e h used for sale

Year: 2019 - technically efficient, ready to work – after full service - working length: 3500 mm - adjustable leg height - roller width: 240 mm

EBO 68 - 320 IS 600 Electrical deck Oven with 4 decks and proofer Dimensions: 4 x 60x80cm For 2 plates 60x40cm The Oven is complete stainless steel Easy to clean Power of 1 deck: 4.85kW Voltage: 400V / 50Hz / 3/N/PE

Dough dividing and rounding machine ERIKA RECORD, type: Automatic machine No.3 -Refurbished- - For precise dividing and rounding of a wide variety of dough types - Fully automated workflow - Machine parts in oil bath (no lubrication necessary) - Machine head can be tilted, for better cleaning - Dough-friendly operation - Easy to use - Stainless steel side plates - Number of divisions: 30 pieces - Body size: No. 3 - Dough weight: 30 - 100 g - Capacity: approx. 10,000 dough pieces/h The machine has been completely overhauled and is in excellent condition.

Max. punching force: 100 kN Max. stroke: approx. 50 mm (adjustable via clamping lever) Stroke actuation via footswitch Weight: approx. 600 kg

Injection moulding machine for PET preforms

Clamping Force: 200 ton

Clamping Force: 420 ton // Shot Weight (Max): 1555 g

Materials: LDPE, LLDPE, m-LLDPE, MDPE, HDPE, EVA, EVOH, Nylon 6, Co-Nylon, PLA // Film Width (Max): 2800 mm

Screw Diameter: 160 mm // Output Capacity: 1400 kg/h

Screw Diameter: 100 mm // Output Capacity: 600 kg/h

Output: 18000 U/h

Output: 18000 U/h

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm   opening in bed (diameter): 40 mm SLIDE   table surface (left-right): 410 mm   table surface (front-back): 280 mm   stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm   distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible.

Emmegi under-table cross-cut saw with automatic stop Type: Calvet 300 M saw blade coming from below max. saw blade diameter 300 mm with automatic stop – Fence pushes the clippings onto the the cutting position right long table with automatically movable stop left long roller conveyor Weight approx. 500 kg with stop table and roller conveyor

Key data: 1451 KW, 1500 1/min

Complete CHP packge, contenarized unit includes: - Gas engine, generator, genset controller, gas train - lube oil module - ventilation - exhaust gas heat exchanger - GCB, - 0,4/20KV transformer -auxiliaries contorler

Properties: Length 800 mm Width 330 mm Total height 770 mm Weight 22.4 kg Manufacturer ELMOR MORATTO - Italy Speed 905 min ̄¹ Installed engine power 1.85 kW Series: 03-13-5620.004 Connections: Input: DN 50 Output: DN 50

Manufacturer: EuRec Model: Z45E/60 Year of Manufacture: 1997 Power: 160 kW Operating Hours: 34,427 h Find more here - / Contact us at -

Inv. Num. : 8788 Type: TKS070. ECZVO Producer: HV VMD GRYGOV Created: 2016 Parameters: Power consumption: 73 kW Maximum temperature: 450 C Weight: 2100 kg

Key data: 600 mm, 375 mm

ELB Optimal 6375 SPS, year of construction 1995, grinding area 600 x 375 mm, the machine has been overhauled by us currently, the guide tracks are scraped in tolerance of a new machine, the bearings of the grinding spindle have been changed, accessories: Electric Perm magnetic clamping plate 600 x 350 mm, automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter. The machine is functionally tested and can be viewed at our premises under power, we are also happy to take over the installation and training on site, as well as the service in the future

Pero Washing Machine Technical data see in the VBilder

Vertical mixer, 8000 lt., Power 11 kw, Year 2004

grinding length: 600 mm grinding width: 400 mm workpiece height: 500 mm total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 hydraulic double-column press (11), manufacturer: Exner, type EX100SBZR, built in 1988, power 42 kW, pressing force 1,000 kN, GG 11 Exner, type EX100SBZR, built in 1988, SN 10094, power 42 kW, pressing force 1,000 kN, GG 11,000 kg, overtravel 26 mm, table size approx. 900 x 1,100 mm, swivel chair, separate control panel, control system, manufacturer Siemens, touch panel, two-hand operation, manufacturer Sick, type XY2SB, front material feed, linear travel, approx. 1,000 mm Find more here - / Contact us at -

1 press system, manufacturer Exner, type EXSBZRD 500/100, built in 2002, drive power 121 kW, pressing force 5,000 kN, overhauled in 2018, stroke length max. 600 mm, working speed max. 16/30 mm/s, machine weight 82,000 kg, table size approx. 1,000 x 3,000 mm, control system, manufacturer Siemens, type Simatic Multipanel, separate two-hand control, upstream light barrier, manufacturer Sick, separate control panel, manufacturer Rittal, control system, manufacturer Siemens, type OP17, feed unit, manufacturer AMT, type WV400/160, year of manufacture 2008,control panel, control unit, manufacturer Rexrodt, separate switch cabinet system, additional transfer unit/material feed, vertical material buffer, 6-fold feed-through unit, oiling, manufacturer Ratiol/Stöber Find more here - / Contact us at -

1 hydraulic double-column press, manufactured by Exner, type EX80SB, built in 1987, power 15 kW, pressing force 800 kN, GG 5,300 kg, overtravel 38 mm Find more here - / Contact us at -

COMPLETE SYSTEM SEGEM ERT110.5 5 KNIVES DURCHLASS110CM

length: 2000 mm width: 1000 mm height over floor: 1000 mm total power requirement: 0 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 31,51,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Model: Thermo Electron TPF 340 SV Temperature range: down to -40 °C Mains operation: 230 V, 3.5 A, 50 Hz, 0.8 kW Refrigerant: R404a, 0.7 kg Protection class: IP 20 Equipment: Robust design for professional use Digital temperature control with display Several sturdy stainless steel drawers in the interior for efficient storage Lock to secure the contents Ideal for samples, reagents, sensitive materials or food Condition: Used, in working condition With slight signs of wear (see pictures) Interior clean, stainless steel drawers available

Ref. no.: 18643 Manufacturer: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requ ...

Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

The following used CNC vertical lathe EMAG VL2 is for sale. Manufacturer: EMAG Type: VL2 Year of Make: 2014 Weight: 6000 kg Description: It is a reliable EMAG VL2 CNC vertical lathe, ideal for precision machining of small and medium-sized parts. The machine is in good technical condition, has been regularly serviced and is ready for immediate use. The machine is suitable for both one-off and series production.

Key data: 900 mm, 500 mm, 500 mm

Offered here is a machining center from the manufacturer Emco Famup with 4th axis with tailstock. The machine is freely loaded onto trucks. Make: Emco Famup Type: EmcoMill E900 Year of Make: 2008 Control: Siemens Sinumerik 810D - ShopMill Specifications: Travel distances X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 3600.001° Fpjc Ha Isxrvrdoh U Hop Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12000 rpm Spindle power: 13 kW Coolant supply through the spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 tons Dimensions: approx. 4000x2400x2900 mm

From a current recycling we offer you various bakery furnishings including baking proofer, bread slicer, freezer, stainless steel sink. Year of manufacture: various (including 2014/2015) First registration: / Condition: used. Functionality cannot be guaranteed Hours: / Asking price: 5.000,00 Euro VHB Factory Price: Equipment / accessories / other information: Back proofer, 15 chairs, bread slicer, stainless steel sink, freezer, filter proofer, POS system screen, cream climate cabinet Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 63607 Wächtersbach The sale is without warranty Subject to prior sale

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 3,100 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 Operating System Minimum Quantity Spraying Tensioner detection and automatic displacement 6 pneumatic material clamps 2 material stops Loading is included in the price

1 BABCOCK stenter for woven, roller width 340 cm, working width 320 cm, year 1995, 4 ECON-AIR chambers updated brand new in 2004, gas heated with MAXON burners, horizontal pin and clip chain, J-box entry, foulard, MAHLO weft streightener type RFMC 10-A from year 2001, cooling field, plaiter exit

1 EFI REGGIANI MEZZERA continuous bleaching and scouring instalation, year 2020, commissioned 2021 (only 4800 working hours), roller width 2000 mm, working width 1800 mm, minimal working width 900 mm, for cotton fabrics 80 to 250 GSM g/m2

Manufacturer: EXNER Model: PG 80 Year of Manufacture: 2014 The EXNER PG 80 is a four-column hydraulic tool testing press for testing stamping, forming, embossing, and drawing tools. It is designed for high precision and durability, with modern proportional hydraulic control and digital force display for tool setup and testing. Technical Data Press Ram - Number of press cylinders: 2 pcs - Nominal force (adjustable): 2 × 400 kN - Return force: 2 × 150 kN - Stroke: 350 mm - Ram width: 2100 mm - Ram depth: 840 mm - Guide length: 750 mm - Ram speed under load (100%): approx. 0–10 mm/s - Ram return speed: approx. 0–20 mm/s - T-slots (DIN 650): 18 mm - T-slot pitch: 150 mm Installation Space - Installation height (top to bottom): 550 mm - Table width: 2100 mm - Table depth: 840 mm - Table T-slots (DIN 650): 18 mm - T-slot pitch: 90 mm - Table passage (W×D): 1300 × 120 mm (to be  ...

Specifications: Manufacturer: Pressta-Eisele Type: Norma 400 TU/4 Year of Make: 1996 Saw blade diameter: 400 mm Cutting length: 4,000 mm Saw motor Speed: 2,890 rpm Power: 4.5 kW Dimensions and weight Weight: 625 kg Condition Condition: Used Functional: Tested and fully functional

An originally packaged Ecoclean spray-flood cleaning system with a vacuum-tight working chamber is available. Working chamber diameter 1: 650mm, working chamber diameter 2: 750mm, max. basket dimensions 1 X/Y/Z: 670mm/480mm/300mm, max. basket dimensions 2 X/Y/Z: 670mm/480mm/400mm, max. batch weight: 150kg, max. door opening angle: 135°, max. spray pressure: 2bar, filling volume: approx. 1750l. Machine dimensions X/Y/Z: approx. 3450mm/2000mm/2700mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible. The machine has never been unpacked.

General SKU254W461 LocationBarneveld MakeExakta Pack TypeExa AF 25 No.105-20171-002-1014 Year of construction2014 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillercheck Auger fillercheck Bag fillercheck With screw dosingcheck Number of dosing heads:1 Screw diameter15 mm With motor1,5 kW, 230 volt With hoppercheck Hopper sizesDia. 500x500 mm With mixer in hoppercheck With conveyor beltcheck Information Mounted in framecheck With switchcheck Weight250 kg CEcheck Floorspace0,90 x 1,10 m Total height2,35 m Extra SpecificationsWith mobile packaging unit: type: Exa compacta 330. packaging cap: 2-8 oz, 1-2,5 lb. (57-225gr, 0,45-1,13kg) bag width: 100-280 mm. Bag seal unit, bag magazine. Total size 1,75 x 0,80 m, height 1,65 m, weight 400 kg, with Delta control, 1,2 kW, 230 v ...

General SKU404U1203 LocationBarneveld MakeEdelstahl Maurer No.208.09.006-13 Year of construction2009 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity130 ltr Vessel sizesdia. 500x668 mm Dished bottomcheck Top connectionscheck DN50 (2x) Outletdia. 33 mm With jacketcheck 11 Ltr. Max. temperature-15°C/+150°C With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L) Information Floorspace0,75x0,75 m CEcheck Total height1,40 m Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Stainless Steel ReactorsEdelstahl MaurerReact ...

General SKU385T1160 LocationBarneveld MakeEsco-Labor TypeEL-10 No.365/1 Year of construction1991 Main Features MaterialStainless steel Volume12.5 Ltr. Motor0.14 KW Specified Features - Processing vessel MaterialStainless steel Closed stirring vesselcheck Capacity±12.5 Ltr. Vessel sizesDia 240x275 mm Flat top sidecheck With covercheck Top connectionsDN 50, 12 mm(2x) Outlet28 mm Half coil jacketedcheck With anchor stirrercheck Motorindur antriebtechnik AG, 0,14 kW, 180 Volt With homogenisercheck Information Mounted on legscheck With switchgearcheck Weight180 kg Floorspace1x0,55 m Total height1,3 m Extra SpecificationsMotor on cover: esco-labor x40/38, factory no: 749, 220 Volt, 1.7kW, 22000rpm Vacuum pump : type N726.3 FT.18, NR:689428, 220 Volt, 0.15 kW Processing vesselsEsco LaborProcessing vessels > Processing vesselsBrand > Esco Labor What you can expect ...

General SKU292W971 LocationBarneveld MakeDynomill TypeECM-pilot No.050917 Year of construction2005 Main Features MaterialStainless steel Volume1.5 Ltr. Motor7.5 KW Specified Features - Sand mill MaterialStainless steel 1.4301 (304) Horizontal sand millcheck Capacity1,5 l Housing dimensions ø 130 x 150 mm Inletø 20 mm Outletø 20 mm With sievecheck With mechanical sealcheck With jacketcheck Motor7,5 kW, 400 V, (Ex), 1445 rpm Rotor speed2895 rpm With pumpcheck Information With switchcheck Weight400 kg CEcheck Floorspace0,68 x 0,74 m Total height0,58 m ATEX compatiblecheck Extra Specificationsmounted on table. cap. 10-200 l/h, cooling water consumption 800 l/h Sand millsDynomillMills > Sand millsBrand > Dynomill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

General SKU400W1243 LocationBarneveld MakeRousselet TypeEHBL 1053 DRGJ No.00313 Year of construction2002 Main Features MaterialStainless steel Motor30 KW Inlet diameter40 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity220 dm3 Basket sizesDia. 1050x680 mm Max. loading weight265 kg Motor30kW, 400/690V, 1480 rpm Max. basket speed1550 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN40 Solids outletDN150 Liquid outletDN150 MaterialStainless steel 1.4435 (316L) Information Mounted on foundation platecheck With switchgearcheck Total height2,25 m Weight8365 kg ( total 14.000kg) Floorspace2,55x2,05 m Extra SpecificationsInside container, total dimensions 6,0x3,15 m, on steel frame total weight approx 14.000 kg Peeling centrifugesRousseletCentrifuges > Peeling centrifugesBrand > Rousselet What you can expect f ...

General SKU076H343 LocationBarneveld MakeEuromilling A/S Tollose Year of constructionunknown (manufacturer tag is missing) Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Bag filter MaterialStainless steel Bag filters Silowith filter (1x) Closedcheck Capacity± 300 Ltr Diameter600mm Cylindrical height1100mm Suitable for air transportcheck Inletdia. 65mm Outlet with vibro bottom(motor 0,18 KW, 230/400 Volt) Outletdia. 150mm Information Floorspace1,0x1,0 M Total height2,9 M Weight480 KG Extra Specifications12 candles (oval) dia 180x50mm length 900mmBag filtersEuromillingDust separators > Bag filtersBrand > Euromilling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

General SKU394U1130 LocationBarneveld MakeLauda TypeTR 400 HK/HK-EX Mach.No.HKS08025 Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heatercheck (Therminol D12) Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) Information Year of construction2008 Total height2,50 m CEcheck Floorspace1,75x1,00 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

General SKU300U1003 LocationBarneveld MakeCI Electronics Type195/36 Sade P2 No.TP595 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Floorspace0,80x0,65 m CEcheck Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Miscellaneous transportCI ElectronicsConveying systems > Miscellaneous transportBrand > CI Electronics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU391U1101 LocationBarneveld MakeEsco-Labor TypeEL1 (glas) No.635/1 Year of construction1993 Pressure Vacuum possiblecheck Main Features MaterialGlass Volume1 Ltr. Motor0.75 KW Specified Features - Processing vessel MaterialGlass, Stainless steel Closed stirring vesselcheck Capacity 1 liter Vessel sizesDia. 120 mm x 150 mm Dished bottomcheck Flat top sidecheck Top connectionscheck Outletcheck With jacketcheck With anchor stirrercheck Motor65 W (3500 rpm) Speed mixing shaftmax 540 rpm With homogenisercheck Motor750 W (2800 rpm) Information Mounted on legscheck With switchgearcheck Weight40 kg Floorspace1 x 0,5 m Total height0,75 mProcessing vesselsEsco LaborProcessing vessels > Processing vesselsBrand > Esco Labor What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any  ...

General SKU300M410 LocationBarneveld MakeFuji Paudal Co.ltd TypeEXDFS-100 No.19034 Year of construction1988 Specified Features - Roll compactor MaterialStainless steel Roll compactors Granulatorcheck Flat diecheck Die sizes260 x 160mm Number of dies available:1 Die perforationdia. ± 3mm Motorcheck With variable speed drivecheck Trough sizes315 x 180mm With motorcheck With variable speed drivecheck With metering screwcheck Screw sizesdia. ± 100mm With hoppercheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,3x1,2 M Total height1,4 M Weight900 KG Technical specs Extra informationtrough sizes: 315 x 180 mm: screw dia. ± 100mm: die sizes 260 x 160 mmRoll compactorsFuji PaudalCompactors > Roll compactorsBrand > Fuji Paudal What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...