e h used for sale

Height 1750 mm Width 1260 mm Length 2380 mm Power supply: 400V 50Hz 3N Description The machine is adapted to transport shredded dry industrial materials.

Revolver hole punch, with 12 stations, D in mm 35 x 4/47/50.5 x 14/8 x 37/48/ and other punches and dies Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Punching force: 25 t Punching capacity: D 50 in 3.5 mm Sheet thickness: 3 mm Colour: grey Total power requirement :16 A Machine weight: 3500 kg Projection: 700 mm Dimensions: 120 x 80 x 250 mm Punching diameter: 55 mm Machine Number: 18439-464

• Conveying height 1,290 mm • Inlet height 620-780 mm • Tablet diam. 3-25 mm • Deduster path total length 15 m • Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h • 2 inlet adapters: rectangular 115x80 mm and round with diam. 60 mm nozzle • Programme control C920 with HMI Allen-Bradley Panel View Plus 600 • Distributor V4000 with 6 outlets, automatic/manual change of outlets selectable via HMI • Metal check Lock Met 30+ with its own HMI • Bad ejection into glass container • PLC Allen-Bradley MicroLogix • Drive 100-240V/50/60Hz • Nozzle for dust extraction • Mobile

Rexroth D-89275 Elchingen TYP: A4VG125DA2DA/32R-NTF02F071DP MNR: R902198125 SN: 93991682 FD: 23W03 n=2300min P=94,0 kw Made in Germany

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   height above floor level: 700 mm SLIDE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 400 mm/s   working velocity min.: 5 mm/s   working velocity max.: 160 mm/s   return velocity max.: 300 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm   distance between columns (H-frame): 2100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 370 kW   mains voltage: 400 V   mains freq ...

Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Manufacturer: Gruse Maschinenbau, Type: ELS 1-10-6-G-SO, Year: 2013, Lifting power kg: 1000, Length mm: 1500, Width mm: 1000, Lifting hight approx. mm: ca.1000, Total hight mm: 230, Safety strip: yes, Carriage: no, Total power kW: 2,3, Wight approx. kg: 870, CE-Sign: yes, FREE TEXT: Gabelstapler ausparung/Handbedienpaneel, Year :2013

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm

Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120–4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details.

- Filter surface area: 3m2 - Evacuation: manual Equipment : - Control window with inlet and outlet lighting - Circulation pump - Adjustable dosing pump - Agitator - Connection: butterfly valves, Friedrich n°2 40 Dimensions : - Length: 1750 mm - Width: 700 mm - Height: 1000 mm - In working order

! Exhibition Machine Corresponds to the Panhans LLB116 with the following optional accessories: - Single-lever operation with fine locking - Dial gauge in the handwheel for height adjustment SPECIFICATIONS: - Max. drilling depth 145 mm - Max. elongated hole length 240 mm - Height adjustment 135 mm - Motor power 1.3/1.7 kW - Suction nozzle Ø 100 mm - Machine weight 200 kg

workpiece diameter: 600 mm workpiece weight: 400 kg workpiece height: 300 mm total power requirement: 35 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1,5 x 1,78 x 1,3 m ACTION PRICE ! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Sa ...

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 25,4 x 0,9 mm weight of the machine ca.: 0,4 t Dimensions (LxWxH): 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot runner controller - Feller Engineering MCS (2 pcs.) Year of construction: Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker). Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.0kW | compressed air not necessary | max. speed of the machine in neutral: 8 cycles/minute | max. product dimensions (mm): L450xW300xH200 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1380xW690xH1065 | weight (net/gross): 125/175kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note  ...

Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker) with roller conveyor for product out feed. Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.2kW | compressed air not necessary | max. speed of the machine in neutral: 17 cycles/minute | max. product dimensions (mm): L450xW300xH200 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1400xW870xH1080 | weight (net/gross): 150/220kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and add ...

Hammer mill Manufacturer Condux made of stainless steel

Equipment: heatable/coolable, insulation, agitator,Manufacturer: ETA,Condition: used,Volume: 21,940,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Heating/cooling (filter bar): available,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 2,830,Diameter outside: 3,000,Cylindrical height: 3,400,Total height: 5,000,Type plate: Yes,Equipment: Level indicator (without guarantee), Crane eyelets,Outlet: available,outlet : 50,remarks: bottom of the tank and 1/3 of the cylinder temperature-controlled,last use:

Homogenizing Machine Manufacturer: EscoLabor Type EL-3 Year of manufacture 2001

Manuelle Heftmaschine / Manual Stapler Nagel ENAK 50 Serial-No. 7005

Halbautomatischer Stanztiegel / Automatic Platen Die Cutter ETERNA ML 930 GII Year 2008 - Serial-No. EP51568 Format 670 x 930mm Weight 2800kgs Included frame and tools, very good condition

Tool holder Weldon VDI 80 50100 Pieces: 1 60120 pieces: 6 Manufacturer: EWS Type: VDI 80 Country of origin: Germany Price without VAT Piece:

Tool holder Weldon VDI 60 50100 pieces: 5 1090 pieces: 2 4087 pieces: 2 24100 Pieces:1 3090 pieces: 10 2570 pieces: 1 32100 Pieces:1 Manufacturer: EWS Type: VDI 60 Price without VAT Country of origin: Germany

Tool holder Weldon VDI 50 3296 Pieces: 1 25160 pcs: 1 12170 Pieces: 1 40130 Pieces: 1 Manufacturer: EWS Type: VDI 50 Price without VAT Country of origin: Germany

Tool holder Weldon VDI 40 10×80 Pieces: 12 3075 pieces: 2 4190 pieces: 3 4080 Pieces:2 3273 Pieces: 2 1375 Pieces: 12 1875 Pieces: 2 1668 pieces: 4 40120 pieces: 5 3095 pieces: 3 2475 pieces: 2 28/2775 Pieces: 2 1980 pieces: 10 3280 pieces: 5 667 pieces: 10 25150 pieces: 4 1865 pieces: 4 2580 pieces: 1 896 pieces: 1 Manufacturer: EWS Price without VAT Country of origin: Germany Condition: new

Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co.Year of construction approx. 1980Load capacity approx. 5 ton. Platform size 1700 x 1100 mmStroke max. 515 mmOverall height Table bottom with rail rollers 535 mmOverall height Table bottom without rail rollers 480 mmTable height raised with rail rollers max. 1050 mmTable height raised without rail rollers max. 995 mmTravel speed rail chassis approx. 8.5 meters/min. Motor power 4 kWNet connection 400 volts, 50 Hz hand switch for up and down on the cable safety limit switch

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Hydraulic power unit for mobile clinching pliers or mobile former ECKOLD type HA 500 / 2Fabr. No. 737 / 783 Year of construction 1991Hydraulic power unit type HA 500 / 2Operating pressure 50 - 500 bar adjustableFlow rate 2.6 l/minTank capacity 16 litresEngine power (hydraulic) 3 kWNead power 380 Volts, 50 Hz.Control voltage 24 Volts, DC pressure line with screw coupling- With solenoid valve HAWE GS 2-2- mobile on 4 swivel castorsWeight without hydraulic oil 125 kggood condition; used

2-column hydraulic press SELF-MADEBaucy approx. 1980Compressive force 6 ton. at 180 barCompressive force 5 ton. at 150 barCompressive force 4 ton. at 120 barCompressive force 3 ton. at 90 barTable top 400 x 340 x 30 mmPlunger plate 410 x 350 x 28.5 mmTable usable area between the guide columns 305 x 245 mmPlunger stroke 140 mmInstallation height max. 320 mmColumn diameter 35 mmTable height above floor 1050 mmHydraulic operating pressure max.180 barMotor power 4 kWNet connection 380 volts, 50 Hz- stepless

Tool holder combination holder for internal and external cooling VDI 40 Ø 25120/Ø4090/Ø3670 Cantilever length (LPR) 145.00 mm Function Length (LF) 120.00 mm Functional width (WF) 42.50 mm Pick-up diameter, min. (DCONN) 25.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI40 Interface size Ø 25.0 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system (block) Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-4025lctxdi-kombih-f-i nner-u-ausauskuehlung-bore-25-mm-long-ausfäehrung-differential-verste llung-differentialialverstellung-/103300 Pcs:7/74/4

Tool holder combination holder for internal and external cooling VDI 25 Ø 25 mm/ Ø32mm Manufacturer: EWS Country of origin: Germany Shaft size VDI25 Cantilever length (LPR) 95.00 mm Functional length (LF) 70.00 mm Functional width (WF) 30.00 mm Mounting diameter, min. (DCONN) 25.40 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Interface size Ø 1" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website: ews-tools.de/de-DE/product/ews-17-2525-4mft-kombih-f-innen-u-aussenkue hlung-bohrungs-25-4-mm-1-/66355 Condition: New

Tool holder combination holder for internal and external cooling VDI 50 Ø 4085125 Cantilever length (LPR) 125.00 mm Functional length (LF) 85.00 mm Functional width (WF) 42.50 mm Mounting diameter, min. (DCONN) 40.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI50 Interface size Ø 40.0 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system (block) Price without VAT Pieces:4

Tool holder combination holder for internal and external cooling VDI 60 Ø 50200235 17.6050.8S670 Cantilever length (LPR) 235.00 mm Function Length (LF) 200.00 mm Functional width (WF) 62.50 mm Mounting diameter, min. (DCONN) 50.80 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI60 Interface size Ø 2" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-6050-8s670-kombih-f-i nnen-u-ausauskuehlung-durchmesser-50-8-mm-2-/68694 Pieces:4

Tool holder VDI 30 longitudinal holder Interface size square 20x20 4.3020DSS left Cantilever length (LPR) 60.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 22.00 mm Clamping length, max. (LSCX) 60.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-4-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c2-links-/69246 Condition: New

Tool holder VDI 30 longitudinal holder Interface size square 20x20 2.3020DSS right overhead Cantilever length (LPR) 70.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 23.20 mm Clamping length, max. (LSCX) 70.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-2-3020dss-langengsaufnah me-stahlhoehe-20-din-69-880-form-c3-right-overhead-/69572 Condition: New

Tool holder VDI 30 longitudinal holder Interface size square 20x20 right 1.3020DSS Cantilever length (LPR) 75.00 mm Functional length (LF) 0.00 mm Operating Height (HF) 19.05 mm Functional width (WF) 60.00 mm Clamping length, max. (LSCX) 75.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-1-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c3-rechts-ueberkopf-/68760 Price without VAT

Tool holder boring rod holder VDI 40 36×95/1676/2596/2895/2295 Manufacturer: EWS Type: VDI 40 Bar diameter: 36/16/25/28/22 Bet Height: 95/76/96/95 Price without VAT Country of origin: Germany Condition: new Pieces: 2/8/7/1/1