130,458 used machines on RESALE, but how to find them? Machine Search
JEL Fix double screen machine (2 pcs) installed in solid table, without screen inserts
Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: Approximately 35 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm
Manufacturer: ENGEL Model: EM 440/150 Year of Manufacture: 2007 Specifications: - Clamping Force: 150 tons - Screw Diameter: 35 mm - Operating Hours: 58,724 Find more here - / Contact us at -
Manufacturer: Engel Model: Victory 1800/ 260 Year of Manufacture: 2008 Specifications: - Clamping Force: 260 tons - Screw Diameter: 60 mm - Operating Hours: 88,266 Find more here - / Contact us at -
Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good
x-travel: 3000 mm y-travel: 2500 mm z-travel: 1150 mm Control: 840 D Powerline tool taper: HSK-A63 table-size: 3000 x 2500 mm turning speeds: 16000 U/min total power requirement: 60 kW weight of the machine ca.: 50 t dimensions of the machine ca.: m - 5-Axis-Fräsmachine - max. rpm: 16.000 - X-Way: 3000 mm - Y-Weg: 2500 mm - Z-Way: 1150 mm - A-Axis: +/- : 100 mm - C-Axis: +/- : 181,5 mm - Tabelsize: 3000 mm x 2500 mm - option: Blowing air outside - kinematics: Clevis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2000 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 600 mm grinding width: 400 mm workpiece height: 450/510 mm grinding spindle - swivable: 10 ° grinding spindle slide: 450 mm horizontal movement: 320 mm swivability (for helical bores): 1 ° surface area: 900 x 300 mm stroke: 50 mm clamping slots: 1 cross travel: 320 mm longitudinal feed: 600 mm table load: max 320 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 6 mm total power requirement: 3 kW weight of the machine ca.: 1,05 t work table:: 1000 x 800 mm Knife length: 205 mm dimensions of the machine ca.: m pressure: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 0,5...5 mm sheet width: mm punching force: 20 t travel -x axis: 1250 mm travel -y axis: 750 mm number of strokes: 20 per min ram stroke max. - stepless: 40 mm total power requirement: 14 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m pressure: t - max. thickness: 0,5 … 5 mm - travel in X : 1250 mm enlargeable to 2000 mm - travel in Y axis: 750 mm enlargeable to 1000 mm - number of strokes: 20 per min - stroke: 40 mm - Stanz- Ø 100 mm 1,5 mm -( punch diam. and thickn.) Ø 50 mm 3,5 mm Ø 16 mm 12,0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 6000 U/min x-axis: 550 mm z-axis: 200 mm rapid traverse: 30/20 m/min feed: 11 m/min control: Siemens 840 C total power requirement: 35 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m - speeds: [1/min.] : 6.000 - torque [Nm]: 480 - swing diam.: 290 mm - power: [kW] 34 - chuck diam. 200 mm - turret: 12-fach, VDI 40, Sauter - driven tools 7,8 KW, - x -travel: 550 mm - z- travel: 200 mm - rapid travel: (X/Z) [m/min] 30 / 20 - feeds: (X/Z) [m/min.] 11 KN - connected load: [KW] 36 kW - machineweight: [kg] 6.500 - chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm - Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain - parts conveyor for feeding parts into the machine - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit replaced The data for this ad was created with ModulMW ...
grinding length: 600 mm grinding width: 320 mm workpiece height: 525 mm surface area: 600 x 300 mm magnetic plate: 600 x 300 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2600 x 1500 x 2000 m total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 10-300 mm grinding length: 650 mm centre height: 175 mm Control: total power requirement: 12 kW weight of the machine ca.: 3,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic evisceration line of 3000 birds/hour 8'' line. - Vent cutter machine 12 / 8" - Opening machine 12/8" - Eviscerator 12/8" - Cropper machine - Neck cutter and puller machine - Final inspection machine - Bird unloader machine - Feet cutter and Transfer System , including spare part
Refrigerant: R410a, refrigerant capacity: 10kg, oil type: RL32 3-MAF, oil capacity: 6.8l, max. low/high pressure: 29.5bar/45bar, cooling capacity: 76.9kW, weight: approx. 520kg. Documentation available. On-site inspection is possible.
used
Dough machine stainless steel version Eberhardt Model: S 160 Kneading machine mobile with brake 2 LED timers Spiral mixer with 2 gears LED temperature indicator for max. 160 kg dough depending on the TA Flour dust hood only DGUV V3 tested by us Connection: 400 V, 8.55 kW, 20.5 A, 32A-CEE plug Used machine overhauled 3 months warranty + spare parts service Option: Service Package Maintenance contract Instruction & Commissioning Visit our large spiral mixer exhibition!
Spiral mixer / dough machine Model: SP 75 ECO sophisticated technology ... already proven many times over! Manual control 2 gears, 2 clocks/ timers Kneading machine for doughs from 6 to 120 kg / 4-75 kg flour Flour dust hood Stainless steel boiler and spiral Boiler capacity 175 litres mobile, with brakes only with us with DGUV V3 tested Dimensions: 800 x 1190 x 1280/1700 mm, WxDxH Connection 400V, 8.25 kW, 30Amp. 32A-CEE Plug Used machine overhauled with 3 months warranty + spare parts service Option: Delivery Maintenance contract Service Package E-Box Instruction & Commissioning We have a TOP selection of spiral mixers in stock!
dimension of workpiece: - mm voltage: - V accessories and equipment:: ASUS All-in-One PC total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m http://www.ibendorf.de/ecmc.html The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SPECIFICATIONS: Power supply: Lithium battery Water tank: 30 l Width of the washing lane: 450 mm Speed: max. 3.5 km/h Dimensions: 96 x 55 x 122 cm Weight: 98 kg
Used EMPAK EA-1 labeling machine for automatic application of self-adhesive labels to all types of cylindrical packaging. Technical data: Max. label dimensions length limited by package size width up to 120mm Label reel dimensions Internal diameter 40mm Outer diameter up to 300mm Max. efficiency. Up to 6000 packages/hour Package diameter up to 80mm Power supply voltage 3N~50Hz 220/380V TN-S Overall dimensions 1500x700x900 mm weight 130kg.
An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.
Ergomat TNG 32 + LNS Sprint 552 - Turning Center + Bar Feeder - FANUC 0i-TF CNC control - 60° inclined bed - Cross slides with linear guides - Parts separators - Coolant device -Conveyor - Switch-on time: 645 hours - Processing time: 390 hours - Year of construction 2022 LNS Sprint 552 - Bar Feeder - Rod Ø: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar passage Ø: 32 mm - Spindle speed max.: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Workspace: - Workpiece Ø/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank Ø: 20 mm - Tool holder 4-point: 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Po ...
used rack oven Miwe Roll-in RI 1.0608-TL electric, overhauled, with hood, with touch display, electrical, electrics rewired, new seals, circulator restored, 72.6 kW, 400 V, 50 Hz, Ser.-Nr. 47 707 Pictures during the overhaul. For newer pictures, please ask.
Eichinger 2041.10 waste box van; Volume 750L; Load capacity 300kg; tilting; on wheels. Waste box wagon Eichinger 2041.10; capacity 750L; lifting capacity 300kg; tiltable; with rolls.
DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...
Presse à injecter DEMAG ERGOTECH 330 T en bon état? Référence : Ergotech E330-1450-NC4S? Année: 1998? 65 000 heures de fonctionnement ? Diamètre vis : 70 mm? Rapport L/D : 20? Volume injectable : 1039 cm3? Poids injectable en PS : 940 gr? Pression d'injection : 1400 bars? Course de dosage maxi : 270 mm?P uissance de chauffe : 27 KW? Dimensions des plateaux : 1040 x 950 mm? Distance entre colonnes : 710 x 630 mm? Epaisseur moule : 330 - 710 mm? Course d'ouverture maxi : 675 mm + Robot SEPRO type 3031 YN MPA II? axe X : 2500 mm? axe Y : 800 mm? axe Z : 1400 mm Dimensions de la machine : 6,50 x 2,00 x 2,30 m? Poids de la machine : 14 300 kg
Key data: 110 V, 400
MAN E0836 LE302 Biogas Containerised Generating set. Scope of supply: Container, engine, alternator (Leroy Somer), control panel (ComAp), radiator, heat exchanger, exhaust gas heat exchanger, gas line, carbon filter. Engine is from 2019 in a container 2009. It has been carefully maintained and stopped running in October 2023. Service History December 2021: New pistons and cylinder heads June 2023: New turbo Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.
Manufacturer: Lisec Technical Specifications ( Model: ATH -60/30 D) - Year of Manufacture: 1995 - Operating Voltage: 380 V, 3-phase, 50 Hz - Power Consumption: 5.9 kW - Machine Weight: 6,000 kg - Compressed Air Pressure: 6 bar - Maximum Load Capacity: 500 kg Machine Length: 6,600 mm Total Installation Length: - With 4 glass racks: 25,500 mm - With 3 glass racks: 19,300 mm - With 2 glass racks: 13,100 mm - With 1 glass rack: 6,900 mm Depth: 3,200 mm Height: 3,600 mm Load Capacity: 600 kg Transport Speed: 40 m/min Glass Size (Max): 3,250 × 6,000 mm Glass Size (Min): 1,600 × 2,800 mm Glass Thickness: 3–12 mm Electrical Connection: 220/380 V, 50 Hz Installed Power: 6 kW Compressed Air Connection: NW 9, 6 bar Technical Specifications ( Model: ESL-60/30RS) - Year of Manufacture: 1998 - Operating Voltage: 400 V, 3-phase, PE, 50 Hz - Power Connection: 13.5 kW - Machine Weigh ...
Manufacturer: Cefla Model: GlassCoater F13 EVO Year of Manufacture: 2011 Electrical Specifications: - Voltage: 400 V - Frequency: 50 Hz - Total Installed Power: 2.1 kW CE Certified: Yes Find more here - / Contact us at -
An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.
Food Machinery Co E4230 VFFS bagger 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph
Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible.
1 used ELB SURFACE GRINDER Model: SWBE 010 NPC-K Grinding area: 1000 X 550 X 400 mm Year of Make: 1988 Grinding wheel: 400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Electro-Permian Magnetic Clamping Plate 1000 X 400 mm (SAV) Magnetic adhesive force control Universal Paper Belt Filter Grinding wheel with holder
Inv. Num. : 7215 Type: ENSIS 3015 AJ Producer: AMADA Created: 2021 Parameters: Laser ON: 9348 h Beam ON: 7276 h Laser power: 6 kW Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg
Rack Oven Miwe Rollin RI 1.0608-TL Electric A used rack oven Miwe Rollin electric 60x80 built in 2008 with 2 rack trolleys is currently for sale and immediately available in stock. Rack oven Miwe Rollin RI 1.0608-TL 60x80 Electric - Electric rack oven Rotary oven - Miwe Rollin 60/80 - for 58x78cm trays - Optionally with rack trolley - With drive-on ramp - With Miwe control - Nominal consumption : 72.6 kW - Year of construction 2008 More information and pictures on request
A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.
pressure: 125 t no. of strokes: 55 Hub/min stroke: 20 - 160 mm table-size: 970 x 660 mm max. ram stroke: 160 mm min. ram stroke: 20 mm throat: 340 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: 1,5 x 3,0 x m With motor, gear reduction, wheel protection, air friction clutch, additional brake (Make Desch) and safe control according to UVV, Mech. Overload protection in the ram Two-hand operation, control cabinet The price is ex stock as the press is, is, or is. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t distance between columns: 495 mm stroke: 150 mm distance table/ram, max. stroke up, adjustment up: 300 mm table surface area: 490 x 400 mm hole in the table: 50 mm table height over floor: 950 mm column travel -side: 155 mm ram surface: 150 mm feed down: 480 mm/sec feed up: 480 mm/sec working feed: 20 mm/sec oil volume: 115 l power capacity: 7,5 kW weight: 2,2 t dimensions of the machine ca.: 1,35 x 1,00 x 2,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 400 mm swing diameter: 420 mm x-travel: 850 mm z-travel: 315 mm spindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mm turning speeds: max. 4000 U/min tool turret 12 times: C5 Capto rapid traverse x + z axis: 45 / 30 m/min feeding force: 11 kN total power requirement: 58 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 320 mm turning height: 180 mm Control: SIEMENS 840 D chucking diameter: 315 mm 0: 4.000 U/min : 1.000 / 280 mm rapid power traverse in X-and Z direction: 60/30 m/min tool turret with 12 work positions: VDI 50 total power requirement: 65 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: 5,5 x 3,2 x 3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t ram surface: 3600 x 2500 mm stroke: 350 mm Control: Siemens S 7 no. of strokes: 11 - 44 Hub/min table surface area: 3600 x 2500 mm ram adjustment: 400 mm material width: 500 - 1950 mm material thickness: 0,6 - 2,5 mm mm coil weight: 35 t coil external diameter: 900 - 1900 mm coil internal diameter: 610 mm no. of straightening rolls: 13 straightening roll diameter: 50 mm Stack height: 400 mm stations: 2 total power requirement: kW weight of the machine ca.: 390 t dimensions of the machine ca.: m with reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 750 mm table width: 550 mm ampere: 60 A Control: Makino MGE20 x-travel: 600 mm y-travel: 400 mm z-travel: 250 mm workpiece weight: 450 kg tool change unit: 8 total power requirement: kW weight of the machine ca.: 5,00 t dimensions of the machine ca.: 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Combi Steamer Rational SCC101G for 10×1/1 GN, Natural Gas, can be set to LPG, 230 V, 39 kW, 1.7 A, core temperature, steam, fan speed programmable, 1/2 energy, cool down, self-cleaning, and much more, incl. manual, dimensions 85x77x102 cm, suitable substructure 2367
The MAFAC ELBA is a powerful spray cleaning system for the aqueous cleaning and drying of a wide variety of components. It is ideal for the thorough and gentle cleaning of format parts, filling valves, stainless steel containers, trays, sheets, knives, pipes, and fittings – even with complex geometries., The heart of the machine is the patented rotating spray and basket system, which ensures uniform wetting of all component surfaces. The workpieces are introduced into the system either as bulk material or as set material in standard baskets (600 × 400 × 288 mm)., Cleaning takes place in two separate baths:, - Bathroom 1: intensive cleaning to remove product residues, grease and impurities, - Bathroom 2: Rinsing to minimize residues and surface finishing, -, Integrated Fine filtration and a Coalescing oil separator ensure the long-lasting quality of the cleaning media and reduce chemi ...
x-travel: 1020 mm y-travel: 520 mm z-travel: 550 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 828D 24-fold automatic tool changer chip conveyor coolant through spindle device measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 520 mm Verfahrweg Z / Z-Travel 550 mm Tischgröße / table size 1100x500 mm Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 24 fach Antriebsleistung Spindel / drive capacity spindle 9/22 kW Gewicht der Maschine ca. / weight 5500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
maximum number of results exceeded
please refine your search
