e p used for sale

weight max. in kg: 1200 kg fork length: 1150 mm stroke height: min 85, max 190 mm : 160 mm length in width: 550 mm number of wheels: 4 vorne, 2hinten tire equipment: 80 x 70mm PU tandem fork arm (length x width x thickness): 1150 x 160 x 45 mm turning radius: 1452 mm battery: 48V / 20Ah weight of the machine ca.: 0,140 t dimensions: 1,65 x 0,55 x 1,2 m SPECIAL PRICE! - Battery charging time only 3 hours - Electrically lift and move - Use up to 6 hours - Easy to maneuver due to its low weight - Powerful lithium battery Driving speed - 4.5 km/h without load - with load 4.0 km/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 485 kg dimensions of the machine ca.: 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can b ...

cutting diameter: 280 mm capacity 90 degrees: flat: 380 x 260 mm capacity 90 degrees: square: 260 x 260 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3440 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,41 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with ...

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 25,4 x 0,9 mm weight of the machine ca.: 0,4 t Dimensions (LxWxH): 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 5 - 160 A connected load frequency: 230 V weight: 7,9 kg Dimensions (LxWxH): 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage,  ...

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 150 kg Dimensions (LxWxH): 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,285 t dimensions: 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Erka dough machine Model: HK 30 for approx: max. 30 kg dough 2 courses Machine mobile with locking foot Connection 400V, 16A-CEE plug Machine You can find many more bakery machines with us.

Control Fanuc 21T Turning diameter 158 mm Circumferential diameter over bed 340 mm Speed 6,000 min-1 8-speed revolver Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Versatile tool holders

was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II,, for raw meat,, designed to be mobile,, effective width: 400 mm,, feeding distance: 820 mm,, gradient: approx. 60° - length: approx. 3,800 mm,, Delivery height: approx. 2,500 mm,, Delivery distance: approx. 930 mm,, Lug width: 400mm, Stud height: 50mm, Cleat pitch: approx. 200mm, Hygienic version with central scaffold tube. The construction is very open. The belt is removed using round material. Drive and deflection stations are designed with sheet metal parts. In the lower run the, Belt worn by rollers. The conveyor is equipped with a quick clamping system. Thus, the belt can be lifted for cleaning or removed from the side. The belt is positively driven and, also forced, Support:, with rectangular tube support frame with castors, Product Tours:, Plastic profiles swiveling on both sides, Clear width = stud w ...

BATTERING-GLUING AND BREADING MACHINE, STEIN, MESH WIDHT 200MM Technical features: Battering-gluer: Material: Stainless steel Power supply: 380V-440 / 50-60Hz Battering-gluer dimensions: 1200 x 700 x 2000 mm Breader, Stein, model: E8J Serial number: 184 Bandwidht: 200 mm Dimensions: 2400 x 750 x 2000 mm

DEFROSTER-MIXER FOR VEGETABLES WITH ROTARY DRUM, MECALSA, TYPE: MC ESC TRL Technical description: Heating: Direct steam Voltage: 380/440V Frequency: 50/60 Hz

An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspe ...

Tunnel dimensions X/Y: 420mm/240mm, welding frame dimensions X/Y: 500mm/400mm, max. roll width: 600mm, max. product height: 150mm, tunnel length: 700mm, machine dimensions X/Y/Z: approx. 2400mm/900mm/1550mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.

A universal Illig double-stroke thermoforming machine is available. Form dimensions X/Y: 960mm/560mm, max. drawing depth: 280mm, max. panel dimensions X/Y: 960mm/560mm, motor power: 1.5kW, heating power: 16.3kW, heating zones: top and bottom. On-site inspection is possible.

An ETT depalletizing machine is available. The machine is suitable for 0.1l small spirit bottles. Packaging capacity: 10000 bottles/h, pallet formats: 1000mm/1200mm, connected load: 3.5kW, compressed air: 6bar, air requirement: 14l/carton, machine dimensions X/Y/Z: approx. 1800mm/3000mm/2400mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.

A drying oven Ernst Reinhardt GmbH, which was used in the twisting and tea bag industry for drying yarn bobbins, is available. Internal dimensions X/Y/Z: 1250mm/800mm/1500mm, volume: 1.5m³, heating capacity: 24kW, machine dimensions X/Y/Z: approx. 2200mm/1100mm/2500mm. On-site inspection is possible.

Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible.

Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible.

Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible.

An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible.

Speed: 3000/min, volume flow: 3.7m³/min, overpressure: 8bar, operating pressure: 4-13.5bar, oil capacity: 10l, connected load: 22kVA, length: 1500mm, width: 850mm, height: 1200mm, weight: 672kg. Including test certificates for the pressure vessels, speed-controlled with heat exchanger for heat recovery.

Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of construction: 1980, operating pressure: 7bar, test pressure: 9.1bar, operating temperature: 20°C, medium: compressed air, capacity: 5300l. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15000l, operating pressure: 4ATÜ, test pressure: 5.2ATÜ. On-site inspection is possible.

Air volume flow: 4500m³/h, max. negative pressure: 3400Pa, motor power: 4kW, filter area: 42m², number of filters: 3, machine dimensions X/Y/Z: approx. 2050mm/1050mm/2050mm, weight: approx. 350kg. Documentation available. On-site inspection is possible.

Several roller conveyors are available for washing baskets that were set up in a low-dust production area. Wash basket width: 500mm. Single pieces without drive. Including swivel table. The roller conveyors are ready for collection.

A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.

pressure: 25 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 t distance between columns: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various gas forklift trucks, electric forklift trucks and electric high-lift trucks from various manufacturers are available. 1) Heli gas forklift truck, load capacity: 2500kg. 2) Heli gas forklift truck, load capacity: 2500kg. 3) Jungheinrich electric forklift truck, load capacity: 2000kg. 4) Jungheinrich electric high-lift pallet truck, load capacity: 1600kg. 5) Electric high-lift pallet truck Linde, load capacity: 2000kg. On-site inspection is possible.

saw blade diameter: 275 - 315 mm cutting diameter: 80 - 102 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 1, 5 x 2 m No. 5230 Cold circular saw with additional gearbox for 4 speeds EISELE VMS II - S - PV ( Typ-Nr. 421 ) Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence) Weight approx. 400 kg Working range: Ø 80-102 /flat 160x75/82 Drive: 1,4/1,9 Feed - roller conveyor approx. 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: max. 2250 m³/h : 2550 pa power capacity: 2,2 kW Suction- Tube: 250 mm Number of working hours: 1450 h power requirement: 2,2 kW Packing: ca. 1200 x 900 x 1600 mm Shipping weight: 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 50 / 65 kW volt: 220 V ampere: 181/230 A weight of the machine ca.: ? t dimensions of the machine ca.: ? m (passend für Kutter MEISSNER RSM 200) n 1460/2940 min-1, iP 23 Temperature sensor for motor protection + tropically insulated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26 t punching cross-cut in cmm: 80 x 2,5 stroke: - mm total power requirement: 1,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,5 m No. 1096: Revolver hole punch 26 to. EDEL, type SMO 26/660/12 built 1973 with throat depth 660 mm Working area: diam. 80 x 2.5 mm Drive power: 1.5 kW Accessories: 12-station tool magazine Various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: SK 40 collet diameter: - turning speed range: Maschinenabhängig U/min drive motor: Antrieb durch Maschine kW distance spindle - column: ca. 800 mm total power requirement: - kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 0,8 m No. 4896: Vertical milling head SK 40 Make COLLET + ENGELHARD, mod. BN 100 ( BFfb 85 / 110 ) Support bearing 2 set of bevel gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 400 mm grinding width: 250 mm workpiece height: 300 mm total power requirement: ? kW weight of the machine ca.: 2 t dimensions of the machine ca.: 222 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1400 kg fork length: 1150 mm stroke height: 3600 mm total power requirement: 1,3 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 212,5 m No. 5339 1 used electric pedestrian stacker 1400 kg / 24 V EX / PYROBAN System 5000 E / EX 3G Zone 2 with charger SLT 100 / 70 A Battery defective The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1200 kg fork length: 1150 mm height of stroke: 4550 mm voltage: 24 V accessories and equipment:: Batterieladegerät The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: Ø 340 / 340290 mm band length: 600 52 2,5 mm cutting lenght max.: x 600 mm total power requirement: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,52,51,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 913 kg 280030.XD7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mm saw band length: 3375 mm cutting width: 350 mm dimensions of saw-band: 3375 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,8 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1200 kg fork length: 1150 mm stroke height: 3600 mm : 6,0 / 6,0 km/h : 600 mm : 2,2 kW : 620 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carrying capacity: 1400 kg dimensions: 1690 x 950 x 1700 mm While stocks last 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 bar liter capacity: 1400 m³ / min dimensions: 700 x 550 x 1100 mm total power requirement: 11 kW weight of the machine ca.: 275 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mm workpiece length: -- mm work piece width: 0 - 3 mm speeds: 3600 U/min range of angles: 30 - 60 (stufenlos) ° weight of the machine ca.: 31 kg dimensions of the machine ca.: 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.