128,681 used machines on RESALE, but how to find them? Machine Search
Pedestrian pallet truck, Still, EXU16, 1.6 to. –used-: Price ex location: only 2.750.-€ (net). Manufacturer: Still Type: EXU16 Year of Make: 2017 Operating hours: approx. 935.6 Nominal load capacity: 1,600kg Leeward weight: 265kg Battery: 24V Weight approx. 151kg Condition: good Available: immediately Location: 88448 Attenweiler
Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -
A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.
spindle turning speed range: 750/1500 U/min total power requirement: 2,5 kW turning speeds: 750-1500 U/min thread cutting attachment: tool adaptor: MK4 table surface area: 320x240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type: ER600 Serial number: 109 Belt width: 600 mm Belt speed: 1.5 - 15 m/min Filling level: minimal 15 litres Power: 3 x 380V, 50Hz, 0.61kW Dimensions: 1400 x 900 x 1750 mm Weight: 145 kg Fully overhauled, including new controls.
3-axis machining centre with automatic tool changer for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Speed infinitely variable up to 21,000 rpm Manual control unit Minimum quantity spraying Automatic tool change with magazine (4 places plus angle head) Tensioner detection and clamp displacement 4 pneumatic material clamps light barrier Weight: approx. 2,000 kg
Key data: 3 mm, 1050 mm
Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T
Back finishing with NAGEL SP PLUS SQUARE PRESS. Flat, rectangular pressing of the booklet spine by means of a special pressing system Max. number of sheets of the brochure up to 30 sheets (80 g/m² paper) Max. power (set/hour) for single pass 1600 hours Double pass 1400 hours Booklet sizes min.(mm) 70 x 105 Booklet sizes max.(mm) 350 x 250 Power supply (V) 230 Volt Net weight (kg) 100 Gross weight (kg) 120
Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.
Height=2.3 m, Overall length= 2.06 m, Overall width= 1.2 m, Net weight= 818 kg,
Dimensions (L/W/H): 1480x760x1160 mm Weight: 180 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4000x2900x2100 mm Weight: 2500 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5000x2900x2100 mm Weight: 2900 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4000x2300x2100 mm Weight: 2300 kg Total power requirement: 21 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 65 kg Total power requirement: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 815x740x1140 mm Weight: 232 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3000x3000x1650 mm Weight: 850 kg Total power requirement: 16 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 7000x2900x2100 mm Weight: 4900 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 6000x2900x2100 mm Weight: 4500 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting length: 3200 mm Cutting height: 1600 mm Motor output: 1,3 kW Dimensions (L/W/H): 4000x1500x2000 mm machine weight ab.: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1050x1050x110 mm Weight: 350 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1000x740x1260 mm Weight: 240 kg Total power requirement: 2,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2040x1495x1025 mm Weight: 540 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3300x2250x2100 mm Weight: 2000 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1680x930x1200 mm Weight: 350 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1820x585x1450 mm Weight: 500 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1980x1390x1240 mm Weight: 400 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2120x1585x1025 mm Weight: 560 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3800x2300x2100 mm Weight: 1900 kg Total power requirement: 13 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1470x810x1120 mm Weight: 250 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter - cutter special: 30 mm draw-in arbor diameter: 40 mm clamping height: 310 mm circle diameter: 80-300 mm weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 61 kg Total power requirement: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3300x2100x2100 mm Weight: 1500 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
• Brand: EUREC, • Model: Z85, • Type: Double-shaft crusher on tracks, • Year of construction: 1999, • Availability: immediately, Weight: approx. 32 tonnes, • Shredder mouth width: 2.30 m, • Shredder mouth length: 1.80 m, • Shaft length: 1.85 m, • Hopper length: 5.40 m, • Hopper width: 2.50 m
Key data: 340 mm, 2000 mm
Emco Emcomat E-300 2-Axis Teach-In/Cycle-Controlled CNC Lathe CNC control Fagor 8055 i Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2,500 rpm X-axis travel 310 mm Travel Z-axis 2000 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
dimensions of saw-band: 2950x27x0,9 mm : 15-100 m/min : 285 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 2,2 kW Weight: 990 kg Overall size: 2500x2230x2050 mm Accessories / equipment: - Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
EBA Multicut 10/550 Year: 1992 550 mm cutting width digital read out (display not working) hydraulic adjustable clamp & cut
Used AVE - Technologies UNIBLOCCO MLK EFS/ESL 12/12/1 filling machine. New: 2006. AVE-Technologies EFS electronic filling systems are based on high-precision technology, guaranteeing high accuracy and high efficiency at all stages of operation. EFS filling machines are suitable for non-carbonated products such as water, fruit juices and nectars, milk, spirits, oils and food sauces in plastic and glass bottles. The set includes a labelling machine and a cap lift.
2 x Audion Elektro Sealboy working width 26 cm one of them has a knife to cut the foil for working with tube foil from the roll 1 x tube foil 250 mm width
used
Key data: 3500 kN, 70 mm
DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm
Travel X/Y/Z: 800mm/500mm/200mm, table dimensions X/Y: 1400mm/300mm, feed rate: 2m/min, quill stroke: 200mm, spindle taper: SK40. Machine dimensions X/Y/Z: approx. 2100mm/2300mm/2600mm, weight: approx. 2100kg. An inspection on site is possible.
🛒 Dokamatic table grille in individual parts | ½ truckload or 40 container Our offer on the Form-on Marketplace is as individual as your requirements! ✨ And this is what you get: individual parts for 24 pcs. Dokamatic table grille 2.00x4.00m maximum optimization of transport costs thanks to space-saving loading the required returnable container is already included in the total price 🚚 Now theres just one question: Whats the quickest way to get your table grills? If required, we will be happy to ask for you about the transportation costs incurred or you can simply and easily collect your material yourself. Price: from € 8920,00 / Gesamtpaket (excl. VAT).Price valid: per total quantity Partial quantity: not possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Use ...
Frami †the perfect choice for your construction project! Are you looking for durable and robust formwork elements to support your construction project? Our Doka Frami Xlife elements in 2.70 m and 3.00 m heights offer exactly what you need †with easy handling and versatile applications. 🛠 Durable & reusable †thanks to the robust Xlife coating ⚡ Light & efficient †for quick and easy processing 🔁 Versatile †ideal for various construction projects Order now and benefit from proven quality! 🚀 📞 Good to know: The right accessories are also available directly from Form-on . Feel free to contact us by phone or email for further details! 🔍 Classification: Unchecked, with strong signs of use and concrete residues, but repairable and suitable for simple applications. Price: from € 116,00 / PCS (excl. VAT). Partial ...
Frami †the smart choice for your construction project! 🔧 Are you looking for robust formwork elements to support your construction project? Then youve come to the right place! Our Doka Frami Xlife elements in 2.70 m and 3.00 m heights impress with durability, easy handling, and flexible application options. 🏗ï¸ ✔ Reusable †the durable Xlife coating ensures a long service life ✔ Lightweight & efficient †for quick and easy processing ✔ Versatile †ideal for various construction projects Order now and benefit from proven quality! 💪 📌 Good to know: The right accessories are also available directly from Form-on . Feel free to contact us by phone or email for more information! 🔍 Classification: Shows signs of use but is suitable for simple applications. Price: from € 118,00 / PCS (excl. VAT). Partial qu ...
Framax Element 2.70 m †Compact, Strong & Efficient! ✨ Need a handy formwork panel that still delivers top performance? Then our Framax Element 2.70 m is the perfect choice! 🚀 ✔ Lightweight & durable †thanks to a powder-coated aluminum frame ✔ Fast connections †integrated locking system & continuous groove for easy handling 🔁 ✔ Long-lasting & resilient †Xlife Framax panel, screwed from the back ✔ Maximum flexibility †ideal for various applications on-site Compact power for efficient work ! 🔥 Get your Framax Element 2.70 m now at Form-on! 🛒🚧 Price: from € 170,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 1-star Serviced & limited ready to use. Uncleaned condition. Heavily used formwork & scaffo ...
Framax Element 3.30 m †Power Without Compromise! 💪🔩 Looking for a high-performance formwork element that boosts efficiency on-site? Then our Framax Element 3.30 m is exactly what you need! 🚀 ✔ Strong & durable †thanks to a galvanized and powder-coated steel frame ✔ Quick assembly †only 2 ties needed for a concreting height of up to 3.15 m! 🔁 ✔ Smart design †with an integrated locking system & continuous groove for easy connections ✔ Xlife Framax panel †screwed from the back for extra durability Wall heights up to 3.30 m †no extensions needed! 🎯 Sounds good? Get your Framax Element now at Form-on! 🛒✨ Price: from € 252,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 1-star Serviced & limited ready to use. Uncleaned condition. ...
In this package we offer the new Framax Xlife Plus upgrade with a panel height of 3.30 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨⚙🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 190,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Non-classified Formwork & scaffolding in uninspected or non-operational condition, but possible to recondition. Therefore the products are not suitable for any applications due to the lack o ...
In this package we offer the new Framax Xlife Plus upgrade with a panel height of 3.30 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨⚙🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 252,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 1-star Serviced & limited ready to use. Uncleaned condition. Heavily used formwork & scaffolding, suitable for minor requirements. 15 x Framax Xlife plus panel C 1 ...
maximum number of results exceeded
please refine your search
