e h used for sale

Speed control unit GAC-ESD5550 3 pieces available, 1x with original packaging, 2x without

Speed control unit GAC-ESD5131 1 piece(s) available, with original packaging

Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg

Control panel fire alarm center GE-1X-F2-04 for sale, with original packaging

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...

clamping force: 800 kN injection volume: 106 / 42 cm³ screw diameter: 30 / 22 mm platen size: 600 x 600 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for th ...

Used aseptic filler made by FBR ELPO, new 1997. Machine comes with steriliser made by CFT Rossi Catelli, new 2000.

Used labeling machine made by Exelsior Karvina s.r.o. (Czech Republic)

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Motor power grinding wheelhead: 15 Cv, Total power: 16.5 Cv, Long: 1.654 mm, Width: 1.500 mm, High: 1.535 mm, Weight: 1.900 kg

ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...

Central lubrication, oil circulation system, progressive pump, central lubrication unit -Drive motor: Siemens -Pump: 440 V 0.105 kW -Number: 1 x pumps available -Price: per piece -Dimensions: 290/180/H340 mm -Weight: 8.7 kg

GEBR, FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE.

Tool grinding machine, grinding machine, angle grinding machine, rotary steel grinding machine, steel grinding machine -Grinding places: 4 -Angle tables on swing tables: 3 -Angle table for chip breaker groove: 1 -Quantity: 1 piece available -Dimensions: 1210/1210/H1450 mm -Weight: 536 kg

Aspirateur, Grain cleaner, Pre-cleaner, Sieve pre-cleaner used Manufacturer : Eirich Double deck screening machine 2 screening decks with 2 screening surfaces each Sieves 1.5 x 1.75 m Mesh size 1.25 x 2 mm Capacity approx. 40 to 50 t/h Suitable for cereals, rapeseed, corn 6 screen frames available with blower 9158 m³/h Dimensions approx. 2.7 x 1.9 x 2.3 m and blower approx. 1.6 x 1.2 x 1.5 m Changes and errors in the technical data, specifications and prices as well as prior sale.

Gear motor, electric motor, three-phase motor -Speed: 22 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP54 -Construction: B5 angle -Dimensions: 325/240/H155 mm -Weight: 9.8 kg

wire electrode, welding wire, welding wire -Manufacturer: Elga, started roll of inert gas wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300 /105 mm -Weight roll: 5 kg

Wire electrode, welding wire, welding wire -Material: stainless steel -Manufacturer: Eurotrode, started roll of shielding gas wire electrode -Type: M 8820 1.4829 Ø 1.2 mm -Dimensions: Ø 300 / 100 mm -Weight roll: 5.1 kg

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Automatic / Automatic, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Cnc axes nº: 6, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:

Allweiler feed pump type SNF 280 ER46U4-W33 in new condition for sale. Technical data can be found in the attached data sheet.

Rack oven Miwe Rollin eplus RI 1.0610 TXXL 6 pieces - Rotary oven Baking cabinet Miwe Rollin - for 60x100cm sheets - with 2 rack trolleys - with exhaust hood - with gas burner - with ramp - 6 pieces available in stock

Converter, converter, converter, drive converter, controller, inverter -SEW: Movitron Type 355 825074X -Input: E 380-415 V 50 (60) Hz -Output: G 0 ... 460 V 55 A -Temperature: 0-45 °C -Protection class: IP00 -Dimensions: 335/220/H175 mm -Weight: 7.2 kg

EUROMETAL FU-32B universal milling machine was built in 2008 in Poland. The process of precision machining of workpieces is performed on a large work table with a length of 1320 mm and a width of 315 mm using a highly efficient spindle rotating at a maximum speed of 1800 rpm. The total weight of the EUROMETAL FU 32B machine is 2100 kg. Technical data of EUROMETAL FU-32B milling machine - work table dimensions (L x W): 1320 x 315 mm - feed rate in the X/Y axis: 850/235 mm - spindle rotational speed: 1800 rpm - distance between spindle axis and table: 400 mm - spindle drive motor power: 5.5 kW - feed drive motor power: 1.5 kW - dimensions (L x W x H): 2000 x 1474 x 2080 mm - EUROMETAL FU32B machine weight: 2100 kg

Connecting cable, connecting wire, cable line, socket cable, socket line, sensor line -Manufacturer: Murr Elektronik, M8 female 0° free lead end unused original packaging -Type: 7000-08041-2100500 -Mat-No.: Code 47218 -Package dimensions: 220/220/H10 mm -Weight: 0.2 kg

Förderbaänder 16 A 380 V Slow runners Length 90 cm Width 15 cm Height 15 cm

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Stainless steel tank, stainless steel container, silo system, tank, lid, sealing cap -Closure cover: with spring clamp -Price: per piece -Quantity: 11 pieces -Minimum order: 4 pieces -Dimension: Ø 180 x 45 mm -Weight: 0.4 kg/piece

Geared motors SEW TYPE K29DRS71M4BE05/ASE1/TF/AS7W 50 HZ r/min 1360 0.55 KW 380 V IP 54 I 27,23 Nm 105/84 Absolute speed sensor Baumer AK8Y / Ak8W Gearbox output shaft d 25 mm

Line SEW Eurodrive NF 085-503 Part No. 08274150 No.0009405 UN : 3x380V IN: 85 C° Connections 35 mm2

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE 012/PCN 806734 -Connections: 1/2 ODF -Dimension box: 135/95/H50 mm -Weight: 0.3 kg.

Airpower Europe APD 060 090 F05/F07-V14-H MD 7Nm/bar Pneumatic swivel actuator double-acting Valve monitor - Feedback box Model LSB 02-M2 IP 67 230 V Outer D 185 mm Inside D 155 mm Thickness 4 cm Outer steel

pressure: 20 t throat: 185 mm stroke: 100 mm table surface area: 380 x 350 mm dayligth: 250 mm table height over floor: 840 mm total power requirement: 4 kW weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

Transport container winter service, for spreader, salt spreader, salt container, grit container, -Filling device: for road salt, fertilizer, for hand spreader -Bank: made of stainless steel -Transport frame: made of galvanized steel tube -Transport dimensions: 1800/1400/H1265 mm -Weight: 250 kg

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4M+ -Remote control sockets: 4 -Dimensions: 225/110/H45 mm -Weight: 1.0 kg

For vegetable

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Inductive sensor, electronics sensor -High temperature resistant: 230 °C -Cable length: 10 m -Manufacturer designation: Cable socket 10 m -Type: VK A0 69 41 -Number: 16x available -Price: per piece -Weight: 250 g

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

- Eirich RV 19 granulation / mixing plant, mixer, feed hopper, riser plate completely refurbished. Incl. -Steel construction - Screw conveyors - Input silo approx. 30 m3 - Steep conveyor

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

table length: 1500 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,8 t dimensions: 1,5 x 1,5 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power converter, power supply, power supply, switching power supply, power supply module -Input: 3 x 360-520 V AC 50/60 Hz 2.40-1.70 A. -Output: 24 V 40 A DC -Price: per piece -Number: 6 pieces -Dimensions: 140/160/H130 mm -Weight: 3 kg/piece

Capacity/ ◆2500/KGS. Fork width/ ◆540/680mm. Fork length/ ◆1150mm. Wheels/ ◆Nylon / PU / Iron wheels Battery/ ◆12V/120AH Maintenance-free battery Charging method/ ◆External charger The product meets the quality requirements of the EU directive and is CE certified. Wear parts can be reordered from us

Level limit switch, level measuring device, sensor, switch, level transmitter -Pepperl+Fuchs Part No.: 103375 -Dimensions: 130/120/H30 mm -Weight: 0.2 kg