e p used for sale

Servo drive SEW R77DLR90L4BE5HR/IS/TF/AS7W 140 rpm 329 V IP54 shaft diameter: Ø 40 mm without servo controller ! New !' Dimensions: 770 x 300 x 270 mm

Servo Motor with Gearbox and Brake, Permanent Magnet Motor SEW KAF47 CM71S/BR/TF/RH1M/SB64 ( KAF47CM71S / BR / TF / RH1M / SB64 ) < br /> 3000 rpm < br /> 400 V IP65 SEW i 39,61:1 hollow shaft diameter: Ø 35 mm wavelength: 150 mm Groove width: 10 mm flange diameter: Ø 130 / 200 mm bolt circle diameter: Ø 165 mm 4x Bore: Ø 11 mm used, tested ! Dimensions: 580 x 220 x 210 mm

Servo Motor with Gearbox and Brake, Permanent Magnet Motor SEW KAF47 CM71S/BR/TF/RH1M/SB64 ( KAF47CM71S / BR / TF / RH1M / SB64 ) 3000 rpm IP65 SEW i 39,61:1 hollow shaft: Ø 35 mm flange: Ø 200 mm used, tested ! Dimensions: 580 x 220 x 210 mm

Gear Motor with Inverter and Brake SEW S67 DT80N4/BMG/MM07/MFP ( S67DT80N4 / BMG / MM07 / MFP ) < br /> MOVIMOT MM07C-503-00 0,0,0,0 15 / 0.75 kW 5.1 / 26 rpm 380 - 500 V IP54 shaft diameter: Ø 35 mm with control (MOVIMOT) ! used, tested ! Dimensions: 560 x 250 x 260 mm

9482023 Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler features a durable, electronically controlled, water-cooled moving grate, designed to burn a wide range of fuels from wood pellets to wood chips and waste wood. Installed in 2012, the plant operated on wood pellets until December 2022. It is a complete system in good condition, housed in a concrete-element building, with two large pellet silos and a hot water accumulator tank for heat load balancing. These auxiliary components are optionally available to interested buyers. The boiler is equipped with load-controlled primary and secondary combustion air fans, as well as a speed-controlled exhaust gas fan, ensuring high combustion efficiency and low electrical power consumption. The two-stage combustion design minimizes NOx emissions. Its robust triple-layered ceramic and steel combustion ...

Code: 0379 Brand: BRENNA + ELEPHANT - ITALY Model: GR 200 - Norme CE Manually operated jib crane with cantilever beam - CE Standard Lifting capacity 200 kg Chemical-anchored base Complete with: Electric hoist RWM Mod. W 125 T1 V1 Type F - Capacity 125 kg - Speed 8 mt/min - Motor 0,6 Kw - Rpm 1400 Pneumatic suction lifter ELEPHANT Mod. VLA6F with 6 plates suitable for handling sheet metal and other materials - Capacity 500 kg - Plate dimensions diameter 265 mm - Transverse and longitudinal plate adjustment - Compressed air operation with powerful and quiet vacuum generator - Operating pressure 6-7 bar Height of support column 3400 mm Length of crane boom 4000 mm Overall dimensions for transport mm 4000 x 1100 x 900 h + Pallet mm 2000 x 1300 x 600 h

EPOKE sand and grit spreader

; Gross weight [kg]: 1760; Inspection Date: 2025-04-30; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 2330; Maximum lift capacity [kg]: 200

The machine is in good technical condition, after prior agreement it is possible to test it. Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360 30 Maximum punch diameter (size D) – single 81 mm Maximum punch diameter in magazine XMTE4M 4 x 31.7 mm Maximum punch diameter in magazine XMTE6M 6 x 24.0 mm Maximum punch diameter in magazine XMTE10M 2 x 24, 8 x 12.7 mm Working range in Y axis (with Multitool) 1300 mm Working range in Y axis (single tool) 1250 mm Working range in X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic clamp repositioning in X axis up to 10,000 mm Max. positioning speed in Y+X axis 80 m/min. Axis acceleration 10 m/sec Number of strokes – (step 1.0mm) 1000/min USB port 6 Weight 7800 kg Max. jaw opening 11 mm Max. stroke 31 mm Pow ...

Gruse ELS 2-13-9 Hydraulic Scissor Lift Table The Gruse ELS 2-13-9 is a stationary scissor lift table from the ELS series, which is designed for a load capacity of up to 2000 kg. It features a robust pipe shear design and is designed for use as an assembly or loading table. Features and equipment Safety equipment: The lift table is equipped with a circumferential contact strip (safety edge) on the table top, pipe rupture protection directly on the cylinder and electric shut-off valves. Construction: It has a stable upper and lower frame as well as maintenance-free scissor bearings. Operation: The control is standard via a dead man's hand button with emergency stop function. Payload: 2000 kg. Platform dimensions: 2000 x 1000 mm. Useful stroke: 1300 mm. Overall height (retracted): approx. 200 mm. Total height (extended): approx. 1500 mm. Lifting time: approx. 18 seconds.  ...

Hydraulic Cylinder EATON, HYDRO-LINE HR5F-2X4-N 1-2-N-V-V-1-1 HAHA2X4-N-Br / 02KR J081 210037 rod diameter: Ø 25 mm stroke: 100 mm pmax: 100 bar New !' Dimensions: 310 x 105 x 65 mm

Magnetic clamping table, electric ELECTROMAGNET ELSTERWERDA C400 TGL10272 Outer diameter: Ø 400 mm Power consumption: 125 W Operating voltage: 115 V DC Current consumption: 1,15 A Flange diameter: Ø 250 mm Bolt circle diameter: Ø 315 mm 4x Threaded hole: M12 x 1.75, Depth: 15 mm used, tested ! Dimensions: 400 x 400 x 90 mm

Enabling button, 3-stage EUCHNER ZSB 077040 ( ZSB077040 ) 230 V 4 A IP 65 with 5 m connection cable and plug ! Dimensions: 330 x 270 x 70 mm

Adjustment disc SEW Eurodrive 01276891 1647431 for gearboxes EV 01 Shaft diameter: Ø 20 / 19 mm Outer diameter: Ø 119 mm New ! Dimensions: 120 x 120 x 100 mm Weight: 1.3 kg

Care tub Arjo 077000-01 stainless steel

Brush deburring machine, double bench grinder, deburring machine ELBTALWERK SETr2x350 TGL 16570 Disc diameter Ø max 350 mm Disc width max 40 mm 1,5 kW 1500 rpm 380 V with 2 wire brushes Dimensions: 810 x 450 x 1220 mm

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 123 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 202 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 252 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 315 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-caterpillar-g3406-generat or-202-kva-gas/22424, , = More information =, , Empty weight: 7.500 kg, Type number: CATERPILLAR G3406 GENERATOR 202

turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 4 mm distance between columns: 3050 mm total power requirement: 8 kW weight of the machine ca.: 4.8 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electro Foam cutter Make Neolt Model Ekectro Foam 160 Year 1999 Max Size 45up to 160 cm Thickness up to 30 mm Details Electric knife movement, electric clamping, with second cutting head, will cut Foam & Forex Available direct

Combi steamer Eloma Model Multimax B 10-11 Cooking function, hot air and steam 11 Racks GN 1/1 Stainless steel Connection: 400V, 17.1 kW, 32A-CEE plug Approx. dimensions: 925 x 810 x 850 mm, WxDxH Occasion

Bread cutter Wabäma Model: Allround Economy Plus 380.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine roughly cleaned You can expect a large selection of bread slicers from us!

Wide belt sanding machine for wood, veneer and varnish Ernst LBK 1300 Grinding width: 1300mm Transverse grinding unit Longitudinal grinding unit

Wide belt grinding machine Boere Elite 1300 BK Grinding width max. 1300mm Grinding calibration roller from below

2x Tapping back-pressure turbine with spur gearbox and generator Nr1: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 3800 kW Speed: l0000 rpm Steam inlet pressure max. : 37 Steam inlet temperature max. 44 degrees Tapping pressure max. : 24 Tapping temperature : 390 degrees Evaporation pressure : 2 Normal absorption capacity : 27 t/h Maximum absorption capacity : 32 t/h Gearbox Make Voith, St.Pölten Type D 64 Rated power: 5,700 HP Speed 10 OOO/1 5oo rpm Backpressure steam turbine + gearbox + synchronous generator incl. auxiliaries Nr2: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 43oo kW Speed: 9900 rpm Steam inlet pressure max. 24 atü Steam inlet temperature max. 42o 00 Exhaust steam pressure 2 ata Normal absorption capacity 35 t/h Maximum absorption capacity 35.7 t/h Gearbox Make BHS  ...

The EWAB TS190 is a cutting-edge automated production system designed to streamline manufacturing processes while incorporating advanced laser technology. This versatile machine is equipped with a dedicated laser cell, enhancing its capabilities for precision cutting, engraving, and material processing. The integration of robotics, automation, and laser technology makes the EWAB TS190 a reliable solution for a wide range of industrial applications. Find more here - / Contact us at -

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - / Contact us at -

Chip shredder for material from the gunmetal or brass sector. Manufacturer: Erdwich Zerkleinerungsmaschine GmbH Condition: Little used; good to very good. - Range of application: Shredding of gunmetal or brass chips - Throughput capacity: 150 kg/h - Process sequence: The containers with the chips are fed into the hopper of the shredding machine by means of a forklift truck. The dumping height is approx. 2,950 mm. The shavings are crushed by the crushing plant and discharged into the on-site container. Occasional impurities are discharged via the impurity flap and and discharged into a separate container. Operating Instructions: 1 x in paper form; 1 x as CD-ROM in German or English. Temperatures: The system/machine as well as its switchgear combination (control) are designed for operation from 0 to 35 degrees room temperature at 60 % humidity. Deviating operating conditions r ...

2012 Envair CDC F 2G2D & 2012 REUKO Isolator and cleanroom Last filter change and last maintenance were on 09.01.2014 (see test report in the appendix) The air handling unit is designed for a room size of approx. 12 m2 (file room 3.46 in the appendix). The isolator has the complete documentation incl. test reports. It has been used very little (see current operating hours below) and is connected to an air handling unit (designed for approx. 12 m2). These are the technical parameters: REUKO climate service ENVAIR Isolator (Cytostatic isolator (CMR) 1.2m) a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, For the processing of: - Cytostatics - antivirals -hazardo ...

Calender consisting of: (Version: 2024-02) Manufacturer: Eduard Küsters Maschinenfabrik_Krefeld Thermobonding calender, type 413.50 YOC: 1985 Nominal width: 3700 mm Fabric width: 3500 mm / conversion to 3200 mm Total force: 555 kN Line force: 150 N/mm Production speed: 10-150 m/min Roller Equipment: 1 Küsters floating roller (S-roller) 1 Raculan 1 steel roller Non-binding information from the manufacturer. Technical documentation and electrical documents available Special feature: Heat exchanger included in scope of delivery. Electric heater no longer active, therefore conversion to heating via external thermal oil system (not included). Sale: as seen, without further warranty Condition: ready for use Find more here - / Contact us at -

Electroplating test system for high flow / separation It does not have a control/transport cart and has not yet been used. That was our model system. It is a separator bath with 3 positions The positions are designed for vertical and horizontal arrival including a 25mm movement of goods. The buyer can view the system, and also dismantle it. High-performance test containers for ViaFill and AR 1:40 Features: - Aspect ratio up to 1:40 - Multifunctional system for panel & pattern plating, blind micro via plating, via filling plating, button and bridge plating - Suitable for flex circuit substrates up to 6.2 mm thick - Segmented anodes with 3 inert anodes per PCB - 372 slots for eductors with horizontal flow per PCB - Two-dimensional fabric movement in the copper cell The copper cell: Our copper cell is designed for PCBs from 18" x 25" to 21" x 24". Hydrodynamic conditions are gu ...

2003 Reichenbacher Eco 1419 B CNC portal milling machine Year of construction 2003 Number of spindles: 8 drilling spindles Tool places: 12 Speed range: 1500-24000 rpm Find more here - / Contact us at -

2000 Sato Elektronik SATRONIK Flame cutting machine Find more here - / Contact us at -

1998 Sato Elektronik SATRONIK CNC 801 Flame cutting machine Find more here - / Contact us at -

Göpel Electronics Opticon Smartline The software dongle would have to be renewed at Göpel, which we can arrange Find more here - / Contact us at -

2013 Ibarmia ZVH 45/L1600 Extreme 4 axis vertical machining center Type: ZVH 45/L1600 Extreme Manufacturer: Ibarmia Year: 2013 Control: Fanuc X- 1600 mm Y- 800 mm Z- 900 mm Rotation angle +/-105° Maximum spindle speed 12000 rpm Number of tools in the magazine: 24 Work table dimensions: 2000 x 850 mm Included a wall that divides the table into two parts, so it is possible to machine separately in one part and clamp in the other part Machine in good condition, under power. Find more here - / Contact us at -

2019 Soft Energy Controls CES0007 Ranking machine End of line testing machine which sorts and grades cylindrical and prismatic battery cells. It is quite a specific piece of equipment, but it has some components that have value and could be repurposed in other machines. Originally from Japan. Main functions: DCIR testing and grading of cells Sorting of prismatic and cylindrical cells based on the cell grade into trays Find more here - / Contact us at -

2016 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

LWA (Laurijsen WeegAutomaten) Atoma E233 Technical data Construction data: Machine type : Atoma E233 Weighing range : Weighing speed : up to 15 weighings per minute The following products can be processed on the automatic weighing machine: General dimensions: Overall dimensions W x D x H : 2,000 mm x 650 mm x 1,100 mm Total weight: approx. 500 kg Required power supply: Supply voltage : 230 V alternating current Control voltage : 24 V direct current Operating pressure : 4 to 6 bar Protection class : IP 65 Mains earthing : for example TN system Frequency : 50 Hz +/- 1 % continuous operation +/- 2 % short time Physical operating conditions: Ambient temperature, in operation : +10 to +40 degrees Celsius Relative humidity (RH) : 30% to 85%, non-condensing Lighting : normal ambient lighting. Altitude : up to a maximum of 1000 metres above sea level. Find more here - / C ...

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - / Contact us at -

1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - / Contact us at -

Machine type : Flame cutting system Manufacturer: ESAB Model : SXE-P1 4500 RH Year of manufacture : 1999 Dimensions, Weights, and Power Supply: - Track Height: 500 mm - Track Length: 14,000 mm - Cutting Length: 12,000 mm - Cutting Thickness: 150 mm - Machine Height: 1,900 mm - Machine Length: 2,250 mm - Height of Cutting Table: 700 mm - Machine Width: 5,270 mm - Cutting Width: 3,000 mm - Maximum Machine Speed: 12,000 mm/min - Machine Weight: 2,500 kg - Maximum Number of Single Torches: 2 x 381 + 1 - Fuel Gas: Acetylene - Voltage: 230 V / 50 Hz - Power Consumption: 2 KVA Find more here - / Contact us at -

Manufacturer: OKUMA Model : Eurocenter V50 Year of construction : 2007 Operating hours: 11465 Accessories: dividing head, coolant tank with pump. Voltage: 400 V Phases: 3 Phase Frequency: 50 Hz Current: 28 A Power: 32 kW Fuse Rating: 45 A Certification: CE marked Find more here - / Contact us at -

CNC vertical lathe Type: VL 5i F Manufacturer: Emag Year: 2016 number of axes : 2 max clearance diameter : 250 mm max part diameter : 220 mm machining height : 175 mm strokes (X/Z) : 660 / 300 mm quick feed (X/Z) : 60 / 30 m/min turret number of positions : 12 tool-holder : VDI40 spindle power : 28 /18 kW speed : 0 to 4.500 rpm index precision C axis : 0,001° part magazine capacity diameter 30 to 85 mm : 37 pos.,max 4.5 kg part magazine capacity diameter 30 to 160 mm : 22 pos.,max 8 kg part magazine capacity diameter 80 to 220 mm : 16 pos.,max 10 kg part height max : 175 mm voltage : 400 V installed power : 36 kW dimensions floor space: 2266 x 4184 mm height : 3200 mm weight : 7.500 kg Chip conveyor Machine in good condition, under power Find more here - / Contact us at -

Type of Machine: Bar Machining Center Condition: Used Year of Manufacture: 2008 Power Supply: 3-Phase, 400 V, 50/60 Hz Current: 24 A Compressed Air Requirement: 6 bar Processing Speed: 21,000 1/min (RPM) Find more here - / Contact us at -

Manufacturer: Elumatec Type: SLK118/00 Year of Manufacture: September 2008 Type of Machine: CNC Profile Milling Machine (Template-Free Copy Milling Machine) Find more here - / Contact us at -