e h used for sale

Etipack Strong 200 automatic labeller; cleaned and tested; Working width 20-200mm; Speed 20m/min.; Speed adjustable; with tripod. Automatic labeller Etipack Strong 200; cleaned and checked; working width 20-200mm; speed up to 20m/min.; adjustable in speed; included stand.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 2,4 x 2,8 m Brand DMG Mori Seiki Machine no F666 Type DMC 635 V Ecoline Control Siemens 840D Year of make 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle taper SK40 Speed maximum 12.000 RPM Chip transport Machine size 3.400 x 2.400 x 2.800 mm Machine weight 3.950 kg Tool magazine positions: 30 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.25 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 490/200/H170 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Weight: 18.5 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 21/41 rpm -Power: 0.88/1.3 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 660/230/H300 mm -Weight: 59 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 35 rpm -Power: 0.25 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 490/200/H170 mm -Weight: 19 kg

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: Siemens 840D total power requirement: 13/9 kW weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,4 x 2,5 x 2,2 m Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 90 mm

A first-class extrusion recycling brand EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 12 rpm -Power: 0.25 kW -Hollow shaft diameter: Ø 25 mm -Design: Hollow shaft angle -Protection class: IP 44 -Brake -Dimensions: 450/195/H190 mm -Weight: 23.2 kg

Centrifugal pump, water pump -Type plate: unfortunately not available -Delivery capacity: 20-50 m³/h -Max. H: 14-9 mWs -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection output: DN40 -Dimensions: 540/290/H310 mm -Weight: 49kg

Key data: 90 mm

EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 460 volts, 60 hertz (US standard), available immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

amount: 2 STK weight - pallet system: 11 kg dimensions: 540 x 2000 x 100 mm Hobbing cutter possibly Pfauter P 400 - 2 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc 18iTB Main spindle passage 42 mm 6 axes Front horizontal slide designed as cross slide (X1/Z1) Z2 turret slide including: 6-fold turret, IKZ, turret can be swivelled on both sides Rear horizontal slide x2 Two vertical slides X3 and X4 10 tool positions available Conveyor Bar Feeder SAMECA

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 11/21 rpm -Power: 0.2/0.28 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Brake -Dimensions: 450/200/H220 mm -Weight: 24 kg

Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 550/290/H276 mm -Weight: 17 kg

wire electrode, welding wire, welding wire -Net weight: 9 kg -Number: 1x packages available -Price: per package -Weight complete: 9.5 kg/package

workpiece length: 400 mm work piece width: 400 mm workpiece height: 100 mm total power requirement: ? kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,70,71,6 m No. 5006 Filing machine ERHARDT + SPIESS / H&K Working area: Table 400 x 400 Drive: ? 2 hold-down devices File guide Adjustable stroke rate 75-300 min-1 Space requirement approx. 650 x 650 x (+500) x 1600 mm Weight approx. 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 550 KW, 11000 V

MAN E3262 LE202 gas generators Year of make 2015 50 Hz 550 Kw at 1500 RPM 4 units available 2 units with 0 hours and 2 units with very low working hours Auxiliary equipment also available

S. No.: 6173431 Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago

Easiweigh Ace 2V Linear weigher Serial: 991278 Stainless, single head linear weigher, with foot pedal, 1Ph

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 0.8/1.6 rpm -Power: 0.12/0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 45 mm -Protection class: IP 55 -Dimensions: 670/300/H320 mm -Weight: 69 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 161 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 35 mm -Protection class: IP 55 -Number: 3x engines available -Price: per piece -Dimensions: 520/270/H300 mm -Weight: 45 kg

CNC Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of Make: 2000 CNC Control: Fanuc Working area without replacement: 2500 x 1500 mm Material thickness max.: 8 mm Punching force: 30 tons. Turret with 46 tool positions, including 4 index stations size D 3 programmable claws Metal table Used exclusively in single-shift operation incl. tools WILSON TOOL

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 28 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 605/345/H330 mm -Weight: 65 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 27 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Number: 4x engines available -Price: per piece -Dimensions: 350/190/H185 mm -Weight: 13.2 kg/piece

centrifugal pump, water pump -Flow rate: 5-42 m³/h -Motor power: 0.75 kW -Speed: 1410 rpm -Inlet pipe connection: DN50 -Pipe connection outlet: DN50 - Quantity: 1 pieces -Dimensions: 570/230/H310 mm -Weight: 40kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 13 rpm -Power: 0.18 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 440/175/H185 mm -Weight: 21 kg

For sale, we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. Main features of the machine (overall): • Possibility of combining punching and laser burning • Automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and replacement of pallets during the operation of the machine • automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of loading sheet metal during machine operation • Automatic bale boom 1500x400mm (two conveyor belts for details) • Turning station with 41 fixed and 4 rotating stations • 3 manually adjustable paws • Cutting elements on length 3020x1500 • Laser cut length 2000x1500 • Max. sheet thickness 6mm (due to brush table) • Thread function • Pneumatic low bracket Accessories for th ...

Edeleanu GmbH / Shell 3. Sulphur Recovery (Claus-1) Year: 1956 Make: Edeleanu GmbH / Shell Conversion of the hydrogen sulfide produced in the 3 DIPA regenerators into elemental sulfur. (H2S recovery efficiency = 95.4%) Year of manufacture 1956 (1996 new furnace) Process Design by Shell, Claus Process Process Engineering by Edeleanu GmbH Operational operating throughput = 6 to 36 t/d H2S Operational operating temperature = 250 to 340°C Operational operating pressure = 0,3 bar 2022 – Decommissioning

Edeleanu GmbH / Shell Fuel Gas Treater (HG Treater) (1978) Year: 1978 Make: Edeleanu GmbH / Shell Treatment of process gases (removal of H2S) by Diisopropanolamine (DIPA) washing. Year of manufacture 1978 Process Design by Shell Process Engineering by Edeleanu GmbH Throughput max. 180 t/d (DIPA-circulation max. 260 t/d) Operational operating temperature = 30 to 50°C (max. = 120°C) Operational operating pressure = 4,0 to 5,0 bar (max. = 12,5 bar) 2022 – Decommissioning

One used EVG TSD 7 double step welding lines for the production of standard and special truss girders (e.g. decking girders) in large to mid-size series for girders from min 90mm to max 250mm height Upper wire: 5.0mm to 12.0mm, ripped and smooth Lower wires: 4.0mm to 10.0mm Zig Zack wires: 4.0mm to 7.0mm Max length of girder: 12.000mm

x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: HSK-A63 NC-Tilting round table:: table surface area: 700 x 500 mm Swivel range B-Axis: 0 - 180 ° Swivel range C-Axis: 0,001 ° max. table load: 350 kg center hole: 30 H6 mm T-slots: 7x 14H7 x 63 mm table turning speeds: 21,5 rpm tool magazin:: number of toolpositions: 32 pos. max. tool length: 315 mm max. tool diameter: 105 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 50 / 50 / 50 m/min feed speeds: 20.000 mm/min Feed force: X / Y / Z: 8 / 8 / 7 kN total power requirement: 50 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 6,5 x 3,5 x 3,5 m Documents: Chip-Tray: Coolantsystem: ...

FSA Combined MIG/MMA Welding Machine MIG Shielded Gas Welding 30 - 315 A MMA Electrode Welding 10 - 200 A MIG burner hose 2 m Mass clamp 3 m Reducer Electrode holder Weight approx. 40 kg

weight max. in kg: 600 kg fork length: 1150 mm stroke height: 2700 mm total power requirement: ? kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: - kW tool adaptor: KOMET PKB 200-20-112 total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 1,6 0,7 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 670 rpm -Power: 0.26 kW -Design: B3 -Diameter shaft: 25 mm -Protection rating: IP 54 -Quantity: 1 piece available -Dimensions: 215/170/H420 mm -Weight: 17.3kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 355/182/H175 mm -Weight: 13 kg

2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 – used - : Price per piece from location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of Make: 2007 Q400.00m3/h H 14,00m N 1460 1/min Condition: good Available: immediately Location: Frankenberg camp / Saxony

Output module, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: BuR -Type: ECP6D4-0 -Number: 2x control cards available -Price: per piece -Dimensions: 220/120/H20 mm -Weight: 0.2 kg

Output module, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: BuR -Type: E163 -Number: 1x control cards available -Price: per piece -Dimensions: 220/135/H20 mm -Weight: 0.2 kg

Output module, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: BuR -Type: ECPP40-01 -Number: 1x control cards available -Price: per piece -Dimensions: 220/140/H20 mm -Weight: 0.39 kg

Step regulator, electronic control -Manufacturer: ELREHA -Type: STG-1903 -Type: STG1903 -Number: 2x control cards available -Price: per piece -Dimensions: 70/195/H130 mm -Weight: 0.9 kg

Slitter rewinder Euromac The machine is like new and has only 5800 bh Applications :Foil, Paper _Laminate and Ethylenium Foil, Flexible film =15 μm - 200 μm Paper = 30 to 120 g/mm² Aluminium foil: Coated aluminum foil 25-70 my, Laminated Alufoils 40 -150 g/m2 Embossed Alufoils 105 -160 my Max. working width = 1200 mm Min. working width = 25 mm Max. speed = 500 m/min, Diameter rewinder = max. 600 mm 2x friction shafts = 76 mm, 2x friction shafts = 150/ 152 mm, 2x expansion shafts = 76 mm 2x expansion shafts = 150/ 152 mm The winding can be operated with contact (lay-up roller) or with gap. Unwinder (shaftless) diameter diameter max.= 1000 mm / core 76/ 150 /152 mm, Cutting system = paper cutting, Side Edge Control Manufacturer BST Gluing table at the unwinder, Laser system for sleeve positioning Roll removal device, Trolley for changing the lowe ...

M. No.: 6386927 Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Hydraulic precision drives for knives and press beams Continuously adjustable pressing pressure with display 99 memory programs with up to 99 steps

Manufacturer: ETSCHEID Content: 2000 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit very good condition, fully functional

Manufacturer: ETSCHEID Content: 1500 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit Condition: very good

Product number: 2995 Type: HP-300 Belt width: 300 mm Power: 3 x 400V, 50Hz, 16A Dimensions: 1650 x 700 x 1600 mm Adjustable height between belts

Technical data UV Flexo unit. It can be mounted in-line with any printing machine (offset, flexo, gravure) Print type. UV Flexo Material: Paper composites, 25-200 gs/m Max. material width 820 mm Hyperbaric chamber doctor blades (Harris & Bruno) Ceramic anilox rollers (Kurt Zechner) Druckkzylinder sleeve system (Miller Graphics or Rotec) Max.r+ print length 840 mm Max. speed 200 m/min Drive servo motors (Lenze) Pumps (color) Watson & Marlowe Nordson UV Lamps