e h used for sale

Bending length: 4200 mm pre-bending: 34 mm Bending strength: 38 mm power capacity: kW Number of rollers: 4 Stk Adjustable rollers: Stk diameter of upper rolls: 540 mm diameter of lower rolls: 500 mm side roll diameter: 365 mm work speed: 0 - 8 m/min total power requirement: 55 kW weight of the machine ca.: 35 t Control: Haeusler Bendtronic 2.0 dimensions of the machine ca.: 7.5 x 2.1 x 2.4 m Equipped with: - Haeusler BENDtronic 2.0 control system - Smallest possible bending diameter with upper roller Ø540mm: 595mm (depending on springback) - Roller bearings: Self-adjusting roller bearings - Max. cylinder force against upper roller: 3,245kN - Roller material: 42CrMo4 (1.7225) - Speed compensation between upper and lower roller: automatic when the two-roller drive option is selected - Roller adjustment: hydraulic - Tilting of the lower roller and both side rollers for cone bending: infini ...

General SKU299T699 MakeEllerwerk (Rebuild by Heinkel) Type937H No.80.065/09.81.003 Year of construction1981/ ( rebuild 2010) LocationBarneveld Main Features MaterialHastelloy Motor22 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity210 Ltr. Basket sizes1050x500 mm Wall thickness12 mm Max. loading weight230 kg Motor45.0 kW, 400/690 Volt, 1480 rpm.( EX) Max. basket speed1400 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor0,75 kW, 230/400 Volt, 1430 rpm (EX) InletDN 80, DN32 Solids outletDN 200 Liquid outletDN 150 MaterialStainless steel 2.4602 (Hastelloy C-22), Stainless steel 2.4610 (Hastelloy C-22) Information Mounted on foundation platecheck Floorspace3,85x1,9 m Total height1,8 m Weight± 10000 kg CEcheck ATEX compatiblecheck Extra SpecificationsThis Ellerwerk was completely overhauled by Heinkel in  ...

CNC machining center Type: Evolution 7405 Manufacturer: Holz-Her Year: 2014 Minimum workpiece dimensions: X: 200 mm Y: 70 mm Z (thickness): 8 mm Maximum workpiece dimensions: X: 3,200 mm Y: 920 mm Z (thickness): 70 mm Main milling spindle: 6.5 kW (type S6-40), air-cooled, with HSK-F63 clamping. Drilling unit: 1.7 kW, 15 drilling spindles. Tool change: 6-position (6-fold) magazine, pneumatic tool changer. Edge + surface machining possible → 4-sided milling/profiling Machine in good condition, fully functional, under power Find more here - / Contact us at -

Size: 55 x 28 cm (21 x 11 inch) Equipments: Good condition without any damage two stitchings heads 52/8 Maximum staple thickness of 8 mm

control: 840D-PCU 50 V1 : 3 coolant: ja chip conveyor: ja kW generator - rated current: 110 A connected load: 56 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 200 mm stroke: 100 mm dayligth: 308 mm ajustment speed: 150 mm/sec working feed: 1-10 mm/sec return speed: 100 mm/sec table width: 100 mm table height: 900 mm control: DNC 60 PS oil volume: 100 l voltage: 400 V total power requirement: 5.5 kW weight of the machine ca.: 2750 kg Equipment: - CNC electro-hydraulic press brake - CYBELEC DNC 60 PS CNC control Swiveling control panel, front left Tool & program library - CNC electro-motorized backgauge (X-axis) X-axis travel = 800 mm 2x manually adjustable backgauge fingers (R+Z axes) Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system A with quick-change clamping Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms (Sliding System) - BOSCH/HOERBI ...

💥 You need load capacity, height and safety †right now? This complete set gives you exactly that: 3 full Hünnebeck ID 15 steel frame towers , approx. 5.50 m high, including all components and H20 brackets for a safe top working platform. 🟨 Perfect for your next construction site: Whether youre doing slab formwork, beam support or heavy-duty shoring †these used shoring towers are strong, modular and always expandable. 🟨 Fast setup: Few basic parts, easy handling, no tool chaos. Two workers? Enough. 🟨 Platform included: H20 console included †so youre safe even at the top. No extra parts needed. 🟨 Smart for your stock: Once secured, always flexible. Combine, stack or expand these scaffold towers as needed. 🟨 Need more? Just ask: Larger quantities of used Hünnebeck ID 15 components are availa ...

TBVE (TVE-ESCALE) ESCALE – Three Bath Open Width Washer Model: High Efficiency Washing Range (Washing Range – ESCALE) Manufacturer: TVE-ESCALE (TBVE Group) Year of manufacture: 2023 Condition: Good, fully operational Configuration: 3-bath open width washer with 3 evacuation (vacuum) slots – one per scour bath Documentation: Manual available Status: Available for sale Three heated wash bays, counter flow, working width of 2800mm fabric specs of 100gsm – 400 gsm (can be used on heavier cloth successfully) all plc controlled with three evac slots (one on each wash bay) input from roll or plated, output plated. --------------------------------------------------------------- Machine Description The TVE-ESCALE High Efficiency Washing Range is an industrial open-width textile washer designed for high-quality washing, scouring, and bleaching of fabrics. The system combines bath ...

A 2-station party keg filler small keg filler Esau & Hüber is available. Filling capacity: 300/h, keg size: 5l, filling positions: 2. An on-site inspection is possible.

For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.

- Rack oven for 2 jumbo trolleys - Manufacturer: Hein Backofenbau GmbH - Type Ecostone LR1 8125D - With oil burner - Electrical connected load: 5 kW - 400 Volt 3ph 50Hz - Nominal heat output 145kW - Year of construction 07 / 2017

Key data: 50 KW, 80 kVA, 400 V

SES Gas CHP HPC 50N (MAN E0834 E302) Gas electricity and heat generator from 2014 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: SES Model: HPC 50N Type: Gas CHP Engine: MAN E0834 E302 Serial Number: F14283 5/5 Power [KW]: 54 Power [KWel]: 50 Year of Make: 2014 Operating hours: unknown Weight unit [kg]: 2,300 Dimensions LxWxH [m]: 3.6 x 1.0 x 1.5 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 314428/5 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2014

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless Steel Finish Ulma Etna Model HT280 Capable of 80 packs per minute Touchscreen for quick adjustments Can do clear or coloured film print reg In excellent condition Ideal for food and many other applications

used flow meter, from plant dismantling, DN 40,

28.8m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 28800 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 8 Number of levels: 4 (6 trusses + floor parking space) Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 9 x Stand 6000 x 1100 mm Bay Load 20000 kg blue 48 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

25.2m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 4 (6 trusses + floor parking space) Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 42 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

21.6m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 21600 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 6 Number of levels: 4 (6 trusses + floor parking space) Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 7 x stand 6000 x 1100 mm bay load 20000 kg blue 36 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

18m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 18000 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 5 Number of levels: 4 (6 trusses + floor parking space) Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 6 x stand 6000 x 1100 mm bay load 20000 kg blue 30 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

14.4m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 14400 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 4 Number of levels: 4 (6 trusses + floor parking space) Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 5 x stand 6000 x 1100 mm bay load 20000 kg blue 24 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

7.2m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 7200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 2 Number of levels: 4 (6 trusses + floor parking space) Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 3 x stand 6000 x 1100 mm bay load 20000 kg blue 12 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

Professional Holzprofi Maker edge belt sander with pivoting grinding device up to 90°, height adjustable cast iron table, mitre gauge adjustable at both sides, graphit band rest, rubberized grinding cylinder, cast iron table for round grinding is included in the price. Technical Data: Engine power 2,2 kW Grinding cylinder support Ø 38, 50, 76 mm Voltage 400V Table length 900 mm Table width 300 mm Table height adjustable ca. 905 - 1027 mm Band length 2770 mm Belt speed 16m/sec Weight 225kg

REF-2476 ULMA ETNA HITECH VERTICAL FORM-FILL-SEAL MACHINE Vertical form-fill-seal machine (VFFS) Manufacturer: ULMA Model: ETNA HITECH 280X Machine no.: 60281145 Year: 2009 Power: 7kW Voltage: 400V Overall dimensions: width 150 cm, length 220 cm, height 200 cm.

This HARDINGE EMAG VL 5 was manufactured in 2001. It features a Fanuc Series 21i-T control, a chuck diameter of 260 mm, and a maximum turning diameter of 220 mm. The spindle can reach speeds up to 4,500 rpm, and it includes a 12-piece automatic tool changer. Ideal for precise vertical turning operations. Contact us for more information.

This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us.

This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information.

This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine.

This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine.

EMCO Hyperturn 45 - CNC lathe - Main spindle equipped with full-clamping cylinder (operation with bar feeder not possible or loading and unloading via automatic. Swivel loader, see video) - Year of construction 2011 Technical data Working Range: - Maximum circumferential diameter over bed: 430 mm - Circumferential diameter over face slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar passage: 45 mm - Distance main spindle - counter spindle (spindle lugs): 720 mm Carriage travel range: - Carriage travel X / X2: 160 / 150 mm - Carriage travel Z / Z2 / Z3: 510 / 510 / 510 mm Main spindle (spindle 1): - Spindle connection - DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (inner diameter): 85 mm - Maximum mass inertia for clamping device and workpiece: 0.08 kgm² Main spindle clamping system: - Hollow clamping cylinder ...

This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre.

General SKU430W1394 MakeHermann Waldner LocationBarneveld CEcheck Type46 l. Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity46 l.( 20l) Vessel sizesDia. 450x500 mm Dished bottomcheck ManholeDia. 400 mm Top connectionscheck OutletDN40 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1500 rpm Speed mixing shaft45-55 rpm Information No.5069 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,75x0,90 m Total height2,10 m Weight300 kg Extra Specifications- control panel on the reactor (Plug &: Play) - mirror polishe ...

This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information.

General SKU430W1392 MakeHermann Waldner LocationBarneveld CEcheck Type238 l Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity238 l. (150l) Vessel sizesDia. 750x800 mm Dished bottomcheck Top connectionscheck OutletDN50 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft130-140 rpm Information No.5066 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,93x0,96 m Total height1,80 m Weight500 kg Extra Specifications- control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHermann Waldner ...

This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine.

General SKU397X1124 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature0 — 200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.5714.02-07 Year of construction2007 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKU397X1125 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.559602 Year of construction2000 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

This 5-axis OPS INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain Control TNC 640, a high-frequency spindle with a speed range up to 42,000 rpm, and a 32-slot HSK-E40 tool changer. The machine offers a traversing speed of 30m/min and traversing paths of 550x400x400 mm. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL High Speed Eagle V5 machine we have for sale. Contact us for more information.

Qty. 1 Second-hand complete Copper Strip Production Plant Mfc.: Shinkwang Tech, Waterburry Farrel, Rozai, Handuck, Mirae, Wuishi, Youngchang, Sundwig, Sonoda Eng., Wuxi Longar Mach., Backsan Mach., Deakwang Mach., Hankug Eng., Intrize, Samjung Built: 1960 – 2020 Material Width: 650 mm Thickness Entry: 12 mm Exit: 0.05 mm Consist of: Break Down Mill Intermediate Mill Finishing Mill Annealing Coil Built-Up Line Roll Grinder Pickling Degreasing Buffing Tension Leveller Slitters (3) Precious Slitter Drum Cutters (2) Scrap Shears (2) Cut-to-length (2) Packing Machine Draw Bench Machine

General SKU430W1391 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity687 l., (500 l.) Vessel sizesDia. 1000x1200 mm Dished bottomcheck ManholeDN350 Top connectionscheck OutletDN25 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft95-136 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information No.5065 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace1,30x1,30 m Total height2,40 m Weight1100 kg Extra Specifications- with control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHerma ...

General SKU357W963 MakeJ. Engelsmann AG TypeRRM 1100 SA No.6820/1.4541 Year of construction2003 LocationBarneveld Main Features MaterialStainless steel Volume180 Ltr. Motor0.55 KW Specified Features - Tumbler mixer Tumbler mixercheck Barrel mixercheck With motor0.55 kW, 230 V, 1360 rpm Speed mixer23 rpm With safety gatescheck MaterialStainless steel 1.4541 (321) Information Mounted on stainl. steel framecheck With switchcheck Floorspace1.40 x 1.45 m Total height1.40 m Weight200 kg Extra SpecificationsTumbler mixer, completely build in stainless steel. Comes with a 30 l barrel but also suitable for bigger capacity barrels. With safety case and easily moved my manual trolley, which is also included. :Tumbler mixersEngelsmannMixers > Tumbler mixersBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information.

This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 920x380 mm, with an impressive spindle speed of up to 35,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details.

This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information.

General SKU201P083 MakeESCHER WYSS TypeH100 No.2652 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Motor37 KW Inlet diameter1000 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity180 Ltr Basket sizesdia.1000mm x600mm Max. loading weight232 Kg Hydraulic drivecheck With hydraulic unitcheck Motor+/- 37 kW, 380 Volt With variable speed drivecheck Max. basket speed1530 rpm With hydraulic unitcheck Motor0,75 kW Inletdia.155mm Solids outlet200x200 mm (screw) Liquid outlet440x185 mm MaterialStainless steel Information Mounted on foundation platecheck Floorspace3,4x1,6 m Total height2,3 m Weight3600 kgPeeling centrifugesEscher WyssCentrifuges > Peeling centrifugesBrand > Escher Wyss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping  ...

General SKU254S227 MakeElmess (D) LocationBarneveld CEcheck TypeDHG01B03St/SE-4 Flow heater Pressure Working pressure2 Bar Main Features Heating (medium)Electric Capacity8 KW Temp.820 °C Specified Features - Temperature control unit MaterialStainless steel 1.4541 (321) Temperature control units Horizontalflow heater Number of tubes:1 Tube diameter76,1mm Tube length900mm Wall thickness tubes2,9mm Max. temperature-10/550...820 degr. C Shell diameter219 mm Temperating machineflow heater Gas heatingcheck Electric capacity4 kW 230 Volt (2x) Temperature-10/550...820 degr. C With temperature controllercheck Information No.826280/001 and 826280/002 Mach.No.826280/001 and 826280/002 Year of construction2016 With switchgear(as is) Floorspace1,6x0,9 M Total height1,2 M Weight700 Kg Extra SpecificationsUNUSEDTemperature control unitsElmessHeat exchangers > Temper ...

General SKU300P746 MakeHet Stempel BV (NL) TypeUnknown Year of construction2013 Mounted on framecheck Main Features MaterialStainless steel Motor4 KW Specified Features - Colloid mill MaterialStainless steel Emulsifiercheck Rotor sizesplate dia.200mm Outletdia.14mm Motor(2x) 4,0 KW, 380 Volt With variable speed drive/ inverter Information LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace0,9x0,6 M Total height1,5 M Weight230 KG CEcheckColloid millsHet StempelMills > Colloid millsBrand > Het Stempel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR1268 MakeHermann Linden Maschinenfabrik (D) LocationBarneveld CEcheck TypeLPM 1 EWD Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume0.75 Ltr. Motor3 KW Specified Features - Planetary mixer Planetary mixercheck 2 Mixing/kneading shaftscheck Motor3 kW 400 Volt With covercheck Capacity0.75 ltr Pan sizesdia. 100x100mm MaterialStainless steel Information No.2061 Year of construction2006 With switchgearcheck Floor space1,2x0,6 M Total height2,1 M Weight500 Kg Extra Specificationselectrically operated lifting Planetary mixersHermann LindenMixers > Planetary mixersBrand > Hermann Linden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKUR1272 MakeHermann Linden Maschinenfabrik (D) LocationBarneveld TypeLPM 1 EWD Main Features MaterialStainless steel Volume0.75 Ltr. Motor0.37 KW Specified Features - Planetary mixer MaterialStainless steel Planetary mixercheck 2 Mixing/kneading shaftscheck With scrapercheck Motor0,37 kW 220-240/380-415 volt Speed mixing/kneading arms88 rpm With covercheck With pancheck Capacity0.75 ltr. Pan sizesdia. 100x100mm With jacketcheck Information No.1811 Year of construction1997 With switchcheck Floor space0,6x0,3 M Total height0,9 M Weight75 KgPlanetary mixersHermann LindenMixers > Planetary mixersBrand > Hermann Linden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit ...

General SKU430W1389 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity150 l Vessel sizesDia. 700 x 800 mm Dished bottomcheck Top connectionscheck OutletDN25 With jacketcheck Max. temperature200°C With propellor stirrercheck Motor0,37 kW (400 V, 1500 rpm) Speed mixing shaft85 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information No.5067 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,95x0,90 m Total height1,80 m Weight600 kg Extra Specifications- Mirror polished inside Stainless Steel ReactorsHermann WaldnerReactors > Stainless Steel ReactorsBrand > He ...

General SKU101Y726 MakeHändle TypeEDR 21-A No.PZ-3445 Year of construction2000 LocationBarneveld Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder MaterialStainless steel Double screw extruders Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) Information Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Sieve plate housing is missing - Max. pressure 20 bar DiscountDouble screw extrudersHaendleDiscountExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...