We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,260 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 460 x 410 mm - Screw diameter: 25 mm - Shot weight max: 54 g - Injection rate: 108 cm?/s - Injection pressure: 2.400 bar - Injection volume: 59 cm? - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 225 / 28 mm / kN - Clamping force: 1.000 kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Daylight between platens max: 800 mm - Platen size (h x v): 650 x 600 mm - Cascades / Sequential valve gates: n/a - Heating zones: 4 2 - Control: CC200 - Core pulls: n/a - Oil tank capacity: - l - Operating hours: 16.280 - Power: installed max: 22 kW - Weight: 4.500 kg - Dimensions (long x wide x high): 4.300 x 1.300 x 1.900 mm
used
Manufacturer: AEG-ELOTHERM Type: ELBOMAT 443B Year of construction: 1994
used
Die-sinking EDM machine Manufacturer: AEG-ELOTHERM -Type: ELBOMAT 443B -Dimensions: 2600 x 2500 x 3300 mm -Object table size: 1200x800mm -Tool table: 280x200mm Status: Not tested! Electrical control panel -Dimensions: 1200 x 1500 x 2200 mm Cooling unit -Dimensions: 1200 x 1100 x 2200 mm
used
Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!
used
verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen
used
Blow molding machine for sale, fully functional. Manufacturer Extraplast Machinen GmbH Year 2008 Engine power 80kW Heating power 49kW Max. hydraulic pressure 250bar Max air pressure 10bar Working pressure 330 bar Form clamping 450 x 850mm Price negotiable - make an offer
used
Single head welding machine - ELUMATEC crushed arms and wrinkled one piece of cover Year: 2003
used
This Exeron EDM 310 MF 20 Erosion machine was manufactured in the year 2008 in Germany. It is equipped with an Exeron control unit. The machine was fully retrofitted in 2023 with 6 month warranty.
used
Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg
used
Frequency converter, frequency converter, drive converter, controller, variable speed drive, EMC module, mains filter -Manufacturer: SEW Eurodrive, EMC module -Type: EF075-503 -Voltage: 3x230V...500V I=20A -Dimensions: 340/170/H50 mm -Weight: 1.8 kg
used
Module converter, electronic module -Handover: in the current state as viewed -Electronic module: defective -Board type: ESS FE13-3 US4-1 -Dimensions: 260/180/H100 mm -Weight: 0.8 kg
used
Cable protection ring -Design: extra long -EWEM / XL: 4 x 35 - 150 mm² -Number: 2 pieces -Price: complete -Dimension: Ø 62 x 220 mm -Weight: 0.1 kg/piece
used
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Projection: 190 mm -Strokes: 105 strokes/min -Plunger adjustable: 50 mm -Plunger area 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm
used
Elwa bag machine +Dietrich electronik perforator , max. whidth sealing 1250mm , min. 300mm . Thickness from 2x0,02 -0.2 . Speed 110cycles/minute when was new . Needles collection for the bags.
used
The Envirolyte ELA-2000 has been designed for production of Neutral Anolyte and Catholyte. Some automation and easy operating procedures give the added benefits to rapid elivery of safe and fast acting disinfectan - Neutral Anolyte. The strenght of Neutral Anolyte in terms of active chlorine concentration can be adjusted by current setting in de plc and valves.
used
Instruction manual is available.
used
General SKU212T133 LocationBarneveld MakeEnco No.T6773/1 Year of construction2008 Pressure Vacuum possible jacketcheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface61 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface61m² Tube capacity90 Ltr. Number of tubes:240 Tube diameter25mm Tube length590mm Wall thickness tubes2mm Max. temperature150°C Shell capacity400 Ltr. Shell diameter850x600mm Shell length2220mm Wall thickness shell5mm Max. temperature150°C. Shell connectionsDN40 (2x) Cover connectionsDN400 (2x) Information Floorspace0,8x0,55m CEcheck Total height2, ...
used
General SKU212T132 LocationBarneveld MakeEnco No.T6773/2 Year of construction2008 Pressure Vacuum possiblecheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface58.55 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Heat exchangercheck Heating surface58,55 m² Tube capacity105 Ltr. Number of tubes:312 Tube diameter25 mm Tube length440 mm Wall thickness tubes2 mm Max. temperature150 °C Shell capacity270 Ltr. Shell length1336 mm Max. temperature150 °C Shell connectionsDN400 (2x) Cover connectionsDN40 (2x) Information Floorspace1,4x0,7 m CEcheck Total height0,7 m Weight550 kgShell and tube heat exchangersEncoHeat exchangers > Shell and ...
used
General SKU309N511 LocationBarneveld MakeGEA Ahlborn GmbH&Co Sarstedt TypeNT-250 S B-10 No.140/10838 Year of construction2007 Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface79.9 m2 Specified Features - Plate heat exchanger MaterialStainless steel (Sandvik 254 SMO) Plate heat exchangerscheck Heating surface79,9 m2 Capacity2x 151,8 Ltr Number of platens87 Connections(4x) dia.250mm Max. temperature60 Degr.C. Information Floorspace1,6x0,9 M Total height2,3 M Weight2322 KGPlate heat exchangersGEA EcoflexHeat exchangers > Plate heat exchangersBrand > GEA Ecoflex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU309N513 LocationBarneveld MakeGEA Ecoflex GmbH Sarstedt TypeNT-250 S B-10 No.140/10839 Year of construction2007 Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface79.9 m2 Specified Features - Plate heat exchanger MaterialStainless steel (Sandvik 254 SMO) Plate heat exchangerscheck Heating surface79,9 m2 Capacity2x 151,8 Ltr Number of platens87 Connections(4x) dia.250mm Max. temperature60 Degr.C Information Floorspace1,6x0,9 M Total height2,3 M Weight2322 KGPlate heat exchangersGEA EcoflexHeat exchangers > Plate heat exchangersBrand > GEA Ecoflex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU309N512 LocationBarneveld MakeGEA Ecoflex GmbH Sarstedt TypeNT-250 S B-10 No.140/10840 Year of construction2007 Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface79.9 m2 Specified Features - Plate heat exchanger MaterialStainless steel (Sandvik 254 SMO) Plate heat exchangerscheck Heating surface79,9 m2 Capacity2x 151,8 Ltr Number of platens87 Connections4x dia.250mm Max. temperature60 Degr.C. Information Floorspace1,6x0,9 M Total height2,3 M Weight2322 KGPlate heat exchangersGEA EcoflexHeat exchangers > Plate heat exchangersBrand > GEA Ecoflex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU309N518 LocationBarneveld MakeEbner Anlagen und Aparate Germany No.062404700 Year of construction2007 Material Shell materialStainless steel 1.4462 (318LN) Cover materialStainless steel 1.4462 (318LN) Tube materialStainless steel 1.4462 (318LN) Pressure Vacuum possiblecheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface120 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface120 m2 Tube capacity820 Ltr Number of tubes:334 Tube diameter25,0mm Tube length5000mm Wall thickness tubes1,0mm Max. temperature10-100 gr.C, Shell capacity1600 Ltr Shell diameter750mm Shell length5000mm Wall thickness shell4,0mm Max. temperature10-120 gr.C Shell connecti ...
used
Die sinking EDM elbomat p1 tub 1270x1070 strokes 1000x1000x550 with 3000l dielectric tank weight allowed on the table 4000kg. permissible weight on the head 1250kg. the machine is in perfect working order and can be seen in operation.
used
Description: Fabrication number: R2EV3202 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 33 A Control system: SIEMENS SINUMERIK Turning length: approx. 500 mm Travel distances: Z: approx. 400 mm X: approx. 400 mm Incl. a 12-position tool turret with driven tool stations The machine has a C-axis Attention: the machine is delivered without any visible tool holders Tool holder: VDI 30 weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,700 x 1,900 mm
used
Description: Factory number: R6ET1802 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 38 A Control: SIEMENS SINUMERIK Turning length: approx. 1000 mm Travel: X: approx. 400 mm Z: approx. 600 mm The machine is equipped with a tailstock and a two-jaw chuck from the manufacturer SCHUNK (diameter: 250 mm) Attention: without the tool holders on the tool turret Incl. chip conveyor Tool holder: VDI 30 weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,000 mm
used
Description: Serial number: P5076870 Pressing force: 15 to For further technical data see type plate With press protection grid Manufacturer: LEINHAAS weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm
used
Description: Includes accessories such as replacement tips, dial gauge holder and more. (see pictures) Approx. Onsite Dimension. (l x w x h): 400 x 350 x 100 mm, weight approx.: 10 kg
used
General SKU321U762 LocationBarneveld MakeGea TypeVT 40 DS CDL-C-16 No.171/23406 Year of construction07.2020 Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface77 m2 Size length1300 mm Sizes width525 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface77 m² Capacity116.31 Ltr. (zone A and B) Number of platens124 Plate sizes615x1016 mm ConnectionsDN100 (4x) Max. temperature100 °C MaterialStainless steel 1.4306 (304L) Information Total height1,60 m Weight1135 kg Floorspace0,53 x 1,30 mPlate heat exchangersGEA EcoflexHeat exchangers > Plate heat exchangersBrand > GEA Ecoflex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Ple ...
used
There are two identical eroding machines available, x-travel: 500mm, y-travel: 400mm, z-travel: 300mm, controls: ELOTRACE 3, operational hours counter: 56,600h.
used
Controls: AEG-Elotherm ELOPULS, with documentation.
used
Pressure:063 t throat:250 mm stroke:10 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 500 mm hole in the table:180 x 140 mm table height over floor:700 mm ram surface:360 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,8 t Dimensions (WxDxH):1,9 x 1,7 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical
used
An on-site inspection is possible.
used
Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm
used
Specifications 1.3.1 Dimensions, space requirements, weight, energy requirements Dimensions, weight Machine incl. control cabinet Length x Width (depth) x Height (incl. Levelling elements): approx. 3,600 mm x approx. 2,400 mm x approx. 2,500 mm Minimum height requirement: 3,500 mm Net weight: approx. 8,500 kg Pay attention to the set-up plan! It contains all connection data, space conditions, etc. necessary for energy supply and installation. 1.3.2 Spray-suppression cabin, full-space cover of the machine View into the machine interior: safety window (window composite) Design: polycarbonate lens protected on both sides Cover of mounting or maintenance openings: Sliding door(s) hinged and/or removable body parts Cover of the operators side, loading and unloading opening: sliding door, loading hatch Activity: - Foldable body parts,sliding doors of assembly and maintenance openings: manual - ...
used
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from electric forklift Rapid RVT 2500 -Hydraulic pump: Hidroirma type UP100K163-01 -Motor: Efel 36808 24V -with: tank and control valve -Dimensions: 210/170/H360 mm -Weight: 10.5 kg
used
Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Construction: hollow shaft -Diameter hollow shaft: 30 mm -Protection class: EX -Number: 3x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg
used
Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Actuator for: gate valves, locks, ... -Speed: 40 rpm -Power: 0.7 kW -Construction: hollow shaft -Diameter hollow shaft: 41 mm -Protection class: IP 57 -Number: 1x drives available -Price: per piece -Dimensions: 500/520/H310 mm -Weight: 32 kg
used
CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repairs of engines ...
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Longitudinal travel (X-axis): 1020 mm Vertical travel (z axis): 1020 mm Axial motion:: C = 240° Voltage 50 Hz 3x: 400 Volt Driving motor (motor power): 1.1 kW Total power required: 3 kVA Dimensions: Length: 2200 mm Width: 1300 mm Height: 2230 mm Description: Rotary Magazin 30 x ITS 148 + 150 pos 50x50
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Longitudinal travel (X-axis): 6.5 mm Transversal travel (y-axis): 6.5 mm Speeds from: 5800 rpm Diameter: 40 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.73 kW Machine´s weight about: 290 kg Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 1270 mm
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Longitudinal travel (X-axis): 6.5 mm Transversal travel (y-axis): 6.5 mm Speeds from: 5800 rpm Diameter: 40 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.73 kW Machine´s weight about: 290 kg Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 1270 mm
used
Key data: 160
Extruder for pellet manufacturing Brand: Erema, model: RM160 TF-VSV, year: 2001, 160 mm Ø, double degasser, motor: 200 kw, agglomerator with motor: 132 kw, hydraulic filter changer, wire head, bathtub, vacuum pump and Noodle Previero with vibrating screen. Complete dehumidification installation.
used
Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Motor power: 15 kW / 2935 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg
used
Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.
used
Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Hi here sell a Schmitt enertec BHKW which is immediately ready for use and for sale also can be tested Data: Motor you E2876 R6 210 KW generator LEROY SOMER year: 2006 Hours of operation: ca 11000 CHP is until was run very well to expand only expanded because some customers have not finished it to pay bills. If you have questions I am under to you available: Andreas.Peters89@gmx.de
used
Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel
used
Turning + Thread cutting semi-automatic M32 The machine was never used for production. Suitable for internal and external threads max. diameter 90 mm max. turning length 45 mm max. thread pitch 1.5 mm max. thread length 14 mm Max. Thread pitch multi-speed 3 mm largest thread length multi-speed 21 mm Drive motor approx. 3 hp Machine weight 800 Kg
used
Key data: 125
Extruder 1 spindle: 125 mm Ø, 35 L/D, brand: Eurotecno, with forced feeding, degassing. Motor: 160Kw, hydraulic filter changer: 250, wire head. Bathtub and noodle, Brand: RIETER 200. Year: 1999. Production: 500Kg/h.
used
Key data: 90
Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.