromac BX 1000/50 sheet metal machine. Contact us for more information.

This ELMAG UFM 125GT was manufactured in 2015. It features a universal milling machine with a spindle Morse taper ISO 40, and a table surface of 1,320 x 320 mm. The machine offers a vertical speed range of 45-1,660 f/p and a horizontal speed range of 40-1,300 f/p. Ideal for precise and versatile milling tasks. Contact us for more information about this machine.

This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine.

This 3-axis DECKEL MAHO DMU 50 evo was manufactured in 2001. It features an 18000 rpm spindle and a machine table measuring 800x480 mm. With travels of X: 500 mm, Y: 420 mm, and Z: 380 mm, this vertical machining center represents a robust opportunity for precision machining. Reach out for further details regarding this vertical machining center.

This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.

This Enshu ES450 was manufactured in 2004. It features a spindle speed of up to 12,000 min⁻¹, a tool storage capacity of 20, and a rapid traverse feed rate of 60,000 mm/min. The machine accommodates a maximum workpiece weight of 800 kg and offers a cutting feed rate of up to 15,000 mm/min. Consider the opportunity to buy this Enshu ES450 vertical machining centre. Contact us for more information.

This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine.

This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre.

This 5-axis ESPE LAVA CNC 500 was manufactured in 2008, designed for advanced dental technology. It features a standard disc diameter of 98mm, operates within a temperature range of 18 – 25°C, and maintains a sound level of 65 dB (A). Ideal for businesses aiming to enhance automation and productivity in milling operations. Contact us for more information about this machine.

This 3-axis Enshu WE30Ve was manufactured in 2016. A vertical machining centre designed for precision and efficiency, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Enshu WE30Ve machine we have for sale. Contact us for more information about this machine.

This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information.

This 3-axis NCT EmR-610M vertical machining center was manufactured in 2017. It features a 600mm X-axis, 400mm Y-axis, and 450mm Z-axis, with a high-speed capability of 30000 RPM and a HSK-E40 clamp. It also includes 21 tool slots. If you are looking to get high-quality milling capabilities, consider the NCT EmR-610M machine we have for sale. Contact us for more information.

This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information.

This 5-axis ESPE LAVA CNC 500 was manufactured in 2010, featuring a robust universal machining center design. It operates on a supply voltage of 200-240 V AC and supports a nominal output of 0.92-1.1 KW. The machine dimensions are 1090 mm in width, 1960 mm in height, and 840 mm in depth, weighing approximately 620 kg. If you are looking to get high-quality milling capabilities, consider the ESPE LAVA CNC 500 machine we have for sale. Contact us for more information.

This 3-axis DMG MORI DMC 635 V eco was manufactured in 2010. A vertical machining centre featuring a Heidenhain TNC 620 control, a 20-position SK40 tool magazine, and an internal cooling system at 12 bar. Ideal for precision machining with its direct measuring system for X, Y, Z axes. A great opportunity to buy this DMG MORI DMC 635 V eco vertical machining centre. Contact us for further details regarding this vertical machining centre.

This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information.

This TSCHUDIN ecoLine 400 centerless grinding machine was manufactured in 2013. It features a Fanuc 21i-MB control system, a grinding wheel with a max outer diameter of 400 mm, and a regulating wheel with a speed range of 0-265 rpm. Additional attachments include a Kraft & Bauer fire extinguishing system and a Knoll microfilter. Consider the opportunity to buy this TSCHUDIN ecoLine 400 centerless grinding machine. Contact us for more information about this machine.

This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.