133,994 used machines on RESALE, but how to find them? Machine Search
grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M4,7 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M4,5 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
325,000 Litre Stainless Steel Storage Tanks with Insulation Excellent condition SBS will carry out complete turnkey project from dismantle to chartering of ship. Please note these tanks must be transported by ship and therefor your site must be near to the port.
Gear motor, electric motor, electric gear motor -Speed: 15 rpm -Power: 0.25 kW -Diameter shaft: Ø 25 mm -Construction: B5 angle -Protection class: IP 54 -Brake -Number: 8x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 26 kg
Gear motor, electric motor, electric gear motor -Speed: 136 rpm -Power: 0.37 kW -Construction: B3 angle -Wave output: 2 -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 440/230/H220 mm -Weight: 21 kg
Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Brake: 24 volts -Number: 2x motors available -Price: per piece -Dimensions: 430/210/H220 mm -Weight: 16.8 kg
Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Brake -Dimensions: 465/185/H200 mm -Weight: 18.8 kg
Gear motor, electric motor, electric gear motor -Speed: 30 rpm -Power: 0.75 kW -Diameter shaft: Ø 40 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 555/250/H250 mm -Weight: 40 kg
Gear motor, electric motor, three-phase motor -Speed: 84 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 350/185/H200 mm -Weight: 14.2 kg
Gear motor, electric motor, three-phase motor -Speed: 91 rpm -Power: 0.25 kW -Construction: B14 angle -Diameter hollow shaft: Ø 18 mm -Protection class: IP 54 -Dimensions: 300/120/H170 mm -Weight: 8.4 kg
Gear motor, electric motor, three-phase motor -Speed: 150 rpm -Power: 0.18 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 500/215/H180 mm -Weight: 26 kg
Gear motor, electric motor, three-phase motor -Speed: 57 rpm -Power: 1.1 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Dimensions: 620/260/H260 mm -Weight: 40 kg
used
Extrusion recycling line made by EREMA type that has only been in use for a few years VACUREMA ADVANCED 1310T for the processing of rPET, Year of construction 2017, commissioning 2019, Capacity 600 kg/h, Approval in accordance with the standards of the F.D.A. (USA) and ESFA (EU) for the approval of the rPET granules produced with it is available. You can find more details at EREMA "Vacurema Advanced". Delivery Time: Short Term. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
Gear motor, electric motor, three-phase motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Dimensions: 565/250/H250 mm -Weight: 33 kg
Gear motor, electric motor -Speed: 42 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 490/203/H220 mm -Weight: 21 kg
ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use
Gear motor, electric motor, electric gear motor -Speed: 164 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/190/H230 mm -Weight: 33 kg
Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 454/200/H155 mm -Weight: 19 kg
Geared motor, electric motor, electric geared motor -Speed: 49 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: 16 mm -Protection class: IP 54 -Dimensions: 330/190/H140 mm -Weight: 11.6 kg
General Electric Äkta Valves and Pumps PV 908 INV 907 IV 908 P 960
Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg
Gear motor, electric motor, electric gear motor -Speed: 179 rpm -Power: 9 kW -Design: B3 -Shaft diameter: 55 mm -Protection class: IP 44 -Quantity: 1 piece available -Price: per piece -Dimensions: 1000/310/H365 mm -Weight: 181 kg
tool clamping area: 1 - 32 mm weight: 8 - 12 kg Driven toolholders 1: Eppinger, Mod. 6035-3: 270 Euro 2: Eppinger, Mod. 6052: 360 Euro 3: Eppinger, Mod. 6049-2: 360 Euro 4: Wendel, Mod. A 3930: 720 Euro 5: Eppinger, Mod. 10809-1-3: 720 Euro Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Can filler Eurostar type 9 TWIN with 9 filling valves and 2 x 1head seamer capacity: approx. 2.500 - 3.00 cph year of manufacturing: 2016 can format: 211/202 standard cans
Gear motor, angular gear motor, electric motor Electric gear motor -Angular gear motor -Motor power: 0.55 kW -Speed: 104 rpm -Shaft diameter: 20 mm -Construction: B5 angle -Brake -Number: 2x motors available -Price: per piece -Dimensions: 485/240/H160 mm -Weight: 20 kg
Gear motor electric motor -Speed: 125 rpm -Power: 0.44 kW -ED: 60% -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Brake -Dimensions: 410/260/H225 mm -Weight: 22 kg
Gear motor, electric motor -Speed: 79 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 415/250/H250 mm -Weight: 26 kg
Banderolier BandAll BA BA 32-20/77 ERH; serviced and inspected by customer service; Belt width 75mm; Frame size 320x200mm; Print mark control; suitable for paper and foil; Stainless steel; Automatic operation or by foot switch; Meter reading 102900. Banding machine BandAll BA 32-20/77 ERH; checked and tested by the support of BandAll; band width 75mm; frame size 320x200mm; Print Mark Control; used for paper or foil; stainless steel cover; automatic banding or using by foot switch; counter 102900.
4 x valve block with interface module EX250-SDN1 and with 20 x solenoid valve SV2100R-5FU
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Traglsat: 7000kg Load center of gravity: 600mm Battery: 80V SN: T322080279
Roller chain, drive chain -per chain length: 1.25 m -20B-1 roller chain -Number: 17x chains available -per chain length: 1.25 m -Price: 30 Eur/m -Weight: 4.6 kg
Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg
geared motor, electric motor -with integrated frequency converter 0.37 kW -Speed: 60 rpm -Power: 0.55 kW -Design: B3 angle -Shaft diameter: Ø 20 mm -Brake -Protection class: IP 54 -Dimensions: 380/160/H240 mm -Weight: 13.5 kg
Robuschi ES55/2P-RVP80-CAR Blower Serial: 4001 Air blower, in box, 30Kw, 3Ph
Centrifugal fan High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph
Pneumatic cylinder, air cylinder, pneumatic ram, air ram, rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Stroke: 83 mm -Piston diameter: mm -Piston rod: 30 mm (connection thread) -Total length: mm -Total length extended: mm -Dimensions: 530/380/H380 mm -Weight: 26 kg
Gear motor, electric motor -Speed: 94 rpm -Power: 0.15 kW -Construction: B5 angle -Diameter hollow shaft: Ø 22 mm -Protection class: IP 54 -Brake -Number: 1x engine available -Price: per piece -Weight: 14.3 kg
Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg
pressure: 60 t throat: 280 mm stroke: 10-90 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 750x540 mm ram surface: 600x200 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø35 mm weight of the machine ca.: 3,7 t dimensions of the machine ca.: 1800x1800x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros
Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector
Gear motor, electric motor, electric gear motor -Speed: 5 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 570/160/H215 mm -Weight: 18.2 kg
Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/200/H240 mm -Weight: 27 kg
Gear motor, electric motor, three-phase motor -Speed: 95 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 390/210/H180 mm -Weight: 16.7 kg
maximum number of results exceeded
please refine your search
